Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Saman Naghieh has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fabrication of Cellulosic Nonwoven-Based Wound Dressings Coated with CTAB-Loaded Double Network PAMPS/PNaA Hydrogels

    by Ali Sadeghianmaryan, Saman Naghieh, Ali Salimi, Kourosh Kabiri, Monica A Cella, Ali Ahmadi

    Novel approaches have been implemented to fabricate wound dressings including electrospinning of hydrogels, and coating-based nonwoven hydrogels. In this study, only the coating technique was studied in order to fabricate wound dressing. For this purpose, nonwoven cotton fabrics were coated with layer-by-layer PNaA (poly sodium acrylate) and poly 2-Acrylamido-2-methylpropane sulfonic acid (PAMPS). Microwave techniques were then implemented to create an antibacterial activity using cetyltrimethylammonium bromide (CTAB). For the characterization, the physical, mechanical and antibacterial properties of the different samples and to determine potential wound dressing candidates, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), swelling, and water vapor permeability (WVP) tests as well as contact angle measurements with water were performed. The application of microwave techniques using CTAB on the fabricated nonwoven-based wound dressings showed potential results of creating an efficient antibacterial activity with high fibroblast cell viability. The in vitro aspirin release experiment confirmed that the release amount depended on the number of hydrogel layers. The results of physical and mechanical tests showed that coated nonwoven with layers of hydrogels had the desired strength along breathability, flexibility, and wettability. These cumulative results indicate that the fabricated structures in this work are good potential candidates for wound dressing applications.


  • Open Access

    Biofabrication Strategies for Musculoskeletal Disorders: Evolution towards Clinical Applications

    by Saman Naghieh, Gabriella Lindberg, Maryam Tamaddon, Chaozong Liu

    Biofabrication has emerged as an attractive strategy to personalise medical care and provide new treatments for common organ damage or diseases. While it has made impactful headway in e.g., skin grafting, drug testing and cancer research purposes, its application to treat musculoskeletal tissue disorders in a clinical setting remains scarce. Albeit with several in vitro breakthroughs over the past decade, standard musculoskeletal treatments are still limited to palliative care or surgical interventions with limited long-term effects and biological functionality. To better understand this lack of translation, it is important to study connections between basic science challenges and developments with translational hurdles and evolving frameworks for this fully disruptive technology that is biofabrication. This review paper thus looks closely at the processing stage of biofabrication, specifically at the bioinks suitable for musculoskeletal tissue fabrication and their trends of usage. This includes underlying composite bioink strategies to address the shortfalls of sole biomaterials. We also review recent advances made to overcome long-standing challenges in the field of biofabrication, namely bioprinting of low-viscosity bioinks, controlled delivery of growth factors, and the fabrication of spatially graded biological and structural scaffolds to help biofabricate more clinically relevant constructs. We further explore the clinical application of biofabricated musculoskeletal structures, regulatory pathways, and challenges for clinical translation, while identifying the opportunities that currently lie closest to clinical translation. In this article, we consider the next era of biofabrication and the overarching challenges that need to be addressed to reach clinical relevance.


  • Top Cited Papers
    Open Access

    Printability–A key issue in extrusion-based bioprinting

    by Saman Naghieh, Xiongbiao Chen


  • Extrusion-based printing of chitosan scaffolds and their in vitro characterization for cartilage tissue engineering

    by Ali Sadeghianmaryan, Saman Naghieh, Hamed Alizadeh Sardroud, Zahra Yazdanpanah, Younes Afzal Soltani, Jessica Sernaglia, Xiongbiao Chen


  • Micromechanisms of Cortical Bone Failure Under Different Loading Conditions

    by Nitin Kumar Sharma, Swati Sharma, Apoorv Rathi, Abhinav Kumar, Karan Vir Saini, M. D. Sarker, Saman Naghieh, Liqun Ning, Xiongbiao Chen, M D Sarker, et al.

    Bone being a hierarchical composite material has a structure varying from macro- to nanoscale. The arrangement of the components of bone material and the bonding between fibers and matrix gives rise to its unique material properties. In this study, the micromechanisms of cortical bone failure were examined under different loading conditions using scanning electron microscopy. The experimental tests were conducted in longitudinal and transverse directions of bone diaphysis under tensile as well as compressive loading. The results show that bone material has maximum stiffness under longitudinal tensile loading, while the strength is higher under transverse compressive loading. A reverse trend of compressive mechanical properties of bone is observed for longitudinal and transverse loading as compared to trends reported in the previous studies. Therefore, micromechanisms of cortical bone failure were analyzed for different loading conditions to reveal such type of behavior of cortical bone and to correlate bone microstructure with mechanical response of bone.


  • Electrospinning of polyurethane/graphene oxide for skin wound dressing and its in vitro characterization

    by Ali Sadeghianmaryan, Hamed Alizadeh Sardroud, Sanaz Allafasghari, Zahra Yazdanpanah, Saman Naghieh, Mohsen Gorji, Xiongbiao Chen

    Electrospinning polyurethane has been utilized as skin wound dressing for protecting skin wounds from infection and thus facilitating their healings, but also limited by its imperfect biocompatibility, mechanical and antibacterial properties. This paper presents our study on the addition of graphene oxide to electrospinning polyurethane for improved properties, as well as its in vitro characterization. Polyurethane/graphene oxide wound dressing was electrospun with varying amount of graphene oxide (from 0.0% to 2.0%); and in vitro tests was carried out to characterize the wound dressing properties and performance from the structural, mechanical, and biological perspectives. Scanning electron microscopy and Fourier-transform infrared spectroscopy were used to confirm the interaction between graphene oxide particles and polyurethane fibers, while the scanning electron microscopy images further illustrated that the wound dressing was of a porous structure with fibre diameters depending on the amount of graphene oxide added; specifically, 20 to 180 nm were for composite polyurethane/graphene oxide fibers and 600 to 900 nm for pure polyurethane. Our results also revealed that the hydrophilicity and swelling properties of the wound dressing could be regulated by the amount of graphene oxide added to the polyurethane/graphene oxide composites. Mechanical, antibacterial, and cytotoxicity properties of the composite polyurethane/graphene oxide wound dressing were examined with the results illustrating that the addition of graphene oxide could improve the properties of the electrospun wound dressing. Combined together, our study illustrates that electrospinning polyurethane/graphene oxide composite is promising as skin wound dressing.


  • Open Access

    Printability of 3D Printed Hydrogel Scaffolds: Influence of Hydrogel Composition and Printing Parameters

    by Saman Naghieh, Sarker, N. K. Sharma, Zohra Barhoumi, Xiongbiao Chen

    Extrusion-based bioprinting of hydrogel scaffolds is challenging due to printing-related issues, such as the lack of capability to precisely print or deposit hydrogels onto three-dimensional (3D) scaffolds as designed. Printability is an index to measure the difference between the designed and fabricated scaffold in the printing process, which, however, is still under-explored. While studies have been reported on printing hydrogel scaffolds from one or more hydrogels, there is limited knowledge on the printability of hydrogels and their printing processes. This paper presented our study on the printability of 3D printed hydrogel scaffolds, with a focus on identifying the influence of hydrogel composition and printing parameters/conditions on printability. Using the hydrogels synthesized from pure alginate or alginate with gelatin and methyl-cellulose, we examined their flow behavior and mechanical properties, as well as their influence on printability. To characterize the printability, we examined the pore size, strand diameter, and other dimensions of the printed scaffolds. We then evaluated the printability in terms of pore/strand/angular/printability and irregularity. Our results revealed that the printability could be affected by a number of factors and among them, the most important were those related to the hydrogel composition and printing parameters. This study also presented a framework to evaluate alginate hydrogel printability in a systematic manner, which can be adopted and used in the studies of other hydrogels for bioprinting.


  • Electrospinning of Scaffolds from the Polycaprolactone/Polyurethane Composite with Graphene Oxide for Skin Tissue Engineering

    by Ali Sadeghianmaryan, Yaghoub Karimi, Saman Naghieh, Hamed Alizadeh Sardroud, Mohsen Gorji, Xiongbiao Chen

    Creating scaffolds for skin tissue engineering remain challenging in terms of their mechanical and biological properties. In this paper, we present a study on the nanocomposite polyurethane (PU)/polycaprolactone (PCL) scaffolds with graphene oxide (GO), which were fabricated by using electrospinning method, for potential skin tissue engineering. For this, homogenous and soft PU nanofibers containing varying percent of polycaprolactone (12% and 15%) and nano GO (0.5–4%) were electrospun, respectively, and then characterized by different techniques/assays in vitro. For the scaffold characterization, scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used. The SEM results show the spun scaffolds have 3D porous structure (90%) with the fiber diameter increased with the GO concentration, while the FTIR results confirmed the presence of PU, PCL, and Go in the scaffolds. Also, the biocompatibility, via the cytotoxicity, of the scaffolds was examined by MTT assay with the human skin fibroblast cells, along with their wettability in terms of contact angle. Our results show that the scaffolds are biocompatible to the skin fibroblast cell, illustrating their potential use in skin tissue engineering. Also, our results illustrate that the addition of GO to the PU/PCL composite can increase the wettability (or hydrophilicity) and biocompatibility of scaffolds. Combined together, the nanocomposite PU/PCL scaffolds with GO are promising as biocompatible constructs for skin tissue engineering.


  • Assessment of Elastic-Plastic Fracture Behavior of Cortical Bone Using a Small Punch Testing Technique

    by Jagjit Singh, Nitin Kumar Sharma, M D Sarker, Saman Naghieh, Satbir Sehgal, Daniel X B Chen

    The fracture properties of cortical bone are directly coupled to its complex hierarchical structure. The limited availability of bone material from many anatomic locations creates challenges for assessing the effect of bone heterogeneity and anisotropy on fracture properties. The small punch technique was employed to examine the fracture behavior of cortical bone in terms of area under the curve values obtained from load–load point displacement behavior. Fracture toughness of cortical bone was also determined in terms of J-toughness values obtained using a compact tension (CT) test. Area under the curve values obtained from the small punch test were correlated with the J-toughness values of cortical bone. The effects of bone density and compositional parameters on area under the curve and Jtoughness values were also analyzed using linear and multiple regression analysis. Area under the curve and J-toughness values are strongly and positively correlated. Bone density and %mineral content are positively correlated with both area under the curve and J-toughness values. The multiple regression analysis outcomes support these results. Overall, the findings support the hypothesis that area under the curve values obtained from small punch tests can be used to assess the fracture behavior of cortical bone.