Azima L. G. Saad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Azima L. G. Saad has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
A. M. Hassan
Petrochemical Department, Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt
5 shared publicationsM. Stockhausen
Institut für Physikalische Chemie der Universität Münster, D-48149 Münster Germany
4 shared publicationsO. I. H. Dimitry
Petrochemicals Department , Egyptian Petroleum Research Institute , Nasr City , Cairo , Egypt
4 shared publicationsY. Barakat
Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt
4 shared publicationsM. G. M. Ahmed
Petrochemical Department, Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt
3 shared publicationsS. A. El-Kholy
Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt
3 shared publications
Latest Publications
- 31 August 2012
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 172, 1-7
Some electrical and physical properties of castor oil adducts dissolved in 1-propanol
- 31 August 2012
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 172, 1-7
Some electrical and physical properties of castor oil adducts dissolved in 1-propanol
- 1 April 2012
- Published by SAGE Publications in International Journal of Green Nanotechnology
- Vol. 4 (2) , 117-134
Studies of Particle Dispersion in Poly(methyl methacrylate)/Organically Modified Montmorillonite Nanocomposites
Poly(methyl methacrylate) (PMMA) was mixed with 1, 3, 5, 7, and 10 wt% of Cloisite 15A to obtain PMMA-based nanocomposites. The thermal stabilities of the obtained nanocomposites were characterized by thermal analysis using a thermogravimetric analyzer (TGA), which showed that addition of organoclay to PMMA up to 5 wt% increased its thermal stability, whereas thermal stabilization was less efficient at 10 wt%. The interaction between PMMA and silicate layers was studied by Fourier transform infrared (FTIR) spectroscopy, which confirmed strong interactions between the nanometric silicate layers and PMMA segments. The electrical properties were studied through the permittivity, dielectric loss, and conductivity measurements. The electrical conductivity, which describes the ionic mobility of the systems, was studied as a function of temperature and showed that the conductivity of PMMA was enhanced upon increasing the organoclay content up to 5 wt% and was then decreased to some extent with a further increase to 10 wt%. The activation energy, E σ, obtained from the dependency of electrical conductivity (σ) on temperature using the Arrhenius equation, was found to be lowest for the composite containing 5 wt% of organoclay. The dispersed behavior of organoclay in the PMMA matrix was identified using X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses, and it was found that the organoclay layers were homogeneously dispersed in the PMMA matrix when 5 wt% of Cloisite 15A was used.
- 1 April 2012
- Published by SAGE Publications in International Journal of Green Nanotechnology
- Vol. 4 (2) , 117-134
Studies of Particle Dispersion in Poly(methyl methacrylate)/Organically Modified Montmorillonite Nanocomposites
Poly(methyl methacrylate) (PMMA) was mixed with 1, 3, 5, 7, and 10 wt% of Cloisite 15A to obtain PMMA-based nanocomposites. The thermal stabilities of the obtained nanocomposites were characterized by thermal analysis using a thermogravimetric analyzer (TGA), which showed that addition of organoclay to PMMA up to 5 wt% increased its thermal stability, whereas thermal stabilization was less efficient at 10 wt%. The interaction between PMMA and silicate layers was studied by Fourier transform infrared (FTIR) spectroscopy, which confirmed strong interactions between the nanometric silicate layers and PMMA segments. The electrical properties were studied through the permittivity, dielectric loss, and conductivity measurements. The electrical conductivity, which describes the ionic mobility of the systems, was studied as a function of temperature and showed that the conductivity of PMMA was enhanced upon increasing the organoclay content up to 5 wt% and was then decreased to some extent with a further increase to 10 wt%. The activation energy, E σ, obtained from the dependency of electrical conductivity (σ) on temperature using the Arrhenius equation, was found to be lowest for the composite containing 5 wt% of organoclay. The dispersed behavior of organoclay in the PMMA matrix was identified using X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses, and it was found that the organoclay layers were homogeneously dispersed in the PMMA matrix when 5 wt% of Cloisite 15A was used.
- 16 August 2011
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 123 (3) , 1407-1420
Studies of particle dispersion in plasticized poly(vinyl chloride)/montmorillonite nanocomposites
- 16 August 2011
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 123 (3) , 1407-1420
Studies of particle dispersion in plasticized poly(vinyl chloride)/montmorillonite nanocomposites
- 1 July 2011
- Published by SAGE Publications in International Journal of Green Nanotechnology
- Vol. 3 (3) , 197-212
Studies of Particle Dispersion in Elastomeric Polyurethane/Organically Modified Montmorillonite Nanocomposites
Elastomeric polyurethane (PU) was mixed with 1, 3, 5, 7, and 10 wt% of Cloisite 20A to obtain PU-based nanocomposites. The thermal stabilities of the obtained products were characterized by thermal analysis using a thermogravimetric analyzer (TGA), which showed that addition of 5 wt% of organoclay to the PU increased its stability, whereas thermal stabilization was less efficient at 10 wt%. The electrical conductivities of these composites were studied as a function of temperature, and it was found that the conductivity of PU was enhanced upon using 5 wt% of organoclay. The tensile strength, elongation (%), and Young's modulus were considerably enhanced upon increasing the organoclay content to 5 wt%, but were then decreased to some extent upon further increase of the nanoparticle loading to 10 wt%. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to study these nanocomposite structures, and it was found that the organoclay is fully exfoliated in the PU matrix when 5 wt% of Cloisite 20A was used.
- 1 July 2011
- Published by SAGE Publications in International Journal of Green Nanotechnology
- Vol. 3 (3) , 197-212
Studies of Particle Dispersion in Elastomeric Polyurethane/Organically Modified Montmorillonite Nanocomposites
Elastomeric polyurethane (PU) was mixed with 1, 3, 5, 7, and 10 wt% of Cloisite 20A to obtain PU-based nanocomposites. The thermal stabilities of the obtained products were characterized by thermal analysis using a thermogravimetric analyzer (TGA), which showed that addition of 5 wt% of organoclay to the PU increased its stability, whereas thermal stabilization was less efficient at 10 wt%. The electrical conductivities of these composites were studied as a function of temperature, and it was found that the conductivity of PU was enhanced upon using 5 wt% of organoclay. The tensile strength, elongation (%), and Young's modulus were considerably enhanced upon increasing the organoclay content to 5 wt%, but were then decreased to some extent upon further increase of the nanoparticle loading to 10 wt%. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to study these nanocomposite structures, and it was found that the organoclay is fully exfoliated in the PU matrix when 5 wt% of Cloisite 20A was used.
- 3 February 2010
- Published by Springer Nature in Journal of Polymer Research
- Vol. 17 (6) , 801-813
Preparation and properties of elastomeric polyurethane/organically modified montmorillonite nanocomposites
- 3 February 2010
- Published by Springer Nature in Journal of Polymer Research
- Vol. 17 (6) , 801-813
Preparation and properties of elastomeric polyurethane/organically modified montmorillonite nanocomposites
- 1 January 2009
- Published by LUKASIEWICZ Research Network - Industrial Chemistry Research Institute in Polimery
- Vol. 54 (01) , 008-014
Poly(vinyl chloride)/nanoclay nanocomposites - electrical and mechanical properties
- 1 January 2009
- Published by LUKASIEWICZ Research Network - Industrial Chemistry Research Institute in Polimery
- Vol. 54 (01) , 008-014
Poly(vinyl chloride)/nanoclay nanocomposites - electrical and mechanical properties
- 17 October 2008
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 110 (10) , 926-934
Some biophysical properties of castor oil esterified with some acid anhydrides
A series of castor oil adducts were synthesized by esterification of castor oil with acid anhydrides: phthalic, maleic and succinic anhydrides. The chemical structure of castor oil and the prepared adducts were characterized by means of IR and 1H NMR spectroscopy. The number‐average and weight‐average molecular weights were measured by gel permeation chromatography. The electrical properties were studied through the permittivity, dielectric loss and conductivity measurements, which are considered to be in the range of electrical insulation. The electrical conductivity, which describes the ionic mobility of the systems, was found to be in the range of 10–9 to 10–12 S/cm. This indicates that castor oil and its esters could be used for antistatic applications. The viscosity η and the activation energy Eη, obtained from the dependency of viscosity on temperature using the Arrhenius equation, were found to increase with increasing molecular weight of the system. The effect of different concentrations of castor oil and its esters on the growth activities of the sugar beet pathogens R. solani and S. rolfsii was studied through the determination of percent germination, average length of hyphal extensions, dry mass yield and the production of sclerotia. The obtained data indicate that the esterification of castor oil with anhydrides improves the antifungal activity.
- 17 October 2008
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 110 (10) , 926-934
Some biophysical properties of castor oil esterified with some acid anhydrides
A series of castor oil adducts were synthesized by esterification of castor oil with acid anhydrides: phthalic, maleic and succinic anhydrides. The chemical structure of castor oil and the prepared adducts were characterized by means of IR and 1H NMR spectroscopy. The number‐average and weight‐average molecular weights were measured by gel permeation chromatography. The electrical properties were studied through the permittivity, dielectric loss and conductivity measurements, which are considered to be in the range of electrical insulation. The electrical conductivity, which describes the ionic mobility of the systems, was found to be in the range of 10–9 to 10–12 S/cm. This indicates that castor oil and its esters could be used for antistatic applications. The viscosity η and the activation energy Eη, obtained from the dependency of viscosity on temperature using the Arrhenius equation, were found to increase with increasing molecular weight of the system. The effect of different concentrations of castor oil and its esters on the growth activities of the sugar beet pathogens R. solani and S. rolfsii was studied through the determination of percent germination, average length of hyphal extensions, dry mass yield and the production of sclerotia. The obtained data indicate that the esterification of castor oil with anhydrides improves the antifungal activity.
- 22 June 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 101 (5) , 3537-3549
Electrical/mechanical properties and activation energies of some poly(2‐vinylpyridine)‐metal complexes
- 22 June 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 101 (5) , 3537-3549
Electrical/mechanical properties and activation energies of some poly(2‐vinylpyridine)‐metal complexes
- 5 December 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 91 (3) , 1590-1598
Studies of electrical and mechanical properties of poly(vinyl chloride) mixed with electrically conductive additives
Different samples of poly(vinyl chloride) (PVC) compositions were formulated from PVC, a polar plasticizer such as dioctylphthalate (DOP), and variable proportions of electrically conductive additives such as fast extrusion furnace (FEF) carbon black (CB), poly(vinylpyridine) (PVP), or polyacrylonitrile (PAN). Epoxidized soybean oil was added as a heat stabilizer. Samples of the PVC–CB system were also prepared by dispersing different concentrations of CB into the PVC matrix. The electrical studies showed that the addition of CB to the PVC–DOP system produces a plasticized PVC with high electrical conductivity whereas the compounding of PVC with CB produces a sample with much higher electrical conductivity. The effect of the structure of PVP and PAN on the electrical and mechanical properties of the PVC–DOP system was also studied to obtain a semiconductive plasticized PVC with good mechanical properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1590–1598, 2004
- 5 December 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 91 (3) , 1590-1598
Studies of electrical and mechanical properties of poly(vinyl chloride) mixed with electrically conductive additives
Different samples of poly(vinyl chloride) (PVC) compositions were formulated from PVC, a polar plasticizer such as dioctylphthalate (DOP), and variable proportions of electrically conductive additives such as fast extrusion furnace (FEF) carbon black (CB), poly(vinylpyridine) (PVP), or polyacrylonitrile (PAN). Epoxidized soybean oil was added as a heat stabilizer. Samples of the PVC–CB system were also prepared by dispersing different concentrations of CB into the PVC matrix. The electrical studies showed that the addition of CB to the PVC–DOP system produces a plasticized PVC with high electrical conductivity whereas the compounding of PVC with CB produces a sample with much higher electrical conductivity. The effect of the structure of PVP and PAN on the electrical and mechanical properties of the PVC–DOP system was also studied to obtain a semiconductive plasticized PVC with good mechanical properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1590–1598, 2004
- 1 December 2000
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 89 (1-3) , 57-79
Dielectric relaxation study of binary and ternary diol(s)/mono-alcohol mixtures in cyclohexane
- 1 December 2000
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 89 (1-3) , 57-79
Dielectric relaxation study of binary and ternary diol(s)/mono-alcohol mixtures in cyclohexane