Qianqian Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qianqian Cao has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
Lujuan Li
15 shared publications- Chuncheng Zuo
College of Mechanical and Electrical Engineering, Jiaxing University, Jiaxing 314000, China
5 shared publications Chuncheng Zuo
4 shared publicationsHongli Chen
4 shared publicationsYong Lyu
4 shared publicationsZhiqing Gu
4 shared publications
Latest Publications
- Open Access
- 13 April 2026
- Published by Elsevier in SSRN Electronic Journal
Transport and Evaporation of Droplets Induced under Coupling of Thermal Gradient and Electric Field
This study employs molecular dynamics simulations to investigate the thermophoretic transport and evaporation characteristics of water nanodroplets on a graphene substrate under the coupled effects of thermal gradient and electric field. The results demonstrate that the thermal gradient drives droplets to migrate toward the low-temperature heat sink, and higher heat-source temperatures accelerate the droplet velocity and enhance water evaporation. External electric fields can regulate droplet transport and evaporation behaviors by altering droplet morphology and interfacial interactions. Specifically, in-plane fields induce the elongation of the droplet on the graphene surface and increase their contact area, which promotes thermophoretic transport but also influences evaporation; while a perpendicular field can reduce contact area and weaken thermophoretic driving forces. It was found that weak in-plane fields enhance evaporation, while strong fields suppress it by inducing ordered arrangements of water molecules. Additionally, the electric field induces molecular ordering, reflected in increased dipole moments and altered hydrogen-bonding structures, while high temperatures disrupt water molecule arrangement. This work reveals coupled controlling mechanisms of thermal and electric fields for nanodroplet transport and evaporation on two-dimensional materials, providing insights for precise nanofluidic manipulation in thermal and microfluidic applications.
- 13 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTransport and Evaporation of Droplets Induced under Coupling of Thermal Gradient and Electric Field
This study employs molecular dynamics simulations to investigate the thermophoretic transport and evaporation characteristics of water nanodroplets on a graphene substrate under the coupled effects of thermal gradient and electric field. The results demonstrate that the thermal gradient drives droplets to migrate toward the low-temperature heat sink, and higher heat-source temperatures accelerate the droplet velocity and enhance water evaporation. External electric fields can regulate droplet transport and evaporation behaviors by altering droplet morphology and interfacial interactions. Specifically, in-plane fields induce the elongation of the droplet on the graphene surface and increase their contact area, which promotes thermophoretic transport but also influences evaporation; while a perpendicular field can reduce contact area and weaken thermophoretic driving forces. It was found that weak in-plane fields enhance evaporation, while strong fields suppress it by inducing ordered arrangements of water molecules. Additionally, the electric field induces molecular ordering, reflected in increased dipole moments and altered hydrogen-bonding structures, while high temperatures disrupt water molecule arrangement. This work reveals coupled controlling mechanisms of thermal and electric fields for nanodroplet transport and evaporation on two-dimensional materials, providing insights for precise nanofluidic manipulation in thermal and microfluidic applications.
- 27 December 2025
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 223
Thermophoretic transport of graphene nanoflakes on carbon nanotubes
- 27 December 2025
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 223
Thermophoretic transport of graphene nanoflakes on carbon nanotubes
- 4 February 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (6) , 3812-3821
Mechanical Properties and Fracture Mechanisms of Nanocomposites of Metal and Graphene with Overlapping Edges
The fracture mechanism and mechanical response of Ni/graphene nanocomposites under nanoindentation are investigated by molecular dynamics simulations. We analyze the effect of the overlapping area on the microstructural transition, HCP atomic fraction, dislocation density, load-displacement relationship, and stress distribution. It was found that the maximum indentation depth of embedded graphene has a nonlinear dependence relation with the overlapping area, and it becomes smaller at the overlapping width comparable to the indenter diameter. The graphene layer is able to hinder the expansion of the dislocation into the interior of the Ni matrix in the initial stage. The densities of HCP atoms and dislocations in the composite gradually increase with increasing indentation depth. The stress concentration tends to cause nucleation of dislocations below the indentation surface. When the graphene is ruptured, the elastic recovery to some extent occurs in the deformed substrate. This work sheds light on modifying the mechanical properties of metal/graphene composites by tuning the overlapping boundary of graphene.
- 4 February 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (6) , 3812-3821
Mechanical Properties and Fracture Mechanisms of Nanocomposites of Metal and Graphene with Overlapping Edges
The fracture mechanism and mechanical response of Ni/graphene nanocomposites under nanoindentation are investigated by molecular dynamics simulations. We analyze the effect of the overlapping area on the microstructural transition, HCP atomic fraction, dislocation density, load-displacement relationship, and stress distribution. It was found that the maximum indentation depth of embedded graphene has a nonlinear dependence relation with the overlapping area, and it becomes smaller at the overlapping width comparable to the indenter diameter. The graphene layer is able to hinder the expansion of the dislocation into the interior of the Ni matrix in the initial stage. The densities of HCP atoms and dislocations in the composite gradually increase with increasing indentation depth. The stress concentration tends to cause nucleation of dislocations below the indentation surface. When the graphene is ruptured, the elastic recovery to some extent occurs in the deformed substrate. This work sheds light on modifying the mechanical properties of metal/graphene composites by tuning the overlapping boundary of graphene.
- Open Access
- 15 December 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (12) , 1497
High-Efficiency Precision Polishing Using Fiber Brush–Shear-Thickening Fluid Composites
Shear-thickening fluid (STF) is widely applied in various practical engineering fields due to its rheological properties of increased viscosity under load. We investigated the integration of STF with fiber brushes to prepare a novel composite material for polishing applications. The impact of composite material properties is studied in surface finish, specifically roughness and morphology, across flat and uneven surfaces. The effects of the critical variables, including polishing speed, feed depth, and STF concentration, are analyzed through experimentation and simulation. After the STF polishing, the surface roughness of the aluminum alloy sample decreases from 3.125 μm to 0.528 μm, which increases the processing efficiency by 40% compared to Newton polishing slurry. The unique shear-thickening performance of the composite material ensures excellent surface quality and high efficiency in the precision machining of workpieces.
- 15 December 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (12) , 1497
Open AccessHigh-Efficiency Precision Polishing Using Fiber Brush–Shear-Thickening Fluid Composites
Shear-thickening fluid (STF) is widely applied in various practical engineering fields due to its rheological properties of increased viscosity under load. We investigated the integration of STF with fiber brushes to prepare a novel composite material for polishing applications. The impact of composite material properties is studied in surface finish, specifically roughness and morphology, across flat and uneven surfaces. The effects of the critical variables, including polishing speed, feed depth, and STF concentration, are analyzed through experimentation and simulation. After the STF polishing, the surface roughness of the aluminum alloy sample decreases from 3.125 μm to 0.528 μm, which increases the processing efficiency by 40% compared to Newton polishing slurry. The unique shear-thickening performance of the composite material ensures excellent surface quality and high efficiency in the precision machining of workpieces.
- 10 November 2024
- Published by Elsevier in Materials Today Communications
- Vol. 41
A molecular dynamics study on microscopic mechanism of nano-polished single crystal copper
- 10 November 2024
- Published by Elsevier in Materials Today Communications
- Vol. 41
A molecular dynamics study on microscopic mechanism of nano-polished single crystal copper
- Open Access
- 25 October 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (11) , 1300
A Normal Displacement Model and Compensation Method of Polishing Tool for Precision CNC Polishing of Aspheric Surface
The position accuracy of the polishing tool affects the surface quality of the polished aspheric surface. The contact deformation among the polishing tool, abrasives, and aspheric part can cause a displacement, which, in turn, will cause a position error of the polishing tool, which will lead to a significant change in the polishing force. In order to resolve this error, this paper proposed a method of normal displacement compensation for a computer numerical controlled (CNC) polishing system by controlling the polishing force. Firstly, the coupling principle between the polishing force and the position of the polishing tool is expounded, and the relationship between normal displacement and deformation is analyzed. Based on Hertz’s theory, a model of normal displacement is established. Then, on the basis of the decoupled polishing system developed, a normal displacement compensation method was proposed. Finally, a group of comparative experiments was carried out to verify the effectiveness of the proposed method. Compared with no displacement compensation, when the part was polished with the normal displacement compensation method, the value of roughness decreased from 0.4 µm to 0.21 µm, and the unevenness coefficient of surface roughness decreased from 112.5% to 19%. The experimental results show that the polishing quality is improved greatly, and the aspheric surfaces can be polished more uniformly with the method proposed in this paper.
- 25 October 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (11) , 1300
Open AccessA Normal Displacement Model and Compensation Method of Polishing Tool for Precision CNC Polishing of Aspheric Surface
The position accuracy of the polishing tool affects the surface quality of the polished aspheric surface. The contact deformation among the polishing tool, abrasives, and aspheric part can cause a displacement, which, in turn, will cause a position error of the polishing tool, which will lead to a significant change in the polishing force. In order to resolve this error, this paper proposed a method of normal displacement compensation for a computer numerical controlled (CNC) polishing system by controlling the polishing force. Firstly, the coupling principle between the polishing force and the position of the polishing tool is expounded, and the relationship between normal displacement and deformation is analyzed. Based on Hertz’s theory, a model of normal displacement is established. Then, on the basis of the decoupled polishing system developed, a normal displacement compensation method was proposed. Finally, a group of comparative experiments was carried out to verify the effectiveness of the proposed method. Compared with no displacement compensation, when the part was polished with the normal displacement compensation method, the value of roughness decreased from 0.4 µm to 0.21 µm, and the unevenness coefficient of surface roughness decreased from 112.5% to 19%. The experimental results show that the polishing quality is improved greatly, and the aspheric surfaces can be polished more uniformly with the method proposed in this paper.
- Open Access
- 30 September 2024
- Published by MDPI AG in Preprints.org
A Normal Displacement Model and Compensation Method of Polishing Tool for Precision NC Polishing of Aspheric Surface
The position accuracy of polishing tool affects the surface quality of the polished aspheric surface. The contact deformation among the polishing tool, abrasives and aspheric part can cause a displacement, in turn will cause a position error of polishing tool, this will lead to a significant change of the polishing force. In order to resolve this error, this paper proposed a method of normal displacement compensation for NC polishing system by controlling the polishing force. Firstly, the coupling principle between polishing force and position of polishing tool are expounded, the relationship between normal displacement and deformation is analyzed, based on Hertz theory, a model of normal displacement is established. Then, on the basis of decoupled polishing system developed, a normal displacement compensation method was proposed. Finally, a group of comparative experiments was carried out to verify the effectiveness of the proposed method. Compared with no displacement compensation, when the part was polished with normal displacement compensation method, the value of roughness decreases from 0.4µm to 0.21µm, and the unevenness coefficients of surface roughness decreases from 112.5% to 19%. The experimental results show that the polishing quality is improved greatly and the aspheric surfaces can be polished more uniformly with method proposed in this paper.
- 30 September 2024
- Published by MDPI AG in Preprints.org
Open AccessA Normal Displacement Model and Compensation Method of Polishing Tool for Precision NC Polishing of Aspheric Surface
The position accuracy of polishing tool affects the surface quality of the polished aspheric surface. The contact deformation among the polishing tool, abrasives and aspheric part can cause a displacement, in turn will cause a position error of polishing tool, this will lead to a significant change of the polishing force. In order to resolve this error, this paper proposed a method of normal displacement compensation for NC polishing system by controlling the polishing force. Firstly, the coupling principle between polishing force and position of polishing tool are expounded, the relationship between normal displacement and deformation is analyzed, based on Hertz theory, a model of normal displacement is established. Then, on the basis of decoupled polishing system developed, a normal displacement compensation method was proposed. Finally, a group of comparative experiments was carried out to verify the effectiveness of the proposed method. Compared with no displacement compensation, when the part was polished with normal displacement compensation method, the value of roughness decreases from 0.4µm to 0.21µm, and the unevenness coefficients of surface roughness decreases from 112.5% to 19%. The experimental results show that the polishing quality is improved greatly and the aspheric surfaces can be polished more uniformly with method proposed in this paper.