Vira Malkina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vira Malkina has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Iryna Ivanova
Dmytro Motornyi Tavria State Agrotechnological University
3 shared publications - Mykola Miroshnichenko
Dmytro Motornyi Tavria State Agrotechnological University, Zaporizhzhia, Ukraine
2 shared publications - Sergey Kiurchev
Dmytro Motornyi Tavria State Agrotechnological University
2 shared publications - Tetiana Tymoshchuk
Polissia National University
2 shared publications - О. Г. Зінов ’Єва
Таврійський державний агротехнологічний університет імені Дмитра Моторного
2 shared publications Alina Omelian
National University of Life and Environmental Sciences of Ukraine, Faculty of Food Technology and Quality Control of Agricultural Products, Department of Technologies of Meat, Fish and Seafoods, Heroiv Oborony Str., 15, Kyiv, 03040, Ukraine, Tel.: +380987846045
1 shared publication
Latest Publications
- Open Access
- 30 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (130)) , 16-25
Minimizing sweet cherry fruit losses during storage under the influence of hydrocooling and protective organic composition
Reducing fruit losses is one of the most important strategies for improving diets and strengthening food systems. Therefore, improving modern technologies for storing sweet cherries, assessing the potential of the necessary capacities and technologies for fruit storage to reduce post-harvest losses and extend the shelf life of fruits remains relevant. Improvement of pre-cooling methods optimize the shelf life of fresh fruit and contributes to the growth of demand for fruit by consumers in the European market. The object of the study is the technology of pretreatment of sweet cherry fruits using an organic composition. The fruits of the model variety Valerii Chkalov were used as experimental material. The minimum natural losses from microbiological diseases and physiological disorders were recorded on the 40th day of sweet cherry fruit storage. Fruit weight losses during storage of sweet cherries of the Valerii Chkalov variety were minimal when hydro cooling was applied in combination with a protective organic composition of lactic and acetic acid (1.75 %:2.00 %). The optimum concentration of lactic and acetic acids (2.00 %:1.75 %) was determined, which ensures minimal daily fruit losses (0.068 %) under the influence of hydro-cooling during storage of sweet cherries. The analysis of the regression model reveled the optimal value of the average level of daily losses during storage of sweet cherry fruit of Valerii Chkalov variety – 0.0642 % at concentrations of lactic and acetic acid 2.161 % to 1.705 %, respectively. The tendency to minimize sweet cherry fruit losses during storage under the influence of hydrocooling and the optimal concentration of organic acids in the protective composition was identified. The results could be used to improve pre-cooling methods in the food industry to preserve the quality of fruit raw materials in a waste-free fruit supply chain for all relevant stakeholders
- 30 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (130)) , 16-25
Open AccessMinimizing sweet cherry fruit losses during storage under the influence of hydrocooling and protective organic composition
Reducing fruit losses is one of the most important strategies for improving diets and strengthening food systems. Therefore, improving modern technologies for storing sweet cherries, assessing the potential of the necessary capacities and technologies for fruit storage to reduce post-harvest losses and extend the shelf life of fruits remains relevant. Improvement of pre-cooling methods optimize the shelf life of fresh fruit and contributes to the growth of demand for fruit by consumers in the European market. The object of the study is the technology of pretreatment of sweet cherry fruits using an organic composition. The fruits of the model variety Valerii Chkalov were used as experimental material. The minimum natural losses from microbiological diseases and physiological disorders were recorded on the 40th day of sweet cherry fruit storage. Fruit weight losses during storage of sweet cherries of the Valerii Chkalov variety were minimal when hydro cooling was applied in combination with a protective organic composition of lactic and acetic acid (1.75 %:2.00 %). The optimum concentration of lactic and acetic acids (2.00 %:1.75 %) was determined, which ensures minimal daily fruit losses (0.068 %) under the influence of hydro-cooling during storage of sweet cherries. The analysis of the regression model reveled the optimal value of the average level of daily losses during storage of sweet cherry fruit of Valerii Chkalov variety – 0.0642 % at concentrations of lactic and acetic acid 2.161 % to 1.705 %, respectively. The tendency to minimize sweet cherry fruit losses during storage under the influence of hydrocooling and the optimal concentration of organic acids in the protective composition was identified. The results could be used to improve pre-cooling methods in the food industry to preserve the quality of fruit raw materials in a waste-free fruit supply chain for all relevant stakeholders
- Open Access
- 1 January 2022
- Published by Walter de Gruyter GmbH in Agricultural Engineering
- Vol. 26 (1) , 157-166
Optimization of Parameters of a Vibroconveyor System for Infrared Drying of Soy
This paper proposes a method to determine the optimal parameters for the drying of soybean using a kinematic vibration dryer. Among the main parameters of the investigated vibroconveyor are heat and mass transfer, physical and mechanical. The paper presents a mathematical model of the dependence of parameters of the soybean drying process of soybean built based on experimental data obtained by organizing an effective experiment plan with a sufficiently large number of factor levels. To determine the rational parameters for drying soybean, it is important to build the most accurate and adequate mathematical model, which will determine the most accurate values of the required parameters. For this purpose, it is recommended to conduct an experiment with as many levels of factors as possible. The article proposes an experiment established on a dedicated balanced orthogonal plan, which is optimal according to the D-efficiency criterion. Based on the experimental data, an adequate mathematical model of the dependence of the drying characteristics of soybean (moisture of the processed material (%), temperature inside the product layer ( ° С) on the parameters – vibration amplitude (mm), distance from the conveyor surface (mm), radiation power (Wt), weight (g·min −1 ). Following the analysis of the constructed mathematical model, optimal parameters of the developed vibroconveyor infrared dryer were substantiated. The main characteristics of the vibroconveryor mechanism of interoperational transportation of bulk products in the working area were also determined, and a technical and economic analysis of the developed oscillatory system was conducted.
- 1 January 2022
- Published by Walter de Gruyter GmbH in Agricultural Engineering
- Vol. 26 (1) , 157-166
Open AccessOptimization of Parameters of a Vibroconveyor System for Infrared Drying of Soy
This paper proposes a method to determine the optimal parameters for the drying of soybean using a kinematic vibration dryer. Among the main parameters of the investigated vibroconveyor are heat and mass transfer, physical and mechanical. The paper presents a mathematical model of the dependence of parameters of the soybean drying process of soybean built based on experimental data obtained by organizing an effective experiment plan with a sufficiently large number of factor levels. To determine the rational parameters for drying soybean, it is important to build the most accurate and adequate mathematical model, which will determine the most accurate values of the required parameters. For this purpose, it is recommended to conduct an experiment with as many levels of factors as possible. The article proposes an experiment established on a dedicated balanced orthogonal plan, which is optimal according to the D-efficiency criterion. Based on the experimental data, an adequate mathematical model of the dependence of the drying characteristics of soybean (moisture of the processed material (%), temperature inside the product layer ( ° С) on the parameters – vibration amplitude (mm), distance from the conveyor surface (mm), radiation power (Wt), weight (g·min −1 ). Following the analysis of the constructed mathematical model, optimal parameters of the developed vibroconveyor infrared dryer were substantiated. The main characteristics of the vibroconveryor mechanism of interoperational transportation of bulk products in the working area were also determined, and a technical and economic analysis of the developed oscillatory system was conducted.
- Open Access
- 28 April 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 350-359
The study of soluble solids content accumulation dynamics under the influence of weather factors in the fruits of cherries
High tasting assessment of the fruit of sweet cherry is due to the favorable soluble solids content (SSC). The weather parameters and varietal features during the formation of fruit have the dominant influence on the accumulation of soluble solids. This issue has gained new relevance in the context of global climate change. The research aimed to develop a dependence of the accumulation of soluble solids of the various sorts of sweet cherries on the weather conditions of the South Steppe zone of Ukraine. Statistical analysis of the values of soluble solids in sweet cherry fruit was performed according to the average indicators of three groups of cultivars. To achieve this goal, the laboratory, factor, correlation, and regression analyses were carried out. The mathematical model was built with the application of factor and regression analysis methods, with the principal component analysis being used. The factor and regression analysis methods became the basis for the linear regression model of dependence of SSC fund accumulation on the influence of climatic parameters for the cultivar types of the three ripening terms. Based on the constructed regression models, we analyzed the degree of influence of the weather parameters on the SSC indicator by calculating the coefficients of Δi relative influence. The largest influence was set for the group of temperature and humidity parameters with the maximum share of Δi ≥9.50%. It was mathematically substantiated that the weather parameters of the last month of fruit formation had the greatest influence on the accumulation of SSC in the sweet cherry fruit, regardless of the period of ripening. For early and medium ripening sweet cherries, those were the weather parameters for May, and for those of late-term of ripening June parameters were of the maximum value.
- 28 April 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 350-359
Open AccessThe study of soluble solids content accumulation dynamics under the influence of weather factors in the fruits of cherries
High tasting assessment of the fruit of sweet cherry is due to the favorable soluble solids content (SSC). The weather parameters and varietal features during the formation of fruit have the dominant influence on the accumulation of soluble solids. This issue has gained new relevance in the context of global climate change. The research aimed to develop a dependence of the accumulation of soluble solids of the various sorts of sweet cherries on the weather conditions of the South Steppe zone of Ukraine. Statistical analysis of the values of soluble solids in sweet cherry fruit was performed according to the average indicators of three groups of cultivars. To achieve this goal, the laboratory, factor, correlation, and regression analyses were carried out. The mathematical model was built with the application of factor and regression analysis methods, with the principal component analysis being used. The factor and regression analysis methods became the basis for the linear regression model of dependence of SSC fund accumulation on the influence of climatic parameters for the cultivar types of the three ripening terms. Based on the constructed regression models, we analyzed the degree of influence of the weather parameters on the SSC indicator by calculating the coefficients of Δi relative influence. The largest influence was set for the group of temperature and humidity parameters with the maximum share of Δi ≥9.50%. It was mathematically substantiated that the weather parameters of the last month of fruit formation had the greatest influence on the accumulation of SSC in the sweet cherry fruit, regardless of the period of ripening. For early and medium ripening sweet cherries, those were the weather parameters for May, and for those of late-term of ripening June parameters were of the maximum value.
- Open Access
- 27 June 2019
- Published by Department of Informatics and Cybernetics of Melitopol Bohdan Khmelnytsky State Pedagogical University in Ukrainian Journal of Educational Studies and Information Technology
- Vol. 7 (2) , 11-19
Realization of the "Transport task" simulation software using the "Drag-and-drop" technology
The modern educational process is becoming increasingly innovative. The most important means of educational activity are computer technology learning. The development and introduction of them into the educational process is a qualitative characteristic of the computerization of education and lay the foundations for its further informatization. The article deals with the structure and content of the initial computer simulation software or the study of the "Transport task" topic, which is intended for the development of knowledge, skills and abilities of students of computer specialties in the process of studying the "Investigation of operations" discipline. The training simulation software provides multiple passage of the material at each separate stage until the correct solution is obtained. To organize the interactive learning process, the "Drag-and-drop" method is used, which, on the one hand, allows us to use more observatory visual diagrams of the problem solving algorithm, and on the other hand, concentrates the attention of students on the main stages of the algorithm and not on the implementation of bulky mathematical calculations. The simulator is designed as a local Windows application that does not require special computer resources and can be easily installed on a personal computer in an auditorium or at home. The simulator can function in two modes – practice and supervision. The simulator can be used during classes and in the process of independent work. The training simulator differs from other types of training devices by the obligatory availability of a script for verifying the actions that the student must perform in order to accomplish the task. In the process of executing actions and commands in the simulator, the verification of expected actions in the script is performed, after the result is displayed to the user. After that, in case of wrong actions, the user is given the opportunity to correct the errors. Only after correcting them, the user can go to the next stage of solving the problem. The user receives feedback and can find out about their mistakes and ability to correct them.
- 27 June 2019
- Published by Department of Informatics and Cybernetics of Melitopol Bohdan Khmelnytsky State Pedagogical University in Ukrainian Journal of Educational Studies and Information Technology
- Vol. 7 (2) , 11-19
Open AccessRealization of the "Transport task" simulation software using the "Drag-and-drop" technology
The modern educational process is becoming increasingly innovative. The most important means of educational activity are computer technology learning. The development and introduction of them into the educational process is a qualitative characteristic of the computerization of education and lay the foundations for its further informatization. The article deals with the structure and content of the initial computer simulation software or the study of the "Transport task" topic, which is intended for the development of knowledge, skills and abilities of students of computer specialties in the process of studying the "Investigation of operations" discipline. The training simulation software provides multiple passage of the material at each separate stage until the correct solution is obtained. To organize the interactive learning process, the "Drag-and-drop" method is used, which, on the one hand, allows us to use more observatory visual diagrams of the problem solving algorithm, and on the other hand, concentrates the attention of students on the main stages of the algorithm and not on the implementation of bulky mathematical calculations. The simulator is designed as a local Windows application that does not require special computer resources and can be easily installed on a personal computer in an auditorium or at home. The simulator can function in two modes – practice and supervision. The simulator can be used during classes and in the process of independent work. The training simulator differs from other types of training devices by the obligatory availability of a script for verifying the actions that the student must perform in order to accomplish the task. In the process of executing actions and commands in the simulator, the verification of expected actions in the script is performed, after the result is displayed to the user. After that, in case of wrong actions, the user is given the opportunity to correct the errors. Only after correcting them, the user can go to the next stage of solving the problem. The user receives feedback and can find out about their mistakes and ability to correct them.
- Open Access
- 1 January 2019
- Published by Academics Open Research in UKRAINIAN BLACK SEA REGION AGRARIAN SCIENCE
- Vol. 104 (4) , 38-50
Cherry yield depending on the climatic conditions of the cultivation years
УДК [634.23:551.58](477.7) DOI: 10.31521/2313-092X/2019-4(104)-5 І. Є. Іванова, кандидат сільськогосподарських наук, доцент ORCID ID: 0000-0003-2711-2021 М. Є
- 1 January 2019
- Published by Academics Open Research in UKRAINIAN BLACK SEA REGION AGRARIAN SCIENCE
- Vol. 104 (4) , 38-50
Open AccessCherry yield depending on the climatic conditions of the cultivation years
УДК [634.23:551.58](477.7) DOI: 10.31521/2313-092X/2019-4(104)-5 І. Є. Іванова, кандидат сільськогосподарських наук, доцент ORCID ID: 0000-0003-2711-2021 М. Є
- Open Access
- 30 June 2018
- Published by Department of Informatics and Cybernetics of Melitopol Bohdan Khmelnytsky State Pedagogical University in Ukrainian Journal of Educational Studies and Information Technology
- Vol. 6 (2) , 8-15
Software module for developing educational software using Drag-and-drop technology
The modern learning process is impossible without the use of the latest information and communication technologies. The integration of modern educational and information technologies is becoming an important condition for improving the learning process. From the perspective of training psychology, the use of modern technologies such as Drag-and-drop technology enhances students' work efficiency by reducing the iterative steps of the same type and focusing precisely on the algorithm or method of solving the problem Due to the fact that the implementation of the introduction of new methods of teaching modern teacher requires special knowledge in the field of programming or services programmers, there is a need to develop tools that will allow the untrained user to independently create training programs and tools. The article proposes a method for creating such a programmed environment for the development of educational software systems based on the technology Drag-and-drop and the corresponding software module. The software product offered in the article allows you to create controls – Button, Table, Picture, Text Field. Each control has settings that allow you to perform drag-and-drop actions and other properties of Drag-and-Drop objects. Each of the controls is created in the dialog mode by the user using the special commands of the program menu. The program has a user-friendly interface and is easy to use. The practical value of the development - the program module for the creation of training systems using the technology Drag-and-drop, allows a teacher who does not have special knowledge in the field of programming, create educational software independently. This will increase the efficiency of the teacher himself and the quality of the educational process.
- 30 June 2018
- Published by Department of Informatics and Cybernetics of Melitopol Bohdan Khmelnytsky State Pedagogical University in Ukrainian Journal of Educational Studies and Information Technology
- Vol. 6 (2) , 8-15
Open AccessSoftware module for developing educational software using Drag-and-drop technology
The modern learning process is impossible without the use of the latest information and communication technologies. The integration of modern educational and information technologies is becoming an important condition for improving the learning process. From the perspective of training psychology, the use of modern technologies such as Drag-and-drop technology enhances students' work efficiency by reducing the iterative steps of the same type and focusing precisely on the algorithm or method of solving the problem Due to the fact that the implementation of the introduction of new methods of teaching modern teacher requires special knowledge in the field of programming or services programmers, there is a need to develop tools that will allow the untrained user to independently create training programs and tools. The article proposes a method for creating such a programmed environment for the development of educational software systems based on the technology Drag-and-drop and the corresponding software module. The software product offered in the article allows you to create controls – Button, Table, Picture, Text Field. Each control has settings that allow you to perform drag-and-drop actions and other properties of Drag-and-Drop objects. Each of the controls is created in the dialog mode by the user using the special commands of the program menu. The program has a user-friendly interface and is easy to use. The practical value of the development - the program module for the creation of training systems using the technology Drag-and-drop, allows a teacher who does not have special knowledge in the field of programming, create educational software independently. This will increase the efficiency of the teacher himself and the quality of the educational process.