YWYue Wang

Yue Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yue Wang has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • GaN-on-Si HEMT for D-Band Power Amplification Demonstrating 0.67 W/mm at 10 V

    by Hanchao Li, Qingyun Xie, Zhongzhiguang Lu, Hanlin Xie, Yihao Zhuang, Siyu Liu, Yuxuan Wang, Yue Wang, Kumud Ranjan, Xiao Gong, et al.

    This Letter reports power amplification by a GaN-on-Si high electron mobility transistor (HEMT) in D-band. An AlN/GaN/AlGaN-on-Si metal-insulator-semiconductor (MIS)-HEMT with ${L}_{g}=140$ nm achieved ${I}_{\textit {dmax}}=2.0$ A/mm, ${g}_{\textit {mmax}}=0.65$ S/mm, and ${f}_{T}$ / ${f}_{\textit {max}}=112$ / 205 GHz. Load-pull at 123 GHz (continuous wave, CW) demonstrated a maximum output power ( ${P}_{\textit {out}}\text {)}$ of 0.67 W/mm at a quiescent drain bias ( ${V}_{\textit {ds}}\text {)}$ of 10 V. The peak power-added efficiency (PAE) of 5.3 % was achieved at ${P}_{\textit {out}}$ of 0.36 W/mm ( ${V}_{\textit {ds}}=5$ V). To the best of the authors’ knowledge, this demonstration marks the highest frequency (and the first-time reaching D-band) in power amplification among published GaN-on-Si HEMTs, therefore revealing the promising potential of GaN-on-Si electronics for sub-THz 6G communication.


  • AlN/GaN/AlGaN-on-Si HEMT Achieving 1.3 W/mm at 5 V for 5G FR2 Handsets

    by Hanchao Li, Hanlin Xie, Qingyun Xie, Siyu Liu, Yue Wang, Yuxuan Wang, Kumud Ranjan, Yihao Zhuang, Xiao Gong, Geok Ing Ng

    This Letter reports a double heterostructure (DH) AlN/GaN/AlGaN-on-Si HEMT, which has been proposed, for low voltage (LV, ≤5 V) RF operation. The proposed transistor shows excellent DC ( Idmax =1.9 A/mm, gmmax =0.66 S/mm) and RF small-signal characteristics ( fT/fmax =145/195 GHz). Continuous-wave (CW) load-pull measurements at 30 GHz yield Psat of 0.6 (1.3) W/mm at Vds of 3.5 (5) V, and peak power-added efficiency (PAE) of 43% (42%). To the best of the authors’ knowledge, the Psat values are the highest reported for LV GaN-on-Si HEMTs in 5G FR2, despite the use of conventional alloyed contacts and a gate length ( Lg ) of 120 nm. Furthermore, among published LV GaN-on-Si HEMTs, the proposed transistor achieves a desired combination of saturation velocity ( vsat ) and knee voltage ( Vknee ), which are critical factors for LV power amplification. The results reflect the promising potential of the proposed heterostructure to achieve high transmit power in 5G FR2 handsets.


  • Variable range hopping-assisted parasitic channel leakage in AlN/GaN/AlGaN HEMTs on Si

    by Siyu Liu, Yihao Zhuang, Hanchao Li, Qingyun Xie, Yue Wang, Hanlin Xie, Kumud Ranjan, Geok Ing Ng

    This work investigates the off-state leakage characteristics of AlN/GaN/AlGaN high electron mobility transistors (HEMTs) on Si substrate with varying mesa depths and uncovers the existence of a parasitic channel associated with the AlGaN back barrier. Significant differences in off-state leakage up to three orders of magnitude were observed between devices fabricated using different mesa depths. The electrical properties of AlN/GaN/AlGaN HEMTs were measured, and it was found that there is a N-type parasitic channel in the unintentionally doped AlGaN back-barrier. Analysis of the isolation test structure, which retains this parasitic channel, reveals a buffer leakage of 12.8 mA/mm and a sheet resistance of 7739.1 Ω/sq, as a result of the parasitic channel. The depletion electric field strength of the parasitic channel is 3.2 × 105 V/cm. Temperature-dependent I–V curves obtained from the isolation area affirm that the primary leakage mechanism is two-dimensional variable range hopping along the sidewall. As the isolation distance extends from 3 to 5 μm, the slope of the fitting line decreases from −53.14 to −126.11 due to increased resistance.


  • CMOS-Compatible Ti/TiN/Al Refractory Ohmic Contact for GaAs Heterojunction Bipolar Transistors Grown on Ge/Si Substrate

    by Yue Wang, Wan Khai Loke, Yu Gao, Kwang Hong Lee, Kenneth Eng Kian Lee, Chee Lip Gan, Chuan Seng Tan, Eugene A. Fitzgerald, Soon Fatt Yoon

    In this article, we demonstrate the Ti/TiN/Al (15/50/50 nm) ohmic contact on InGaP/GaAs heterojunction bipolar transistors (HBTs) epitaxially grown on 200-mm Si substrate. We study the rapid thermal annealing (RTA) effect of the metal stack on both n-type InGaAs and p-type GaAs. The dc characteristics of the HBT devices fabricated using the Ti/TiN/Al metal contacts have been analyzed. Contact resistances ${(}{R}_{c}{)} < 0.1~\Omega \cdot $ mm for n-InGaAs and $0.8~\Omega \cdot $ mm for p-GaAs can be achieved. A dc current gain of 45 with a collector–base breakdown voltage (BV cbo ) of 15.65 V is achieved. The ideality factor of the emitter–base current ( ${n}_{b}$ ) and base–collector current ( ${n}_{c}$ ) is 1.03 and 1.44, respectively, after RTA at 450 °C. The dc characteristics remain stable upon prolonged annealing at 450 °C for 45 min. This high thermal budget non-gold ohmic contact is suitable for Si-CMOS integration and enables the potential for hybrid III-V CMOS technology for 5G and mm-wave applications.


  • Effectiveness of InGaAs/GaAs superlattice dislocation filter layers epitaxially grown on 200 mm Si wafers with and without Ge buffers

    by Bing Wang, Govindo Joannesha Syaranamual, Kwang Hong Lee, Shuyu Bao, Yue Wang, Kenneth Eng Kian Lee, Eugene A Fitzgerald, Stephen J Pennycook, Silvija Gradecak, Jurgen Michel

    Low threading dislocation density (TDD) in GaAs epitaxial layers grown on silicon substrate (e.g. TDD < 10 6 cm −2 ) is critical for GaAs-based optoelectronic and high-performance electronic devices on silicon. Ge buffers and In x Ga 1-x As/GaAs superlattice layers (SLs) are commonly used to reduce the TDD in GaAs epitaxial layers grown on Si wafers. In previous reports, TDD of ~10 7 cm −2 in GaAs and InGaP layers grown on 200 mm Si wafers was achieved by using Ge buffers only (e.g. Wang et al 2017 Semicond. Sci. Technol. 32 125013) and TDD of ~10 6 cm −2 in GaAs epi-layers for quantum dot lasers on Si was achieved by using SL insertion layers (e.g. Shang et al 2019 IEEE J. Sel. Top. Quantum Electron. 25 1502207). In this work, the effectiveness of the dislocation filtering effect of In x Ga 1-x As/GaAs SLs combined with Ge buffers is investigated. The results are compared with wafers where In x Ga 1-x As/GaAs SLs were directly grown on GaAs-on-Si buffers without Ge buffers. The In x Ga 1-x As/GaAs dislocation filter layers (DFLs) consisted of 10 nm In x Ga 1-x As/10 nm GaAs layers superlattice spaced by GaAs layer. Then, 1000 nm thick InGaP layers were grown on top of the DFLs to characterize the effect. Transmission electron microscopy, etch-pit density, x-ray diffraction, and photoluminescence were performed to characterize the quality of the materials. Our results indicate that for the growth with Ge buffers there was no significant difference in the final TDDs in the InGaP layers compared with a reference wafer that did not have DFL. For the growth without Ge buffers, the dislocation filtering effect was indeed observed, although it was not as significant as in other reports. For all wafers with DFLs, large wafer bow and dense film cracks appeared, which hinders the practical application of this method.


  • High speed and ultra-low dark current Ge vertical p-i-n photodetectors on an oxygen-annealed Ge-on-insulator platform with GeOx surface passivation

    by Bongkwon Son, Yiding Lin, Kwang Hong Lee, Yue Wang, Shaoteng Wu, Chuan Seng Tan

    Germanium (Ge) vertical p-i-n photodetectors were demonstrated with an ultra-low dark current of 0.57 mA/cm2 at −1 V. A germanium-on-insulator (GOI) platform with a 200-mm wafer scale was realized for photodetector fabrication via direct wafer bonding and layer transfer techniques, followed by oxygen annealing in finance. A thin germanium-oxide (GeOx) layer was formed on the sidewall of photodetectors by ozone oxidation to suppress surface leakage current. The responsivity of the vertical p-i-n annealed GOI photodetectors was revealed to be 0.42 and 0.28 A/W at 1,500 and 1,550 nm at −1 V, respectively. The photodetector characteristics are investigated in comparison with photodetectors with SiO2 surface passivation. The surface leakage current is reduced by a factor of 10 for photodetectors via ozone oxidation. The 3dB bandwidth of 1.72 GHz at −1 V for GeOx surface-passivated photodetectors is enhanced by approximately 2 times compared to the one for SiO2 surface-passivated photodetectors. The 3dB bandwidth is theoretically expected to further enhance to ∼70 GHz with a 5 µm mesa diameter.


  • Open Access

    High-Frequency Characteristics of InGaP/GaAs Double Heterojunction Bipolar Transistor Epitaxially Grown on 200 mm Ge/Si Wafers

    by Loke Wan Khai, Wang Yue, Lee Kwang Hong, Liu Zhihong, Xie Hanlin, Chiah Siau Ben, Kenneth Lee Eng Kian, Zhou Xing, Chuan Seng Tan, Ng Geok Ing, et al.

    N-p-n InGaP/GaAs double heterojunction bipolar transistor has been successfully grown on a 200 mm Ge/Si wafer using metalorganic chemical vapor deposition with low defect density of 10 7 cm -2 . Non-gold metals of Ni/Ge/Al and Ti/Al are used to form the ohmic contact for small pieces device fabrication. Both direct-current (dc) and high-frequency characteristics of the device were measured. The device with emitter area of 6 × 8 μm 2 shows a dc gain of 55 at a collector current of I c = 4 mA, with high collector-emitter breakdown voltage of ~17 V. The high-frequency response with cutoff frequency (fT) of 23 GHz and maximum available frequency (f max ) of 10 GHz can be achieved. These results demonstrate that InGaP/GaAs double heterojunction bipolar transistor grown on low defect density Ge/Si wafer has the potential for realizing III-V CMOS integrated platform for high-frequency applications.


  • Open Access

    In0.49Ga0.51P/GaAs heterojunction bipolar transistors (HBTs) on 200 mm Si substrates: Effects of base thickness, base and sub-collector doping concentrations

    by Yue Wang, Kwang Hong Lee, Wan Khai Loke, Siau Ben Chiah, Xing Zhou, Soon Fatt Yoon, Chuan Seng Tan, Eugene Fitzgerald

    We report performance of InGaP/GaAs heterojunction bipolar transistors (HBTs) fabricated on epitaxial films directly grown onto 200 mm silicon (Si) substrates using a thin 100% germanium (Ge) buffer layer. Both buffer layer and device layers were grown epitaxially using metalorganic chemical vapor deposition (MOCVD). With the assistance of numerical simulation, we were able to achieve high performance GaAs HBTs with DC current gain of ∼100 through optimizing the base doping concentration (C-doped, ∼ 1.9×1019/cm3), base layer thickness (∼55 nm), and the sub-collector doping concentration (Te-doped, > 5×1018/cm3). The breakdown voltage at base (BVceo) of higher than 9.43 V was realized with variation of < 3% across the 200 mm wafer. These results could enable applications such as power amplifiers for mobile phone handsets and monolithic integration of HBTs with standard Si-CMOS transistors on a common Si platform.


  • MOCVD growth of InGaP/GaAs heterojunction bipolar transistors on 200 mm Si wafers for heterogeneous integration with Si CMOS

    by Wan Khai Loke, Kwang Hong Lee, Yue Wang, Chuan Seng Tan, Eugene A Fitzgerald, Soon Fatt Yoon

    Heterojunction bipolar transistors (HBTs) with an In 0.49 Ga 0.51 P emitter and a GaAs base and collector were fabricated on epitaxial films grown directly onto Si substrates using a thin germanium (100%) buffer layer. All the materials (Ge, GaAs, In 0.49 Ga 0.51 P) were grown epitaxially using metal–organic chemical vapor deposition. The thin germanium buffer layer has a threading dislocation density (TDD) of ∼3 × 10 7 cm −2 . The TDD of the active device layers does not worsen and is maintained at ∼2 × 10 7 cm −2 , based on the density of dark spots detected in an electron-beam-induced current plan view image. Although the TDD is high, a DC current gain of 95 can be achieved by the In 0.49 Ga 0.51 P/GaAs HBT on a Si substrate. In addition, collector current and base current ideality factors ( n c and n b ) of 1.07 and 1.23, respectively, and average breakdown voltage ( BV cbo ) of 14.2 V can be realized. These results enable applications such as power amplifiers for mobile phone handsets and monolithic integration of HBTs with standard Si CMOS transistors on a common Si platform.


  • Ultra-Thin GaAs Double-Junction Solar Cell With Carbon-Doped Emitter

    by Zekun Ren, Maung Thway, Zhe Liu, Yue Wang, Cangming Ke, Kevin N. Yaung, Bing Wang, Chuan Seng Tan, Fen Lin, Armin G. Aberle, et al.

    We address the challenge in depositing ultra-thin GaAs cells (<;200 nm) using a more scalable process (metal-organic chemical vapor deposition). We present results for a GaAs/GaAs double-junction solar cell with a 110-nm-thick top cell. Current, voltage, fill factor, and efficiency of this architecture are improved by replacing the zinc doping in the emitter of the top cell with carbon doping. We find that the carbon doping results in a well-defined active junction profile that agrees well with the secondary ion mass spectroscopy measurement. Additionally, we find that the carbon doping coincides with the incorporation of indium in the emitter. We postulate that the incorporation of indium relieves stress in the material, which results in a smoother morphology of the GaAs film. Finally, we show the efficiency achieved with the carbon-doping process is 19.2% for the GaAs/GaAs dual junction cell. The open circuit voltage is 1.087 V for the ultra-thin (110 nm) GaAs top cell and 2.08 V for the dual junction cell.