Manav Saxena
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Manav Saxena has a total of 192 co-authors. Here are the top co-authors by number of shared publications:
- Akshaya Kumar Samal
Jain University
22 shared publications - Sabyasachi Sarkar
Department of Chemistry, Indian Institute of Engineering Science and Technology, Howrah-711103, India
12 shared publications - Sai Rashmi Manippady
Faculty of Chemistry University of Warsaw Warsaw Poland
8 shared publications - Sayali Ashok Patil
Centre for Nano and Material Sciences, JAIN (Deemed-to-be University), Jain Global Campus, Ramanagara, Bengaluru 562112, Karnataka, India
8 shared publications Amanda Sfeir
Université de Lille CNRS Centrale Lille Université Artois UMR 8181‐UCCS‐12 Unité de Catalyse et Chimie du Solide Lille 59000 France
6 shared publications- Chandra Sekhar Rout
Jain University
6 shared publications
Latest Publications
- 28 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (44) , 60806-60826
Electronic Structure Modulation and Electrochemically Induced Reconstruction of Ni-Doped Fe Oxyhydroxides for Overall Water Splitting
Structurally analogous metal oxyhydroxides such as NiFeOOH and CoFeOOH lie at the pinnacle of the oxygen evolution reaction (OER) volcano plot for alkaline water electrolysis. However, stabilization of a single FeOOH phase is inherently challenging because of the small thermodynamic energy differences among FeOOH polymorphs and the phase selection being governed by crystallization kinetics. Herein, we report a heterovalent Ni doping strategy to stabilize β-FeOOH structural morphology and enhance the local electric field, thereby tuning its electronic conductivity to promote OER activity. Moreover, Ni doping alters the interfacial structure in an optimal OH– ionic environment by lowering the reaction energy barriers at Fe active sites with a significantly lower adsorption free energy of 3.56 eV for the *OOH intermediate. Under cathodic polarization, NFO24/CFC undergoes in situ reconstruction, transforming bulky α-Fe2O3 NCs into hydroxylated rich FeOOH-like thin nanosheets. This structural evolution generates abundant active sites and facilitates charge-transfer kinetics, thereby accounting for its superior hydrogen evolution reaction (HER) activity. Consequently, NFO6/CFC delivers a high anodic current density with an OER overpotential of 355 mV, while NFO24/CFC exhibits superior HER performance with an overpotential of 272 mV at a current density of 10 mA cm–2 in alkaline media. Furthermore, the two-electrode assembly using NFO6/CFC∥NFO24/CFC operates at a cell voltage of 1.87 V to drive overall water splitting and demonstrates long-term stability of 24 h at 10 mA cm–2 in alkaline conditions.
- 28 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (44) , 60806-60826
Electronic Structure Modulation and Electrochemically Induced Reconstruction of Ni-Doped Fe Oxyhydroxides for Overall Water Splitting
Structurally analogous metal oxyhydroxides such as NiFeOOH and CoFeOOH lie at the pinnacle of the oxygen evolution reaction (OER) volcano plot for alkaline water electrolysis. However, stabilization of a single FeOOH phase is inherently challenging because of the small thermodynamic energy differences among FeOOH polymorphs and the phase selection being governed by crystallization kinetics. Herein, we report a heterovalent Ni doping strategy to stabilize β-FeOOH structural morphology and enhance the local electric field, thereby tuning its electronic conductivity to promote OER activity. Moreover, Ni doping alters the interfacial structure in an optimal OH– ionic environment by lowering the reaction energy barriers at Fe active sites with a significantly lower adsorption free energy of 3.56 eV for the *OOH intermediate. Under cathodic polarization, NFO24/CFC undergoes in situ reconstruction, transforming bulky α-Fe2O3 NCs into hydroxylated rich FeOOH-like thin nanosheets. This structural evolution generates abundant active sites and facilitates charge-transfer kinetics, thereby accounting for its superior hydrogen evolution reaction (HER) activity. Consequently, NFO6/CFC delivers a high anodic current density with an OER overpotential of 355 mV, while NFO24/CFC exhibits superior HER performance with an overpotential of 272 mV at a current density of 10 mA cm–2 in alkaline media. Furthermore, the two-electrode assembly using NFO6/CFC∥NFO24/CFC operates at a cell voltage of 1.87 V to drive overall water splitting and demonstrates long-term stability of 24 h at 10 mA cm–2 in alkaline conditions.
- 15 May 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (36) , 23640-23683
Solid electrolytes for solid-state-supercapacitors and their interface chemistry: gel polymers, ionic liquids, ceramics, and beyond
Conventional supercapacitors are limited by liquid electrolytes, which pose safety risks, have narrow electrochemical stability windows, are prone to leakage, and offer limited mechanical flexibility. Solid-state and quasi-solid-state electrolytes have appeared as promising alternatives, particularly for flexible and wearable energy storage devices. This review comprehensively summarizes recent developments in polymer electrolytes, inorganic ceramics, ionic gels, and organic–inorganic composites, highlighting their roles in ionic conductivity, electrochemical stability, operating voltage, and device performance. Polymer electrolytes, which combine polymer flexibility with thermal stability, mechanical strength, and enhanced ion transport facilitated by the incorporation of inorganic fillers, receive special attention due to their interface compatibility with solid electrodes. Key strategies such as filler incorporation, polymer crystallinity suppression, in situ polymerization and interfacial engineering to improve electrode–electrolyte contact are critically discussed. Furthermore, advanced in situ and operando characterization techniques are highlighted for their ability to probe buried solid–solid interfaces, track interfacial degradation, and monitor ion transport dynamics in real time. Finally, the review outlines the current challenges and future directions for designing high-performance, safe, and flexible solid-state supercapacitors, providing valuable insights for the development of next-generation energy storage technologies.
- 15 May 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (36) , 23640-23683
Solid electrolytes for solid-state-supercapacitors and their interface chemistry: gel polymers, ionic liquids, ceramics, and beyond
Conventional supercapacitors are limited by liquid electrolytes, which pose safety risks, have narrow electrochemical stability windows, are prone to leakage, and offer limited mechanical flexibility. Solid-state and quasi-solid-state electrolytes have appeared as promising alternatives, particularly for flexible and wearable energy storage devices. This review comprehensively summarizes recent developments in polymer electrolytes, inorganic ceramics, ionic gels, and organic–inorganic composites, highlighting their roles in ionic conductivity, electrochemical stability, operating voltage, and device performance. Polymer electrolytes, which combine polymer flexibility with thermal stability, mechanical strength, and enhanced ion transport facilitated by the incorporation of inorganic fillers, receive special attention due to their interface compatibility with solid electrodes. Key strategies such as filler incorporation, polymer crystallinity suppression, in situ polymerization and interfacial engineering to improve electrode–electrolyte contact are critically discussed. Furthermore, advanced in situ and operando characterization techniques are highlighted for their ability to probe buried solid–solid interfaces, track interfacial degradation, and monitor ion transport dynamics in real time. Finally, the review outlines the current challenges and future directions for designing high-performance, safe, and flexible solid-state supercapacitors, providing valuable insights for the development of next-generation energy storage technologies.
- 2 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
In situ / operando characterization of MXene electrodes for energy storage applications
Importance of in situ/operando characterization techniques.
- 2 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
In situ / operando characterization of MXene electrodes for energy storage applications
Importance of in situ/operando characterization techniques.
- Top Cited Papers
- 10 January 2026
- Published by Elsevier in Progress in Materials Science
- Vol. 159
Advances in electrochemical CO2 reduction to CO for enabling A sustainable energy economy
- 10 January 2026
- Published by Elsevier in Progress in Materials Science
- Vol. 159
Top Cited PapersAdvances in electrochemical CO2 reduction to CO for enabling A sustainable energy economy
- 29 December 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (7) , 3739-3748
Large-area freestanding 2D Ni/Co vertical heterostructures with strong interfacial coupling for efficient oxygen evolution reaction
Designing vertical heterostructures from 2D ultrathin nanosheets provides an effective pathway to improve energy conversion performance by maximizing the density of accessible catalytic sites, enabling efficient interfacial charge migration, and inducing favorable electronic band alignment. Such electronic and structural modifications collectively regulate the adsorption energies of key intermediates, thereby reducing the energy barriers governing the oxygen evolution reaction (OER). Achieving anisotropic crystal growth by disrupting lattice symmetry remains a key challenge for non-layered systems. For transition metal hydroxides, it is crucial to tackle issues such as disordered stacking, synthesis complexity, structural fragility, and insufficient interfacial integration. Herein, we synthesized ultrathin 2D Nickel/Cobalt hydroxide vertical heterostructures through a wet-chemical synthesis approach. The obtained free-standing vertical heterostructures was subsequently utilized as an active electrocatalyst for OER. The electrocatalyst delivered an overpotential (η) of 364 mV (vs. RHE) at 10 mA cm-2, along with a Tafel slope of 70 mV dec-1, reflecting efficient reaction kinetics. The DFT analysis indicates that interfacial interaction between the layers is the key parameter for OER activity. This combined experimental and theoretical work demonstrates an effective approach to design 2D heterointerface-based electrocatalysts with enhanced performance and maximized material.
- 29 December 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (7) , 3739-3748
Large-area freestanding 2D Ni/Co vertical heterostructures with strong interfacial coupling for efficient oxygen evolution reaction
Designing vertical heterostructures from 2D ultrathin nanosheets provides an effective pathway to improve energy conversion performance by maximizing the density of accessible catalytic sites, enabling efficient interfacial charge migration, and inducing favorable electronic band alignment. Such electronic and structural modifications collectively regulate the adsorption energies of key intermediates, thereby reducing the energy barriers governing the oxygen evolution reaction (OER). Achieving anisotropic crystal growth by disrupting lattice symmetry remains a key challenge for non-layered systems. For transition metal hydroxides, it is crucial to tackle issues such as disordered stacking, synthesis complexity, structural fragility, and insufficient interfacial integration. Herein, we synthesized ultrathin 2D Nickel/Cobalt hydroxide vertical heterostructures through a wet-chemical synthesis approach. The obtained free-standing vertical heterostructures was subsequently utilized as an active electrocatalyst for OER. The electrocatalyst delivered an overpotential (η) of 364 mV (vs. RHE) at 10 mA cm-2, along with a Tafel slope of 70 mV dec-1, reflecting efficient reaction kinetics. The DFT analysis indicates that interfacial interaction between the layers is the key parameter for OER activity. This combined experimental and theoretical work demonstrates an effective approach to design 2D heterointerface-based electrocatalysts with enhanced performance and maximized material.
- 18 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (19) , 14104-14117
High-Performance All-Pseudocapacitive Asymmetric Supercapacitor Device Based on a Spinel Co3O4/MWCNT Nanocomposite with Theoretical Insights
- 18 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (19) , 14104-14117
High-Performance All-Pseudocapacitive Asymmetric Supercapacitor Device Based on a Spinel Co3O4/MWCNT Nanocomposite with Theoretical Insights
- 9 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (16) , e202500850
Ultrathin 2D Ni/Co Hydroxide Heterostructures for High Energy Density Flexible Microsupercapacitor
Assembling 2D ultrathin nanosheets into vertical heterostructures offers significant potential for advanced energy storage due to enhanced active sites, improved ion diffusion, and increased electrical conductivity, leading to superior ion/electron transport, higher energy density, and improved rate performance. In case of transition‐metal hydroxides, to overcome with challenges such as random assembly, complex synthesis, instability, and poor interfacial contact is critical. This study synthesizes large area, ultrathin, 2D Nickel/Cobalt hydroxide vertical heterostructures (nickel as the top layer) using a wet chemical process, achieving 32% higher areal charge storage compared to cobalt/nickel hydroxide vertical heterostructures, 57% higher than Ni(OH) 2 and 330% higher than individual Co(OH) 2 . The synergistic interaction between nickel and cobalt hydroxides contributes to a high volumetric capacity (710 mAh cm −3 ) and energy density (285 mAh cm −3 ) in symmetric devices. The flexible microsupercapacitor retains 75% capacitance after 15,000 cycles and demonstrates stability under bending up to 135°, with a volumetric capacity of 393 mAh cm −3 . Density functional theory simulations complement experiments, revealing interaction energy and electronic state redistribution near the Fermi level. This integrated approach serves as a guide for enhancing electrochemical properties in 2D heterostructures, aiding in the development of next‐generation, high‐performance energy storage materials.
- 9 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (16) , e202500850
Ultrathin 2D Ni/Co Hydroxide Heterostructures for High Energy Density Flexible Microsupercapacitor
Assembling 2D ultrathin nanosheets into vertical heterostructures offers significant potential for advanced energy storage due to enhanced active sites, improved ion diffusion, and increased electrical conductivity, leading to superior ion/electron transport, higher energy density, and improved rate performance. In case of transition‐metal hydroxides, to overcome with challenges such as random assembly, complex synthesis, instability, and poor interfacial contact is critical. This study synthesizes large area, ultrathin, 2D Nickel/Cobalt hydroxide vertical heterostructures (nickel as the top layer) using a wet chemical process, achieving 32% higher areal charge storage compared to cobalt/nickel hydroxide vertical heterostructures, 57% higher than Ni(OH) 2 and 330% higher than individual Co(OH) 2 . The synergistic interaction between nickel and cobalt hydroxides contributes to a high volumetric capacity (710 mAh cm −3 ) and energy density (285 mAh cm −3 ) in symmetric devices. The flexible microsupercapacitor retains 75% capacitance after 15,000 cycles and demonstrates stability under bending up to 135°, with a volumetric capacity of 393 mAh cm −3 . Density functional theory simulations complement experiments, revealing interaction energy and electronic state redistribution near the Fermi level. This integrated approach serves as a guide for enhancing electrochemical properties in 2D heterostructures, aiding in the development of next‐generation, high‐performance energy storage materials.
- 5 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (12) , 5516-5525
Engineering Ultrathin Co(OH)2 Nanosheets for High-Performance All-Solid-State Flexible Transparent Supercapacitors
- 5 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (12) , 5516-5525
Engineering Ultrathin Co(OH)2 Nanosheets for High-Performance All-Solid-State Flexible Transparent Supercapacitors
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (21) , 15782-15797
Structural engineering of bimetallic NiMoO4 for high-performance supercapacitors and efficient oxygen evolution reaction catalysts
Advancing energy storage and conversion research on 2D nanostructures hinges on the critical development of bifunctional electrodes capable of effectively catalyzing oxygen evolution reactions and facilitating charge storage applications. Although metal oxide materials have been shown to be promising electrode materials for energy storage and conversion, an easy and reliable synthesis strategy for achieving a 2D morphology to fully utilize their electrochemical potential has not yet been achieved. Herein, we report the synthesis of NiMoO4 self-assembled, ultrathin nanosheets through ionic layer epitaxy with precise control over the Ni : Mo composition ratio. X-ray absorption spectroscopy reveals a uniform radial distance shift in NiMoO4, indicating the homogeneous distribution of Ni and Mo in equal proportions. The optimized 1 : 1 NiMoO4 nanosheet device exhibits a high areal capacitance of 4.93 mF cm−2 with promising stability (20 000 cycles). Furthermore, the OER activity of ultrathin 1 : 1 NiMoO4 exhibits an overpotential (η10) of 318 mV and a Tafel value of 51 mV dec−1, suggesting fast reaction kinetics. This investigation reveals a promising possibility for developing high-performance electrode materials using 2D metal oxides, thereby achieving high material efficiency.
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (21) , 15782-15797
Structural engineering of bimetallic NiMoO4 for high-performance supercapacitors and efficient oxygen evolution reaction catalysts
Advancing energy storage and conversion research on 2D nanostructures hinges on the critical development of bifunctional electrodes capable of effectively catalyzing oxygen evolution reactions and facilitating charge storage applications. Although metal oxide materials have been shown to be promising electrode materials for energy storage and conversion, an easy and reliable synthesis strategy for achieving a 2D morphology to fully utilize their electrochemical potential has not yet been achieved. Herein, we report the synthesis of NiMoO4 self-assembled, ultrathin nanosheets through ionic layer epitaxy with precise control over the Ni : Mo composition ratio. X-ray absorption spectroscopy reveals a uniform radial distance shift in NiMoO4, indicating the homogeneous distribution of Ni and Mo in equal proportions. The optimized 1 : 1 NiMoO4 nanosheet device exhibits a high areal capacitance of 4.93 mF cm−2 with promising stability (20 000 cycles). Furthermore, the OER activity of ultrathin 1 : 1 NiMoO4 exhibits an overpotential (η10) of 318 mV and a Tafel value of 51 mV dec−1, suggesting fast reaction kinetics. This investigation reveals a promising possibility for developing high-performance electrode materials using 2D metal oxides, thereby achieving high material efficiency.