James Kear
James Kear has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Andrew P. Bunger
Department of Civil and Environmental Engineering University of Pittsburgh Pittsburgh PA USA
8 shared publications Andrew P.
2 shared publicationsBisheng Wu
2 shared publications- Brice Lecampion
Geo‐Energy Lab—Gaznat Chair on Geo‐Energy Swiss Federal Institute of Technology in Lausanne EPFL‐ENAC‐IIC‐GEL Lausanne Switzerland
2 shared publications - Claudio Delle Piane
CSIRO Energy
2 shared publications Dane Kasperczyk
2 shared publications
Latest Publications
- 13 May 2022
- Published by CSIRO Publishing in The APPEA Journal
- Vol. 62 (1) , 310-318
Uncertainty analysis on environmental impacts of hydraulic fracturing
Uncertainty is an undeniable aspect of underground operations, such as wellbore stimulation treatments, where combined rock and fluid interaction add a layer of complexity to the uncertainty. There are social and environmental concerns about the probable outcome of operations like hydraulic fracturing. Hydraulic fracturing treatments may affect the integrity of sub-surface geological strata or might initiate unexpected potential risks to the environment when the created fracture extends beyond its engineered design. Therefore, it is necessary to investigate a range of possible scenarios by which the fracture may experience a deviation from its planned behaviour. In this study, we model the uncertainty associated with hydraulic fracturing using fracture growth simulation. The uncertainty of a range of treatment parameters, such as pumping flow rate, injection duration and mechanical properties of the underground geological layer, is investigated. Monte Carlo simulation is used to examine different probable fracturing scenarios and numerous fracturing simulations with numerical and analytical models. The probability analysis is performed in a case study to identify the cumulative distribution functions (CDFs) of fracture growth. The emerging least, median and most likely situations of fracture growth are analysed to evaluate the fracturing uncertainty. Our results indicate that the numerical modelling approach may predict a more extensive fracture growth in the vertical plane. The numerical model may suggest a more conservative way to address environmental concerns. The resulting cumulative distribution of probabilities suggests the CDFs of the analytical model as the lower band for fracture length, whereas the numerical CDFs presents the upper band.
- 13 May 2022
- Published by CSIRO Publishing in The APPEA Journal
- Vol. 62 (1) , 310-318
Uncertainty analysis on environmental impacts of hydraulic fracturing
Uncertainty is an undeniable aspect of underground operations, such as wellbore stimulation treatments, where combined rock and fluid interaction add a layer of complexity to the uncertainty. There are social and environmental concerns about the probable outcome of operations like hydraulic fracturing. Hydraulic fracturing treatments may affect the integrity of sub-surface geological strata or might initiate unexpected potential risks to the environment when the created fracture extends beyond its engineered design. Therefore, it is necessary to investigate a range of possible scenarios by which the fracture may experience a deviation from its planned behaviour. In this study, we model the uncertainty associated with hydraulic fracturing using fracture growth simulation. The uncertainty of a range of treatment parameters, such as pumping flow rate, injection duration and mechanical properties of the underground geological layer, is investigated. Monte Carlo simulation is used to examine different probable fracturing scenarios and numerous fracturing simulations with numerical and analytical models. The probability analysis is performed in a case study to identify the cumulative distribution functions (CDFs) of fracture growth. The emerging least, median and most likely situations of fracture growth are analysed to evaluate the fracturing uncertainty. Our results indicate that the numerical modelling approach may predict a more extensive fracture growth in the vertical plane. The numerical model may suggest a more conservative way to address environmental concerns. The resulting cumulative distribution of probabilities suggests the CDFs of the analytical model as the lower band for fracture length, whereas the numerical CDFs presents the upper band.
- Open Access
- 1 July 2018
- Published by Elsevier in International Journal of Coal Geology
- Vol. 195, 280-303
Review of plausible chemical migration pathways in Australian coal seam gas basins
- 1 July 2018
- Published by Elsevier in International Journal of Coal Geology
- Vol. 195, 280-303
Open AccessReview of plausible chemical migration pathways in Australian coal seam gas basins
- 28 May 2018
- Published by CSIRO Publishing in The APPEA Journal
- Vol. 58 (1) , 94-101
Perspectives on successful coal seam gas well decommissioning
Decommissioning of wells and well pads (plugging and abandonment of the well and rehabilitation of the well pad) is an important activity in coal seam gas developments due to the large number of wells drilled and their co-location with other land uses. Successful decommissioning will need to be conducted in a way that is effective, efficient, complies with regulatory requirements and is socially acceptable. This study sought to understand the perspective of industry, government and local stakeholders on the decommissioning process and asked the question ‘what does successful decommissioning mean’? The study was conducted through workshops held in Camden, Chinchilla and Narrabri involving industry, government and local residents. All stakeholders agreed that the goal of successful decommissioning is to effectively have no legacy issues arising from the abandoned well or well pad, in perpetuity. However, there were differences in the confidence that stakeholders had in the process of achieving this outcome, largely based on the varying levels of understanding of well abandonment. This lack of confidence and understanding contributes to cross-cutting themes that emerged from the workshops. Local stakeholders expressed a strong desire for independent oversight and assessment of well abandonment processes, with increased transparency and access to information on abandoned wells in an understandable form. They also stated that long-term monitoring of wells post abandonment would assist in providing them with confidence that wells can be successfully decommissioned.
- 28 May 2018
- Published by CSIRO Publishing in The APPEA Journal
- Vol. 58 (1) , 94-101
Perspectives on successful coal seam gas well decommissioning
Decommissioning of wells and well pads (plugging and abandonment of the well and rehabilitation of the well pad) is an important activity in coal seam gas developments due to the large number of wells drilled and their co-location with other land uses. Successful decommissioning will need to be conducted in a way that is effective, efficient, complies with regulatory requirements and is socially acceptable. This study sought to understand the perspective of industry, government and local stakeholders on the decommissioning process and asked the question ‘what does successful decommissioning mean’? The study was conducted through workshops held in Camden, Chinchilla and Narrabri involving industry, government and local residents. All stakeholders agreed that the goal of successful decommissioning is to effectively have no legacy issues arising from the abandoned well or well pad, in perpetuity. However, there were differences in the confidence that stakeholders had in the process of achieving this outcome, largely based on the varying levels of understanding of well abandonment. This lack of confidence and understanding contributes to cross-cutting themes that emerged from the workshops. Local stakeholders expressed a strong desire for independent oversight and assessment of well abandonment processes, with increased transparency and access to information on abandoned wells in an understandable form. They also stated that long-term monitoring of wells post abandonment would assist in providing them with confidence that wells can be successfully decommissioned.
- 1 August 2016
- Published by Taylor & Francis in CIM Journal
- Vol. 7 (3) , 165-177
Investigation of hydraulic fracture growth through weak discontinuities with active ultrasound monitoring
- 1 August 2016
- Published by Taylor & Francis in CIM Journal
- Vol. 7 (3) , 165-177
Investigation of hydraulic fracture growth through weak discontinuities with active ultrasound monitoring
- 15 July 2016
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 22 (01) , 219-234
Finite-Element Simulation of a Hydraulic Fracture Interacting With a Natural Fracture
Summary: In this paper, the problem of a hydraulic fracture (HF) interacting with a pre-existing natural fracture (NF) has been investigated with a cohesive zone finite-element model. The model fully couples fluid flow, fracture propagation, and elastic deformation, taking into account the friction between the contacting fracture surfaces and the interaction between the HF and the NF. The effect of the field conditions—such as in-situ stresses, rock and fracture mechanical and geometrical (initial conductivity of the NF) properties, intersection angle, and the treatment parameters (fracturing fluid viscosity and injection rate)—on the HF propagation behavior has been analyzed. The finite-element-modeling results provide detailed quantitative information on the development of various types of HF/NF interaction, interfacial stress distribution, fracture-geometry evolution, and injection-pressure history, and allow us to gain an in-depth understanding of the relative roles of various parameters. The value of a parameter calculated as the product of fracturing-fluid viscosity and injection rate can be used as an indicator to gauge if crossing or diverting behavior is more likely. In addition, using a finite-element approach allows the analysis to be extended to include the effects of fluid leakoff and poroelastic effect, and allows the study of HF height growth through a system of nonhomogeneous layers and their bedding planes.
- 15 July 2016
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 22 (01) , 219-234
Finite-Element Simulation of a Hydraulic Fracture Interacting With a Natural Fracture
Summary: In this paper, the problem of a hydraulic fracture (HF) interacting with a pre-existing natural fracture (NF) has been investigated with a cohesive zone finite-element model. The model fully couples fluid flow, fracture propagation, and elastic deformation, taking into account the friction between the contacting fracture surfaces and the interaction between the HF and the NF. The effect of the field conditions—such as in-situ stresses, rock and fracture mechanical and geometrical (initial conductivity of the NF) properties, intersection angle, and the treatment parameters (fracturing fluid viscosity and injection rate)—on the HF propagation behavior has been analyzed. The finite-element-modeling results provide detailed quantitative information on the development of various types of HF/NF interaction, interfacial stress distribution, fracture-geometry evolution, and injection-pressure history, and allow us to gain an in-depth understanding of the relative roles of various parameters. The value of a parameter calculated as the product of fracturing-fluid viscosity and injection rate can be used as an indicator to gauge if crossing or diverting behavior is more likely. In addition, using a finite-element approach allows the analysis to be extended to include the effects of fluid leakoff and poroelastic effect, and allows the study of HF height growth through a system of nonhomogeneous layers and their bedding planes.
- 29 April 2015
- Published by Springer Nature in International Journal of Fracture
- Vol. 193 (1) , 87-98
Sustained acoustic emissions following tensile crack propagation in a crystalline rock
- 29 April 2015
- Published by Springer Nature in International Journal of Fracture
- Vol. 193 (1) , 87-98
Sustained acoustic emissions following tensile crack propagation in a crystalline rock
- 1 September 2014
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 70, 368-374
Comparison between ultrasonic and photometric methods for hydraulic fracture laboratory monitoring
- 1 September 2014
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 70, 368-374
Comparison between ultrasonic and photometric methods for hydraulic fracture laboratory monitoring
- Open Access
- 1 June 2014
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 118, 40-51
Experimental chemoporoelastic characterization of shale using millimeter-scale specimens
- 1 June 2014
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 118, 40-51
Open AccessExperimental chemoporoelastic characterization of shale using millimeter-scale specimens