DLDavid Lopez-Bueno

David Lopez-Bueno

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


David Lopez-Bueno has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Machine learning techniques for adaptive polynomial and neural network digital predistorters

    by David López Bueno

    (English) The power amplifier (PA) is a core element in the radio transmitters to support the required mobile and fixed broadband communication link ranges. However, the PA is a power-hungry and nonlinear by nature device. Under spectrally efficient wideband modulated waveforms with high peak-to-average power ratio, the PA energy efficiency is significantly decreased since back-off operation is needed to meet the transmission quality requirements. Moreover, when employing highly efficient amplification architectures, like Doherty, load modulated balanced amplifier (LMBA) or envelope tracking (ET) PAs, the added distortion is left as an issue to be addressed at system level by a linearizer. In this context, the closed-loop adaptive digital predistorter (DPD) is a key component of the digital front-end (DFE) to counteract the PA nonlinear response under varying conditions and to cope with the inherent trade-off between linearity and efficiency. According to the fifth generation (5G) and beyond communication technologies and the proposed radio transmitter and PA architectures, the DPD may have to deal with strong nonlinearities and memory effects, in-phase and quadrature (IQ) modulator imbalances and DC offsets, additional PA supply or load modulation distortion, and multi-antenna PA input and output cross talk and beam-dependent effects. Such impairments degrade the radio access network (RAN) energy efficiency, capacity, and the number of potential RAN users due to the increased in-band and out-of-band distortion. The adaptive DPD can overcome such undesired effects but faces relevant obstacles. At every new generation of mobile communication systems, the signal bandwidth is increased and the DPD needs to be operated at higher speed. The DPD challenges are twofold. On the one hand, combining massive bandwidth operation together with handling complex multi-dimensional effects may increase exponentially the complexity of the DPD and make it both commercially unaffordable and energy inefficient due to the increased cost and power consumption at the DFE and data conversion stages. On the other hand, the adaptive DPDs need significantly larger training periods to compensate for all the undesired effects. In line with the above-mentioned challenges, the research presented in this dissertation aims at guaranteeing best DPD linearity versus efficiency trade-off in complex nonlinear scenarios, by leveraging on efficiently deployed machine learning (ML) and artificial intelligence (AI) techniques to reduce the computational complexity of DPD modeling and identification at the DFE, guaranteeing well-conditioned and robust DPD estimation, and drastically reducing the DPD training times while meeting performance requirements. To accomplish that, several newly applied and customized ML feature selection and feature extraction dimensionality reduction techniques are combined with new training data length reduction schemes, to ensure both reduced DPD behavioral modeling matrices and input datasets in single-antenna and multi-antenna adaptive polynomial and neural network DPD architectures, respectively. To validate the benefits of these contributions in accordance with the previous goals, all these techniques have been deployed and thoroughly benchmarked under adverse conditions in realistic laboratory test benches. (Català) L'amplificador de potència (PA) és un element central als radiotransmissors necessari per abastar les distàncies d'enllaç a les comunicacions sense fils de banda ampla mòbil i fixa. No obstant, el PA és un dispositiu d’elevat consum energètic i de comportament no lineal per naturalesa. Quan s’utilitzen formes d’ona de banda ampla i gran eficiència espectral que presenten elevada relació de potència de pic a potència mitjana, l’eficiència energètica del PA decreix significativament atès que és necessari operar el dispositiu amb un marge de guarda per complir amb els requisits de qualitat de transmissió. Addicionalment, quan s’utilitzen arquitectures d’amplificació altament eficients basades en PAs de tipus Doherty, modulació de càrrega d’amplificador balancejat (LMBA) o modulació d’envoltant (ET), la distorsió afegida es deixa com un problema a resoldre a nivell de sistema per un linealitzador. En aquest context, el predistorsionador digital (DPD) adaptatiu de llaç tancat és un element clau del capçal digital de processament ràdio (DFE) per contrarestar la resposta no lineal del PA en condicions variables i superar el compromís inherent entre linealitat i eficiència. D’acord amb les tecnologies de comunicació de cinquena generació (5G) i les arquitectures de transmissor i PA proposades, el DPD pot haver de tractar amb fortes no linealitats i efectes de memòria, desajustaments de modulador en fase i quadratura (IQ) i desviacions de nivell de contínua, distorsió addicional per modulació d’alimentació o càrrega del PA, efectes d’acoblament creuat a l’entrada i sortida dels PAs en sistemes multiantena, així com efectes que poden dependre de l’apuntament dels feixos de l’antena. Aquestes imperfeccions degraden l’eficiència de la xarxa d’accés ràdio (RAN), la seva capacitat i el nombre d’usuaris a causa de l’augment de distorsió generada dins de banda i fora de banda. El DPD adaptatiu pot combatre aquests efectes no desitjats però s’enfronta a obstacles rellevants. A cada nova generació de sistemes de comunicacions mòbils l’amplada de banda de senyal s’incrementa i el DPD necessita operar a majors velocitats. Els reptes imposats al DPD són doblement exigents. D’una banda, combinar amplades de banda de senyal massives amb haver de...

  • Open Access

    Agile FPGA Computing at the 5G Edge: Joint Management of Accelerated and Software Functions for Open Radio Access Technologies

    by Nikolaos Bartzoudis, José Rubio Fernández, David López-Bueno, Antonio Román Villarroel, Angelos Antonopoulos

    This paper presents ReproRun, a flexible and extensible run-time framework for the reconfiguration of functions in field programmable gate array (FPGA) devices used in popular software-defined radio (SDR) platforms. The FPGA devices embed a hardwired or soft processing system (PS) which communicates with the programmable logic (PL) using a standard embedded bus interface. In order to apply a seamless run-time partial reconfiguration, we made use of all the related building blocks, design guidelines, and tools offered by AMD-Xilinx. In ReproRun, each partial bitstream targeting a reconfigurable region (RR) of the PL area comes with its respective firmware (i.e., software functions) that runs on the PS side. Our work guarantees run-time updates of the firmware without interrupting the functionality of other software processes running in the PS or PL, by employing a specialized controller, denoted as Run-timE firmWare reconfIguration contRollEr (REWIRE). The latter leverages the open asymmetric multiprocessing framework (OpenAMP). The partial bitstreams and respective firmware are fetched from a remote location using the trivial file transfer protocol (TFTP). ReproRun can be applied in different FPGA accelerators residing in disaggregated open radio access network (RAN) equipment, adaptive radio access technologies, and Edge servers hosting virtualized functions.


  • FPGA Implementation of a Linearization System for Wideband Envelope Tracking Power Amplifiers

    by Wantao Li, Nikolaos Bartzoudis, José Rubio Fernández, David López-Bueno, Gabriel Montoro, Pere L. Gilabert

    This article focuses on the implementation of a linearization system for envelope tracking (ET) power amplifiers (PAs) in field-programmable gate array (FPGA). The ET PA linearization system includes a slew-rate reduction envelope generator, a RF leakage cancellation system in the supply envelope path and a baseband $I$ – $Q$ digital predistorter (DPD). This work targets the implementation of an ET PA linearization system on a radio frequency system-on-chip (RFSoC) device running under a demanding baseband sampling frequency of 614.4 MHz, which allows handling communication signals with up to 200 MHz bandwidth, considering a DPD bandwidth expansion by 3 $\times$ . The detail of the FPGA implementation is presented to illustrate the trade-off between hardware resources and linearization performance, i.e., adjacent channel power ratio (ACPR) and error vector magnitude (EVM), under different bit configurations for the arithmetic. The power consumption is also evaluated since it is another relevant performance indicator to be considered in the FPGA implementation of the linearization system.


  • Training Data Selection and Dimensionality Reduction for Polynomial and Artificial Neural Network MIMO Adaptive Digital Predistortion

    by David Lopez-Bueno, Gabriel Montoro, Pere L. Gilabert

    In 5G and beyond radios, the increased bandwidth, the fast-changing waveform scenarios, and the operation of large array multiple-input multiple-output (MIMO) transmitter architectures have challenged both the polynomial and the artificial neural network (ANN) MIMO adaptive digital predistortion (DPD) schemes. This article proposes training data selection methods and dimensionality reduction techniques that can be combined to enable relevant reductions of the DPD training time and the implementation complexity for MIMO transmitter architectures. In this work, the combination of an efficient uncorrelated equation selection (UES) mechanism together with orthogonal least squares (OLS) is proposed to reduce the training data length and the number of basis functions at every behavioral modeling matrix in the polynomial MIMO DPD scheme. For ANN MIMO DPD architectures, applying UES and principal component analysis (PCA) is proposed to reduce the input dataset length and features, respectively. The UES-OLS and the UES-PCA techniques are experimentally validated for a $2 \,\times\, 2$ MIMO test setup with strong power amplifier (PA) input and output crosstalk.


  • Machine Learning for Digital Front‐End

    by Pere L. Gilabert, David López‐Bueno, Thi Quynh Anh Pham, Gabriel Montoro


  • Dynamic Selection and Estimation of the Digital Predistorter Parameters for Power Amplifier Linearization

    by Quynh Anh Pham, Gabriel Montoro, David Lopez-Bueno, Pere L. Gilabert

    This paper presents a new technique that dynamically estimates and updates the coefficients of a digital predistorter (DPD) for power amplifier (PA) linearization. The proposed technique is dynamic in the sense of estimating, at every iteration of the coefficient's update, only the minimum necessary parameters according to a criterion based on the residual estimation error. At the first step, the original basis functions defining the DPD in the forward path are orthonormalized for DPD adaptation in the feedback path by means of a precalculated principal component analysis (PCA) transformation. The robustness and reliability of the precalculated PCA transformation (i.e., PCA transformation matrix obtained off line and only once) is tested and verified. Then, at the second step, a properly modified partial least squares (PLS) method, named dynamic partial least squares (DPLS), is applied to obtain the minimum and most relevant transformed components required for updating the coefficients of the DPD linearizer. The combination of the PCA transformation with the DPLS extraction of components is equivalent to a canonical correlation analysis (CCA) updating solution, which is optimum in the sense of generating components with maximum correlation (instead of maximum covariance as in the case of the DPLS extraction alone). The proposed dynamic extraction technique is evaluated and compared in terms of computational cost and performance with the commonly used QR decomposition approach for solving the least squares (LS) problem. Experimental results show that the proposed method (i.e., combining PCA with DPLS) drastically reduces the amount of DPD coefficients to be estimated while maintaining the same linearization performance.


  • Open Access

    Dynamic Selection and Update of Digital Predistorter Coefficients for Power Amplifier Linearization

    by Quynh Anh Pham, David Lopez-Bueno, Gabriel Montoro, Pere L. Gilabert

    In this paper, a new method for dynamically estimating and updating the coefficients of a digital predistortion (DPD) linearizer is presented. By means of the partial least squares (PLS) algorithm, the basis matrix used in the DPD estimation/adaptation is dynamically updated at every iteration to minimize the linearization error. Moreover, only the minimum necessary DPD coefficients being required to meet a target estimation error are computed. The proposed estimation technique is compared with the standard least squares (LS) estimation solved by using QR decomposition. Experimental results show the similar linearization performance obtained with both estimation methods, but in the case of the dynamic PLS, less coefficients are used at every iteration. Finally, the proposed algorithm allows a high level of parallelization, which makes it suitable for FPGA implementation.


  • Open Access

    Spectral Weighting Orthogonal Matching Pursuit Algorithm for Enhanced Out-of-Band Digital Predistortion Linearization

    by Pere L. Gilabert, David Lopez-Bueno, Gabriel Montoro

    This paper presents a new variant of the orthogonal matching pursuit (OMP) algorithm for reducing the computational complexity of the digital predistortion (DPD) behavioral model in the forward path. The proposed spectral weighting OMP (SW-OMP) algorithm focuses on selecting the most relevant basis functions to compensate for the out-of-band residual distortion which may eventually be masked by the dominant in-band residual error. This basis selection is carried out in an off-line process that does not affect the computational complexity of the real-time closed-loop DPD but, on the contrary, reduces its complexity while enhancing the robustness. Experimental results show that by selecting the DPD coefficients with the SW-OMP, the inherent ACLR and NMSE degradation suffered when reducing the number of coefficients is mitigated under strong nonlinear operation, when compared to using the basis functions selected by the classical OMP algorithm.


  • Open Access

    Independent Digital Predistortion Parameters Estimation Using Adaptive Principal Component Analysis

    by David Lopez-Bueno, Quynh Anh Pham, Gabriel Montoro, Pere L. Gilabert

    This paper presents an estimation/adaptation method based on the adaptive principal component analysis (APCA) technique to guarantee the identification of the minimum necessary parameters of a digital predistorter. The proposed estimation/adaptation technique is suitable for online field-programmable gate array or system on chip implementation. By exploiting the orthogonality of the resulting transformed matrix obtained with the APCA technique, it is possible to reduce the number of coefficients to be estimated which, at the same time, has a beneficial regularization effect by preventing ill-conditioning or overfitting problems. Therefore, this identification/adaptation method enhances the robustness of the parameter estimation and simplifies the adaptation by reducing the number of estimated coefficients. Due to the orthogonality of the new basis, these parameters can be estimated independently, thus allowing for scalability. Experimental results will show that it is possible to determine the minimum number of parameters to be estimated in order to meet the targeted linearity levels while ensuring a robust well-conditioned identification. Moreover, the results will show how thanks to the orthogonality property of the new basis functions, the coefficients of the digital predistorter can be estimated independently. This allows to tradeoff the digital predistorter adaptation time versus performance and hardware complexity.


  • Open Access

    Partial Least Squares Identification of Multi Look-Up Table Digital Predistorters for Concurrent Dual-Band Envelope Tracking Power Amplifiers

    by Quynh Anh Pham, David Lopez-Bueno, Teng Wang, Gabriel Montoro, Pere L. Gilabert

    This paper presents a technique to estimate the coefficients of a multiple-look-up table (LUT) digital predistortion (DPD) architecture based on the partial least-squares (PLS) regression method. The proposed 3-D distributed memory LUT architecture is suitable for efficient FPGA implementation and compensates for the distortion arising in concurrent dual-band envelope tracking power amplifiers. On the one hand, a new variant of the orthogonal matching pursuit algorithm is proposed to properly select only the best LUTs of the DPD function in the forward path, and thus reduce the number of required coefficients. On the other hand, the PLS regression method is proposed to address both the regularization problem of the coefficient estimation and, at the same time, reducing the number of coefficients to be estimated in the DPD feedback identification path. Moreover, by exploiting the orthogonality of the PLS transformed matrix, the computational complexity of the parameters' identification can be significantly simplified. Experimental results will prove how it is possible to reduce the DPD complexity (i.e., the number of coefficients) in both the forward and feedback paths while meeting the targeted linearity levels.