Hongzhong Liu
Hongzhong Liu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Hongmiao Tian
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China
2 shared publications Jinyou Shao
2 shared publications- Yucheng Ding
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an, China
2 shared publications - Biao Lei
School of Mechanical Engineering Xi'an Jiaotong University Xi'an 710054 China
1 shared publication - Guobo Zhao
Inspur Genersoft Company Ltd., Jinan, China
1 shared publication - Guoyong Ye
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication
Latest Publications
- 27 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 20-23
Investigation on the Influence of Macro-micro Grating Parameters on Diffraction Characteristics through FDTD Simulation
The grating is the displacement measurement standard, and the diffraction efficiency of the diffracted light of the grating mainly determines the accuracy of the displacement measurement system. In this work, through three-dimensional finite-difference time-domain (FDTD) method simulation, the diffraction efficiency of the ±1 st order diffracted light of the transmission diffraction grating under different macro complex groove types and micro surface roughness is studied, and the optimal groove type and surface roughness parameters were obtained. The research results provide a basis for the optimal design of grating manufacturing.
- 27 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 20-23
Investigation on the Influence of Macro-micro Grating Parameters on Diffraction Characteristics through FDTD Simulation
The grating is the displacement measurement standard, and the diffraction efficiency of the diffracted light of the grating mainly determines the accuracy of the displacement measurement system. In this work, through three-dimensional finite-difference time-domain (FDTD) method simulation, the diffraction efficiency of the ±1 st order diffracted light of the transmission diffraction grating under different macro complex groove types and micro surface roughness is studied, and the optimal groove type and surface roughness parameters were obtained. The research results provide a basis for the optimal design of grating manufacturing.
- Open Access
- 24 February 2014
- Published by Wiley in The Scientific World Journal
- Vol. 2014, 1-9
Formation of Arbitrary Patterns in Ultraviolet Cured Polymer Film via Electrohydrodynamic Patterning
Electrohydrodynamic patterning of arbitrary patterns is achieved by optimizing the critical parameters (applied voltage and spacer height). The applied voltage has a great influence on the fidelity of L-shaped line structures with different sizes. The L-shaped line structures with high fidelity are obtained by using the moderate applied voltage. The spacer height has a great influence on the fidelity of square structures with different sizes. The square structures with high fidelity are obtained by using the low height spacer. The multi-field coupling transient finite element simulation demonstrates that the lack of polymer owing to the high height spacer leads to the formation of defects.
- 24 February 2014
- Published by Wiley in The Scientific World Journal
- Vol. 2014, 1-9
Open AccessFormation of Arbitrary Patterns in Ultraviolet Cured Polymer Film via Electrohydrodynamic Patterning
Electrohydrodynamic patterning of arbitrary patterns is achieved by optimizing the critical parameters (applied voltage and spacer height). The applied voltage has a great influence on the fidelity of L-shaped line structures with different sizes. The L-shaped line structures with high fidelity are obtained by using the moderate applied voltage. The spacer height has a great influence on the fidelity of square structures with different sizes. The square structures with high fidelity are obtained by using the low height spacer. The multi-field coupling transient finite element simulation demonstrates that the lack of polymer owing to the high height spacer leads to the formation of defects.
- 4 July 2013
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 9 (33) , 8033-8040
Formation of irregular micro- or nano-structure with features of varying size by spatial fine-modulation of electric field
Electrically induced patterning is a process for fabricating micro- or nano-structures where a voltage is applied between a conductive template and a polymer-coated substrate, sandwiching an air gap. In the structure-forming process, the polymer film is pulled upwards non-uniformly to the template under the influence of an electric field spatially modulated by protrusions and cavities of the template pattern, being deformed into a structure positive to the template pattern. This paper explores applicability of the electrically induced patterning process in duplicating an irregular structure with features of significantly varying size from a template onto the polymer, and shows that irregular structures, such as the one composed of features with a linewidth varying from 2 μm to 20 μm, as in our experiment and numerical simulation, can be formed on the polymer by a spatially fine-modulated electric field. A ratio of modified most unstable wavelength on the characteristic length and a mass parameter are proposed in terms of the major process variables to define the regimes of spatial modulation by the electric field, i.e. under-modulation, fine-modulation and over-modulation. In addition, an experiment is also performed to duplicate clusters of cylindrical pillars and square prisms sized from 5 μm to 40 μm by tuning the process into a regime of fine-modulation. The experimental results have shown an applicability of the ratio of the modified most unstable wavelength on the characteristic length and the mass parameter in characterizing this structuring method.
- 4 July 2013
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 9 (33) , 8033-8040
Formation of irregular micro- or nano-structure with features of varying size by spatial fine-modulation of electric field
Electrically induced patterning is a process for fabricating micro- or nano-structures where a voltage is applied between a conductive template and a polymer-coated substrate, sandwiching an air gap. In the structure-forming process, the polymer film is pulled upwards non-uniformly to the template under the influence of an electric field spatially modulated by protrusions and cavities of the template pattern, being deformed into a structure positive to the template pattern. This paper explores applicability of the electrically induced patterning process in duplicating an irregular structure with features of significantly varying size from a template onto the polymer, and shows that irregular structures, such as the one composed of features with a linewidth varying from 2 μm to 20 μm, as in our experiment and numerical simulation, can be formed on the polymer by a spatially fine-modulated electric field. A ratio of modified most unstable wavelength on the characteristic length and a mass parameter are proposed in terms of the major process variables to define the regimes of spatial modulation by the electric field, i.e. under-modulation, fine-modulation and over-modulation. In addition, an experiment is also performed to duplicate clusters of cylindrical pillars and square prisms sized from 5 μm to 40 μm by tuning the process into a regime of fine-modulation. The experimental results have shown an applicability of the ratio of the modified most unstable wavelength on the characteristic length and the mass parameter in characterizing this structuring method.
- 17 January 2012
- Published by ASME International
- p. 1215-1219
Electrohydrodynamic Analysis for an Electrically Enhanced Nanoimprent Lithography
- 17 January 2012
- Published by ASME International
- p. 1215-1219
Electrohydrodynamic Analysis for an Electrically Enhanced Nanoimprent Lithography
- 17 January 2012
- Published by ASME International
- p. 1167-1171
Investigation of Electrohydrodynamic Patterning of Micro Structures at Room Temparture
- 17 January 2012
- Published by ASME International
- p. 1167-1171
Investigation of Electrohydrodynamic Patterning of Micro Structures at Room Temparture