Michael Stephen Inkpen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Michael Stephen Inkpen has a total of 143 co-authors. Here are the top co-authors by number of shared publications:
- Tim Albrecht
University of Birmingham
12 shared publications - Nicholas J. Long
Department of Chemistry Imperial College London Molecular Sciences Research Hub London UK
10 shared publications - Latha Venkataraman
Columbia University
9 shared publications Jazmine Prana
Department of Chemistry, University of Southern California, Los Angeles, CA 90089, USA
8 shared publicationsThomas M. Czyszczon-Burton
Department of Chemistry, University of Southern California, Los Angeles, CA 90089, USA
7 shared publications- Daniel Hernangómez-Pérez
CIC nanoGUNE BRTA, Tolosa Hiribidea, 76, 20018 Donostia-San Sebastián, Spain
6 shared publications
Latest Publications
- Open Access
- 11 June 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (30) , 14745-14757
Enhanced electronic coupling in tetraaryl molecular junctions with osmium( iv ) centers
Structural motifs based on tetraphenylmethane are widely used in molecular electronic circuits, self-assembled monolayers, and porous frameworks, but their performance in conductive systems is often limited by redox-inactive, sp3-hybridized central atoms that interrupt π-conjugation. Here, we show that replacing the group 14 central atom with a tetravalent transition metal provides a design strategy to enhance electronic coupling and enable bias-dependent control of charge transport. We demonstrate this by measuring the single-molecule conductance of oligoaryl wires incorporating tetrahedral osmium(IV), silicon, or carbon centres using scanning tunnelling microscope-based break junction measurements. In non-polar solvents, junctions comprising osmium(IV) complexes exhibit a significantly reduced conductance decay with length compared to their organic analogues. In polar media, their conductance can be electrochemically modulated to values up to 80× higher than those of a silane analogue. Combined electrochemical and spectroscopic studies, supported by first-principles calculations, indicate that osmium(IV) wires exhibit more delocalized frontier orbitals and smaller HOMO-LUMO gaps, leading to well-coupled HOMO-derived transmission resonances near the electrode Fermi level. Together, these results establish transition metal tetraaryl complexes as promising building blocks for molecular circuits and extended materials.
- 11 June 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (30) , 14745-14757
Open AccessEnhanced electronic coupling in tetraaryl molecular junctions with osmium( iv ) centers
Structural motifs based on tetraphenylmethane are widely used in molecular electronic circuits, self-assembled monolayers, and porous frameworks, but their performance in conductive systems is often limited by redox-inactive, sp3-hybridized central atoms that interrupt π-conjugation. Here, we show that replacing the group 14 central atom with a tetravalent transition metal provides a design strategy to enhance electronic coupling and enable bias-dependent control of charge transport. We demonstrate this by measuring the single-molecule conductance of oligoaryl wires incorporating tetrahedral osmium(IV), silicon, or carbon centres using scanning tunnelling microscope-based break junction measurements. In non-polar solvents, junctions comprising osmium(IV) complexes exhibit a significantly reduced conductance decay with length compared to their organic analogues. In polar media, their conductance can be electrochemically modulated to values up to 80× higher than those of a silane analogue. Combined electrochemical and spectroscopic studies, supported by first-principles calculations, indicate that osmium(IV) wires exhibit more delocalized frontier orbitals and smaller HOMO-LUMO gaps, leading to well-coupled HOMO-derived transmission resonances near the electrode Fermi level. Together, these results establish transition metal tetraaryl complexes as promising building blocks for molecular circuits and extended materials.
- Open Access
- 26 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Enhanced electronic coupling in tetraaryl molecular junctions with osmium(IV) centers
Structural motifs based on tetraphenylmethane are widely used in molecular electronic circuits, self-assembled monolayers, and porous frameworks, but their performance in conductive systems is often limited by redox-inactive, sp 3 -hybridized central atoms that interrupt π-conjugation. Here, we show that replacing the group 14 central atom with a tetravalent transition metal provides a design strategy to enhance electronic coupling and enable bias-dependent control of charge transport. We demonstrate this by measuring the single-molecule conductance of oligoaryl wires incorporating tetrahedral osmium(IV), silicon, or carbon centers using scanning tunneling microscope-based break junction measurements. In non-polar solvents, junctions comprising osmium(IV) complexes exhibit a significantly reduced conductance decay with length compared to their organic analogues. In polar media, their conductance can be electrochemically modulated to values up to 80× higher than those of a silane analogue. Combined electrochemical and spectroscopic studies, supported by first-principles calculations, indicate that osmium(IV) wires exhibit more delocalized frontier orbitals and smaller HOMO-LUMO gaps, leading to well-coupled HOMO-derived transmission resonances near the electrode Fermi level. Together, these results establish transition metal tetraaryl complexes as promising building blocks for molecular circuits and extended materials.
- 26 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEnhanced electronic coupling in tetraaryl molecular junctions with osmium(IV) centers
Structural motifs based on tetraphenylmethane are widely used in molecular electronic circuits, self-assembled monolayers, and porous frameworks, but their performance in conductive systems is often limited by redox-inactive, sp 3 -hybridized central atoms that interrupt π-conjugation. Here, we show that replacing the group 14 central atom with a tetravalent transition metal provides a design strategy to enhance electronic coupling and enable bias-dependent control of charge transport. We demonstrate this by measuring the single-molecule conductance of oligoaryl wires incorporating tetrahedral osmium(IV), silicon, or carbon centers using scanning tunneling microscope-based break junction measurements. In non-polar solvents, junctions comprising osmium(IV) complexes exhibit a significantly reduced conductance decay with length compared to their organic analogues. In polar media, their conductance can be electrochemically modulated to values up to 80× higher than those of a silane analogue. Combined electrochemical and spectroscopic studies, supported by first-principles calculations, indicate that osmium(IV) wires exhibit more delocalized frontier orbitals and smaller HOMO-LUMO gaps, leading to well-coupled HOMO-derived transmission resonances near the electrode Fermi level. Together, these results establish transition metal tetraaryl complexes as promising building blocks for molecular circuits and extended materials.
- Open Access
- 18 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Isotropically conducting tetraaryl osmium(IV), silane, and methane molecular wire junctions
Structural motifs based on tetraphenylmethane have drawn substantial interest as components of molecular electronic circuits, self-assembled monolayers, and three-dimensional polymers. When appropriately functionalized these tetratopic nodes may serve as a distinct class of isotropic electrical conductors, where the transport pathway is independent of connectivity. Though the functionality of these species is currently limited by the conjugation-breaking sp3-hybridized carbon or silicon central atoms, we reasoned this could be greatly improved through exchange for a tetravalent transition metal ion; enhancing electronic coupling between the 𝜋-conjugated substituents and imparting reversible redox properties. To evaluate this hypothesis, we probe single-molecule junctions comprising oligoaryl wires with tetrahedral osmium(IV), silane, or methane centers. We find that charge transport through junctions formed from the intact organometallic species in a non-polar, inert solvent is more efficient over larger distances relative to the all-organic wires. Notably, the conductance of junctions comprising an osmium(IV) wire can also be electrochemically modulated by a factor of 47, to values 80× higher than for a silane analogue, by opening the bias window asymmetrically about the electrode Fermi level. Our experimental results are supported by first principles calculations, which predict the osmium(IV) wires can be substantially more conductive than their all-organic counterparts while also identifying specific challenges associated with modelling frozen tetraaryl compound geometries. Together, this work highlights the promising potential of transition metal tetraaryl complexes as isotropically conducting building blocks for functional circuits and extended materials.
- 18 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessIsotropically conducting tetraaryl osmium(IV), silane, and methane molecular wire junctions
Structural motifs based on tetraphenylmethane have drawn substantial interest as components of molecular electronic circuits, self-assembled monolayers, and three-dimensional polymers. When appropriately functionalized these tetratopic nodes may serve as a distinct class of isotropic electrical conductors, where the transport pathway is independent of connectivity. Though the functionality of these species is currently limited by the conjugation-breaking sp3-hybridized carbon or silicon central atoms, we reasoned this could be greatly improved through exchange for a tetravalent transition metal ion; enhancing electronic coupling between the 𝜋-conjugated substituents and imparting reversible redox properties. To evaluate this hypothesis, we probe single-molecule junctions comprising oligoaryl wires with tetrahedral osmium(IV), silane, or methane centers. We find that charge transport through junctions formed from the intact organometallic species in a non-polar, inert solvent is more efficient over larger distances relative to the all-organic wires. Notably, the conductance of junctions comprising an osmium(IV) wire can also be electrochemically modulated by a factor of 47, to values 80× higher than for a silane analogue, by opening the bias window asymmetrically about the electrode Fermi level. Our experimental results are supported by first principles calculations, which predict the osmium(IV) wires can be substantially more conductive than their all-organic counterparts while also identifying specific challenges associated with modelling frozen tetraaryl compound geometries. Together, this work highlights the promising potential of transition metal tetraaryl complexes as isotropically conducting building blocks for functional circuits and extended materials.
- Open Access
- 17 June 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (26) , 10427-10434
Forming Chemisorbed Single-Molecule Junctions through Loss of Stable Carbocations
Recent studies have found that "chemically inert" gold surfaces may drive S-C(sp3) bond cleavage reactions in thioether (-SR) linker groups, providing access to single-molecule junctions with chemisorbed Au-S contacts following the elimination of R+. Here, we demonstrate that such transformations occur more readily at elevated temperatures, rough surfaces, and in nonpolar solvents. We further show that a greater proportion of chemisorbed bonds are formed when R = -CPh3 or -C7H7 than when R = -tBu, consistent with the relative stability of [tBu]+ < [CPh3]+ ∼ [C7H7]+ carbocations. Our contact chemistry assignments are supported by first-principles transmission calculations, and we apply potential energy calculations to expose the relatively small influence of applied external electric fields on this bond breaking process. Together, this work provides a deeper understanding of reactivity at metal surfaces, of broad relevance to heterogeneous catalysis and critical to the stability and function of molecular junctions and monolayers.
- 17 June 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (26) , 10427-10434
Open AccessForming Chemisorbed Single-Molecule Junctions through Loss of Stable Carbocations
Recent studies have found that "chemically inert" gold surfaces may drive S-C(sp3) bond cleavage reactions in thioether (-SR) linker groups, providing access to single-molecule junctions with chemisorbed Au-S contacts following the elimination of R+. Here, we demonstrate that such transformations occur more readily at elevated temperatures, rough surfaces, and in nonpolar solvents. We further show that a greater proportion of chemisorbed bonds are formed when R = -CPh3 or -C7H7 than when R = -tBu, consistent with the relative stability of [tBu]+ < [CPh3]+ ∼ [C7H7]+ carbocations. Our contact chemistry assignments are supported by first-principles transmission calculations, and we apply potential energy calculations to expose the relatively small influence of applied external electric fields on this bond breaking process. Together, this work provides a deeper understanding of reactivity at metal surfaces, of broad relevance to heterogeneous catalysis and critical to the stability and function of molecular junctions and monolayers.
- Open Access
- 23 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (22) , 9125-9131
Thioether-Linked Single-Molecule Junctions with Coinage Metal Contacts
The influence of changing electrode material on the electrical and mechanical properties of metal-molecule-metal junctions is relatively poorly understood, yet an improved understanding of these interfaces remains critical to the implementation of such systems as active elements in real-world circuits. Accordingly, here we study single-molecule junctions comprising thioether-linked alkane and oligophenyl wires formed under an inert atmosphere using gold, silver, and copper electrodes. Break junction experiments and computational simulations reveal that the conductance of junctions with different contacts typically decreases in the order gold > silver ≥ copper. Such trends cannot be explained solely from the differences in work function for these metals, which are modulated in junctions by the interface dipole. Transport calculations also expose the influence of electronic coupling to the electrodes, which is strongest for gold. Together, this study charts a coherent path toward a more complete understanding of the role of the electrode in single-molecule devices.
- 23 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (22) , 9125-9131
Open AccessThioether-Linked Single-Molecule Junctions with Coinage Metal Contacts
The influence of changing electrode material on the electrical and mechanical properties of metal-molecule-metal junctions is relatively poorly understood, yet an improved understanding of these interfaces remains critical to the implementation of such systems as active elements in real-world circuits. Accordingly, here we study single-molecule junctions comprising thioether-linked alkane and oligophenyl wires formed under an inert atmosphere using gold, silver, and copper electrodes. Break junction experiments and computational simulations reveal that the conductance of junctions with different contacts typically decreases in the order gold > silver ≥ copper. Such trends cannot be explained solely from the differences in work function for these metals, which are modulated in junctions by the interface dipole. Transport calculations also expose the influence of electronic coupling to the electrodes, which is strongest for gold. Together, this study charts a coherent path toward a more complete understanding of the role of the electrode in single-molecule devices.
- Open Access
- 21 May 2025
- Published by American Chemical Society (ACS) in ACS Nanoscience Au
- Vol. 5 (4) , 269-275
Template-stripped substrates with solvent-impermeable metal thin films
Template-stripped substrates provide on-demand access to clean, ultraflat gold surfaces, avoiding the need for laborious cleaning procedures or the use of expensive single-crystal electrodes. While these gold/adhesion layer/support sandwich structures are most conveniently prepared through the application of epoxy or optical adhesives, such composites exhibit instabilities in organic solvents that limit their wider application. Here we demonstrate that substrates with solvent-impermeable metal films can be used in previously problematic chemical environments after integration into a protective, custom-built (electrochemical) flow cell. We apply our methodology to probe different self-assembled monolayers, observing reproducible alkanethiol reductive desorption features, an exemplary redox response using 6-(ferrocenyl)hexanethiol, and corroborate findings that cobalt(II) bis(terpyridine) assemblies exhibit a low coverage. This work significantly extends the utility of these substrates, relative to mechanically polished or freshly deposited alternatives, particularly for studies of systems involving adsorbed molecules whose properties are strongly influenced by the nanoscopic features of the metal-solution interface.
- 21 May 2025
- Published by American Chemical Society (ACS) in ACS Nanoscience Au
- Vol. 5 (4) , 269-275
Open AccessTemplate-stripped substrates with solvent-impermeable metal thin films
Template-stripped substrates provide on-demand access to clean, ultraflat gold surfaces, avoiding the need for laborious cleaning procedures or the use of expensive single-crystal electrodes. While these gold/adhesion layer/support sandwich structures are most conveniently prepared through the application of epoxy or optical adhesives, such composites exhibit instabilities in organic solvents that limit their wider application. Here we demonstrate that substrates with solvent-impermeable metal films can be used in previously problematic chemical environments after integration into a protective, custom-built (electrochemical) flow cell. We apply our methodology to probe different self-assembled monolayers, observing reproducible alkanethiol reductive desorption features, an exemplary redox response using 6-(ferrocenyl)hexanethiol, and corroborate findings that cobalt(II) bis(terpyridine) assemblies exhibit a low coverage. This work significantly extends the utility of these substrates, relative to mechanically polished or freshly deposited alternatives, particularly for studies of systems involving adsorbed molecules whose properties are strongly influenced by the nanoscopic features of the metal-solution interface.
- Open Access
- 26 April 2025
- Published by American Chemical Society (ACS) in ACS Physical Chemistry Au
- Vol. 5 (3) , 249-253
Conductance Measurements of Polar Molecules in a Nonconducting Solvent
Solution-based single-molecule conductance measurements of α,ω-bis(carboxylic acids) are conveniently performed using a high-boiling-point nonconducting ethereal solvent. First-principles calculations support experimental observations that linear oligoalkanes exhibit the expected exponential decay of conductance with length, whereas junctions comprising cyclic bridge hydrocarbons of different lengths and/or structures exhibit a similar conductance.
- 26 April 2025
- Published by American Chemical Society (ACS) in ACS Physical Chemistry Au
- Vol. 5 (3) , 249-253
Open AccessConductance Measurements of Polar Molecules in a Nonconducting Solvent
Solution-based single-molecule conductance measurements of α,ω-bis(carboxylic acids) are conveniently performed using a high-boiling-point nonconducting ethereal solvent. First-principles calculations support experimental observations that linear oligoalkanes exhibit the expected exponential decay of conductance with length, whereas junctions comprising cyclic bridge hydrocarbons of different lengths and/or structures exhibit a similar conductance.
- Open Access
Single‐Molecule Junctions Formed Using Different Electrode Metals Under an Inert Atmosphere
The properties of single‐molecule junctions, electronic devices approaching the limits of miniaturization, have typically been probed using inert gold electrodes. However, a complete understanding and the ultimate technological exploitation of molecular devices may only be realized if they can be readily evaluated using non‐gold electrode metals – a task broadly impeded by the rapid oxidation of such materials in the air. This study demonstrates that single‐molecule junctions can be formed using seven metals (gold, silver, copper, platinum, zinc, nickel, and cobalt) under an inert atmosphere inside a glovebox. The characteristic conductance features of atomic‐sized junctions are first identified for each metal at room‐temperature and ambient pressure, a guiding signature of nanoscale electrode formation. It is then shown that the conductance of single‐molecule junctions comprising four different components does not strongly correlate with electrode work function. Snapback measurements reveal that the size of the nanogap opened upon breaking atomic point contacts exponentially correlates with the material's melting point, a proxy for the metal diffusion constant. Together, this work exposes exciting new opportunities to experimentally probe the influence of electrode metal on the formation, stability, and function of these nanoscale structures, a critical step toward the practical utilization of molecule‐based nanoelectronic circuitry.
Open AccessSingle‐Molecule Junctions Formed Using Different Electrode Metals Under an Inert Atmosphere
The properties of single‐molecule junctions, electronic devices approaching the limits of miniaturization, have typically been probed using inert gold electrodes. However, a complete understanding and the ultimate technological exploitation of molecular devices may only be realized if they can be readily evaluated using non‐gold electrode metals – a task broadly impeded by the rapid oxidation of such materials in the air. This study demonstrates that single‐molecule junctions can be formed using seven metals (gold, silver, copper, platinum, zinc, nickel, and cobalt) under an inert atmosphere inside a glovebox. The characteristic conductance features of atomic‐sized junctions are first identified for each metal at room‐temperature and ambient pressure, a guiding signature of nanoscale electrode formation. It is then shown that the conductance of single‐molecule junctions comprising four different components does not strongly correlate with electrode work function. Snapback measurements reveal that the size of the nanogap opened upon breaking atomic point contacts exponentially correlates with the material's melting point, a proxy for the metal diffusion constant. Together, this work exposes exciting new opportunities to experimentally probe the influence of electrode metal on the formation, stability, and function of these nanoscale structures, a critical step toward the practical utilization of molecule‐based nanoelectronic circuitry.
- Open Access
- 24 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Thioether-linked single-molecule junctions with coinage metal contacts
The influence of changing electrode material on the electrical and mechanical properties of metal-molecule-metal junctions is relatively poorly understood, yet an improved understanding of these interfaces remains critical to the implementation of such systems as active elements in real-world circuits. Accordingly, here we study single-molecule junctions comprising thioether-linked alkane and oligophenyl wires formed under an inert atmosphere using gold, silver, and copper electrodes. Break junction experiments and computational simulations reveal that the conductance of junctions with different contacts typically decreases in the order gold > silver ≥ copper. Notably, such trends cannot be explained solely from the differences in work function for these metals. Transport calculations reveal the role of electronic coupling to the electrodes, which is strongest for gold. Together, this study charts a coherent path towards a more complete understanding of the role of the electrode in single-molecule devices.
- 24 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThioether-linked single-molecule junctions with coinage metal contacts
The influence of changing electrode material on the electrical and mechanical properties of metal-molecule-metal junctions is relatively poorly understood, yet an improved understanding of these interfaces remains critical to the implementation of such systems as active elements in real-world circuits. Accordingly, here we study single-molecule junctions comprising thioether-linked alkane and oligophenyl wires formed under an inert atmosphere using gold, silver, and copper electrodes. Break junction experiments and computational simulations reveal that the conductance of junctions with different contacts typically decreases in the order gold > silver ≥ copper. Notably, such trends cannot be explained solely from the differences in work function for these metals. Transport calculations reveal the role of electronic coupling to the electrodes, which is strongest for gold. Together, this study charts a coherent path towards a more complete understanding of the role of the electrode in single-molecule devices.
- Open Access
- 24 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Forming chemisorbed single-molecule junctions through loss of stable carbocations
Recent studies have found that “chemically inert” gold surfaces may drive S-C(sp3) bond cleavage reactions in thioether (-SR) linker groups, providing access to single-molecule junctions with chemisorbed Au-S contacts following the elimination of R+. Here we demonstrate that such transformations occur more readily at elevated temperatures, and perhaps surprisingly, in non-polar solvents. We further show that a greater proportion of chemisorbed bonds are formed when R = -CPh3 or -C7H7 than when R = -tBu, consistent with the relative stability of [tBu]+ <[CPh3]+ ~ [C7H7]+ carbocations. Our contact chemistry assignments are supported by first principles transmission calculations, and we apply potential energy calculations to expose the relatively small influence of applied external electric fields on this bond breaking process. Together, this work provides a deeper understanding of reactivity at metal surfaces, of broad relevance to heterogenous catalysis and critical to the stability and function of molecular junctions and monolayers.
- 24 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessForming chemisorbed single-molecule junctions through loss of stable carbocations
Recent studies have found that “chemically inert” gold surfaces may drive S-C(sp3) bond cleavage reactions in thioether (-SR) linker groups, providing access to single-molecule junctions with chemisorbed Au-S contacts following the elimination of R+. Here we demonstrate that such transformations occur more readily at elevated temperatures, and perhaps surprisingly, in non-polar solvents. We further show that a greater proportion of chemisorbed bonds are formed when R = -CPh3 or -C7H7 than when R = -tBu, consistent with the relative stability of [tBu]+ <[CPh3]+ ~ [C7H7]+ carbocations. Our contact chemistry assignments are supported by first principles transmission calculations, and we apply potential energy calculations to expose the relatively small influence of applied external electric fields on this bond breaking process. Together, this work provides a deeper understanding of reactivity at metal surfaces, of broad relevance to heterogenous catalysis and critical to the stability and function of molecular junctions and monolayers.