XZXiaolin Zhang

Xiaolin Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaolin Zhang has a total of 156 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Nanoconfinement Decouples Calcium-Enhanced Phosphate Capture from Calcium Phosphate Crystal Maturation

    by Guanju Zhuang, Shiyun Xu, Wenwen Xu, Yanyang Zhang, Zhichao Yang, Xiaolin Zhang, Bingcai Pan

    Calcium phosphate (Ca–P) scaling, which is ubiquitous in nature and in water systems, has been shown to interfere with the capture of phosphate by ferric oxide-based sorbents, thereby deteriorating their decontamination performance in repeated cycles. Here, we show that a specifically designed gel-type nanocomposite, namely HFO@N201, enables Ca-enhanced phosphate sequestration while restricting Ca–P scaling via nanoconfinement. Increasing the initial Ca2+ concentration from 0 to 160 mg/L improved phosphate uptake from ∼4.5 to ∼6.2 mg/g in the first cycle. After 20 adsorption-regeneration cycles, phosphate uptake remained at ∼6.4 mg/g in the Ca-containing system, twice that of ∼3.2 mg/g in the Ca-free system. In fixed-bed tests, the presence of Ca2+ enhanced the working capacity from ∼1350 to ∼1800 bed volumes, which could be observed again in the subsequent cycle. Asynchronous release of Fe, P, and Ca during acidic elution of P-loaded HFO@N201 indicates heterogeneous and nonstoichiometric Ca-associated phosphate retention rather than formation of a mature bulk Ca–P phase. XRD, TEM, EXAFS, and Mössbauer spectroscopy further show that the retained Ca–P species remained weakly ordered and that the nanosized ferrihydrite-like Fe phase persisted during cyclic operation. Thermodynamic analysis, classical nucleation theory, and molecular dynamics simulations further support that the nanoconfinement structure of HFO@N201 (∼2 nm) creates a low-mobility hydration environment that restricts solvent exchange, ion rearrangement, and long-range ordering, thereby stabilizing Ca–P species in a weakly ordered interfacial state. Our work demonstrates nanoconfinement as a strategy to exploit Ca-enhanced phosphate capture while reducing Ca–P scaling in regenerable sorbents.

  • Interfacial dissolution–reprecipitation: a pathway for durable immobilization of inorganic pollutants in water

    by Dan Li, Wanyi Fu, Ziyao Liu, Jiaying Chai, Xiaolin Zhang, Yanyang Zhang, Bingcai Pan

    Dissolution–reprecipitation enables durable pollutant immobilization via mineral transformation, distinct from adsorption or coprecipitation.

  • Open Access

    Built-in electric field leverages synergistic thermodynamic–kinetic enhancement for superior fixed-bed oxyanion adsorption

    by Pengfei Shen, Yidong Zhang, Huai Wang, Xiaolin Zhang, Bingcai Pan

    Fixed-bed adsorption is a widely adopted method for the removal of diverse aqueous pollutants at the industrial scale, including oxyanions such as arsenite [As(III)], arsenate [As(V)], and phosphate [P(V)]. However, owing to the inherently unsteady operating conditions, effective strategies that synergistically coregulate thermodynamics and kinetics to enhance adsorption performance remain limited. Here, we propose a generalizable approach that leverages a built-in electric field (BEF) around nanoconfined metal oxides to stabilize metastable pollutant-surface complexes, thereby optimizing both the adsorption capacity and kinetics of oxyanions to substantially improve working capacity. As a proof of concept, nanoscale hydrous zirconium oxide (HZO) was embedded inside quaternized poly(styrene-co-divinylbenzene) beads (PS + ) to prepare HZO@PS + for As(III) removal. The positively charged PS + matrix electrostatically attracts the negatively polarized oxygen atoms of adsorbed As(III), stabilizing a metastable monodentate-mononuclear As(III)-HZO complex instead of the conventional bidentate-binuclear configuration. This BEF-induced modulation maintains high adsorption selectivity while enhancing both adsorption capacity and rate. In fixed-bed column tests, the working capacity increased dramatically from 160 bed volumes (BV) for a BEF-free analogue (HZO@PS 0 ) to 1,790 BV for HZO@PS + , driven by concurrent improvements in adsorption thermodynamics and kinetics. Similar metastable surface complexes, along with substantial enhancements in adsorption performance, were also preliminarily indicated in other metal oxide-oxyanion systems, suggesting that this BEF-enabled strategy may provide a broadly applicable design principle for high-performance adsorbents suitable for fixed-bed operation.

  • Combined Process for Sustainable Water Defluoridation Without External Acid or Base Inputs

    by Guangyuan Zhu, Zhenyu Zhao, Dongxiao Sun, Xiaolin Zhang, Zhiqiang Dong, Bingcai Pan


  • Substitution–Leaching–Deposition (SLD) Processes Drive Reversible Surface Layer Reconstruction of Metal Oxides for Fluoride Adsorption

    by Pengfei Shen, Xiaolin Zhang, Hui Xu, Bingcai Pan

    Surface complexation has long been recognized as the basic mode involved in fluoride adsorption onto metal oxides. However, such general recognition is challenged by the unusual pH dependence observed in fluoride adsorption. Here, we selected hydrated zirconium oxide (HZO) as a representative metal oxide to revisit the fluoride adsorption mechanism. Multiple in situ microscopic analyses and thermodynamic simulations suggest that, unlike the adsorption of other anions that proceed exclusively via substituting protonated terminal hydroxyl (η-OH2+) groups of metal oxides, fluoride can displace both η-OH2+ and protonated bridging hydroxyl (μ-OH+) groups of HZO (i.e., Substitution). This distinctive displacement drives the leaching of Zr from HZO, generating aqueous polyfluorozirconium complexes (i.e., Leaching) which subsequently deposit onto HZO via outer-sphere complexation (i.e., Deposition). The adsorbed polyfluorozirconium gradually converts into a fluorozirconate (Na5Zr2F13) coating, resulting in a surface layer reconstruction of up to 100 nm in depth. The atypical pH dependency of fluoride adsorption can be explained by the processes of Substitution, Leaching, and Deposition (i.e., SLD processes). More attractively, the SLD-driven surface layer reconstruction is reversible in nature, ensuring the constant defluoridation capability of HZO during cyclic adsorption-desorption assays. This study advances our understanding of fluoride adsorption at water-metal oxide interfaces.


  • Effects of Chelators on Fluoride Removal by AlCl3 and Al13 Coagulation: Performance and Mechanism

    by Ziniu Deng, An Xu, Xiaolin Zhang, Kaisheng Zhang, Bingcai Pan

    Aluminum (Al) coagulation is one of the most widely used techniques for the defluoridation of industrial effluents. This study examined the influence of two common chelating agents, i.e., ethylenediaminetetraacetic acid (EDTA) and citric acid (CA), on fluoride removal during coagulation using monomeric Al (AlCl3) and polymeric aluminum species [Al13O4(OH)24(H2O)127+, Al13]. The results revealed that EDTA reduced the fluoride removal efficiency by up to 95.4% with AlCl3 and by 28.3% with Al13. In contrast, CA inhibited fluoride removal by up to 100% with AlCl3 and 90.6% with Al13. Both chelators impaired fluoride removal primarily by disrupting floc formation. Advanced analytical techniques, including 19F/27Al NMR spectroscopy combined with DFT calculations, demonstrated that this interference was due to the formation of EDTA-Al-F ternary complexes and Al-CA binary complexes. Additionally, the formation of a bridging fluoride (μ-F) in the Al13 structure enhanced its thermodynamic stability against chelators. Specifically, Al13 maintained structural stability even in the presence of up to 1.50 mmol/L EDTA, whereas CA progressively destabilized the Al13 structure by forming soluble Al-CA complexes. These findings are believed to help guide the rational design of Al-based coagulants and optimize water treatment strategies aimed at defluoridation of industrial effluents.


  • Understanding the Selective Removal of Perfluoroalkyl and Polyfluoroalkyl Substances via Fluorine–Fluorine Interactions: A Critical Review

    by Kaixing Fu, Jinjing Huang, Fang Luo, Zhuoya Fang, Deyou Yu, Xiaolin Zhang, Dawei Wang, Mingyang Xing, Jinming Luo

    As regulatory standards for per- and polyfluoroalkyl substances (PFAS) become increasingly stringent, innovative water treatment technologies are urgently demanded for effective PFAS removal. Reported sorbents often exhibit limited affinity for PFAS and are frequently hindered by competitive background substances. Recently, fluorinated sorbents (abbreviated as fluorosorbents) have emerged as a potent solution by leveraging fluorine-fluorine (F···F) interactions to enhance selectivity and efficiency in PFAS removal. This review delves into the designs and applications of fluorosorbents, emphasizing how F···F interactions improve PFAS binding affinity. Specifically, the existence of F···F interactions results in removal efficiencies orders of magnitude higher than other counterpart sorbents, particularly under competitive conditions. Furthermore, we provide a detailed analysis of the fundamental principles underlying F···F interactions and elucidate their synergistic effects with other sorption forces, which contribute to the enhanced efficacy and selectivity. Subsequently, we examine various fluorosorbents and their synthesis and fluorination techniques, underscore the importance of accurately characterizing F···F interactions through advanced analytical methods, and emphasize the significance of this interaction in developing selective sorbents. Finally, we discuss challenges and opportunities associated with employing advanced techniques to guide the design of selective sorbents and advocate for further research in the development of sustainable and cost-effective treatment technologies leveraging F···F interactions.