Artem S. Belousov

To accelerate the transition to sustainable energy, efficient methods for CO₂-free hydrogen production and carbon utilization are needed. This study presents a new, sustainable approach for the simultaneous production of hydrogen, valuable hydrocarbons, and functional carbon materials by converting methane in low-pressure microwave plasma. Compared to traditional methane reforming methods (such as steam reforming), our plasma-based process operates at low temperatures, eliminates direct CO₂ emissions, and enables the conversion of methane into three valuable products: (1) environmentally friendly hydrogen for fuel cells and energy storage systems, (2) a range of valuable organic products (C₂H₂, C₂H₄, C₂H₆), and (3) functional carbon films with self-improving catalytic properties. Optical emission spectroscopy (OES) and the Langmuir double probe method were used for plasma diagnostics, revealing an increase in the concentration of active species (CH, Hα, C₂) and electron temperature upon argon addition. The structure, morphology, and impurity composition of the deposited films were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and inductively coupled plasma mass spectrometry (ICP-MS), respectively. Gas-phase byproducts were analyzed using gas chromatography–mass spectrometry (GC-MS). Argon addition at an Ar/CH₄ ratio of 1 leads to the formation of carbon films with a more ordered structure, as confirmed by XRD data, and improved surface morphology. It was established that argon, by effectively participating in the excitation and dissociation processes of methane molecules through energy transfer from metastable states and increased electron temperature, optimizes plasma–chemical reactions, promoting the deposition of higher-quality carbon coatings.

Combustion of fossil fuels releases harmful pollutants, particularly sulfur-containing compounds such as alkyl mercaptans, sulfides, disulfides, and thiophenes present in diesel fuel. These pollutants pose significant environmental, health, and economic challenges. Hydrodesulfurization (HDS) using heterogeneous catalysts is a widely employed refinery technique to remove sulfur from diesel. In this study, a novel RN/γ-Al₂O₃@CNTs catalyst was synthesized by incorporating 15% Raney nickel (RN), resulting in a high surface area of approximately 129 m²/g. The catalyst’s HDS performance was evaluated using diesel fuel containing 0.98% sulfur. For comparison, a RN/γ-Al₂O₃ catalyst was also prepared. The RN/γ-Al₂O₃@CNTs catalyst achieved a superior sulfur removal efficiency of 92% in batch HDS tests, significantly outperforming the 80% efficiency of RN/γ-Al₂O₃. These results highlight the potential of RN/γ-Al₂O₃@CNTs as an effective heterogeneous catalyst for improved diesel desulfurization, contributing to reduced environmental pollution.

High-purity aluminum is widely used in metallurgy, microelectronics and chemical synthesis. In this work, the method of carbothermic reduction of aluminum powder in a microwave plasma discharge with the formation of valuable organic products such as synthesis gas, acetylene and benzene was used. Al powder was studied by inductively coupled plasma mass spectrometry (ICP-MS), scanning electron microscopy (SEM) and powder X-ray diffraction (XRD). The yield of by-products was studied by gas chromatography equipped with a mass spectrometer, as well as optical emission spectroscopy of plasma discharge. High-purity aluminum powder reduced with the plasma was used to synthesize oxygen-free trimethylaluminum (TMA). For the first time, TMA was synthesized in one vacuum cycle without the system depressurizing to improve the purity of the final product. Trimethylaluminum was analyzed by gas chromatography, which confirmed that the main substance is ≥99.99% pure. Gas chromatography with a mass spectrometer was used to determine by-products and residual reaction products. Additionally, ICP-MS was used to confirm trace metal concentrations, achieving the 7N standard for ultra-high-purity materials.

This study is related to producing a set of fatty acid esters from different vegetable oils and C1–C12 alcohols. A total of 66 products were synthesized. The obtained esters were characterized by fatty acid composition, density, viscosity, saponification value, acid value, iodine value, low-temperature properties, and oxidative stability. It was established that the fatty acid composition, as well as alcohol, used has a significant impact on esters properties. Comparing physicochemical properties of fatty acid esters with existing standards and specifications, it was proposed to use esters for different industrial applications. In particular, rapeseed oil fatty acid methyl esters are an ideal candidate for application as biodiesel, while transesterification of soybean oil, sunflower oil, rapeseed oil, and coconut oil with higher alcohols led to products with promising properties as bio-lubricants. Castor oil alkyl esters could potentially be utilized as base oils due to their excellent viscosity and low-temperature properties.