Clifford I. Voss
Research Subjects
Research Interests
Clifford I. Voss has a total of 106 co-authors. Here are the top co-authors by number of shared publications:
- Burke J. Minsley
U.S. Geological Survey Geology, Geophysics, and Geochemistry Science Center Denver CO USA
3 shared publications - Michelle Ann Walvoord
US Geological Survey Earth System Processes Division Denver CO USA
3 shared publications - Alden M. Provost
U.S. Geological Survey Integrated Modeling and Prediction Division Reston Virginia
2 shared publications - Brian A. Ebel
U.S. Geological Survey Water Resources Mission Area Burlington VT USA
2 shared publications - Daniel Fortier
Centre d'études nordiques Université Laval Québec Canada
2 shared publications - Jeffrey M. McKenzie
Department of Earth and Planetary Science – McGill University, Montreal, Quebec, Canada
2 shared publications
Latest Publications
- Open Access
- 29 January 2025
- Published by Springer Nature in Hydrogeology Journal
- Vol. 33 (1) , 1-2
Editor’s Message: Transitions in Hydrogeology Journal leadership
- 29 January 2025
- Published by Springer Nature in Hydrogeology Journal
- Vol. 33 (1) , 1-2
Open AccessEditor’s Message: Transitions in Hydrogeology Journal leadership
- Open Access
- 19 February 2024
- Published by Springer Nature in Hydrogeology Journal
- Vol. 32 (2) , 339-340
Editor’s Message: The 2023 Editors’ Choice articles
- 19 February 2024
- Published by Springer Nature in Hydrogeology Journal
- Vol. 32 (2) , 339-340
Open AccessEditor’s Message: The 2023 Editors’ Choice articles
- Open Access
- 1 January 2024
- Published by US Geological Survey
SUTRA— A code for simulation of saturated-unsaturated, variable-density groundwater flow with solute or energy transport—Documentation of the version 4.0 enhancements—Freeze-thaw capability, saturation and relative-permeability relations, spatially varying properties, and enhanced budget and velocity outputs
Version 4.0 of the Saturated-Unsaturated Transport (SUTRA) software code provides the capability to simulate the freezing and thawing of groundwater during energy transport simulations under saturated and unsaturated conditions. In addition to the types of hydrogeologic processes that SUTRA has been able to simulate in the past, this version can be used to study the effects of the freeze-thaw process on the flow and energy dynamics of hydrogeologic systems. The freeze-thaw simulation capability accounts for the latent heat of fusion and allows thermal property values to vary with changing total-water saturation, liquid-water saturation, and ice saturation. It allows the effective permeability of the porous medium to change as a result of freezing and thawing. This version also provides several user-selectable relations for the dependence of total-water saturation on fluid pressure, the dependence of liquid-water saturation on temperature during freezing and thawing, and the dependence of relative permeability on liquid saturation, as well as three user-selectable formulae for defining the bulk thermal conductivity of a mixture of solid grains, liquid water, ice, and air. For unsaturated simulations without freezing, the selectable total-water saturation relations eliminate the need for the user to program these and their associated relative-permeability functions, as had been required in previous SUTRA versions. Optional nonlinear dependence of fluid density on temperature, which covers the range from supercooled (about −50 degrees Celsius) to superheated (about 400 degrees Celsius), is also provided.Additionally, this version makes it possible to spatially vary parameters that, in previous versions of SUTRA, were required to be spatially uniform: solid-matrix properties, adsorption parameters, and parameters for production of solute mass or energy. Spatial variation is also allowed for the newly included freeze-thaw process parameters. Additional enhancements provide (1) output of water-mass and energy budgets that include values of all component terms in the governing balance equations, and (2) output of Darcy velocities (fluid fluxes), in addition to the velocity output provided by previous SUTRA versions. These enhanced outputs allow fuller interpretation of simulation results, especially for freeze-thaw phenomena.The set of processes simulated by this version of SUTRA are useful for studying a wide range of hydrogeologic system types, conditions, and questions. For cryohydrogeologic simulations, however, this version of the code is limited in that (1) it does not simulate thermomechanical effects of freeze-thaw, (2) pressure changes due to water density change during freezing are neglected, (3) ice saturation cannot exceed the initial porosity of the simulated medium, and (4) cryosuction, the migration of liquid water toward freezing fronts, is neglected. Furthermore, this version does not account for air flow or for water vaporization and sublimation under unsaturated conditions.
- 1 January 2024
- Published by US Geological Survey
Open AccessSUTRA— A code for simulation of saturated-unsaturated, variable-density groundwater flow with solute or energy transport—Documentation of the version 4.0 enhancements—Freeze-thaw capability, saturation and relative-permeability relations, spatially varying properties, and enhanced budget and velocity outputs
Version 4.0 of the Saturated-Unsaturated Transport (SUTRA) software code provides the capability to simulate the freezing and thawing of groundwater during energy transport simulations under saturated and unsaturated conditions. In addition to the types of hydrogeologic processes that SUTRA has been able to simulate in the past, this version can be used to study the effects of the freeze-thaw process on the flow and energy dynamics of hydrogeologic systems. The freeze-thaw simulation capability accounts for the latent heat of fusion and allows thermal property values to vary with changing total-water saturation, liquid-water saturation, and ice saturation. It allows the effective permeability of the porous medium to change as a result of freezing and thawing. This version also provides several user-selectable relations for the dependence of total-water saturation on fluid pressure, the dependence of liquid-water saturation on temperature during freezing and thawing, and the dependence of relative permeability on liquid saturation, as well as three user-selectable formulae for defining the bulk thermal conductivity of a mixture of solid grains, liquid water, ice, and air. For unsaturated simulations without freezing, the selectable total-water saturation relations eliminate the need for the user to program these and their associated relative-permeability functions, as had been required in previous SUTRA versions. Optional nonlinear dependence of fluid density on temperature, which covers the range from supercooled (about −50 degrees Celsius) to superheated (about 400 degrees Celsius), is also provided.Additionally, this version makes it possible to spatially vary parameters that, in previous versions of SUTRA, were required to be spatially uniform: solid-matrix properties, adsorption parameters, and parameters for production of solute mass or energy. Spatial variation is also allowed for the newly included freeze-thaw process parameters. Additional enhancements provide (1) output of water-mass and energy budgets that include values of all component terms in the governing balance equations, and (2) output of Darcy velocities (fluid fluxes), in addition to the velocity output provided by previous SUTRA versions. These enhanced outputs allow fuller interpretation of simulation results, especially for freeze-thaw phenomena.The set of processes simulated by this version of SUTRA are useful for studying a wide range of hydrogeologic system types, conditions, and questions. For cryohydrogeologic simulations, however, this version of the code is limited in that (1) it does not simulate thermomechanical effects of freeze-thaw, (2) pressure changes due to water density change during freezing are neglected, (3) ice saturation cannot exceed the initial porosity of the simulated medium, and (4) cryosuction, the migration of liquid water toward freezing fronts, is neglected. Furthermore, this version does not account for air flow or for water vaporization and sublimation under unsaturated conditions.
- Open Access
- 13 April 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (4)
Subsurface Porewater Flow Accelerates Talik Development Under the Alaska Highway, Yukon: A Prelude to Road Collapse and Final Permafrost Thaw?
The presence of taliks (perennially unfrozen zones in permafrost areas) adversely affects the thermal stability of infrastructure in cold regions, including roads. The role of heat advection on talik development and feedback on permafrost degradation has not been quantified methodically in this context. We incorporate a surface energy balance model into a coupled groundwater flow and energy transport numerical model (SUTRA‐ice). The model, calibrated with long‐term observations (1997–2018 on the Alaska Highway), is used to investigate and quantify the role of heat advection on talik initiation and development under a road embankment. Over the 25‐year simulation period, the new model is driven by reconstructed meteorological data and has a good agreement with near surface soil temperatures. The model successfully reproduces the increasing depth to the permafrost table (mean absolute error <0.2 m), and talik development. The results demonstrate that heat advection provides an additional energy source that expedites the rate of permafrost thaw and roughly doubles the rate of permafrost table deepening, compared to purely conductive thawing. Talik initially formed and grew over time under the combined effect of water flow, snow insulation, road construction and climate warming. Talik formation creates a new thermal state under the road embankment, resulting in acceleration of underlying permafrost degradation, due to the positive feedback of heat accumulation created by trapped unfrozen water. In a changing climate, mobile water flow will play a more important role in permafrost thaw and talik development under road embankments, and is likely to significantly increase maintenance costs and reduce the long‐term stability of the infrastructure.
- 13 April 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (4)
Open AccessSubsurface Porewater Flow Accelerates Talik Development Under the Alaska Highway, Yukon: A Prelude to Road Collapse and Final Permafrost Thaw?
The presence of taliks (perennially unfrozen zones in permafrost areas) adversely affects the thermal stability of infrastructure in cold regions, including roads. The role of heat advection on talik development and feedback on permafrost degradation has not been quantified methodically in this context. We incorporate a surface energy balance model into a coupled groundwater flow and energy transport numerical model (SUTRA‐ice). The model, calibrated with long‐term observations (1997–2018 on the Alaska Highway), is used to investigate and quantify the role of heat advection on talik initiation and development under a road embankment. Over the 25‐year simulation period, the new model is driven by reconstructed meteorological data and has a good agreement with near surface soil temperatures. The model successfully reproduces the increasing depth to the permafrost table (mean absolute error <0.2 m), and talik development. The results demonstrate that heat advection provides an additional energy source that expedites the rate of permafrost thaw and roughly doubles the rate of permafrost table deepening, compared to purely conductive thawing. Talik initially formed and grew over time under the combined effect of water flow, snow insulation, road construction and climate warming. Talik formation creates a new thermal state under the road embankment, resulting in acceleration of underlying permafrost degradation, due to the positive feedback of heat accumulation created by trapped unfrozen water. In a changing climate, mobile water flow will play a more important role in permafrost thaw and talik development under road embankments, and is likely to significantly increase maintenance costs and reduce the long‐term stability of the infrastructure.
- Open Access
- 6 March 2023
- Published by Springer Nature in Hydrogeology Journal
- Vol. 31 (2) , 191-193
Editor’s Message: The 2022 Editors’ Choice articles
- 6 March 2023
- Published by Springer Nature in Hydrogeology Journal
- Vol. 31 (2) , 191-193
Open AccessEditor’s Message: The 2022 Editors’ Choice articles
- 15 August 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (8)
Effect of Flow‐Direction‐Dependent Dispersivity on Seawater Intrusion in Coastal Aquifers
Flow‐direction‐dependent (FDD) dispersivity in coastal aquifers (CAs) may strongly affect the inland extend of seawater intrusion (SWI) and the accompanying vertical salinity distribution. FDD dispersivity may predict greater inland intrusion of the saltwater wedge, but less vertical spreading of salinity than does the classical flow‐direction‐independent (FDI) dispersivity, the standard currently employed in most numerical CA models. Dispersion processes play a key role in the SWI process and directly affect CA pumped water quality. Constant FDI dispersivities may be inappropriate in representing mixing processes due to large differences between depth and horizontal salinity transport scales, and due to typical structured heterogeneities in aquifer fabrics. Comparison of FDI and FDD model forecasts for the classical Henry problem (HP) steady‐state SWI, based on a new HP semianalytical solution with FDD and on a numerical FDI model modified to additionally represent FDD, highlights the theoretical types of differences implied by these alternative dispersivity assumptions and exactly how each parameter affects the solution. Large differences between FDI and FDD dispersivity forecasts of time‐dependent SWI in large scale heterogeneous aquifers occur in a typical CA (Akkar CA, Lebanon). The FDD model forecasts that future salinities in pumping wells will exceed the potable water limit, whereas the FDI model greatly underestimates the historic inland intrusion of the saltwater wedge and forecasts no impact on future Akkar CA potable water supply. These results indicate the importance of employing the appropriate dispersion process representation when creating model‐based SWI forecasts, especially for developing effective CA management strategies.
- 15 August 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (8)
Effect of Flow‐Direction‐Dependent Dispersivity on Seawater Intrusion in Coastal Aquifers
Flow‐direction‐dependent (FDD) dispersivity in coastal aquifers (CAs) may strongly affect the inland extend of seawater intrusion (SWI) and the accompanying vertical salinity distribution. FDD dispersivity may predict greater inland intrusion of the saltwater wedge, but less vertical spreading of salinity than does the classical flow‐direction‐independent (FDI) dispersivity, the standard currently employed in most numerical CA models. Dispersion processes play a key role in the SWI process and directly affect CA pumped water quality. Constant FDI dispersivities may be inappropriate in representing mixing processes due to large differences between depth and horizontal salinity transport scales, and due to typical structured heterogeneities in aquifer fabrics. Comparison of FDI and FDD model forecasts for the classical Henry problem (HP) steady‐state SWI, based on a new HP semianalytical solution with FDD and on a numerical FDI model modified to additionally represent FDD, highlights the theoretical types of differences implied by these alternative dispersivity assumptions and exactly how each parameter affects the solution. Large differences between FDI and FDD dispersivity forecasts of time‐dependent SWI in large scale heterogeneous aquifers occur in a typical CA (Akkar CA, Lebanon). The FDD model forecasts that future salinities in pumping wells will exceed the potable water limit, whereas the FDI model greatly underestimates the historic inland intrusion of the saltwater wedge and forecasts no impact on future Akkar CA potable water supply. These results indicate the importance of employing the appropriate dispersion process representation when creating model‐based SWI forecasts, especially for developing effective CA management strategies.
- 2 February 2022
- Published by Springer Nature in Hydrogeology Journal
- Vol. 30 (1) , 1-2
Editor’s Message: The 2021 Editors’ Choice articles
- 2 February 2022
- Published by Springer Nature in Hydrogeology Journal
- Vol. 30 (1) , 1-2
Editor’s Message: The 2021 Editors’ Choice articles
- 30 August 2021
- Published by Wiley in Permafrost and Periglacial Processes
- Vol. 32 (4) , 681-701
Surface energy balance of sub‐Arctic roads with varying snow regimes and properties in permafrost regions
Surface energy balance (SEB) strongly influences the thermal state of permafrost, cryohydrological processes, and infrastructure stability. Road construction and snow accumulation affect the energy balance of underlying permafrost. Herein, we use an experimental road section of the Alaska Highway to develop a SEB model to quantify the surface energy components and ground surface temperature (GST) for different land cover types with varying snow regimes and properties. Simulated and measured ground temperatures are in good agreement, and our results show that the quantity of heat entering the embankment center and slope is mainly controlled by net radiation, and less by the sensible heat flux. In spring, lateral heat flux from the embankment center leads to earlier disappearance of snowpack on the embankment slope. In winter, the insulation created by the snow cover on the embankment slope reduces heat loss by a factor of three compared with the embankment center where the snow is plowed. The surface temperature offsets are 5.0°C and 7.8°C for the embankment center and slope, respectively. Furthermore, the heat flux released on the embankment slope exponentially decreases with increasing snow depth, and linearly decreases with earlier snow cover in fall and shorter snow‐covered period in spring.
- 30 August 2021
- Published by Wiley in Permafrost and Periglacial Processes
- Vol. 32 (4) , 681-701
Surface energy balance of sub‐Arctic roads with varying snow regimes and properties in permafrost regions
Surface energy balance (SEB) strongly influences the thermal state of permafrost, cryohydrological processes, and infrastructure stability. Road construction and snow accumulation affect the energy balance of underlying permafrost. Herein, we use an experimental road section of the Alaska Highway to develop a SEB model to quantify the surface energy components and ground surface temperature (GST) for different land cover types with varying snow regimes and properties. Simulated and measured ground temperatures are in good agreement, and our results show that the quantity of heat entering the embankment center and slope is mainly controlled by net radiation, and less by the sensible heat flux. In spring, lateral heat flux from the embankment center leads to earlier disappearance of snowpack on the embankment slope. In winter, the insulation created by the snow cover on the embankment slope reduces heat loss by a factor of three compared with the embankment center where the snow is plowed. The surface temperature offsets are 5.0°C and 7.8°C for the embankment center and slope, respectively. Furthermore, the heat flux released on the embankment slope exponentially decreases with increasing snow depth, and linearly decreases with earlier snow cover in fall and shorter snow‐covered period in spring.
- Open Access
- 1 March 2021
- Published by Elsevier in Advances in Water Resources
- Vol. 149
Simulating water and heat transport with freezing and cryosuction in unsaturated soil: Comparing an empirical, semi-empirical and physically-based approach
- 1 March 2021
- Published by Elsevier in Advances in Water Resources
- Vol. 149
Open AccessSimulating water and heat transport with freezing and cryosuction in unsaturated soil: Comparing an empirical, semi-empirical and physically-based approach
- Open Access
- 7 August 2020
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 47 (15)
Wildfire‐Initiated Talik Development Exceeds Current Thaw Projections: Observations and Models From Alaska's Continuous Permafrost Zone
As the Arctic warms and wildfire occurrence increases, talik formation in permafrost regions is projected to expand and affect the cycling of water and carbon. Yet, few unified field and modeling studies have examined this process in detail, particularly in areas of continuous permafrost. We address this gap by presenting multimethod, multiseasonal geophysical measurements of permafrost and liquid‐water content that reveal substantial talik development in response to recent wildfire in continuous permafrost of boreal Alaska. Results from observation‐based cryohydrogeologic model simulations suggest that predisturbance subsurface conditions are key factors influencing thaw response to fire disturbance and air temperature warming. Our high‐resolution integrated study illustrates enhanced vulnerability of boreal continuous permafrost, with observed talik formation that exceeds coarse‐scale model projections by ~100 years even under the most extreme future emissions scenario. Results raise important scaling questions for representing extreme permafrost thaw phenomena of growing widespread importance in large‐scale predictive models.
- 7 August 2020
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 47 (15)
Open AccessWildfire‐Initiated Talik Development Exceeds Current Thaw Projections: Observations and Models From Alaska's Continuous Permafrost Zone
As the Arctic warms and wildfire occurrence increases, talik formation in permafrost regions is projected to expand and affect the cycling of water and carbon. Yet, few unified field and modeling studies have examined this process in detail, particularly in areas of continuous permafrost. We address this gap by presenting multimethod, multiseasonal geophysical measurements of permafrost and liquid‐water content that reveal substantial talik development in response to recent wildfire in continuous permafrost of boreal Alaska. Results from observation‐based cryohydrogeologic model simulations suggest that predisturbance subsurface conditions are key factors influencing thaw response to fire disturbance and air temperature warming. Our high‐resolution integrated study illustrates enhanced vulnerability of boreal continuous permafrost, with observed talik formation that exceeds coarse‐scale model projections by ~100 years even under the most extreme future emissions scenario. Results raise important scaling questions for representing extreme permafrost thaw phenomena of growing widespread importance in large‐scale predictive models.