Cemile Özcan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cemile Özcan has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Aykut Or
Çanakkale Onsekiz Mart Üniversitesi
5 shared publications - Derya Okuyan
Balikesir University, Susurluk Agriculture and Forestry Vocational School, Balıkesir, Turkey
5 shared publications Ferit Gürbüz
5 shared publications- Gökay Karabacak
Kırklareli University
5 shared publications - Yıldız Uygun Cebeci
Department of Chemistry, Kırklareli University, Kırklareli, Turkey
5 shared publications - Ülkü Yılmaz
Malatya Turgut Ozal Universitesi
5 shared publications
Latest Publications
- 26 June 2026
- Published by Toprak Bilimi ve Bitki Besleme Dergisi in Toprak Bilimi ve Bitki Besleme Dergisi
- Vol. 14 (1) , 46-57
Trakya Bölgesi çeltik topraklarında makro ve mikro besin elementlerinin belirlenmesinde H3A-4 çoklu ekstraksiyon yönteminin uygulanabilirliğinin değerlendirilmesi
Bu çalışma, Trakya Bölgesi'ndeki çeltik topraklarında makro ve mikro besin elementlerinin belirlenmesinde H3A-4 çoklu ekstraksiyon yönteminin uygulanabilirliğini değerlendirmek ve bu yöntemin geleneksel toprak ekstraksiyon yöntemleriyle olan ilişkisini incelemek amacıyla yürütülmüştür. Edirne, Kırklareli ve İstanbul illerindeki çeltik yetiştirme alanlarından toplanan toprak örnekleri; toprak pH’ı, elektriksel iletkenlik (EC), doku özellikleri ve bitkiler tarafından alınabilir besin elementi içerikleri açısından analiz edilmiştir. Araştırmada makro besin elementleri olarak fosfor (P), potasyum (K), kalsiyum (Ca) ve magnezyum (Mg); mikro besin elementleri olarak ise demir (Fe), manganez (Mn), bakır (Cu), çinko (Zn) ve bor (B) değerlendirilmiştir. Geleneksel ekstraksiyon yöntemleri arasında alınabilir P için Olsen, değişebilir K, Ca ve Mg için amonyum asetat (NH4OAc), alınabilir Fe, Mn, Cu ve Zn için DTPA ve alınabilir B için sıcak su ekstraksiyonu kullanılmıştır. Bu yöntemlerden elde edilen sonuçlar, H3A-4 ekstraksiyonu sonrasında ICP-OES ile belirlenen değerlerle karşılaştırılmıştır. İncelenen topraklar genel olarak nötr ile hafif alkali reaksiyon göstermiş, 0.18–2.74 dS m⁻1 arasında değişen EC değerleri ağırlıklı olarak tuzsuz ile hafif tuzlu koşullara işaret etmiştir. Ayrıca, toprakların büyük çoğunluğu ağır bünyeli özellikler göstermiştir. Korelasyon analizleri, H3A-4 ekstraksiyon yönteminin K ve Mg için geleneksel yöntemlerle çok güçlü, Ca ve B için güçlü ve anlamlı pozitif ilişkiler gösterdiğini ortaya koymuştur. Fe ve Mn için orta düzeyde, P için ise zayıf ancak istatistiksel olarak anlamlı pozitif ilişkiler belirlenmiştir. Buna karşılık, Zn ve Cu için yöntemler arasında istatistiksel olarak anlamlı bir ilişki saptanmamıştır. Bu sonuçlar, H3A-4 çoklu ekstraksiyon yönteminin Trakya Bölgesi çeltik topraklarında bitkiler tarafından alınabilir besin elementlerinin eşzamanlı belirlenmesi için pratik bir alternatif olabileceğini göstermektedir. Bununla birlikte, yöntemin tarımsal yorumlama ve gübreleme önerilerinde kullanılabilmesi için bitki besin elementi alımı ve ürün verimi ile desteklenen kalibrasyon çalışmalarına ihtiyaç bulunmaktadır.
- 26 June 2026
- Published by Toprak Bilimi ve Bitki Besleme Dergisi in Toprak Bilimi ve Bitki Besleme Dergisi
- Vol. 14 (1) , 46-57
Trakya Bölgesi çeltik topraklarında makro ve mikro besin elementlerinin belirlenmesinde H3A-4 çoklu ekstraksiyon yönteminin uygulanabilirliğinin değerlendirilmesi
Bu çalışma, Trakya Bölgesi'ndeki çeltik topraklarında makro ve mikro besin elementlerinin belirlenmesinde H3A-4 çoklu ekstraksiyon yönteminin uygulanabilirliğini değerlendirmek ve bu yöntemin geleneksel toprak ekstraksiyon yöntemleriyle olan ilişkisini incelemek amacıyla yürütülmüştür. Edirne, Kırklareli ve İstanbul illerindeki çeltik yetiştirme alanlarından toplanan toprak örnekleri; toprak pH’ı, elektriksel iletkenlik (EC), doku özellikleri ve bitkiler tarafından alınabilir besin elementi içerikleri açısından analiz edilmiştir. Araştırmada makro besin elementleri olarak fosfor (P), potasyum (K), kalsiyum (Ca) ve magnezyum (Mg); mikro besin elementleri olarak ise demir (Fe), manganez (Mn), bakır (Cu), çinko (Zn) ve bor (B) değerlendirilmiştir. Geleneksel ekstraksiyon yöntemleri arasında alınabilir P için Olsen, değişebilir K, Ca ve Mg için amonyum asetat (NH4OAc), alınabilir Fe, Mn, Cu ve Zn için DTPA ve alınabilir B için sıcak su ekstraksiyonu kullanılmıştır. Bu yöntemlerden elde edilen sonuçlar, H3A-4 ekstraksiyonu sonrasında ICP-OES ile belirlenen değerlerle karşılaştırılmıştır. İncelenen topraklar genel olarak nötr ile hafif alkali reaksiyon göstermiş, 0.18–2.74 dS m⁻1 arasında değişen EC değerleri ağırlıklı olarak tuzsuz ile hafif tuzlu koşullara işaret etmiştir. Ayrıca, toprakların büyük çoğunluğu ağır bünyeli özellikler göstermiştir. Korelasyon analizleri, H3A-4 ekstraksiyon yönteminin K ve Mg için geleneksel yöntemlerle çok güçlü, Ca ve B için güçlü ve anlamlı pozitif ilişkiler gösterdiğini ortaya koymuştur. Fe ve Mn için orta düzeyde, P için ise zayıf ancak istatistiksel olarak anlamlı pozitif ilişkiler belirlenmiştir. Buna karşılık, Zn ve Cu için yöntemler arasında istatistiksel olarak anlamlı bir ilişki saptanmamıştır. Bu sonuçlar, H3A-4 çoklu ekstraksiyon yönteminin Trakya Bölgesi çeltik topraklarında bitkiler tarafından alınabilir besin elementlerinin eşzamanlı belirlenmesi için pratik bir alternatif olabileceğini göstermektedir. Bununla birlikte, yöntemin tarımsal yorumlama ve gübreleme önerilerinde kullanılabilmesi için bitki besin elementi alımı ve ürün verimi ile desteklenen kalibrasyon çalışmalarına ihtiyaç bulunmaktadır.
- Open Access
- 29 December 2025
- Published by Özgür Yayınları
- p. 43-60
Çeşitli Adsorbanlar Kullanılarak Lineer Alkilbenzen Sülfonatın Analitik Doğrulaması ve LABS Atıklarından Geri Kazanımın Değerlendirilmesi
Endüstriyel ilerlemeler ve artan nüfus yoğunluğuyla birlikte ortaya çıkan ihtiyaçlar ve temizlik ürünlerinde yaygın olarak tercih edilen anyonik yüzey aktif olan Lineer alkil benzen sülfonatın (LABS) doğru ve güvenilir metotlarla geri kazanımı ve tayini oldukça önem taşımaktadır. Bu sebeple çalışma kapsamında LABS bileşeninin adsorbanlar (silikajel, aktif karbon, reçine ve XAD-7) ile geri kazanımı araştırılmıştır. Aktif karbonun LABS geri kazanımında en iyi performansı gösterdiği tespit edildi ve çalışmalar aktif karbon üzerinde gerçekleştirildi. Optimum koşulları belirlemek için pH, adsorban miktarı ve süre gibi kritik adsorpsiyon parametrelerinin etkileri değerlendirilmiştir. LABS geri kazanım ölçümleri, aktif karbon, UV ve HPLC yöntemleri kullanılarak optimum koşullar altında gerçekleştirildi ve sırasıyla %95–97 geri kazanım oranları elde edildi. Bu çalışma, LABS geri kazanımı için aktif karbonun adsorpsiyon sürecini kontrol eden faktörler hakkında önemli yeni bilgiler sunmaktadır. Bu bilgiler, uygulanabilir ve verimli adsorpsiyon tabanlı atık su arıtma tekniklerinin geliştirilmesinde faydalı olacaktır.
- 29 December 2025
- Published by Özgür Yayınları
- p. 43-60
Open AccessÇeşitli Adsorbanlar Kullanılarak Lineer Alkilbenzen Sülfonatın Analitik Doğrulaması ve LABS Atıklarından Geri Kazanımın Değerlendirilmesi
Endüstriyel ilerlemeler ve artan nüfus yoğunluğuyla birlikte ortaya çıkan ihtiyaçlar ve temizlik ürünlerinde yaygın olarak tercih edilen anyonik yüzey aktif olan Lineer alkil benzen sülfonatın (LABS) doğru ve güvenilir metotlarla geri kazanımı ve tayini oldukça önem taşımaktadır. Bu sebeple çalışma kapsamında LABS bileşeninin adsorbanlar (silikajel, aktif karbon, reçine ve XAD-7) ile geri kazanımı araştırılmıştır. Aktif karbonun LABS geri kazanımında en iyi performansı gösterdiği tespit edildi ve çalışmalar aktif karbon üzerinde gerçekleştirildi. Optimum koşulları belirlemek için pH, adsorban miktarı ve süre gibi kritik adsorpsiyon parametrelerinin etkileri değerlendirilmiştir. LABS geri kazanım ölçümleri, aktif karbon, UV ve HPLC yöntemleri kullanılarak optimum koşullar altında gerçekleştirildi ve sırasıyla %95–97 geri kazanım oranları elde edildi. Bu çalışma, LABS geri kazanımı için aktif karbonun adsorpsiyon sürecini kontrol eden faktörler hakkında önemli yeni bilgiler sunmaktadır. Bu bilgiler, uygulanabilir ve verimli adsorpsiyon tabanlı atık su arıtma tekniklerinin geliştirilmesinde faydalı olacaktır.
- Open Access
- 18 December 2025
- Published by Commagene Journal of Biology in Commagene Journal of Biology
- Vol. 9 (2) , 227-231
Determination of Trace Elements in Some Macro/Micro Algae Samples by Inductive Coupled Plasma-Mass Spectrometry (ICP-MS)
This study investigated the elemental composition of seven macro/micro algae species collected from Southeastern Anatolia, Türkiye using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The algae samples were prepared using a microwave digestion protocol and analyzed for major and trace elements. The dominant elements across all species were sodium (Na), potassium (K), calcium (Ca), phosphorus (p), manganese (Mn), and iron (Fe) with Na concentrations ranging from 432885.22±39056.18 to 1232879.58±21924.43 µg/kg. Trace elements such as Mg, Al, Li, Be, Cd, and Sb were present at much lower levels or below detection limits. Notably, Ni concentrations in Aphanizomenon floş-aquae (258.57±11.12 µg/kg) and Cladophora glomerata (273.44±14.58 µg/kg) and Na in Dunaliella salina (462320.32±2032.57 µg/kg) exceeded the International Atomic Energy Agency (IAEA) acceptable limits (Ni: 571±28 µg/kg; Na: 680000±23000 µg/kg). The concentrations of Ca, K, Cr, Mn, Fe, Co, Cu, Zn, As, Cd, and Pb were within IAEA-defined safety thresholds. These results suggest that most of the studied algal species are rich in essential nutrients and exhibit low levels of toxic metals supporting their potential as functional biological resources in food or pharmaceutical applications.
- 18 December 2025
- Published by Commagene Journal of Biology in Commagene Journal of Biology
- Vol. 9 (2) , 227-231
Open AccessDetermination of Trace Elements in Some Macro/Micro Algae Samples by Inductive Coupled Plasma-Mass Spectrometry (ICP-MS)
This study investigated the elemental composition of seven macro/micro algae species collected from Southeastern Anatolia, Türkiye using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The algae samples were prepared using a microwave digestion protocol and analyzed for major and trace elements. The dominant elements across all species were sodium (Na), potassium (K), calcium (Ca), phosphorus (p), manganese (Mn), and iron (Fe) with Na concentrations ranging from 432885.22±39056.18 to 1232879.58±21924.43 µg/kg. Trace elements such as Mg, Al, Li, Be, Cd, and Sb were present at much lower levels or below detection limits. Notably, Ni concentrations in Aphanizomenon floş-aquae (258.57±11.12 µg/kg) and Cladophora glomerata (273.44±14.58 µg/kg) and Na in Dunaliella salina (462320.32±2032.57 µg/kg) exceeded the International Atomic Energy Agency (IAEA) acceptable limits (Ni: 571±28 µg/kg; Na: 680000±23000 µg/kg). The concentrations of Ca, K, Cr, Mn, Fe, Co, Cu, Zn, As, Cd, and Pb were within IAEA-defined safety thresholds. These results suggest that most of the studied algal species are rich in essential nutrients and exhibit low levels of toxic metals supporting their potential as functional biological resources in food or pharmaceutical applications.
- 30 June 2025
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 197 (7) , 1-14
Novel dendrimer-functionalized SPIONs as adsorbent agents for effective removal of Cr(VI) ions
Due to its toxic effects, hexavalent chromium (Cr(VI)) has mutagenic and carcinogenic impacts on living systems. Thus, developing effective adsorbents that can quickly adsorb heavy metals is crucial for the removal process. Thanks to their outstanding and novel characteristics, superparamagnetic iron oxide nanoparticles (SPIONs) are novel structures used in various applications. For this reason, novel dendrimer-functionalized SPIONs are used for the extraction and enrichment of Cr(VI). SPIONs were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM–EDX), X-ray diffraction (XRD), transmission electron microscopy (TEM), and vibrating sample magnetometry (VSM) where their chemical compositions, crystal structures, and magnetic properties were assessed in detail. Various parameters such as the amount of adsorbent, pH, the type and concentration of eluent, adsorption time, and coexisting ions were evaluated to find the best adsorption conditions for SPIONs, where flame atomic absorption spectroscopy was used as the main investigation tool. Under the optimum conditions, the synthesized adsorbent showed an excellent selectivity towards Cr(VI) with an exceptional enrichment factor of 1403 in the presence of other interfering ions. The calibration graph was linear in the range of 0.25–2000 µg L−1 (R2 = 0.9992), and the limit of detection (LOD, 3δ/m) was 0.075 µg L−1 for Cr(VI). The relative standard deviation (RSD, n = 6) of the work for Cr(VI) was 2.8%. The proposed method was employed to real-life samples, including water, honey, and hardaliye (a traditional fermented grape juice).
- 30 June 2025
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 197 (7) , 1-14
Novel dendrimer-functionalized SPIONs as adsorbent agents for effective removal of Cr(VI) ions
Due to its toxic effects, hexavalent chromium (Cr(VI)) has mutagenic and carcinogenic impacts on living systems. Thus, developing effective adsorbents that can quickly adsorb heavy metals is crucial for the removal process. Thanks to their outstanding and novel characteristics, superparamagnetic iron oxide nanoparticles (SPIONs) are novel structures used in various applications. For this reason, novel dendrimer-functionalized SPIONs are used for the extraction and enrichment of Cr(VI). SPIONs were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM–EDX), X-ray diffraction (XRD), transmission electron microscopy (TEM), and vibrating sample magnetometry (VSM) where their chemical compositions, crystal structures, and magnetic properties were assessed in detail. Various parameters such as the amount of adsorbent, pH, the type and concentration of eluent, adsorption time, and coexisting ions were evaluated to find the best adsorption conditions for SPIONs, where flame atomic absorption spectroscopy was used as the main investigation tool. Under the optimum conditions, the synthesized adsorbent showed an excellent selectivity towards Cr(VI) with an exceptional enrichment factor of 1403 in the presence of other interfering ions. The calibration graph was linear in the range of 0.25–2000 µg L−1 (R2 = 0.9992), and the limit of detection (LOD, 3δ/m) was 0.075 µg L−1 for Cr(VI). The relative standard deviation (RSD, n = 6) of the work for Cr(VI) was 2.8%. The proposed method was employed to real-life samples, including water, honey, and hardaliye (a traditional fermented grape juice).
- 1 January 2025
- Published by Nokta Yayın Grubu
Platform: Current Muslim Affairs 2024
- 1 January 2025
- Published by Nokta Yayın Grubu
Platform: Müslüman Dünyanın Gündemi 2024
- 5 April 2024
- Published by Springer Nature in Chemical Papers
- Vol. 78 (7) , 4495-4506
Determination of lead and cadmium by magnetic solid-phase extraction (MSPE) using Co3O4@Fe3O4 nanoflowers and flame atomic absorption spectrometry (FAAS)
- 5 April 2024
- Published by Springer Nature in Chemical Papers
- Vol. 78 (7) , 4495-4506
Determination of lead and cadmium by magnetic solid-phase extraction (MSPE) using Co3O4@Fe3O4 nanoflowers and flame atomic absorption spectrometry (FAAS)
- 1 January 2024
- Published by Scientific Web Journals (SWJ) in Aquatic Research
- Vol. 7 (4) , 214-226
Determination of metals in different tissues of Trachurus trachurus from the Marmara Sea and evaluation of their health risks
The present study aimed to determine the differences in metal levels of Aluminum (Al), Cadmium (Cd), Chromium (Cr), Copper (Cu), İron (Fe), Manganese (Mn), Nickel (Ni), Lead (Pb) and Zinc (Zn) between muscle and liver tissues of Trachurus trachurus, the correlation of metal accumulation in tissues with fish length and weight was examined. Health risks and nutritional adequacy were evaluated based on metal levels accumulated in fish muscle. The results demonstrated that fish liver accumulated higher metal levels than muscle. The investigation revealed that the majority of metals present in the tissues of the fish did not exhibit a significant correlation with their size (p>0.05). It can be concluded that fish are not an adequate source of these nutrients because their nutrient levels are below reference values. The fish were found to be nutrient deficient, as the levels of nutrients were below reference values. The estimated daily intakes of all metals accumulated in muscle were below reference doses. The target hazard coefficient and target hazard index values were less than 1. Lifetime carcinogenic risk values were below 10-4, and total carcinogenic risk values were within the acceptable range. Pb and Cd concentrations in muscle exceeded the tolerable limit. The daily amount of fish that could be consumed without non-carcinogenic health risk was 181 grams for Cd and 295 grams for Pb. The daily amount of fish that could be consumed without carcinogenic health risk was 1.21 grams for Cd and 231 grams for Pb.
- 1 January 2024
- Published by Scientific Web Journals (SWJ) in Aquatic Research
- Vol. 7 (4) , 214-226
Determination of metals in different tissues of Trachurus trachurus from the Marmara Sea and evaluation of their health risks
The present study aimed to determine the differences in metal levels of Aluminum (Al), Cadmium (Cd), Chromium (Cr), Copper (Cu), İron (Fe), Manganese (Mn), Nickel (Ni), Lead (Pb) and Zinc (Zn) between muscle and liver tissues of Trachurus trachurus, the correlation of metal accumulation in tissues with fish length and weight was examined. Health risks and nutritional adequacy were evaluated based on metal levels accumulated in fish muscle. The results demonstrated that fish liver accumulated higher metal levels than muscle. The investigation revealed that the majority of metals present in the tissues of the fish did not exhibit a significant correlation with their size (p>0.05). It can be concluded that fish are not an adequate source of these nutrients because their nutrient levels are below reference values. The fish were found to be nutrient deficient, as the levels of nutrients were below reference values. The estimated daily intakes of all metals accumulated in muscle were below reference doses. The target hazard coefficient and target hazard index values were less than 1. Lifetime carcinogenic risk values were below 10-4, and total carcinogenic risk values were within the acceptable range. Pb and Cd concentrations in muscle exceeded the tolerable limit. The daily amount of fish that could be consumed without non-carcinogenic health risk was 181 grams for Cd and 295 grams for Pb. The daily amount of fish that could be consumed without carcinogenic health risk was 1.21 grams for Cd and 231 grams for Pb.
- Open Access
- 31 December 2023
- Published by Kirklareli Universitesi Muhendislik ve Fen Bilimleri Dergisi in Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi
- Vol. 9 (2) , 381-396
Determination and Speciation of Cd(II) and Pb(II) Ions Using Magnetic Solid Phase Extraction By Flame Atomic Absorption Spectroscopy
In this study, Pb(II) and Cd(II) ions were determined by Fe3O4@G2/Npht magnetic dendrimers using the solid-phase extraction (SPE) method by flame atomic absorption spectrophotometer (FAAS). The morphological and chemical properties of magnetic dendrimers were investigated using Fourier Transform Infrared (FTIR) spectroscopy and transmission electron microscopy (TEM) techniques. The magnetic characteristics of the ferromagnetic features of the magnetic nanocomposites were validated by vibrating sample magnetometry (VSM). The heavy metal ion recovery was assessed via flame atomic adsorption spectroscopy (FAAS). To ascertain the ideal adsorption system conditions, the effects of various parameters, including pH, adsorbent dose, adsorbent time, eluent type and amount, etc., were examined. Optimum conditions for heavy metal recovery using Fe3O4@G2/Npht magnetic dendrimer were determined as pH 6.5, 1M HNO3 and 100 mg for Pb(II) and pH 7.5, 1 M HNO3 and 100 mg for Cd(II). The novel material of Fe3O4@G2/Npht magnetic dendrimer for separation and pre-concentration of Pb(II) and Cd(II) was used to natural water.
- 31 December 2023
- Published by Kirklareli Universitesi Muhendislik ve Fen Bilimleri Dergisi in Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi
- Vol. 9 (2) , 381-396
Open AccessDetermination and Speciation of Cd(II) and Pb(II) Ions Using Magnetic Solid Phase Extraction By Flame Atomic Absorption Spectroscopy
In this study, Pb(II) and Cd(II) ions were determined by Fe3O4@G2/Npht magnetic dendrimers using the solid-phase extraction (SPE) method by flame atomic absorption spectrophotometer (FAAS). The morphological and chemical properties of magnetic dendrimers were investigated using Fourier Transform Infrared (FTIR) spectroscopy and transmission electron microscopy (TEM) techniques. The magnetic characteristics of the ferromagnetic features of the magnetic nanocomposites were validated by vibrating sample magnetometry (VSM). The heavy metal ion recovery was assessed via flame atomic adsorption spectroscopy (FAAS). To ascertain the ideal adsorption system conditions, the effects of various parameters, including pH, adsorbent dose, adsorbent time, eluent type and amount, etc., were examined. Optimum conditions for heavy metal recovery using Fe3O4@G2/Npht magnetic dendrimer were determined as pH 6.5, 1M HNO3 and 100 mg for Pb(II) and pH 7.5, 1 M HNO3 and 100 mg for Cd(II). The novel material of Fe3O4@G2/Npht magnetic dendrimer for separation and pre-concentration of Pb(II) and Cd(II) was used to natural water.
- Open Access
- 30 June 2023
- Published by Open Journal of Nano in Open Journal of Nano
- Vol. 8 (1) , 36-49
Sonochemical Removal of Highly Toxic Aqueous Cd2+ and Cr6+ Ions Using Dandelion-like Co3O4 Nanoflowers
In this work, cobalt(II/III) oxide (Co3O4) nano/microflowers were practically synthesized in laboratory conditions. Adsorbence properties of the nanoflowers were investigated for the removal of cadmium and chromium heavy metal ions. To assess the chemical and morphological characteristics of Co3O4 nanoflowers, Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), field emission electron microscopy (FESEM), Energy dispersive spectroscopy (EDS), and was used. To determine the adsorbence mechanism in detail, eluent concentration, eluent type, solution pH, adsorbent amount, solution volume, and adsorption duration were studied. In these assessments, flame atomic absorption spectroscopy (FAAS) was used. For Cr6+, adsorption optimum parameters were determined as 3M HNO3, pH 6.5, 150mg, 30mL, 60min. For Cd2+, optimum parameters were determined as 3M HNO3, pH 6.0, 100mg, 10mL, 30min. Co3O4, nanoflowers are eco-friendly adsorbent materials for the adsorption of Cd6+ and Cd2+ heavy metal ions since the production method is affordable and practical.
- 30 June 2023
- Published by Open Journal of Nano in Open Journal of Nano
- Vol. 8 (1) , 36-49
Open AccessSonochemical Removal of Highly Toxic Aqueous Cd2+ and Cr6+ Ions Using Dandelion-like Co3O4 Nanoflowers
In this work, cobalt(II/III) oxide (Co3O4) nano/microflowers were practically synthesized in laboratory conditions. Adsorbence properties of the nanoflowers were investigated for the removal of cadmium and chromium heavy metal ions. To assess the chemical and morphological characteristics of Co3O4 nanoflowers, Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), field emission electron microscopy (FESEM), Energy dispersive spectroscopy (EDS), and was used. To determine the adsorbence mechanism in detail, eluent concentration, eluent type, solution pH, adsorbent amount, solution volume, and adsorption duration were studied. In these assessments, flame atomic absorption spectroscopy (FAAS) was used. For Cr6+, adsorption optimum parameters were determined as 3M HNO3, pH 6.5, 150mg, 30mL, 60min. For Cd2+, optimum parameters were determined as 3M HNO3, pH 6.0, 100mg, 10mL, 30min. Co3O4, nanoflowers are eco-friendly adsorbent materials for the adsorption of Cd6+ and Cd2+ heavy metal ions since the production method is affordable and practical.