ELEunhee Lim

Eunhee Lim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Eunhee Lim has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Solvent vapor annealing effect on organic solar cells based on a nonfullerene acceptor

    by Da Young Kim, Kyoungheon Park, Chang Eun Song, Eunhee Lim

    A nonfullerene acceptor, FBTT‐BORH, was synthesized based on a central core consisting of a monofluorinated benzothiadiazole unit flanked by thiophene groups with rhodanine (RH) end groups functionalized with octyl chains for use as an electron acceptor in organic solar cells (OSCs). The UV–vis absorption spectra showed that solvent vapor annealing (SVA) effectively enhanced the molecular aggregation of FBTT‐BORH compared with that of the as‐cast film. This improvement led to higher short‐circuit current densities and fill factors in OSCs fabricated using PTB7‐Th as the polymer donor and FBTT‐BORH as the acceptor. The SVA‐treated FBTT‐BORH‐based device achieved a power conversion efficiency of 6.73% and an open‐circuit voltage close to 1.0 V. To further understand the efficiency enhancement induced by SVA, the charge recombination behavior, hole and electron mobilities, and film morphologies were examined. AFM, TEM, GIWAXS, and UV–vis analyses revealed suppressed recombination, higher charge mobility, improved molecular ordering, and enhanced crystallinity relative to the as‐cast condition, providing direct evidence that SVA treatment effectively regulates molecular arrangement and promotes superior device performance.

  • Open Access

    Optimizing Alkyl Side Chains in Difluorobenzene–Rhodanine Small-Molecule Acceptors for Organic Solar Cells

    by Jongchan Choi, Chang Eun Song, Eunhee Lim

    A series of small molecules, T-2FB-T-ORH, T-2FB-T-BORH, and T-2FB-T-HDRH, were synthesized to have a thiophene-flanked difluorobenzene (T-2FB-T) core and alkyl-substituted rhodanine (RH) end groups for their use as nonfullerene acceptors (NFAs) in organic solar cells (OSCs). Octyl, 2-butyloctyl (BO), and 2-hexyldecyl (HD) alkyl side chains were introduced into RHs to control the material’s physical properties based on the length and size of the alkyl chains. The optical properties of the three NFAs were found to be almost the same, irrespective of the alkyl chain length, whereas the molecular crystallinity and material solubility significantly differed depending on the alkyl side chains. Owing to the sufficient solubility of T-2FB-T-HDRH, OSCs based on PTB7-Th and T-2FB-T-HDRH were fabricated. A power conversion efficiency of up to 4.49% was obtained by solvent vapor annealing (SVA). The AFM study revealed that improved charge mobility and a smooth and homogeneous film morphology without excessive aggregation could be obtained in the SVA-treated film.


  • Cyclohexyl-substituted non-fullerene small-molecule acceptors for organic solar cells

    by Seunggyun Hong, Chang Eun Song, Du Hyeon Ryu, Sang Kyu Lee, Won Suk Shin, Eunhee Lim

    In this paper, two cyclohexyl-substituted non-fullerene small molecules, T2-Cy6MRH and T2-Cy6PRH, are designed to have the same molecular backbone of a bithiophene (T2) core and rhodanine (RH) end groups. T2-Cy6MRH and T2-Cy6PRH can be synthesized via two and four synthesis steps, respectively, from commercially available starting materials. Thermogravimetric analysis shows that both small molecules are thermally stable at temperatures greater than 380 °C. Compared with T2-Cy6PRH, T2-Cy6MRH exhibits a higher thermal-transition temperature and a more negative enthalpy change, indicating that it exhibits greater crystallinity. Unlike T2-Cy6MRH, T2-Cy6PRH can form a uniform film via solution-processing, because the introduction of longer flexible alkyl chains endows T2-Cy6PRH with better solubility than T2-Cy6MRH. The T2-Cy6PRH film (λmax = 490 nm) exhibits complementary UV-vis absorption with the small-bandgap polymer donor PTB7-Th (λmax = 700 nm). In addition, the highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels of T2-Cy6PRH are relatively low-lying compared with those of PTB7-Th. An organic solar cell device based on T2-Cy6PRH and PTB7-Th exhibited a power conversion efficiency (PCE) of 4.60% with a high open-circuit voltage of 1.03 V. The addition of [6,6]-phenyl-C61-butyric acid methyl ester substantially improved the device performance, owing to the improved film morphology and the cascade-energy-level alignment, resulting in a PCE of 6.91% under additive- and annealing-free conditions.


  • Alkyl-Side-Chain Engineering of Nonfused Nonfullerene Acceptors with Simultaneously Improved Material Solubility and Device Performance for Organic Solar Cells

    by Taeho Lee, Chang Eun Song, Sang Kyu Lee, Won Suk Shin, Eunhee Lim

    Two nonfullerene small molecules, TBTT-BORH and TBTT-ORH, which have the same thiophene–benzothiadiazole–thiophene (TBTT) core flanked with butyloctyl (BO)- and octyl (O)-substituted rhodanines (RHs) at both ends, respectively, are developed as electron acceptors for organic solar cells (OSCs). The difference between the alkyl groups introduced into TBTT-BORH and TBTT-ORH strongly influence the intermolecular aggregation in the film state. Differential scanning calorimetry and UV–vis absorption studies reveal that TBTT-ORH exhibited stronger molecular aggregation behavior than TBTT-BORH. On the contrary, the material solubility is greatly improved by the introduction of a BO group in TBTT-BORH, and the inevitably low molecular interaction and packing ability of the as-cast TBTT-BORH film can be effectively increased by a solvent-vapor annealing (SVA) treatment. OSCs based on the two acceptors and PTB7-Th as a polymer donor are fabricated owing to their complementary absorption and sufficient energy-level offsets. The best power conversion efficiency of 8.33% is obtained with the SVA-treated TBTT-BORH device, where, together with a high open-circuit voltage of 1.02 V, the charge-carrier mobility and the short-circuit current density were greatly improved by the SVA treatment to levels comparable to those of the TBTT-ORH device because of the suppressed charge recombination and improved film morphology. In this work, the simultaneous improvement of both material solubility and device performance is achieved through alkyl side-chain engineering to balance the trade-offs among material solubility/crystallinity/device performance.


  • Open Access

    Improved Efficiency of Ternary-Blended Films in Organic Solar Cell

    by Eunhee Lim

    Eunhee Lim. Applied Science and Convergence Technology 2021;30:38-40. https://doi.org/10.5757/ASCT.2021.30.1.38

  • Exploiting Ternary Blends to Accurately Control the Coloration of Semitransparent, Non‐Fullerene, Organic Solar Cells

    by Na Gyeong An, Taeho Lee, Jungwoo Heo, Jae Won Kim, Seyeong Song, Woojin Lee, Bright Walker, Eunhee Lim, Jin Young Kim

    Semitransparent organic solar cells (STOSCs) have received increasing attention due to promising applications such as building‐integrated photovoltaics. Successful commercialization requires that STOSCs are aesthetically pleasing as well as having balanced power conversion efficiencies (PCEs) and average visible transmittances (AVTs). Non‐fullerene acceptors, which possess excellent electrical/chemical properties, have helped STOSCs to achieve high PCE and AVT; however, research related to modulating color and appearance of STOSCs has lagged behind. Herein, narrow bandgap donor and acceptor (PTB7‐Th and IEICO‐4F) and ultra‐wide bandgap acceptors (T2‐ORH and T2‐OEHRH) are used to achieve semitransparency and controllable device coloration. Blend films with controllable colors including cyan → blue → purple → reddish purple colors are successfully demonstrated, which are controlled by ratios of IEICO‐4F:T2‐ORH or IEICO‐4F:T2‐OEHRH with PTB7‐Th. By incorporating semitransparent electrodes (comprising Sb2O3/Ag/Sb2O3), STOSCs with PCEs of 6–7% are achieved for cyan, aqua, indigo, and purple and ≈4% PCEs for reddish‐purple colors, with AVTs in the range of 23–35%. Moreover, optical properties of blend films are studied via absorption and transmission measurements, whereas the range of colors achieved is quantified using commission internationale de l'éclairage (CIE) chromaticity and CIE L * a * b* color space then represented as RGB color models.


  • Open Access

    The Effects of Molecular Packing Behavior of Small-Molecule Acceptors in Ternary Organic Solar Cells

    by Eunhee Lim

    Herein, two diketopyrrolopyrrole (DPP)-based, small-molecule isomers, o- and p-DPP-PhCN, were introduced as acceptors in ternary organic solar cells (OSCs). The isomers have the same molecular backbone but differ in the positions of the cyanide (CN) substituents (ortho and para), which greatly affects their packing behavior. Ternary solar cells composed of poly(3-hexylthiophene) (P3HT):DPP-PhCN:phenyl-C61-butyric acid methyl ester (PCBM) were fabricated, and the effects of the different packing behaviors of the third component on the device performance and the working mechanism of the ternary cells were investigated. The addition of o-DPP-PhCN with a relatively high-lying lowest unoccupied molecular orbital energy level resulted in an increase in the open-circuit voltage (VOC) in the ternary devices, demonstrating the alloy-like structure of the two acceptors (o-DPP-PhCN and PCBM) in the ternary system. However, the p-DPP-PhCN-based ternary cells exhibited VOC values similar to that of a P3HT:PCBM binary cell, irrespective of the addition of p-DPP-PhCN, indicating a cascade energy-level structure in the ternary system and an effective charge transfer from the P3HT to the PCBM. Importantly, by increasing the addition of p-DPP-PhCN, the short-circuit current density increased substantially, resulting in pronounced shoulder peaks in the external quantum efficiency responses in the long-wavelength region, corresponding to the contribution of the photocurrent generated by the light absorption of p-DPP-PhCN. Despite sharing the same molecular backbone, the two DPP-PhCNs exhibited substantially different packing behaviors according to the position of their CN substituents, which also greatly affected the working mechanism of the ternary devices fabricated using the DPP-PhCNs as the third component.


  • Effect of Alkyl Substituents on DPP‐based Small Molecules for Organic Solar Cells

    by Eunhee Lim

    Two diketopyrrolopyrrole (DPP)‐based π‐conjugated small molecules, DPP4T and α‐DPP4T, were synthesized to investigate the effect of alkyl end groups on the physical properties of the molecules. The flexible alkyl end groups resulted in lower phase‐transition temperatures and enhanced solubility of α‐DPP4T. The UV–vis absorption maxima (λmax) of films of both small molecules were blue‐shifted compared with those of solutions of the molecules. More importantly, a relatively larger shift in λmax between the solution and film states and an enhanced shoulder peak in the longer‐wavelength region were observed in the spectra of the α‐DPP4T film, indicating relatively greater intermolecular packing of α‐DPP4T molecules. The enhanced device performance (in particular, a higher short‐circuit current density and better external quantum efficiency profile) of the α‐DPP4T‐based device was explained by the improved film morphology and stronger intermolecular interactions of α‐DPP4T. After device optimization, a power conversion efficiency of 2.42% was achieved using α‐DPP4T.


  • P3HT‐Based Polymer Solar Cells with Unfused Bithiophene–Rhodanine‐based Nonfullerene Acceptors

    by Eunhee Lim

    We synthesized unfused bithiophene‐based small molecules containing rhodanine (RH) dye end groups for use as acceptors in solution‐processable polymer solar cells (PSCs). T2‐ERH and T2‐ORH were designed to have different alkyl side‐chain lengths (ethyl and octyl, respectively), which enabled the optical properties and packing behavior of the corresponding films to be varied. PSCs were fabricated using poly(3‐hexylthiophene) (P3HT) and one of the small molecules as a polymer donor and an acceptor, respectively. A power conversion efficiency of 1.81% was attained with the device based on P3HT and T2‐ORH. The enhanced solubility resulting from the long octyl side chain resulted in a highly homogeneous morphology of the P3HT:T2‐ORH film. In this study, we demonstrate the easy synthesis of RH‐based bithiophenes, potentially providing a useful platform for developing nonfullerene small‐molecule acceptors.


  • Non-halogenated solvent-processed ternary-blend solar cells via alkyl-side-chain engineering of a non-fullerene acceptor and their application in large-area devices

    by Taeho Lee, Sora Oh, Shafket Rasool, Chang Eun Song, Dongwook Kim, Sang Kyu Lee, Won Suk Shin, Eunhee Lim

    Solution processability is one of the advantages of organic solar cells (OSCs). However, most high-efficiency OSCs are prepared using hazardous chlorinated solvents for the deposition of photoactive layers. The replacement of non-halogenated solvents with eco-friendly green solvents for photoactive materials is urgently required. Herein, we have developed a novel asymmetric T2-OEHRH, which is modified from the symmetric T2-ORH. The introduction of asymmetric alkyl side chains onto rhodanine end groups can effectively suppress excessive self-aggregation/crystallization and substantially improve solubility without sacrificing optoelectrical properties. Therefore, ternary-blend OSCs based on PTB7-Th:EH-IDTBR:T2-OEHRH processed using a non-halogenated solvent system exhibit a uniform and favorable morphology and give a high power conversion efficiency (PCE) of 12.10%. More importantly, we demonstrate an impressive PCE of 9.32% for large-area NFA-OSCs (substrate size = 100 cm2 and aperture size = 55.5 cm2) prepared via D-bar coating in air. To our knowledge, this PCE is the highest reported to date for NFA-based large-area OSC modules processed from a non-halogenated solvent. This asymmetric alkyl-chain engineering strategy can be exploited to develop high-performance large-area NFA-OSCs with eco-friendly solvent processing.