Gladys Cristina Dominguez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gladys Cristina Dominguez has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Luís Antônio de Arruda Aidar
Department of Orthodontics Universidade Santa Cecília Santos Brazil
4 shared publications - Helio Kiitiro Yamashita
Universidade Federal de São Paulo, Department of Imaging Diagnosis, São Paulo, Brazil
3 shared publications - José Augusto Mendes Miguel
Universidade do Estado do Rio de Janeiro, Brazil
3 shared publications - Renata de Faria Santos
Universidade de São Paulo, Brazil
3 shared publications - Angela Maria Borri Wolosker
Graduate Program in Medicine (Clinical Radiology) Universidade Federal de São Paulo (UNIFESP) São Paulo Brazil
2 shared publications - Bruna Maluza Florez
Department of Orthodontics Universidade Santa Cecília Santos Brazil
2 shared publications
Latest Publications
- 15 March 2024
- Published by Dental Press International in Clinical Orthodontics
- Vol. 23 (1) , 10-33
Entrevista com Sílvia Reis
Foi minha aluna! Quantas vezes, ao assistir uma palestra de algum dos muitos professores que foram meus alunos, tenho esse pensamento ou comento com alguém sentado ao meu lado. Orgulho? Será que essa palavra define exatamente o que sinto nesses momentos? Decidi usar essa perspectiva como inspiração para apresentar a entrevistada dessa edição, Prof. Sílvia Augusta Braga Reis. Assim, vamos rever o seu caminho... Após uma brilhante graduação em Odontologia na UFMG, ganhando o prêmio Prof. Hélio de Senna Figueiredo como melhor aluna da turma — graças à genética cedida por seu pai, nosso colega Dr. Benedito (Bené) e, ao mesmo tempo, pelo ambiente de sucesso profissional por ele criado —, Sílvia escolheu a Ortodontia como especialidade. Começou bem, com o Prof. Omar Gabriel, no curso de preventiva da PROFIS. Encantada, como todos que tiveram a oportunidade de partilhar da Ortodontia que esse professor vivia, decidiu que Bauru era o seu lugar, e nos deu a honra de escolher fazer especialização com nossa equipe. Belo Horizonte ficou pertinho. Muito jovem, mas sempre com espírito de aprender e fazer melhor, aceitou o desafio de tratar adultos e foi uma aluna destacada. Chegou em uma boa hora, quando estávamos elaborando o conceito de Padrão e, depois de terminar a especialização, em 1999, no mesmo ano iniciou o mestrado na Metodista (UMESP) e, depois, o doutorado na USP. Esse período foi um tempo produtivo, com pesquisas sobre análise facial subjetiva, base para o diagnóstico apoiado em morfologia (Padrão Facial), e a publicação de muitos artigos. Terminado o doutorado, em 2008, estava pronta para voos maiores. Ampliou sua prática docente, sempre ensinando a tratar adultos, coordenando o curso de Especialização de BH e se apresentando com frequência nos congressos mais importantes da especialidade. Neste movimento que valoriza as mulheres, “A visão delas na Ortodontia”, Sílvia é uma estrela. Tem luz própria, cumpre seu papel de clínica e professora com brilhantismo e segue um roteiro que leva ao sucesso verdadeiro. Voltando ao princípio desse texto, quando discutíamos se era adequado eu dizer “Foi minha aluna” e sentir orgulho, acho que posso concluir que: talvez seja melhor dizer “Foi nossa aluna”, e dividir o mérito de sua formação com todos que tiveram o privilégio de ensinar e aprender alguma coisa com ela. Acho que, dessa maneira, é justo sentir orgulho. Vamos à entrevista e, ao final, acredito que todos entenderão esse sentimento. Boa leitura!
- 15 March 2024
- Published by Dental Press International in Clinical Orthodontics
- Vol. 23 (1) , 10-33
Entrevista com Sílvia Reis
Foi minha aluna! Quantas vezes, ao assistir uma palestra de algum dos muitos professores que foram meus alunos, tenho esse pensamento ou comento com alguém sentado ao meu lado. Orgulho? Será que essa palavra define exatamente o que sinto nesses momentos? Decidi usar essa perspectiva como inspiração para apresentar a entrevistada dessa edição, Prof. Sílvia Augusta Braga Reis. Assim, vamos rever o seu caminho... Após uma brilhante graduação em Odontologia na UFMG, ganhando o prêmio Prof. Hélio de Senna Figueiredo como melhor aluna da turma — graças à genética cedida por seu pai, nosso colega Dr. Benedito (Bené) e, ao mesmo tempo, pelo ambiente de sucesso profissional por ele criado —, Sílvia escolheu a Ortodontia como especialidade. Começou bem, com o Prof. Omar Gabriel, no curso de preventiva da PROFIS. Encantada, como todos que tiveram a oportunidade de partilhar da Ortodontia que esse professor vivia, decidiu que Bauru era o seu lugar, e nos deu a honra de escolher fazer especialização com nossa equipe. Belo Horizonte ficou pertinho. Muito jovem, mas sempre com espírito de aprender e fazer melhor, aceitou o desafio de tratar adultos e foi uma aluna destacada. Chegou em uma boa hora, quando estávamos elaborando o conceito de Padrão e, depois de terminar a especialização, em 1999, no mesmo ano iniciou o mestrado na Metodista (UMESP) e, depois, o doutorado na USP. Esse período foi um tempo produtivo, com pesquisas sobre análise facial subjetiva, base para o diagnóstico apoiado em morfologia (Padrão Facial), e a publicação de muitos artigos. Terminado o doutorado, em 2008, estava pronta para voos maiores. Ampliou sua prática docente, sempre ensinando a tratar adultos, coordenando o curso de Especialização de BH e se apresentando com frequência nos congressos mais importantes da especialidade. Neste movimento que valoriza as mulheres, “A visão delas na Ortodontia”, Sílvia é uma estrela. Tem luz própria, cumpre seu papel de clínica e professora com brilhantismo e segue um roteiro que leva ao sucesso verdadeiro. Voltando ao princípio desse texto, quando discutíamos se era adequado eu dizer “Foi minha aluna” e sentir orgulho, acho que posso concluir que: talvez seja melhor dizer “Foi nossa aluna”, e dividir o mérito de sua formação com todos que tiveram o privilégio de ensinar e aprender alguma coisa com ela. Acho que, dessa maneira, é justo sentir orgulho. Vamos à entrevista e, ao final, acredito que todos entenderão esse sentimento. Boa leitura!
- 8 March 2024
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 27 (4) , 615-625
Temporomandibular joint disc position and shape in patients submitted to two protocols of rapid maxillary expansion and face mask therapy: A randomized clinical trial
Objective: The objective of this prospective study was to assess possible changes in the position and shape of the temporomandibular joint (TMJ) articular disc in patients treated with two protocols of rapid maxillary expansion (RME) and face mask (FM) therapy.Methods: A sample of 88 patients with Class III or Class III subdivision malocclusions, aged between 6 and 13 years, were consecutively selected and divided into three groups (G): G1‐34 patients were treated with RME, followed by FM therapy; G2‐34 patients were treated using RME according to modified alternate rapid maxillary expansion and constriction (ALT‐RAMEC) protocol, followed by FM therapy. These treated groups were randomly (1:1 allocation ratio) distributed according to the two treatment protocols. G3 – Control Group – 20 untreated patients were followed. Magnetic resonance imaging (MRI) TMJs were obtained before (T1) and after (T2) a treatment period or follow‐up. McNemar test, Fisher's exact test and intra‐ and inter‐observer concordance (K) were performed (p ≤ .05).Results: There were no statistically significant differences in the baseline cephalometric variables at T1 between the groups. There were statistically significant differences between the groups (p < .001) in relation to the disc shape in T1, since G1 (8 TMJs −11.76%) presented higher occurrences of altered forms in comparison with G2 (no changes). No significant differences were observed in disc position CM and OM (G1 – p > .999; G2 – p = .063; G3 – p = .500) and shape (G1 – p > 0.999; G2 – p = .250; G3 – not calculable), between T1 × T2, in any of the groups studied.Conclusion: The two treatment protocols did not have adverse effects on the position and shape of the TMJ disc, in a short‐term evaluation.
- 8 March 2024
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 27 (4) , 615-625
Temporomandibular joint disc position and shape in patients submitted to two protocols of rapid maxillary expansion and face mask therapy: A randomized clinical trial
Objective: The objective of this prospective study was to assess possible changes in the position and shape of the temporomandibular joint (TMJ) articular disc in patients treated with two protocols of rapid maxillary expansion (RME) and face mask (FM) therapy.Methods: A sample of 88 patients with Class III or Class III subdivision malocclusions, aged between 6 and 13 years, were consecutively selected and divided into three groups (G): G1‐34 patients were treated with RME, followed by FM therapy; G2‐34 patients were treated using RME according to modified alternate rapid maxillary expansion and constriction (ALT‐RAMEC) protocol, followed by FM therapy. These treated groups were randomly (1:1 allocation ratio) distributed according to the two treatment protocols. G3 – Control Group – 20 untreated patients were followed. Magnetic resonance imaging (MRI) TMJs were obtained before (T1) and after (T2) a treatment period or follow‐up. McNemar test, Fisher's exact test and intra‐ and inter‐observer concordance (K) were performed (p ≤ .05).Results: There were no statistically significant differences in the baseline cephalometric variables at T1 between the groups. There were statistically significant differences between the groups (p < .001) in relation to the disc shape in T1, since G1 (8 TMJs −11.76%) presented higher occurrences of altered forms in comparison with G2 (no changes). No significant differences were observed in disc position CM and OM (G1 – p > .999; G2 – p = .063; G3 – p = .500) and shape (G1 – p > 0.999; G2 – p = .250; G3 – not calculable), between T1 × T2, in any of the groups studied.Conclusion: The two treatment protocols did not have adverse effects on the position and shape of the TMJ disc, in a short‐term evaluation.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 29 (2) , e2423212
Accuracy of arch expansion with two thermoplastic materials in Invisalign® patients: EX30® and SmartTrack®
Objective: The purpose of this retrospective study was to compare accuracy of arch expansion using two different thermoplastic materials in Invisalign aligners: EX30® (Polyethylene Terephthalate Glycol, or PETG) and SmartTrack® (polyurethane). Methods: The study sample comprised 65 adult patients consecutively treated with Invisalign from two private practices: group 1 - treated with EX30® (358 teeth) and group 2 - treated with SmartTrack® (888 teeth). Six hundred and twenty-three measurements were assessed in three digital models throughout treatment: model 1 - initial, model 2 - predicted tooth position, and model 3 - achieved position. Sixteen reference points per arch were marked and, after best alignment, 2 points per tooth were copied from one digital model to another. Linear values of both arches were measured for canines, premolars, and first molars: on lingual gingival margins and cusp tips of every tooth. Comparisons were performed by Wilcoxon and Mann-Whitney test. Results: Both termoplastic materials presented significant differences between predicted and achieved values for all measurements, except for the lower molar cusp tip in the SmartTrack® group. There is no statistical difference in the accuracy of transverse expansion between these two materials. Overall accuracy for EX30® aligners in maxilla and mandible were found to be 37 and 38%, respectively; and Smarttrack® presented an overall accuracy of 56.62% in the maxilla and 68.72% in the mandible. Conclusions: It is not possible to affirm one material expands better than the other. Further controlled clinical studies should be conducted comparing SmartTrack® and EX30® under similar conditions.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 29 (2) , e2423212
Open AccessAccuracy of arch expansion with two thermoplastic materials in Invisalign® patients: EX30® and SmartTrack®
Objective: The purpose of this retrospective study was to compare accuracy of arch expansion using two different thermoplastic materials in Invisalign aligners: EX30® (Polyethylene Terephthalate Glycol, or PETG) and SmartTrack® (polyurethane). Methods: The study sample comprised 65 adult patients consecutively treated with Invisalign from two private practices: group 1 - treated with EX30® (358 teeth) and group 2 - treated with SmartTrack® (888 teeth). Six hundred and twenty-three measurements were assessed in three digital models throughout treatment: model 1 - initial, model 2 - predicted tooth position, and model 3 - achieved position. Sixteen reference points per arch were marked and, after best alignment, 2 points per tooth were copied from one digital model to another. Linear values of both arches were measured for canines, premolars, and first molars: on lingual gingival margins and cusp tips of every tooth. Comparisons were performed by Wilcoxon and Mann-Whitney test. Results: Both termoplastic materials presented significant differences between predicted and achieved values for all measurements, except for the lower molar cusp tip in the SmartTrack® group. There is no statistical difference in the accuracy of transverse expansion between these two materials. Overall accuracy for EX30® aligners in maxilla and mandible were found to be 37 and 38%, respectively; and Smarttrack® presented an overall accuracy of 56.62% in the maxilla and 68.72% in the mandible. Conclusions: It is not possible to affirm one material expands better than the other. Further controlled clinical studies should be conducted comparing SmartTrack® and EX30® under similar conditions.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 29 (2) , e2423237
Accuracy of Invisalign® aligners in adult patients: a retrospective study of angular tooth movements
Objective: This retrospective study aimed to assess the predictability of Invisalign® aligners regarding rotational, mesio-distal and buccal-lingual tip movements. Methods: Two materials were included in the analysis - EX30, used until 2013; and SmartTrack, in current use. The study comprised 56 adult patients treated with Invisalign Comprehensive. Data sample were assessed on three sets of digital models; model 1 - initial, model 2 - predicted, and model 3 - achieved. Sixty reference points were marked in each dental arch, and two reference planes assisted the superimposition. The degree of rotation, mesio-distal and buccal-lingual tip was obtained via trigonometric calculations, through a previously published validated method. The accuracy of outcomes was compared according to the types of tooth movement and teeth groups,and the influence of predetermined variables on movement accuracy was also investigated. Results: Rotation and mesio-distal tip did not present any significant difference when comparing EX30 and SmartTrack groups. Only buccal-lingual tip presented a significant difference, incisor and canine groups treated with EX30 aligners presented an increase in accuracy (p= 0.007 and p = 0.007, respectively). For each additional degree planned for rotation movements, there was an increase of 0.35° in the discrepancy, and an increase of 0.40° and 0.41° for mesio-distal and buccal-lingual tip, respectively. EX30 and SmartTrack discrepancies were compared by multilevel linear regression. Conclusion: EX30 aligners reached higher accuracy for buccal-lingual tip in anterior teeth. However, for rotation and mesio-distal tip, SmartTrack and EX30 are similarly accurate. The total amount of planned movement has a significant impact on accuracy rates, with a decrease in accuracy for every additional degree.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 29 (2) , e2423237
Open AccessAccuracy of Invisalign® aligners in adult patients: a retrospective study of angular tooth movements
Objective: This retrospective study aimed to assess the predictability of Invisalign® aligners regarding rotational, mesio-distal and buccal-lingual tip movements. Methods: Two materials were included in the analysis - EX30, used until 2013; and SmartTrack, in current use. The study comprised 56 adult patients treated with Invisalign Comprehensive. Data sample were assessed on three sets of digital models; model 1 - initial, model 2 - predicted, and model 3 - achieved. Sixty reference points were marked in each dental arch, and two reference planes assisted the superimposition. The degree of rotation, mesio-distal and buccal-lingual tip was obtained via trigonometric calculations, through a previously published validated method. The accuracy of outcomes was compared according to the types of tooth movement and teeth groups,and the influence of predetermined variables on movement accuracy was also investigated. Results: Rotation and mesio-distal tip did not present any significant difference when comparing EX30 and SmartTrack groups. Only buccal-lingual tip presented a significant difference, incisor and canine groups treated with EX30 aligners presented an increase in accuracy (p= 0.007 and p = 0.007, respectively). For each additional degree planned for rotation movements, there was an increase of 0.35° in the discrepancy, and an increase of 0.40° and 0.41° for mesio-distal and buccal-lingual tip, respectively. EX30 and SmartTrack discrepancies were compared by multilevel linear regression. Conclusion: EX30 aligners reached higher accuracy for buccal-lingual tip in anterior teeth. However, for rotation and mesio-distal tip, SmartTrack and EX30 are similarly accurate. The total amount of planned movement has a significant impact on accuracy rates, with a decrease in accuracy for every additional degree.
- 8 September 2022
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 26 (2) , 239-247
Intrusion of overerupted periodontally compromised posterior teeth using orthodontic mini implants: A mechanobiological finite element study
Introduction The intrusion of posterior teeth had been considered challenging up to the development of orthodontic mini implants. In periodontally compromised teeth, the challenge is even greater, because of the root resorption risk due to periodontal ligament over-compression. Still, the precise strategy to determine the force reduction level remains uncertain. Objective The objective of the study was to determine, by a finite element analysis (FEA), the force reduction needed to avoid root resorption and maintain the efficiency of orthodontic mechanics of periodontally compromised teeth similar to the sound one. Methods An anatomical model was constructed representing a premolar inserted into a maxillary bone. Based on the initial model (R0), three bone height loss conditions were simulated (R2 = 2 mm, R4 = 4 mm, and R6 = 6 mm). Two intrusive movements were simulated: pure intrusion (bilateral mini implant) and uncontrolled-tipping intrusion (buccal mini implant). The hydrostatic stress at the periodontal ligament was used to evaluate the risk of root resorption due to over-compression. Results For bilateral mini implant intrusion, the force had to be decreased by 16%, 32% and 48% for R2, R4 and R6, respectively. For buccal mini implant intrusion, the required reductions were higher (20%, 36% and 56%). A linear relationship between the intrusive force reduction and the alveolar bone height loss was observed in both intrusion mechanics. Conclusions According to the FE results, 8% or 9.3% of force reduction for each millimetre of bone height loss is suggested for intrusion with bilateral or buccal mini implant, respectively. The buccal mini implant anchorage must be associated with a supplemental strategy to avoid buccal crown tipping.
- 8 September 2022
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 26 (2) , 239-247
Intrusion of overerupted periodontally compromised posterior teeth using orthodontic mini implants: A mechanobiological finite element study
Introduction The intrusion of posterior teeth had been considered challenging up to the development of orthodontic mini implants. In periodontally compromised teeth, the challenge is even greater, because of the root resorption risk due to periodontal ligament over-compression. Still, the precise strategy to determine the force reduction level remains uncertain. Objective The objective of the study was to determine, by a finite element analysis (FEA), the force reduction needed to avoid root resorption and maintain the efficiency of orthodontic mechanics of periodontally compromised teeth similar to the sound one. Methods An anatomical model was constructed representing a premolar inserted into a maxillary bone. Based on the initial model (R0), three bone height loss conditions were simulated (R2 = 2 mm, R4 = 4 mm, and R6 = 6 mm). Two intrusive movements were simulated: pure intrusion (bilateral mini implant) and uncontrolled-tipping intrusion (buccal mini implant). The hydrostatic stress at the periodontal ligament was used to evaluate the risk of root resorption due to over-compression. Results For bilateral mini implant intrusion, the force had to be decreased by 16%, 32% and 48% for R2, R4 and R6, respectively. For buccal mini implant intrusion, the required reductions were higher (20%, 36% and 56%). A linear relationship between the intrusive force reduction and the alveolar bone height loss was observed in both intrusion mechanics. Conclusions According to the FE results, 8% or 9.3% of force reduction for each millimetre of bone height loss is suggested for intrusion with bilateral or buccal mini implant, respectively. The buccal mini implant anchorage must be associated with a supplemental strategy to avoid buccal crown tipping.
- 10 August 2022
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 26 (2) , 185-196
Temporomandibular joint articular disc position and shape in skeletal Class III
Objective: To compare the position and shape of the temporomandibular joint (TMJ) articular disc among the sagittal and vertical skeletal patterns in Angle Class III, Class III subdivision malocclusion and normal occlusion. The null hypothesis was that there was no difference in disc position and shape in different (1) malocclusions and (2) skeletal patterns.Methods: This cross‐sectional observational study evaluated 105 patients divided into 3 groups: Class III (33, 9.39 ± 1.96 years), Class III subdivision (45, 9.51 ± 1.59 years) and a normal occlusion (27, 10.24 ± 0.87 years) was included as healthy control. Severity of the maxilla‐mandibular anteroposterior discrepancy and vertical facial pattern were determined using 2D cephalometry, and the position and shape of the articular discs were evaluated in magnetic resonance images. Statistical parametric and non‐parametric tests and Kappa analysis for intra‐observer and inter‐observer assessment were used (p ≤ .05).Results: Significant between‐group differences were found in articular disc position. In the normal occlusion group, all the articular discs were well positioned. In Class III and Class III subdivision, the discs were displaced in 30.3% and 12.2% of the TMJs, respectively. Sagittal and vertical skeletal patterns did not affect the findings significantly. The Class III subdivision malocclusion group is probably different from the other groups, showing 97.7% of biconcave discs in both TMJs.Conclusion: The longitudinal follow‐up of this sample becomes relevant as the two groups with malocclusion in the pre‐peak phase of pubertal growth showed differences in the prevalence of displacement and form of the articular disc, with no association with their vertical facial characteristics.
- 10 August 2022
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 26 (2) , 185-196
Temporomandibular joint articular disc position and shape in skeletal Class III
Objective: To compare the position and shape of the temporomandibular joint (TMJ) articular disc among the sagittal and vertical skeletal patterns in Angle Class III, Class III subdivision malocclusion and normal occlusion. The null hypothesis was that there was no difference in disc position and shape in different (1) malocclusions and (2) skeletal patterns.Methods: This cross‐sectional observational study evaluated 105 patients divided into 3 groups: Class III (33, 9.39 ± 1.96 years), Class III subdivision (45, 9.51 ± 1.59 years) and a normal occlusion (27, 10.24 ± 0.87 years) was included as healthy control. Severity of the maxilla‐mandibular anteroposterior discrepancy and vertical facial pattern were determined using 2D cephalometry, and the position and shape of the articular discs were evaluated in magnetic resonance images. Statistical parametric and non‐parametric tests and Kappa analysis for intra‐observer and inter‐observer assessment were used (p ≤ .05).Results: Significant between‐group differences were found in articular disc position. In the normal occlusion group, all the articular discs were well positioned. In Class III and Class III subdivision, the discs were displaced in 30.3% and 12.2% of the TMJs, respectively. Sagittal and vertical skeletal patterns did not affect the findings significantly. The Class III subdivision malocclusion group is probably different from the other groups, showing 97.7% of biconcave discs in both TMJs.Conclusion: The longitudinal follow‐up of this sample becomes relevant as the two groups with malocclusion in the pre‐peak phase of pubertal growth showed differences in the prevalence of displacement and form of the articular disc, with no association with their vertical facial characteristics.
- Open Access
- 13 May 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (7)
Long-term evaluation of soft tissue profile changes induced by Herbst appliance followed by fixed appliances
The present investigation aimed to evaluate, by cephalometric analysis, the soft tissue profile changes in adolescents with Class II Division 1 malocclusion, treated with Herbst appliance (Stage I) and fixed appliances (Stage II), followed-up for an average of 4 years (Stage III). The adolescents were divided into two groups: treated group (TG) - 33 adolescents with Class II malocclusions (17 boys and 16 girls) consecutively treated with Herbst appliance and fixed appliances; control group (CG) - 28 adolescents (13 boys and 15 girls) with untreated Class II malocclusions. Lateral cephalograms were obtained immediately before (T1) and after (T2) Herbst treatment, after fixed appliances (T3), and on average, 4 years after orthodontic treatment. Intergroup comparison was evaluated by t or Mann-Whitney tests. The TG was evaluated by analysis of variance followed by Tukey test or Friedman test followed by Dunn’s test. Compared to the CG, the TG showed significant favorable changes at Stage I: decrease in facial convexity, upper lip retrusion, lower lip protrusion, improvement of soft tissue pogonion and increase in mentolabial angle. The total posttreatment period (T2-T4) of the TG showed: increase in H line-Prn, and upper and lower lips retrusion, while the others variables remained stable. This study suggests that Herbst therapy improved features of soft tissue facial profile, which were maintained after fixed appliances and for an average of 4 years posttreatment, although the convex facial characteristic has prevailed.
- 13 May 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (7)
Open AccessLong-term evaluation of soft tissue profile changes induced by Herbst appliance followed by fixed appliances
The present investigation aimed to evaluate, by cephalometric analysis, the soft tissue profile changes in adolescents with Class II Division 1 malocclusion, treated with Herbst appliance (Stage I) and fixed appliances (Stage II), followed-up for an average of 4 years (Stage III). The adolescents were divided into two groups: treated group (TG) - 33 adolescents with Class II malocclusions (17 boys and 16 girls) consecutively treated with Herbst appliance and fixed appliances; control group (CG) - 28 adolescents (13 boys and 15 girls) with untreated Class II malocclusions. Lateral cephalograms were obtained immediately before (T1) and after (T2) Herbst treatment, after fixed appliances (T3), and on average, 4 years after orthodontic treatment. Intergroup comparison was evaluated by t or Mann-Whitney tests. The TG was evaluated by analysis of variance followed by Tukey test or Friedman test followed by Dunn’s test. Compared to the CG, the TG showed significant favorable changes at Stage I: decrease in facial convexity, upper lip retrusion, lower lip protrusion, improvement of soft tissue pogonion and increase in mentolabial angle. The total posttreatment period (T2-T4) of the TG showed: increase in H line-Prn, and upper and lower lips retrusion, while the others variables remained stable. This study suggests that Herbst therapy improved features of soft tissue facial profile, which were maintained after fixed appliances and for an average of 4 years posttreatment, although the convex facial characteristic has prevailed.
- 9 April 2022
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 26 (1) , 27-36
Evaluation of the stability of treatment with Herbst appliance associated with Hyrax expander and fixed orthodontics through counterpart analysis: A longitudinal follow‐up study
Objective The aim of this study was to evaluate the stability of treatment with a Herbst appliance associated with Hyrax expander (Stage I), followed by fixed appliances (Stage II) and follow-up for an average of 4 years after Stage II, on dentoskeletal facial structures. Methods This study involved 50 adolescents with Angle Class II division 1 malocclusion associated with mandibular retrognathism: Treated Group (TG-25) and Control Group (CG-25). Lateral cephalometric radiographs were taken: T1, immediately before Stage I (TG) or at the beginning of the follow-up period (CG); T2, at the end of Stage I (TG) or the follow-up period (CG); T3, at the end of Stage II (TG); and T4, on average, 4 years after Stage II (TG). Enlow's counterpart analysis and some cephalometric measurements were evaluated. Parametric and non-parametric tests were used (P <= 0.05). Results The ramus alignment variables (P < 0.001), SNB (0.040), ANB ( T2 < T3 = T4; SNB, P = 0.016, T1 < T2 = T3 = T4; ANB, P < 0.001, T1 > T2 = T3 = T4; 1.MP, P < 0.001, T1 < T2 = T3 = T4; ms/RLp, P = 0.002, T1 = T2 < T3 = T4; mi/RLp, P < 0.001, T1 < T2 = T3 = T4; S-LS, P < 0.001, T1 > T2 = T3 = T4 and S-LI, P = 0.003, T1 = T2 = T3 > T4. Conclusion The nasomaxillary complex (MCF/PM alignment) tended to a retrusive effect to compensate the degree of mandibular retrusion. The protrusive effect of the lower facial third was evident after the Herbst stage and did not remain stable in the follow-up. The dentoalveolar compensation and improvement in facial profile remained stable.
- 9 April 2022
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 26 (1) , 27-36
Evaluation of the stability of treatment with Herbst appliance associated with Hyrax expander and fixed orthodontics through counterpart analysis: A longitudinal follow‐up study
Objective The aim of this study was to evaluate the stability of treatment with a Herbst appliance associated with Hyrax expander (Stage I), followed by fixed appliances (Stage II) and follow-up for an average of 4 years after Stage II, on dentoskeletal facial structures. Methods This study involved 50 adolescents with Angle Class II division 1 malocclusion associated with mandibular retrognathism: Treated Group (TG-25) and Control Group (CG-25). Lateral cephalometric radiographs were taken: T1, immediately before Stage I (TG) or at the beginning of the follow-up period (CG); T2, at the end of Stage I (TG) or the follow-up period (CG); T3, at the end of Stage II (TG); and T4, on average, 4 years after Stage II (TG). Enlow's counterpart analysis and some cephalometric measurements were evaluated. Parametric and non-parametric tests were used (P <= 0.05). Results The ramus alignment variables (P < 0.001), SNB (0.040), ANB ( T2 < T3 = T4; SNB, P = 0.016, T1 < T2 = T3 = T4; ANB, P < 0.001, T1 > T2 = T3 = T4; 1.MP, P < 0.001, T1 < T2 = T3 = T4; ms/RLp, P = 0.002, T1 = T2 < T3 = T4; mi/RLp, P < 0.001, T1 < T2 = T3 = T4; S-LS, P < 0.001, T1 > T2 = T3 = T4 and S-LI, P = 0.003, T1 = T2 = T3 > T4. Conclusion The nasomaxillary complex (MCF/PM alignment) tended to a retrusive effect to compensate the degree of mandibular retrusion. The protrusive effect of the lower facial third was evident after the Herbst stage and did not remain stable in the follow-up. The dentoalveolar compensation and improvement in facial profile remained stable.
- 19 July 2021
- Published by Dental Press International in Revista Clínica de Ortodontia Dental Press
- Vol. 20 (3) , 8-23
Entrevista com Lorenzo Franchi
- 19 July 2021
- Published by Dental Press International in Revista Clínica de Ortodontia Dental Press
- Vol. 20 (3) , 8-23
Entrevista com Lorenzo Franchi
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 26 (3) , e2119148
Validity and reliability of a trigonometry-based method for the measurement of tooth movement on digital models
Objective: The objectives of the present study were to develop a method for longitudinally measuring tooth rotation, inclination and angulation on digital models, and to test the method validity and reliability. Methods: The initial and final planned models of 14 patients treated with Invisalign® (386 teeth) were exported from ClinCheck®. The rotation, inclination and angulation values were assessed for the incisors, canines, premolars and molars, in both models, using trigonometry. An application was developed in Python 2.7 to automate the measurements. The ∆planned (variation in the position between the initial and final planned models) was obtained for each tooth and each type of movement. To test the validity, the degree of agreement between the ∆planned and the values available in the Invisalign® Table of Movements was assessed using the Intraclass Correlation Coefficient (ICC) and Bland-Altman analysis. For intra and inter-rater reliabilities, the ∆planned was obtained again. Results: Excellent ICCs (> 0.9) and limits of agreement with narrow and clinically acceptable discrepancies were obtained for the rotation of all teeth (except maxillary canines, which had broader limits: -3.47 - 5.43) and for the inclination of premolars and molars. The inclination of anterior teeth and angulation of all teeth had ICCs and limits that were not indicative of great agreement. The reliability was high for the three movements (discrepancy <2°). Conclusions: The method developed is reliable and suitable for longitudinally measuring inclination (posterior teeth) and rotation (except maxillary canines). It has limited value for the other movements measurements.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 26 (3) , e2119148
Open AccessValidity and reliability of a trigonometry-based method for the measurement of tooth movement on digital models
Objective: The objectives of the present study were to develop a method for longitudinally measuring tooth rotation, inclination and angulation on digital models, and to test the method validity and reliability. Methods: The initial and final planned models of 14 patients treated with Invisalign® (386 teeth) were exported from ClinCheck®. The rotation, inclination and angulation values were assessed for the incisors, canines, premolars and molars, in both models, using trigonometry. An application was developed in Python 2.7 to automate the measurements. The ∆planned (variation in the position between the initial and final planned models) was obtained for each tooth and each type of movement. To test the validity, the degree of agreement between the ∆planned and the values available in the Invisalign® Table of Movements was assessed using the Intraclass Correlation Coefficient (ICC) and Bland-Altman analysis. For intra and inter-rater reliabilities, the ∆planned was obtained again. Results: Excellent ICCs (> 0.9) and limits of agreement with narrow and clinically acceptable discrepancies were obtained for the rotation of all teeth (except maxillary canines, which had broader limits: -3.47 - 5.43) and for the inclination of premolars and molars. The inclination of anterior teeth and angulation of all teeth had ICCs and limits that were not indicative of great agreement. The reliability was high for the three movements (discrepancy <2°). Conclusions: The method developed is reliable and suitable for longitudinally measuring inclination (posterior teeth) and rotation (except maxillary canines). It has limited value for the other movements measurements.