Michael J. Kutschke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Michael J. Kutschke has a total of 228 co-authors. Here are the top co-authors by number of shared publications:
Brett D. Owens
Department of Orthopedic Surgery, Warren Alpert Medical School of Brown University, Providence, Rhode Island, USA
3 shared publications- Edward J. Testa
Department of Orthopaedics, Brown University, Providence, Rhode Island
3 shared publications Jonathan Liu
Department of Orthopaedics, The Warren Alpert Medical School of Brown University, Providence, Rhode Island, USA
3 shared publicationsJohn D. Milner
Department of Orthopaedics, The Warren Alpert Medical School of Brown University, Providence, Rhode Island, USA
2 shared publications- Matthew Quinn
Department of Orthopaedic Surgery, The Warren Alpert Medical School of Brown University, Providence, Rhode Island, USA
2 shared publications - Paul D. Fadale
Department of Orthopedic Surgery, Warren Alpert Medical School of Brown University, Providence, Rhode Island
2 shared publications
Latest Publications
- Open Access
- 10 September 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (9)
Screw Versus Suture Bridge Fixation for Medial Femoral Condyle Osteochondritis Dissecans Demonstrate Comparable Healing Rates
Background: Fixation of unstable medial femoral condyle (MFC) osteochondritis dissecans (OCD) lesions aims to achieve osseous union while preserving the articular cartilage. Suture bridge fixation has emerged as an alternative to bioabsorbable implants or metallic headless compression screws. Hypothesis: The authors hypothesized that rates of union, conversion to a secondary cartilage restoration procedure, and patient-reported outcomes would not differ significantly between screw and suture bridge fixation, with fewer implant-related complications after suture bridge fixation. Study Design: Cohort study; Level of evidence, 3. Methods: A cohort of consecutive patients at a single center with unstable MFC OCD lesions treated with metallic headless compression screws or suture bridge constructs was studied using prospectively collected data from the multicenter Research in Osteochondritis of the Knee (ROCK) registry. Inclusion required a minimum of 6-month follow-up. Patient and lesion characteristics and surgical variables were recorded. Radiographic and advanced imaging outcomes, including magnetic resonance imaging-based healing criteria, were assessed to determine union status. Reoperation, secondary articular surface changes, conversion to a secondary cartilage restoration procedure, and patient-reported outcomes were compared between groups. Results: A total of 69 lesions were included, with a mean patient age of 14.3 ± 2.4 years. Final union status and conversion rates to a secondary cartilage restoration procedure were similar between screw (17.2%) and suture bridge (20%) fixation ( P ≥ .999), with no difference in timing of conversion (12.7 ± 8.7 vs 12.6 ± 9.2 months, respectively; P = .833). Implant removal rates were similar between screw (89.7%) and suture bridge (81.3%) groups ( P = .478); however, screw fixation was associated with earlier time to permanent implant removal (5.1 ± 4.1 vs 8.5 ± 7.8 months; P = .019), and more severe secondary articular surface changes, including International Cartilage Repair Society grade 4 defects (10.7%) observed exclusively in the screw cohort ( P < .001). No differences were observed between groups in improvement from baseline or final Pediatric International Knee Documentation Committee, Knee injury and Osteoarthritis Outcome Score subscores, or Pediatric Functional Activity Brief Scale scores. Conclusion: Metallic headless compression screw and suture bridge fixation demonstrated comparable union rates, equivalent improvements in patient-reported outcomes, and no statistically significant difference in conversion to a secondary cartilage restoration procedure in unstable MFC OCD lesions. Suture bridge fixation allowed longer implant retention with reduced secondary articular surface damage.
- 10 September 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (9)
Open AccessScrew Versus Suture Bridge Fixation for Medial Femoral Condyle Osteochondritis Dissecans Demonstrate Comparable Healing Rates
Background: Fixation of unstable medial femoral condyle (MFC) osteochondritis dissecans (OCD) lesions aims to achieve osseous union while preserving the articular cartilage. Suture bridge fixation has emerged as an alternative to bioabsorbable implants or metallic headless compression screws. Hypothesis: The authors hypothesized that rates of union, conversion to a secondary cartilage restoration procedure, and patient-reported outcomes would not differ significantly between screw and suture bridge fixation, with fewer implant-related complications after suture bridge fixation. Study Design: Cohort study; Level of evidence, 3. Methods: A cohort of consecutive patients at a single center with unstable MFC OCD lesions treated with metallic headless compression screws or suture bridge constructs was studied using prospectively collected data from the multicenter Research in Osteochondritis of the Knee (ROCK) registry. Inclusion required a minimum of 6-month follow-up. Patient and lesion characteristics and surgical variables were recorded. Radiographic and advanced imaging outcomes, including magnetic resonance imaging-based healing criteria, were assessed to determine union status. Reoperation, secondary articular surface changes, conversion to a secondary cartilage restoration procedure, and patient-reported outcomes were compared between groups. Results: A total of 69 lesions were included, with a mean patient age of 14.3 ± 2.4 years. Final union status and conversion rates to a secondary cartilage restoration procedure were similar between screw (17.2%) and suture bridge (20%) fixation ( P ≥ .999), with no difference in timing of conversion (12.7 ± 8.7 vs 12.6 ± 9.2 months, respectively; P = .833). Implant removal rates were similar between screw (89.7%) and suture bridge (81.3%) groups ( P = .478); however, screw fixation was associated with earlier time to permanent implant removal (5.1 ± 4.1 vs 8.5 ± 7.8 months; P = .019), and more severe secondary articular surface changes, including International Cartilage Repair Society grade 4 defects (10.7%) observed exclusively in the screw cohort ( P < .001). No differences were observed between groups in improvement from baseline or final Pediatric International Knee Documentation Committee, Knee injury and Osteoarthritis Outcome Score subscores, or Pediatric Functional Activity Brief Scale scores. Conclusion: Metallic headless compression screw and suture bridge fixation demonstrated comparable union rates, equivalent improvements in patient-reported outcomes, and no statistically significant difference in conversion to a secondary cartilage restoration procedure in unstable MFC OCD lesions. Suture bridge fixation allowed longer implant retention with reduced secondary articular surface damage.
- Open Access
- 27 January 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (1)
The Effects of Tibial Tuberosity-Trochlear Groove Distance on Lateral Translation of the Patella: A Cadaveric Biomechanical Study
Background: The tibial tuberosity-trochlear groove (TT-TG) distance is a key measurement in guiding surgical management of patellofemoral instability. A TT-TG of 20 mm is often used as the threshold for supplementing soft tissue procedures with tuberosity medialization, although this remains an active area of investigation. Purpose: To identify the relationship between TT-TG distance and the force required to cause lateral translation of the patella in a cadaveric model at 30º of flexion. Study Design: Descriptive laboratory study. Methods: Eight fresh-frozen human cadaveric knee specimens were acquired, and computed tomography scans were obtained to measure anatomic features of patellar instability. A flat tibial tuberosity osteotomy was performed. Specimens were mounted on an Instron ElectroPuls E10000 in 30° of flexion. The force (N) required to produce 10 mm of lateral patellar translation over a 1-second interval was measured under the following tibial tuberosity translation conditions: (1) native; (2) predetermined translation (+5, 10, and 15 mm from native); and (3) predetermined TT-TG values (10 to 25 mm by 5 mm increments). Results: For TT-TG values ≤20 mm, there was a significant negative linear relationship between the TT-TG distance and the force required for lateral patellar translation (–1.63 N/mm [95% CI, –1.637 to −1.629]; P < .001); 1 mm of TT-TG increase resulted in a 1.63 N decrease in the required force. With TT-TG testing conditions >20 mm, this linear relationship was no longer present (slope, –0.5 N/mm [95% CI, –1.36 to 0.36]; P = 0.25). Conclusion: The force required to translate the patella laterally decreased linearly as the TT-TG distance increased up to 20 mm. However, for TT-TG distances >20 mm, our model showed variability in the relationship between force and TT-TG distance. Clinical Relevance: The linear relationship identified between translational force and anatomic alignment, with TT-TG distances 20 mm confirms a threshold at which patellofemoral biomechanics are altered.
- 27 January 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (1)
Open AccessThe Effects of Tibial Tuberosity-Trochlear Groove Distance on Lateral Translation of the Patella: A Cadaveric Biomechanical Study
Background: The tibial tuberosity-trochlear groove (TT-TG) distance is a key measurement in guiding surgical management of patellofemoral instability. A TT-TG of 20 mm is often used as the threshold for supplementing soft tissue procedures with tuberosity medialization, although this remains an active area of investigation. Purpose: To identify the relationship between TT-TG distance and the force required to cause lateral translation of the patella in a cadaveric model at 30º of flexion. Study Design: Descriptive laboratory study. Methods: Eight fresh-frozen human cadaveric knee specimens were acquired, and computed tomography scans were obtained to measure anatomic features of patellar instability. A flat tibial tuberosity osteotomy was performed. Specimens were mounted on an Instron ElectroPuls E10000 in 30° of flexion. The force (N) required to produce 10 mm of lateral patellar translation over a 1-second interval was measured under the following tibial tuberosity translation conditions: (1) native; (2) predetermined translation (+5, 10, and 15 mm from native); and (3) predetermined TT-TG values (10 to 25 mm by 5 mm increments). Results: For TT-TG values ≤20 mm, there was a significant negative linear relationship between the TT-TG distance and the force required for lateral patellar translation (–1.63 N/mm [95% CI, –1.637 to −1.629]; P < .001); 1 mm of TT-TG increase resulted in a 1.63 N decrease in the required force. With TT-TG testing conditions >20 mm, this linear relationship was no longer present (slope, –0.5 N/mm [95% CI, –1.36 to 0.36]; P = 0.25). Conclusion: The force required to translate the patella laterally decreased linearly as the TT-TG distance increased up to 20 mm. However, for TT-TG distances >20 mm, our model showed variability in the relationship between force and TT-TG distance. Clinical Relevance: The linear relationship identified between translational force and anatomic alignment, with TT-TG distances 20 mm confirms a threshold at which patellofemoral biomechanics are altered.
- 11 January 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 54 (2) , 332-341
Distal Radius Allograft for Posterior Glenoid Bone Loss: A Cadaveric Graft Matching Study and Biomechanical Study
Background: Posterior glenoid reconstruction for shoulder instability is commonly performed with distal tibia allograft (DTA), but with variable results. Recent evidence shows that distal radius allograft (DRA) has a radius of curvature (ROC) that more closely matches that of the glenoid. Hypothesis: DRA would more closely match the posterior glenoid than DTA in ROC and bone mineral density (BMD), and DRA would have superior biomechanical characteristics in a posterior instability model. Study Design: Controlled laboratory study. Methods: Ten cadaveric shoulders, ankles, and wrists underwent computed tomography scans. ROC and BMD for the glenoid, DRA, and DTA were measured. Biomechanical analysis was performed for each shoulder by translating the humerus 10 mm posterior-inferiorly relative to the glenoid and recording the maximum force (N) required and lateral displacement (mm) of the humeral head. Five conditions were tested for each shoulder: intact, posterior capsulolabral tear, 30% glenoid bone loss, DRA, and DTA. Results: Ten shoulders were tested (mean age, 58.1 years [SD, 5.9 years]). The mean anterior-posterior ROC was 31.1 mm (SD, 6.9 mm) for the glenoid, compared to 14.0 mm (SD, 1.9 mm; P < .0001) for DRA, and 68.2 mm (SD, 29.1 mm; P < .0001) for DTA. The mean superior-inferior ROC was 30.2 mm (SD, 3.7 mm) for the glenoid, compared to 30.7 mm (SD, 3.2 mm; P = .901) for DRA, and 23.5 mm (SD, 5.4 mm, P < .001) for DTA. For biomechanical testing, DRA demonstrated increased resistance to force compared with the instability and bone loss states (42.1 N [SD, 14.3 N] vs capsulolabral tear 21.5 N [SD, 17.9 N; P = .002] and bone loss 14.3 N [SD, 7.8 N; P < .001], respectively). However, DRA showed no significant difference in force resistance when compared with DTA (36.3 N [SD, 9.3 N]; P = .362). Conclusion: The native glenoid ROC and BMD are more comparable with DRA than DTA. The DRA restores posterior forces comparable to those of the native glenoid and did not result in significantly greater resistance forces when compared with DTA. Clinical Relevance: These anatomic data support DRA use in posterior glenoid reconstruction.
- 11 January 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 54 (2) , 332-341
Distal Radius Allograft for Posterior Glenoid Bone Loss: A Cadaveric Graft Matching Study and Biomechanical Study
Background: Posterior glenoid reconstruction for shoulder instability is commonly performed with distal tibia allograft (DTA), but with variable results. Recent evidence shows that distal radius allograft (DRA) has a radius of curvature (ROC) that more closely matches that of the glenoid. Hypothesis: DRA would more closely match the posterior glenoid than DTA in ROC and bone mineral density (BMD), and DRA would have superior biomechanical characteristics in a posterior instability model. Study Design: Controlled laboratory study. Methods: Ten cadaveric shoulders, ankles, and wrists underwent computed tomography scans. ROC and BMD for the glenoid, DRA, and DTA were measured. Biomechanical analysis was performed for each shoulder by translating the humerus 10 mm posterior-inferiorly relative to the glenoid and recording the maximum force (N) required and lateral displacement (mm) of the humeral head. Five conditions were tested for each shoulder: intact, posterior capsulolabral tear, 30% glenoid bone loss, DRA, and DTA. Results: Ten shoulders were tested (mean age, 58.1 years [SD, 5.9 years]). The mean anterior-posterior ROC was 31.1 mm (SD, 6.9 mm) for the glenoid, compared to 14.0 mm (SD, 1.9 mm; P < .0001) for DRA, and 68.2 mm (SD, 29.1 mm; P < .0001) for DTA. The mean superior-inferior ROC was 30.2 mm (SD, 3.7 mm) for the glenoid, compared to 30.7 mm (SD, 3.2 mm; P = .901) for DRA, and 23.5 mm (SD, 5.4 mm, P < .001) for DTA. For biomechanical testing, DRA demonstrated increased resistance to force compared with the instability and bone loss states (42.1 N [SD, 14.3 N] vs capsulolabral tear 21.5 N [SD, 17.9 N; P = .002] and bone loss 14.3 N [SD, 7.8 N; P < .001], respectively). However, DRA showed no significant difference in force resistance when compared with DTA (36.3 N [SD, 9.3 N]; P = .362). Conclusion: The native glenoid ROC and BMD are more comparable with DRA than DTA. The DRA restores posterior forces comparable to those of the native glenoid and did not result in significantly greater resistance forces when compared with DTA. Clinical Relevance: These anatomic data support DRA use in posterior glenoid reconstruction.
- 17 September 2024
- Published by Wolters Kluwer Health in Journal of the American Academy of Orthopaedic Surgeons
- Vol. 33 (3) , 108-116
Personal Financial Literacy for the Orthopaedic Trainee and Early Career Surgeon: A Review of the Basics
Personal finance is a topic that has historically been shunned as a point of conversation in academia, often avoided and seldom discussed in medical training. However, this aversion leaves trainees and early career surgeons to make complex financial decisions without sufficient understanding while simultaneously facing the pressures of building an orthopaedic practice—a recipe destined for burnout. This simple review serves to equip young orthopaedic surgeons with the fundamental personal financial concepts essential for making wise financial choices early in their careers. Prompt elimination of all high-interest consumer debt and devising a strategy to address student loans are crucial first steps in establishing the foundation for personal financial success. Progressing through training and entering practice bring about enhanced personal discretionary funds that are most effectively deployed through consistent budgeting and automated saving strategies. Malpractice, disability, and life insurances are keys to protecting current and future earnings as well as preventing financial catastrophe. Augmenting these items with a functional understanding of taxation systems, tax diversification, and asset protection is essential to recognize in the early years of practice to set the trajectory for financial independence and a well-deserved retirement.
- 17 September 2024
- Published by Wolters Kluwer Health in Journal of the American Academy of Orthopaedic Surgeons
- Vol. 33 (3) , 108-116
Personal Financial Literacy for the Orthopaedic Trainee and Early Career Surgeon: A Review of the Basics
Personal finance is a topic that has historically been shunned as a point of conversation in academia, often avoided and seldom discussed in medical training. However, this aversion leaves trainees and early career surgeons to make complex financial decisions without sufficient understanding while simultaneously facing the pressures of building an orthopaedic practice—a recipe destined for burnout. This simple review serves to equip young orthopaedic surgeons with the fundamental personal financial concepts essential for making wise financial choices early in their careers. Prompt elimination of all high-interest consumer debt and devising a strategy to address student loans are crucial first steps in establishing the foundation for personal financial success. Progressing through training and entering practice bring about enhanced personal discretionary funds that are most effectively deployed through consistent budgeting and automated saving strategies. Malpractice, disability, and life insurances are keys to protecting current and future earnings as well as preventing financial catastrophe. Augmenting these items with a functional understanding of taxation systems, tax diversification, and asset protection is essential to recognize in the early years of practice to set the trajectory for financial independence and a well-deserved retirement.
- 1 July 2024
- Published by Wolters Kluwer Health in JBJS Case Connector
- Vol. 14 (3)
Staged Repair of Bilateral Isolated Teres Major Tears
Case: A 58-year-old, very active man sustained bilateral isolated teres major (TM) tendon tears when his arms were forcefully elevated overhead while wakeboarding. Staged surgical repair was performed. A progressive rehabilitation protocol was followed, and he returned to high-level activities 7 months postoperatively. At 1-year follow-up, outcome measures for bilateral shoulders were DASH 0, SST 12, ASES 100, and EQ-5D 1.0. Conclusion: Despite literature supporting conservative treatment, this case demonstrates that operative treatment of acute, isolated TM tears can result in highly successful outcomes for motivated active patients.
- 1 July 2024
- Published by Wolters Kluwer Health in JBJS Case Connector
- Vol. 14 (3)
Staged Repair of Bilateral Isolated Teres Major Tears
Case: A 58-year-old, very active man sustained bilateral isolated teres major (TM) tendon tears when his arms were forcefully elevated overhead while wakeboarding. Staged surgical repair was performed. A progressive rehabilitation protocol was followed, and he returned to high-level activities 7 months postoperatively. At 1-year follow-up, outcome measures for bilateral shoulders were DASH 0, SST 12, ASES 100, and EQ-5D 1.0. Conclusion: Despite literature supporting conservative treatment, this case demonstrates that operative treatment of acute, isolated TM tears can result in highly successful outcomes for motivated active patients.
- 21 February 2024
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 53 (1) , 210-216
Distal Tibial Allograft for the Treatment of Anterior Shoulder Instability With Glenoid Bone Loss: A Systematic Review and Meta-analysis
Background: The use of a distal tibial allograft (DTA) for reconstruction of a glenoid defect in anterior shoulder instability has grown significantly over the past decade. However, few large-scale clinical studies have investigated the clinical and radiographic outcomes of the DTA procedure. Purpose: To conduct a systematic review and meta-analysis of clinical studies with data on outcomes and complications in patients who underwent the DTA procedure for recurrent anterior shoulder instability with glenoid bone loss. Study Design: Systematic review and meta-analysis; Level of evidence, 4. Methods: A comprehensive search of major bibliographic databases was conducted for articles pertaining to the use of a DTA for the management of anterior shoulder instability with associated glenoid bone loss. Postoperative complications and outcomes were extracted and compiled in a meta-analysis. Results: Of the 8 included studies with 329 total participants, the mean patient age was 28.1 ± 10.8 years, 192 (83.8%) patients were male, and the mean follow-up was 38.4 ± 20.5 months. The overall complication rate was 7.1%, with hardware complications (3.8%) being the most common. Partial graft resorption was observed in 36.5% of the participants. Recurrent subluxation was reported in 1.2% of the participants, and recurrent dislocation prompting a reoperation was noted in 0.3% of the participants. There were significant improvements in clinical outcomes, including American Shoulder and Elbow Surgeons score (40.9-point increase; P < .01), Single Assessment Numeric Evaluation (47.2-point increase; P < .01), Western Ontario Shoulder Instability Index (49.4-point decrease; P < .01), Disabilities of the Arm, Shoulder and Hand (20.0-point decrease; P = .03), and visual analog scale (2.1-point decrease; P = .05). Additionally, postoperative shoulder range of motion significantly increased from baseline values. Conclusion: The DTA procedure was associated with a low complication rate, good clinical outcomes, and improved range of motion among patients with anterior shoulder instability and associated glenoid defects.
- 21 February 2024
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 53 (1) , 210-216
Distal Tibial Allograft for the Treatment of Anterior Shoulder Instability With Glenoid Bone Loss: A Systematic Review and Meta-analysis
Background: The use of a distal tibial allograft (DTA) for reconstruction of a glenoid defect in anterior shoulder instability has grown significantly over the past decade. However, few large-scale clinical studies have investigated the clinical and radiographic outcomes of the DTA procedure. Purpose: To conduct a systematic review and meta-analysis of clinical studies with data on outcomes and complications in patients who underwent the DTA procedure for recurrent anterior shoulder instability with glenoid bone loss. Study Design: Systematic review and meta-analysis; Level of evidence, 4. Methods: A comprehensive search of major bibliographic databases was conducted for articles pertaining to the use of a DTA for the management of anterior shoulder instability with associated glenoid bone loss. Postoperative complications and outcomes were extracted and compiled in a meta-analysis. Results: Of the 8 included studies with 329 total participants, the mean patient age was 28.1 ± 10.8 years, 192 (83.8%) patients were male, and the mean follow-up was 38.4 ± 20.5 months. The overall complication rate was 7.1%, with hardware complications (3.8%) being the most common. Partial graft resorption was observed in 36.5% of the participants. Recurrent subluxation was reported in 1.2% of the participants, and recurrent dislocation prompting a reoperation was noted in 0.3% of the participants. There were significant improvements in clinical outcomes, including American Shoulder and Elbow Surgeons score (40.9-point increase; P < .01), Single Assessment Numeric Evaluation (47.2-point increase; P < .01), Western Ontario Shoulder Instability Index (49.4-point decrease; P < .01), Disabilities of the Arm, Shoulder and Hand (20.0-point decrease; P = .03), and visual analog scale (2.1-point decrease; P = .05). Additionally, postoperative shoulder range of motion significantly increased from baseline values. Conclusion: The DTA procedure was associated with a low complication rate, good clinical outcomes, and improved range of motion among patients with anterior shoulder instability and associated glenoid defects.
- 1 January 2024
- Published by Wolters Kluwer Health in JBJS Reviews
- Vol. 12 (1)
Rotator Cuff Tears to Shoulder Instability
» The acromion is a well-studied region of the scapula that has demonstrated substantial relationships to various shoulder pathologies. » Abnormal acromial morphology is associated with rotator cuff pathology, and our understanding of this risk factor inspired acromioplasty as an adjunctive treatment for rotator cuff tears. » The acromion is linked closely to shoulder kinematics and biomechanics, as it serves as the origin for the deltoid muscle. » In degenerative shoulder disease, eccentric glenohumeral osteoarthritis has been associated with a higher, flatter acromial roof. » Increasing literature is emerging connecting morphology of the acromion with shoulder instability.
- 1 January 2024
- Published by Wolters Kluwer Health in JBJS Reviews
- Vol. 12 (1)
Rotator Cuff Tears to Shoulder Instability
» The acromion is a well-studied region of the scapula that has demonstrated substantial relationships to various shoulder pathologies. » Abnormal acromial morphology is associated with rotator cuff pathology, and our understanding of this risk factor inspired acromioplasty as an adjunctive treatment for rotator cuff tears. » The acromion is linked closely to shoulder kinematics and biomechanics, as it serves as the origin for the deltoid muscle. » In degenerative shoulder disease, eccentric glenohumeral osteoarthritis has been associated with a higher, flatter acromial roof. » Increasing literature is emerging connecting morphology of the acromion with shoulder instability.
- 13 October 2023
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 42 (3) , 638-646
Percutaneous transphyseal screw induces varus proximal femoral growth modulation in a growing pig model—A three‐dimensional analysis
Bone and joint angular deformities are common pediatric orthopedic problems that are often corrected surgically. Previous studies successfully demonstrated proximal femoral growth modulation in animal models, however outcome measurements were limited by two‐dimensional analysis. In this study, six Yorkshire cross male piglets were treated with unilateral percutaneous transphyseal screw placement across the medial aspect of the proximal femoral physis and analyzed using three‐dimensional (3D) techniques. Three primary outcome measures were considered—physis angle, version, and femoral length. Compared to paired controls, all treated femurs displayed varus correction and shortening after an average treatment period of 10 weeks. The amount of varus change was 11.6 ± 2.8° (mean ± SD) (p = 0.0002, 95% confidence interval [CI] [8.659, 14.589]) and shortening was 4.3 ± 1.6 mm (p = 0.0011, 95% CI [2.672, 5.942]). Four animals demonstrated retroversion and two demonstrated anteversion compared to controls (4.1 ± 5.4° retroversion, p = 0.1169, 95% CI [−1.483, 9.765]). The amount of varus correction was strongly correlated with the orientation of the screw relative to the medial/lateral axis of the physis (r = −0.887, p = 0.0183, 95% CI [−0.988, −0.271]). The amount and direction of version was strongly correlated with how eccentrically anterior or posterior the screw was placed relative to the center of the physis (r = −0.850, p = 0.0322, 95% CI [−0.983, −0.123]) as well as the angle of the screw relative to the posterior condylar axis of the femur (r = −0.980, p = 0.0006, 95% CI [−0.998, −0.822]). This study is the first to use 3D analysis to quantify proximal femur growth modulation and identify associations between the growth modulation outcomes and screw placement parameters.
- 13 October 2023
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 42 (3) , 638-646
Percutaneous transphyseal screw induces varus proximal femoral growth modulation in a growing pig model—A three‐dimensional analysis
Bone and joint angular deformities are common pediatric orthopedic problems that are often corrected surgically. Previous studies successfully demonstrated proximal femoral growth modulation in animal models, however outcome measurements were limited by two‐dimensional analysis. In this study, six Yorkshire cross male piglets were treated with unilateral percutaneous transphyseal screw placement across the medial aspect of the proximal femoral physis and analyzed using three‐dimensional (3D) techniques. Three primary outcome measures were considered—physis angle, version, and femoral length. Compared to paired controls, all treated femurs displayed varus correction and shortening after an average treatment period of 10 weeks. The amount of varus change was 11.6 ± 2.8° (mean ± SD) (p = 0.0002, 95% confidence interval [CI] [8.659, 14.589]) and shortening was 4.3 ± 1.6 mm (p = 0.0011, 95% CI [2.672, 5.942]). Four animals demonstrated retroversion and two demonstrated anteversion compared to controls (4.1 ± 5.4° retroversion, p = 0.1169, 95% CI [−1.483, 9.765]). The amount of varus correction was strongly correlated with the orientation of the screw relative to the medial/lateral axis of the physis (r = −0.887, p = 0.0183, 95% CI [−0.988, −0.271]). The amount and direction of version was strongly correlated with how eccentrically anterior or posterior the screw was placed relative to the center of the physis (r = −0.850, p = 0.0322, 95% CI [−0.983, −0.123]) as well as the angle of the screw relative to the posterior condylar axis of the femur (r = −0.980, p = 0.0006, 95% CI [−0.998, −0.822]). This study is the first to use 3D analysis to quantify proximal femur growth modulation and identify associations between the growth modulation outcomes and screw placement parameters.
- 18 August 2023
- Published by Elsevier
List of contributors
- 18 August 2023
- Published by Elsevier
- p. 99-102
The question