Sultanakhmed Gadzhimagomedov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sultanakhmed Gadzhimagomedov has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Zh. Kh. Murlieva
Dagestan State University
7 shared publicationsD. K. Palchaev
Dagestan State University
6 shared publications- D. K. Palchaev
Dagestan State University, Makhachkala, Russia
5 shared publications M. Kh. Rabadanov
Dagestan State University
5 shared publicationsM. E. Iskhakov
Dagestan State University
3 shared publications- Nariman M.-R. Alikhanov
Dagestan State University, Makhachkala, Russia
3 shared publications
Latest Publications
- 28 December 2025
- Published by Dagestan State University in Herald of Dagestan State University
- Vol. 40 (4)
Nanostructured Barium Zirconate-Based Ceramics: Structural Transformations and Properties
- 28 December 2025
- Published by Dagestan State University in Herald of Dagestan State University
- Vol. 40 (4)
Nanostructured Barium Zirconate-Based Ceramics: Structural Transformations and Properties
- 27 March 2025
- Published by Dagestan State University in Herald of Dagestan State University
- Vol. 40 (1)
Fabrication of Gradient Ceramics based on YBCO by Way of Heat-Treated Powders Consolidation
- 27 March 2025
- Published by Dagestan State University in Herald of Dagestan State University
- Vol. 40 (1)
Fabrication of Gradient Ceramics based on YBCO by Way of Heat-Treated Powders Consolidation
- Open Access
Porous Hybrid PVDF/BiFeO3 Smart Composite with Magnetic, Piezophotocatalytic, and Light-Emission Properties
The creation of multi-stimuli-sensitive composite polymer–inorganic materials is a practical scientific task. The combination of photoactive magneto-piezoelectric nanomaterials and ferroelectric polymers offers new properties that can help solve environmental and energy problems. Using the doctor blade casting method with the thermally induced phase separation (TIPS) technique, we synthesized a hybrid polymer–inorganic nanocomposite porous membrane based on polyvinylidene fluoride (PVDF) and bismuth ferrite (BiFeO3/BFO). We studied the samples using transmission and scanning electron microscopy (TEM/SEM), infrared Fourier spectroscopy (FTIR), total transmission and diffuse reflection, fluorescence microscopy, photoluminescence (PL), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), vibrating-sample magnetometer (VSM), and piezopotential measurements. Our results demonstrate that the addition of BFO increases the proportion of the polar phase from 76.2% to 93.8% due to surface ion–dipole interaction. We also found that the sample exhibits laser-induced fluorescence, with maxima at 475 and 665 nm depending on the presence of nanoparticles in the polymer matrix. Furthermore, our piezo-photocatalytic experiments showed that under the combined actions of ultrasonic treatment and UV–visible light irradiation, the reaction rate increased by factors of 68, 13, 4.2, and 1.6 compared to sonolysis, photolysis, piezocatalysis, and photocatalysis, respectively. This behavior is explained by the piezoelectric potential and the narrowing of the band gap of the composite due to the mechanical stress caused by ultrasound.
Open AccessPorous Hybrid PVDF/BiFeO3 Smart Composite with Magnetic, Piezophotocatalytic, and Light-Emission Properties
The creation of multi-stimuli-sensitive composite polymer–inorganic materials is a practical scientific task. The combination of photoactive magneto-piezoelectric nanomaterials and ferroelectric polymers offers new properties that can help solve environmental and energy problems. Using the doctor blade casting method with the thermally induced phase separation (TIPS) technique, we synthesized a hybrid polymer–inorganic nanocomposite porous membrane based on polyvinylidene fluoride (PVDF) and bismuth ferrite (BiFeO3/BFO). We studied the samples using transmission and scanning electron microscopy (TEM/SEM), infrared Fourier spectroscopy (FTIR), total transmission and diffuse reflection, fluorescence microscopy, photoluminescence (PL), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), vibrating-sample magnetometer (VSM), and piezopotential measurements. Our results demonstrate that the addition of BFO increases the proportion of the polar phase from 76.2% to 93.8% due to surface ion–dipole interaction. We also found that the sample exhibits laser-induced fluorescence, with maxima at 475 and 665 nm depending on the presence of nanoparticles in the polymer matrix. Furthermore, our piezo-photocatalytic experiments showed that under the combined actions of ultrasonic treatment and UV–visible light irradiation, the reaction rate increased by factors of 68, 13, 4.2, and 1.6 compared to sonolysis, photolysis, piezocatalysis, and photocatalysis, respectively. This behavior is explained by the piezoelectric potential and the narrowing of the band gap of the composite due to the mechanical stress caused by ultrasound.
- Open Access
Magnetically Separable Mixed-Phase α/γ-Fe2O3 Catalyst for Photo-Fenton-like Oxidation of Rhodamine B
Iron oxides are widely used as catalysts for photo-Fenton-like processes for dye oxidation. In this study, we report on the synthesis of an α/γ-Fe2O3 mixed-phase catalyst with magnetic properties for efficient separation. The catalyst was synthesized using glycine–nitrate precursors. The synthesized α/γ-Fe2O3 samples were characterized using scanning electron microscopy, X-ray diffraction spectroscopy (XRD), Raman shift spectroscopy, X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometer (VSM). The diffraction peaks were indexed with two phases, α-Fe2O3 as the main phase (79.6 wt.%) and γ-Fe2O3 as the secondary phase (20.4 wt.%), determined using the Rietveld refinement method. The presence of Fe2+ was attributed to oxygen vacancies. The mixed-phase α/γ-Fe2O3 catalyst exhibited remarkable photo-Fenton-like degradation performance for Rhodamine B (RhB) in neutral pH. The effects of operating parameters, including H2O2 concentration, catalyst concentration, and RhB concentration, on the degradation efficiency were investigated. The removal rates of color were 99.2% after 12 min at optimal conditions of photo-Fenton-like oxidation of RhB. The sample exhibited a high saturation magnetization of 28.6 emu/g. Additionally, the α/γ-Fe2O3 mixed-phase catalyst showed long-term stability during recycle experiments, with only a 5% decrease in activity.
Open AccessMagnetically Separable Mixed-Phase α/γ-Fe2O3 Catalyst for Photo-Fenton-like Oxidation of Rhodamine B
Iron oxides are widely used as catalysts for photo-Fenton-like processes for dye oxidation. In this study, we report on the synthesis of an α/γ-Fe2O3 mixed-phase catalyst with magnetic properties for efficient separation. The catalyst was synthesized using glycine–nitrate precursors. The synthesized α/γ-Fe2O3 samples were characterized using scanning electron microscopy, X-ray diffraction spectroscopy (XRD), Raman shift spectroscopy, X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometer (VSM). The diffraction peaks were indexed with two phases, α-Fe2O3 as the main phase (79.6 wt.%) and γ-Fe2O3 as the secondary phase (20.4 wt.%), determined using the Rietveld refinement method. The presence of Fe2+ was attributed to oxygen vacancies. The mixed-phase α/γ-Fe2O3 catalyst exhibited remarkable photo-Fenton-like degradation performance for Rhodamine B (RhB) in neutral pH. The effects of operating parameters, including H2O2 concentration, catalyst concentration, and RhB concentration, on the degradation efficiency were investigated. The removal rates of color were 99.2% after 12 min at optimal conditions of photo-Fenton-like oxidation of RhB. The sample exhibited a high saturation magnetization of 28.6 emu/g. Additionally, the α/γ-Fe2O3 mixed-phase catalyst showed long-term stability during recycle experiments, with only a 5% decrease in activity.
- 1 December 2022
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 67 (6) , 996-1000
Surface Structure of the YBa2Cu3O7 – δ Ceramics after Exposure to Plasma Flow
A series of experiments has been performed to study the effect of plasma flows of argon, nitrogen, and their mixture with oxygen, produced by a dc plasmatron with an expanding channel of the output electrode, on the surface of nanostructured YBa2Cu3O\(_{{7-\delta }}\) (YBCO) ceramics. Nanostructured ceramics S1, S2, S3, and S4 have been fabricated from YBCO powders synthesized by the sol‒gel method, followed by the heat treatment at 350°С (1 h), 910°С (20 h), and 700°C (10 h), with the following densities: ρ1 = 3.5, ρ2 = 5.5, ρ3 = 5.6, and ρ4 = 4.5 g/cm3. The surface morphology and Raman spectra of the superconducting nanostructured ceramics have been investigated before and after exposure to a plasma flow. It has been established that this exposure causes a surface modification in the form of compaction and recrystallization, as well as changes in the oxygen ordering in the structure. Molten monolithically conjugated grains have been found.- 1 December 2022
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 67 (6) , 996-1000
Surface Structure of the YBa2Cu3O7 – δ Ceramics after Exposure to Plasma Flow
A series of experiments has been performed to study the effect of plasma flows of argon, nitrogen, and their mixture with oxygen, produced by a dc plasmatron with an expanding channel of the output electrode, on the surface of nanostructured YBa2Cu3O\(_{{7-\delta }}\) (YBCO) ceramics. Nanostructured ceramics S1, S2, S3, and S4 have been fabricated from YBCO powders synthesized by the sol‒gel method, followed by the heat treatment at 350°С (1 h), 910°С (20 h), and 700°C (10 h), with the following densities: ρ1 = 3.5, ρ2 = 5.5, ρ3 = 5.6, and ρ4 = 4.5 g/cm3. The surface morphology and Raman spectra of the superconducting nanostructured ceramics have been investigated before and after exposure to a plasma flow. It has been established that this exposure causes a surface modification in the form of compaction and recrystallization, as well as changes in the oxygen ordering in the structure. Molten monolithically conjugated grains have been found.- 1 May 2019
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 64 (3) , 470-473
Synthesis of YBCO Nanopowders and Properties of Ceramics on Their Basis
The structure, morphology, density, and resistivity of nanostructured superconducting YBCO-based ceramics, fabricated from nanopowders prepared by burning nitrate-organic precursors, have...
- 1 May 2019
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 64 (3) , 470-473
Synthesis of YBCO Nanopowders and Properties of Ceramics on Their Basis
The structure, morphology, density, and resistivity of nanostructured superconducting YBCO-based ceramics, fabricated from nanopowders prepared by burning nitrate-organic precursors, have...
- 1 January 2019
- Published by Pleiades Publishing Ltd in Kristallografiâ
- Vol. 64 (3) , 442-446
Синтез нанопорошков YBCO и свойства керамик на их основе
- 1 January 2019
- Published by Pleiades Publishing Ltd in Kristallografiâ
- Vol. 64 (3) , 442-446
Синтез нанопорошков YBCO и свойства керамик на их основе
- 1 July 2017
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 43 (7) , 603-606
The effect of high-enthalpy argon plasma flow on the structure and properties of YBa2Cu3O7 – δ nanoceramics
The structure and electrical resistivity of YBa2Cu3O7 – δ-based nanostructured ceramics before and after exposure to the high-enthalpy argon plasma flow are investigated. It is demonstrated that the...
- 1 July 2017
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 43 (7) , 603-606
The effect of high-enthalpy argon plasma flow on the structure and properties of YBa2Cu3O7 – δ nanoceramics
The structure and electrical resistivity of YBa2Cu3O7 – δ-based nanostructured ceramics before and after exposure to the high-enthalpy argon plasma flow are investigated. It is demonstrated that the...
- 1 May 2017
- Published by Pleiades Publishing Ltd in High Temperature
- Vol. 55 (3) , 386-392
Influence of magnetic properties on electric resistivity of iron-group elements
A novel effective method of distinguishing between phonon and magnetic contributions into the total resistivity of 3d metals is presented. The method allows for the nonlinear character of interatomic forces and their change with temperature. Obtained results are important for quantitative estimates of the magnetic properties of ferromagnetic materials, including the nanostructured. This is illustrated by a calculation of the temperature behavior of s–d exchange interaction energy in 3d metals and by description of the temperature dependence of the resistivity of a one-threaded ferromagnetic nanowire made of Ni.
- 1 May 2017
- Published by Pleiades Publishing Ltd in High Temperature
- Vol. 55 (3) , 386-392
Influence of magnetic properties on electric resistivity of iron-group elements
A novel effective method of distinguishing between phonon and magnetic contributions into the total resistivity of 3d metals is presented. The method allows for the nonlinear character of interatomic forces and their change with temperature. Obtained results are important for quantitative estimates of the magnetic properties of ferromagnetic materials, including the nanostructured. This is illustrated by a calculation of the temperature behavior of s–d exchange interaction energy in 3d metals and by description of the temperature dependence of the resistivity of a one-threaded ferromagnetic nanowire made of Ni.