JYJuha Yli-Kaakinen

Juha Yli-Kaakinen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Juha Yli-Kaakinen has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Flexible Fast-Convolution Processing for Cellular Radio Evolution

    by Juha Yli-Kaakinen, Toni Levanen, Arto Palin, Markku Renfors, Mikko Valkama

    Orthogonal frequency-division multiplexing (OFDM) has been selected as a baseline waveform for long-term evolution (LTE) and fifth-generation new radio (5G NR). Fast-convolution (FC)-based frequency-domain signal processing has been recently considered as an effective tool for transmitter and receiver side subband filtering of OFDM-based waveforms. However, for the original continuous FC-based model, the filtering can, in general, be configured in time-direction only with the granularity of half subframe, corresponding to 7, 14, or 28 symbols with 15 kHz, 30 kHz, or 60 kHz subcarrier spacing, respectively. In this paper, we present a symbol-synchronous FC-processing scheme flexibly allowing filter re-configuration with the time resolution equal to one OFDM symbol while supporting tight carrier-wise filtering for 5G NR in mixed-numerology scenarios with adjustable subcarrier spacings, center frequencies, and subband bandwidths, as well as providing co-existence with LTE. Proposed approach segments each stream of time-domain OFDM symbols into overlapping processing blocks of fixed size. Symbol synchronous processing is achieved by dynamically adjusting the overlap between the processing blocks while aligning the payload part of the processing block with the boundaries of the OFDM symbols. The proposed scheme is demonstrated to support the envisioned use cases of 5G NR and provide a flexible starting point for sixth generation (6G) development.


  • Open Access

    Frequency-Domain Signal Processing for Spectrally-Enhanced CP-OFDM Waveforms in 5G New Radio

    by Juha Yli-Kaakinen, Alaaeddin Loulou, Toni Levanen, Kari Pajukoski, Arto Palin, Markku Renfors, Mikko Valkama

    Orthogonal frequency-division multiplexing (OFDM) has been selected as the basis for the fifth-generation new radio (5G NR) waveform developments. However, effective signal processing tools are needed for enhancing the OFDM spectrum in various advanced transmission scenarios. In earlier work, we have shown that fast-convolution (FC) processing is a very flexible and efficient tool for filtered-OFDM signal generation and receiver-side subband filtering, e.g., for the mixed-numerology scenarios of the 5G NR. FC filtering approximates linear convolution through effective fast Fourier transform (FFT)-based circular convolutions using partly overlapping processing blocks. However, with the continuous overlap-and-save and overlap-and-add processing models with fixed block-size and fixed overlap, the FC-processing blocks cannot be aligned with all OFDM symbols of a transmission frame. Furthermore, 5G NR numerology does not allow to use transform lengths shorter than 128 because this would lead to non-integer cyclic prefix (CP) lengths. In this article, we present new FC-processing schemes which solve or avoid the mentioned limitations. These schemes are based on dynamically adjusting the overlap periods and extrapolating the CP samples, which make it possible to align the FC blocks with each OFDM symbol, even in case of variable CP lengths. This reduces complexity and latency, e.g., in mini-slot transmissions and, as an example, allows to use 16-point transforms in case of a 12-subcarrier-wide subband allocation, greatly reducing the implementation complexity. On the receiver side, the proposed scheme makes it possible to effectively combine cascaded inverse and forward FFT units in FC-filtered OFDM processing. Transform decomposition is used to simplify these computations, leading to significantly reduced implementation complexity in various transmission scenarios. A very extensive set of numerical results is also provided, in terms of the radio-link performance and associated processing complexity.


  • Open Access

    Novel Iterative Clipping and Error Filtering Methods for Efficient PAPR Reduction in 5G and Beyond

    by Selahattin Gokceli, Toni Levanen, Taneli Riihonen, Juha Yli-Kaakinen, Alberto Brihuega, Matias Turunen, Markku Renfors, Mikko Valkama

    The physical-layer radio access of 5G New Radio (NR) and other modern wireless networks builds on the cyclic prefix (CP) orthogonal frequency-division multiplexing (OFDM), known to suffer from the high peak-to-average power ratio (PAPR) challenge. In this paper, novel PAPR reduction methods are developed, referred to as the iterative clipping and weighted error filtering (ICWEF) approach. To this end, clipping noise is separated from the data signal in frequency domain and properly tailored frequency-selective clipping noise filtering is adopted to control the tradeoff between PAPR reduction and transmitted signal quality. Furthermore, as 5G NR networks support adopting different OFDM numerologies at different bandwidth parts within one channel bandwidth, the ICWEF approach is also extended to take into account and suppress the resulting inter-numerology interference—something that most existing state-of-the-art methods do not consider. To facilitate comprehensive performance evaluations, a software-defined radio based prototyping testbed including a high-power base station power amplifier is also developed and used for assessing the performance of PAPR reduction solutions. The proposed ICWEF-based PAPR reduction concept is thereon thoroughly validated with extensive numerical and experimental results and shown to outperform the existing state-of-the-art reference solutions.


  • Filtered Multicarrier Transmission

    by Juha Yli‐Kaakinen, Markku Renfors, Eleftherios Kofidis


  • Open Access

    SDR Prototype for Clipped and Fast-Convolution Filtered OFDM for 5G New Radio Uplink

    by Selahattin Gokceli, Pablo Pascual Campo, Toni Levanen, Juha Yli-Kaakinen, Matias Turunen, Markus Allen, Taneli Riihonen, Arto Palin, Markku Renfors, Mikko Valkama

    In wireless communications, higher transmission power enables higher coverage or higher data rate. However, due to hardware limitations, achieving high power efficiency becomes challenging. The main issue is that at high power region close to power amplifier (PA) saturation point the highly non-linear response of the PA leads to significant spectral regrowth. In such a case, waveforms with inherently good spectral containment allow for more spectral degradation and can be seen as the most effective solution for the problem. In this study, a fifth-generation new radio (5G NR) user equipment (UE) transmit power is improved by utilizing fast-convolution filtered orthogonal-frequency-division-multiplexing (FC-F-OFDM) waveform, which has an excellent spectral containment performance. A novel method is proposed for improving the peak-to-average-power ratio (PAPR) of FC-F-OFDM waveform, based on applying clipping before FC processing and allocating the clipping noise that stems from the applied clipping, over not only on active band, but a wider band consisting of both the in-band and guard-band regions. An accurate transmitter chain simulator including a measured memory-polynomial model of a practical PA is used to evaluate a wide set of different subcarrier spacings and channel bandwidths. Then, to validate the numerical results, a software-defined radio (SDR) based testbed is created and the modeled PA is used in this testbed. Weighted overlap-and-add (WOLA) based OFDM, also with clipping, is used as a reference in both the numerical evaluations and in measurements. For both waveforms, the transmitted signal quality, out-of-band emissions, and maximum PA output powers are measured under 5G NR specifications and results for different subcarrier spacings and channel bandwidths are provided to prove the benefits and robustness of the presented FC-F-OFDM approach.


  • Generalized Fast-Convolution-Based Filtered-OFDM: Techniques and Application to 5G New Radio

    by Juha Yli-Kaakinen, Toni Levanen, Arto Palin, Markku K. Renfors, Mikko Valkama

    This paper proposes a generalized model and methods for fast-convolution (FC)-based waveform generation and processing with specific applications to fifth generation new radio (5G-NR). Following the progress of 5G-NR standardization in 3rd generation partnership project (3GPP), the main focus is on subband-filtered cyclic prefix (CP) orthogonal frequency-division multiplexing (OFDM) processing with specific emphasis on spectrally well localized transmitter processing. Subband filtering is able to suppress the interference leakage between adjacent subbands, thus supporting different numerologies for so-called bandwidth parts as well as asynchronous multiple access. The proposed generalized FC scheme effectively combines overlapped block processing with time- and frequency-domain windowing to provide highly selective subband filtering with very low intrinsic interference level. Jointly optimized multi-window designs with different allocation sizes and design parameters are compared in terms of interference levels and implementation complexity. The proposed methods are shown to clearly outperform the existing state-of-the-art windowing and filtering based methods.


  • Multiplierless Filtered-OFDM Transmitter for Narrowband IoT Devices

    by AlaaEddin Loulou, Juha Yli-Kaakinen, Toni Levanen, Vesa Lehtinen, Frank Schaich, Thorsten Wild, Markku Renfors, Mikko Valkama

    In cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM)-based radio access, the coexistence of different technologies without precise time-frequency synchronization is limited due to high out-of-band (OOB) emissions. Therefore, the spectrum enhancement techniques play a key role in relaxing the synchronization and power control requirements. This allows a higher degree of opportunistic spectrum use with minimized interference. In addition, all the transmitting devices have to fulfill specific transmitted signal quality requirements, including the maximum OOB radiated signal power. With the orthogonal frequency-division multiplexing (OFDM)-based radio access, some additional signal processing for improved spectrum containment is commonly needed to achieve these requirements. The filtering and time-domain windowing are two fundamentally different approaches for spectrum enhancement. The filtered OFDM (F-OFDM) provides better spectrum localization than the time-windowing schemes [such as windowed overlap-add (WOLA)], with the cost of higher complexity. This article introduces low-complexity solutions for spectrally enhanced narrowband OFDM transmitters based on the use of lookup tables (LUTs). The proposed LUT approach, requiring only memory units and a low number of additions, allows to avoid all computationally expensive operations in online transmitter processing, as it builds the transmitted signal by summing the stored partial waveforms optimized offline. In certain cases, completely multiplication- and summation-free designs are possible. The transmitters of narrowband Internet of Things (NB-IoT) devices are natural applications for the proposed LUT approach, as they require additional digital baseband signal processing to reach the emission requirements. It is shown that the proposed LUT schemes can provide significant savings in real-time computations of NB-IoT devices, while fulfilling the 3GPP requirements.


  • PAPR Reduction With Mixed-Numerology OFDM

    by Selahattin Gokceli, Toni Levanen, Juha Yli-Kaakinen, Taneli Riihonen, Markku Renfors, Mikko Valkama

    High peak-to-average power ratio (PAPR) is a critical problem in orthogonal frequency-division multiplexing (OFDM). The fifth-generation New Radio (5G NR) facilitates the utilization of multiple heterogeneous bandwidth parts (BWPs), which complicates the PAPR problem even further and introduces inter-numerology interference (INI) between the BWPs. This paper proposes two novel schemes to reduce the PAPR of mixed-numerology OFDM signals. The first scheme is an original enhanced iterative clipping-and-error-filtering (ICEF) approach that cancels efficiently the INI along with PAPR reduction. This allows to achieve efficient PAPR reduction while being compatible with well-known windowed overlap-and-add (WOLA) processing. The second scheme is based on fast-convolution (FC) processing, where PAPR reduction is embedded in the FC filtering carried out using overlapping processing blocks. This allows one to use any existing block-wise PAPR reduction method to reduce the composite signals’ PAPR with arbitrary BWP waveforms, and it is thus especially well suited for processing mixed-numerology composite waveforms carrying multiple BWPs with different OFDM numerologies. The performance of the proposed algorithms is evaluated in the 5G NR context, and the essential performance advantages are demonstrated and quantified.


  • Look-Up Table Based Implementation of Ultra-Low Complexity Narrowband OFDM Transmitters

    by AlaaEddin Loulou, Juha Yli-Kaakinen, Toni Levanen, Vesa Lehtinen, Frank Schaich, Thorsten Wild, Markku Renfors, Mikko Valkama

    In cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) based radio access, the coexistence of different systems without precise time-frequency synchronization is limited due to high out-of-band emissions. Therefore, filtered-OFDM (F-OFDM) type spectrum enhancement can play a key role to relax the synchronization requirements as it provides well-contained spectrum through subband based filtering. This allows higher degree of flexible and dynamic spectrum use with minimized interference. However, this approach increases computational complexity compared with CP-OFDM. This paper presents a low-complexity solution for narrow-band F-OFDM transmitters based on the use of a look-up table (LUT) to store the F-OFDM waveform. This approach can be applied equally well for filtered version of the discrete Fourier transform-spread-OFDM (DFT-s-OFDM) waveform with small number of subcarriers. DFT-s-OFDM is commonly used in the uplink of OFDM-based systems to mitigate high peak-to-average power ratio (PAPR) of OFDM. The scheme is particularly interesting for the transmitters of Internet-of-Things (IoT) or massive machine type communication (mMTC) devices operating at low data rate. The LUT approach requires only memory units and relatively low number of additions. Moreover, we propose a low-complexity solution to deal with the CP-length variations within the transmission frame. The required memory wordlengths are evaluated through simulations. Comparisons with time-domain filtering and fast-convolution-based filtering solutions are included as well.


  • Software-Defined Radio Prototype for Fast-Convolution-Based Filtered OFDM in 5G NR

    by Selahattin Gokceli, Toni Levanen, Juha Yli-Kaakinen, Matias Turunen, Markus Allen, Taneli Riihonen, Arto Palin, Markku Renfors, Mikko Valkama

    In this work, we provide first-in-class measurement results for fast-convolution-based filtered orthogonal frequencydivision multiplexing (FC-F-OFDM) processing implemented on a universal software radio peripheral (USRP) software-defined radio (SDR). The fast-convolution-based processing offers a highly efficient and flexible filtered OFDM scheme allowing to achieve high spectral utilization in different channel bandwidths. Through the SDR implementation and transmitter spectrum emission measurements, we show that FC-F-OFDM allows to increase spectrum utilization compared to the fifth generation new radio (5G NR) Release-15 requirements. Furthermore, considering the out-of-band emission masks and adjacent-channel-leakage-ratio requirements, FC-F-OFDM provides a larger interference margin than well-known windowed overlap-and-add OFDM processing.