MAMichael H. Azarian

Michael H. Azarian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Michael H. Azarian has a total of 139 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    An Adaptive Online Diagnosis and Prognosis Approach for Digital Circuits

    by Huwei Dong, Michael H. Azarian, Michael Pecht

    Failures of digital circuits can cause significant system downtime in industry sectors including manufacturing, telecommunications, transportation, and healthcare. While testing methods are valuable to understand how failures can occur, they do not provide real-time early warnings needed to prevent catastrophic failures or forecast maintenance. This paper develops an adaptive online Prognostics and Health Management (PHM) solution for digital circuits that uses SPICE simulations and laboratory experiments to obtain circuit fault behaviors, while addressing the domain discrepancies between simulations and experimental data. The developed PHM solution achieves early fault detection by analyzing the transition behavior—the rising and falling edges—of circuit output voltage signals. Temporal, spectral, and temporal-spectral features are extracted from these transitions. Diagnosis includes fault type classification that localizes the degraded circuit components, and fault value prediction. The fault value is used in conjunction with component degradation models to make a prognosis of the circuit’s remaining useful life. The effectiveness of the approach is demonstrated through implementation on a four transistor NAND gate. The developed adaptive PHM achieves 98.6% fault-type classification accuracy and 0.12 V RMSE in fault value prediction.

  • History of the IEEE Organizational Reliability Capability Standard

    by Louis J. Gullo, Michael H. Azarian

    This is the sixth article for the Standards Column in the new Reliability Magazine. This paper summarizes the history and current status of the IEEE Reliability Society Standards Committee standard on organizational reliability capability. This is the first standard of its kind. This groundbreaking standard is IEEE 1624-2008, the IEEE Standard for Organizational Reliability Capability. This document supports IEEE 1332-1998, IEEE Standard Reliability Program for the Development and Production of Electronic Systems and Equipment.

  • Open Access

    Analysis of Standards-Based Counterfeit Microelectronics Detection Methods

    by Devon R. Richman, Michael H. Azarian, Diganta Das, Michael Pecht

    Counterfeiting of microelectronic parts is an ever-growing threat to the reliability and security of electronic systems. A study was conducted to investigate techniques for the detection of counterfeit microelectronic parts. Authentic, remarked, and cloned parts were included in the study. The data presented in this paper is the first collection of quantitative data on counterfeit testing, including the performance of individual test methods. Testing was performed by a test laboratory based on SAE AS6171 methods, and the reported results included qualitative observations and observed counterfeit defects. The study demonstrated that standards-based methods effectively detect remarked and cloned microelectronic parts. Cloned parts are of particular concern as more sophisticated versions contain fewer defects and are at risk of not being detected. Two of the cloned part numbers included in the study were found to have few counterfeit defects, all of which could be corrected by a counterfeiter to avoid detection. Insights into the performance of individual test methods based on the type of counterfeit are presented. These results contribute to the ongoing efforts to mitigate the risks from counterfeit microelectronics by continually improving testing standards and practices, such as the possible need to perform additional testing to ensure cloned parts are detected.


  • Daily Engine Performance Trending Using Common Flight Regime Identification

    by Declan P. Mallamo, Michael H. Azarian, Michael G. Pecht

    Accurate flight regime identification is critical for enhancing aircraft efficiency and safety. Traditionally, predictive models for aircraft operation have relied on complex, black-box machine learning techniques that lack transparency. This study introduces a more interpretable approach by leveraging the New Comprehensive Modular Aero-Propulsion System Simulation (N-CMAPSS) dataset and combining expanding window classification, voting schemes, and spectral clustering to detect distinct flight regimes. The method applies elastic registration to align time-shifted patterns and functional principal component analysis (FPCA) to reduce dimensionality, capturing core dynamics across flight regimes. These transformed features are fed into a genetic algorithm (GA)-assisted orthogonal matching pursuit (OMP) for sparse feature selection. Through evolutionary selection, crossover, and mutation, the most informative features are identified, enabling accurate predictions while maintaining transparency. This method outperforms more complex models in certain test cases, offering a balance between accuracy and interpretability that is essential for predictive maintenance and safety applications.


  • Open Access

    Development of PHM Algorithm of e-Latch to Prepare for the Era of Autonomous Driving

    by Mooseok Kwak, Jinwoo Nam, Kyoungtaek Kwak, Geunsoo Kim, Dongwook Choi, Jinsang Jung, Jungho Han, Gwanhee Kang, Kyeongjun Lim, Youngsoo Byun, et al.

    In self-driving vehicles linked with mobility electrification, system failures that occur suddenly in situations where customers are unaware of signs of failure are directly related to customer injuries. Securing the durability and safety of closure automation system is necessary to increase the customer's safety value so PHM technology makes it possible to predict failures and remaining life in advance during system operation. In addition, since not only various forms of new concept design styling but also innovative new handle designs are applied, it is obviously seen that e-Latch system is widely equipped in the mobility. Thus, in this paper, the study to predict the failure of e-Latch and closure system is implemented via data-driven and physics-driven method, and the algorithm for PHM to estimate remaining life of e-Latch system is also introduced.

  • Temperature-Humidity-Bias Testing and Life Prediction Modeling for Electrochemical Migration in Aerosol-Jet Printed Circuits

    by Beihan Zhao, Aniket Bharamgonda, Edwin Quinn, George Stackhouse, Jason Fleischer, Michael Osterman, Michael H. Azarian, Daniel R. Hines, Siddhartha Das, Abhijit Dasgupta

    Aerosol-Jet Printing (AJP) technology, applied to the manufacturing of printed hybrid electronics (PHE) devices, has the capability to fabricate highly complex structures with resolution in the tens-of-microns scale, creating new possibilities for the fabrication of electronic devices and assemblies. The widespread use of AJP in fabricating PHE and package-level electronics necessitates a thorough assessment of not only the performance of AJP printed electronics but also their reliability under different kinds of life-cycle operational and environmental stresses. One important hindrance to the reliability and long-term performance of such AJP electronics is electrochemical migration (ECM). ECM is an important failure mechanism in electronics under temperature and humidity conditions because it can lead to conductive dendritic growth, which can cause dielectric breakdown, leakage current, and unexpected short circuits. In this paper, the ECM propensity in conductive traces printed with AJP process, using silver-nanoparticle (AgNP) based inks, was experimentally studied using temperature-humidity-bias (THB) testing of printed test coupons. Conductive dendritic growth with complex morphologies was observed under different levels of temperature, humidity, and electric bias in the THB experiments. Weibull statistics are used to quantify the failure data, along with the corresponding confidence bounds to capture the uncertainty of the Weibull distribution. A nonmonotonic relationship between time-to-failure and electric field strength was noticed. An empirical acceleration model for ECM is proposed, by combining the classical Peck's model with a quadratic polynomial dependence on electric field strength. This model provides good estimate of acceleration factors for use conditions where the temperature, humidity, and electrical field are within the tested range, but should be extrapolated with care beyond the tested range.


  • Open Access

    Identifying Key Factors in Turbofan Engine Health Degradation using Functional Analysis

    by Declan Mallamo, Michael Azarian, Michael Pecht

    A method is presented for predicting the health of turbofan engines using data and simulations from NASA. The method involves estimating engine health using k-nearest neighbors’ regression and fitting a remaining useful life model that considers engine usage. A matching pursuit algorithm identifies key parameters, while functional principal components provide insight into degradation precursors. Model performance is evaluated using root mean square error and future research and applications are discussed.

  • Open Access

    Efficient Identification of Jiles–Atherton Model Parameters Using Space-Filling Designs and Genetic Algorithms

    by Varun Khemani, Michael H. Azarian, Michael G. Pecht

    The Jiles–Atherton model is widespread in the hysteresis description of ferromagnetic, ferroelectric, magneto strictive, and piezoelectric materials. However, the determination of model parameters is not straightforward because the model involves numerical integration and the solving of ordinary differential equations, both of which are error prone. As a result, stochastic optimization techniques have been used to explore the vast ranges of these parameters in an effort to identify the parameter values that minimize the error differential between experimental and modelled hysteresis curves. Because of the time-consuming nature of these optimization techniques, this paper explores the design space of the parameters using a space-filling design. This design provides a narrower range of parameters to look at with optimization algorithms, thereby reducing the time required to identify the optimal Jiles–Atherton model parameters. This procedure can also be carried out without using expensive hysteresis measurement devices, provided the desired transformer’s secondary voltage is known.


  • Comparison Between Synthetic Oil Lubricants for Reducing Fretting Degradation in Lightly Loaded Gold-Plated Contacts

    by Rishabh Chaudhary, Lovlesh Kaushik, Michael H. Azarian, Michael Pecht

    This article presents a comparison between the performances of two chemistries of synthetic oil lubricants, polyalphaolefins (PAOs), and perfluoropolyethers (PFPEs) when applied on gold-plated electrical contacts operating at contact loads of 9.8 centiNewton (cN) and experiencing fretting-induced degradation. Performance assessment was done using the contact resistance and coefficient of friction behavior and the surface’s response to fretting in the presence of three different lubricants, each within the two chemistries. It was found that the PAOs improved the fretting performance of the lightly loaded contacts and, statistically, were at least 50 times more reliable for a longer duration of fretting cycles than the PFPEs, suggesting their suitability for low contact load applications. At low loads, PFPEs underwent contact separation due to hydrodynamic lubrication, and the behavior was more observable among the PFPEs with higher kinematic viscosities. On the contrary, viscous PAOs had improved fretting performance and delayed time to contact failure than less viscous PAOs. The applied lubricant film thickness also contributed to the contact’s performance, and it was found that increasing the thickness of the PFPE films advanced contact failures, while thicker PAO films postponed the contact’s time to failure.


  • Open Access

    Learnable Wavelet Scattering Networks: Applications to Fault Diagnosis of Analog Circuits and Rotating Machinery

    by Varun Khemani, Michael H. Azarian, Michael G. Pecht

    Analog circuits are a critical part of industrial electronics and systems. Estimates in the literature show that, even though analog circuits comprise less than 20% of all circuits, they are responsible for more than 80% of faults. Hence, analog circuit fault diagnosis and isolation can be a valuable means of ensuring the reliability of circuits. This paper introduces a novel technique of learning time–frequency representations, using learnable wavelet scattering networks, for the fault diagnosis of circuits and rotating machinery. Wavelet scattering networks, which are fixed time–frequency representations based on existing wavelets, are modified to be learnable so that they can learn features that are optimal for fault diagnosis. The learnable wavelet scattering networks are developed using the genetic algorithm-based optimization of second-generation wavelet transform operators. The simulation and experimental results for the diagnosis of analog circuit faults demonstrates that the developed diagnosis scheme achieves greater fault diagnosis accuracy than other methods in the literature, even while considering a larger number of fault classes. The performance of the diagnosis scheme on benchmark datasets of bearing faults and gear faults shows that the developed method generalizes well to fault diagnosis in multiple domains and has good transfer learning performance, too.