Andre Carlos Bertolini
Research Subjects
Andre Carlos Bertolini has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
A. C. A. Abreu
PUC-Rio
1 shared publicationA. Emerick
Petrobras
1 shared publicationA. J. Fitzpatrick
Schlumberger
1 shared publication- Bruno Broesigke Holzberg1 shared publication
Célio Maschio
1 shared publicationDenis Jose Schiozer
1 shared publication
Latest Publications
- 10 February 2026
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 260
Modeling fracture initiation pressure and tortuosity along perforations
- 10 February 2026
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 260
Modeling fracture initiation pressure and tortuosity along perforations
- 27 October 2015
- Published by Society of Petroleum Engineers (SPE)
Proactive and Reactive Strategies for Optimal Operational Design: An Application in Smart Wells
The primary objective of this study is to quantify the benefit of utilizing smart-well technology. The approach presented here maximizes the expected net present value (ENPV) of a field development strategy while accounting for uncertainty in reservoir parameters. In particular the dominant objective is to quantify the relative merits of adopting proactive and/or reactive strategies when designing optimal control policies from their impact on asset value. Proactive or reactive control strategies are the methods typically deployed for controlling smart wells in the presence of reservoir uncertainty. In the case of an entirely proactive control strategy, the future operational strategy is optimized based on one's current understanding of the reservoir; this approach does not account for new measurements, as and when they become available, and the improved understanding of the reservoir that they bring. In the case of an entirely reactive control, operational strategy follows rules that are tied to future measurements without recourse to a model-based prediction, e.g., the valve may be closed if significant water ingress is observed. In summary, the proactive strategy seeks to prevent an undesired future result, while the reactive strategy actuates the valves when the undesired event occurs. The approach presented in this article combines these two strategies. This hybrid approach was evaluated against a reservoir model based on the Namorado field, Campos basin, Brazil. The results are compared with scenarios involving a conventional well, but without smart completions, and an entirely proactive control strategy, that does not consider future information. We demonstrate that the approach yields the highest ENPV. The sensitivity of the approach to changes in the number of time steps used for both proactive and reactive control was also considered. For proactive control, the sensitivity analysis examined frequency of valve adjustment in the absence of new information and for reactive control, how fast one needs to react to new and revealing measurement data. This examination revealed that while being operationally proactive is important, there is no value in planning for frequent valve adjustments when there is an absence of new information.
- 27 October 2015
- Published by Society of Petroleum Engineers (SPE)
Proactive and Reactive Strategies for Optimal Operational Design: An Application in Smart Wells
The primary objective of this study is to quantify the benefit of utilizing smart-well technology. The approach presented here maximizes the expected net present value (ENPV) of a field development strategy while accounting for uncertainty in reservoir parameters. In particular the dominant objective is to quantify the relative merits of adopting proactive and/or reactive strategies when designing optimal control policies from their impact on asset value. Proactive or reactive control strategies are the methods typically deployed for controlling smart wells in the presence of reservoir uncertainty. In the case of an entirely proactive control strategy, the future operational strategy is optimized based on one's current understanding of the reservoir; this approach does not account for new measurements, as and when they become available, and the improved understanding of the reservoir that they bring. In the case of an entirely reactive control, operational strategy follows rules that are tied to future measurements without recourse to a model-based prediction, e.g., the valve may be closed if significant water ingress is observed. In summary, the proactive strategy seeks to prevent an undesired future result, while the reactive strategy actuates the valves when the undesired event occurs. The approach presented in this article combines these two strategies. This hybrid approach was evaluated against a reservoir model based on the Namorado field, Campos basin, Brazil. The results are compared with scenarios involving a conventional well, but without smart completions, and an entirely proactive control strategy, that does not consider future information. We demonstrate that the approach yields the highest ENPV. The sensitivity of the approach to changes in the number of time steps used for both proactive and reactive control was also considered. For proactive control, the sensitivity analysis examined frequency of valve adjustment in the absence of new information and for reactive control, how fast one needs to react to new and revealing measurement data. This examination revealed that while being operationally proactive is important, there is no value in planning for frequent valve adjustments when there is an absence of new information.
- 18 June 2015
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 38 (4) , 1345-1355
Principal component analysis for reservoir uncertainty reduction
- 18 June 2015
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 38 (4) , 1345-1355
Principal component analysis for reservoir uncertainty reduction
- 1 April 2015
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 128, 1-14
A methodology to evaluate and reduce reservoir uncertainties using multivariate distribution
- 1 April 2015
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 128, 1-14
A methodology to evaluate and reduce reservoir uncertainties using multivariate distribution
- 29 October 2013
- Published by Society of Petroleum Engineers (SPE)
Design of Objective Function for Interference Well Testing
Multi-well interference tests are performed among neighboring wells for reservoir characterization, to assess heterogeneity, and to estimate formation mobility and storativity in the area of these wells. Interference tests are particularly useful where there is some uncertainty in the geology between two wells, such as the conductivity of a fault, fracture corridors in naturally fractured media, or other sources of significant heterogeneity. However, the analysis of such interference tests can be challenging. During an interference test, a volume of influence develops around and between the wells, and the dynamic pressure response from the two wells may be used for interpretation. Reservoir transmissibility and borehole storage are the main elements affecting the attenuation of the pressure response. Accurate, high resolution, pressure measurements become more important for smaller pressure responses, to enable the data to be used for reservoir description. The relative size of the pressure differences observed at each well and the small absolute pressure change at the observation well(s) may become a challenge to the interpretation of the data. In this paper we review the methods available to quantitatively interpret interference test data from multiple wells simultaneously. Concentrating on grid-based parameter estimation methods, we propose an objective function that is designed to effectively combine data from source and observation wells. Combining data from different wells requires weighting and scaling of the measurement errors in the objective function to ensure the relative impact of each data set is correctly accounted for. Different weighting strategies are tested to explore the impact on pressure match. Our objective function permitted us to simultaneously incorporate the data from both the observation and source wells. This allowed us to more effectively apply methods grid-based parameter estimation for the inversion of reservoir properties from pressure transient test data for interference tests. By determining what values of measurement error used in the objective function lead to the best interpretation, we are able to suggest an acceptable level of noise in test design. Introduction: In single-well testing, the primary objective is to focus on the near-well region. Significant information is collected during the well test that can improve the reservoir characterization in this region. To investigate the area between wells, more than one well must be directly involved in the test. Multi-well interference tests are performed among neighboring wells for reservoir characterization, to assess heterogeneity, and to estimate formation mobility (k/µ) and storativity (f, c), where k = permeability, µ = viscosity, f = porosity, and c = compressibility in the area of these wells. The most common interference test is done between two wells: one is the active (producing) well and the other one is the observation well. In the active production (or injection) well, single or multiple drawdown tests and a subsequent buildup test are performed while the observation well is shut-in for the duration of the test. Interference well tests are particularly useful to delineate fault conductivities (or non-conductivities), natural fracture conductivities and distribution within the reservoir, and heterogeneity in general. Combined with conventional single-well testing, interference well test can also improve the understanding of reservoir layering, fracture orientation and the location of barriers to the flow. In most applications of interference testing, flow rates are measured at the surface, wellbore pressures are measured downhole, and wellbore storage significantly affects pressure measurements at both wells.
- 29 October 2013
- Published by Society of Petroleum Engineers (SPE)
Design of Objective Function for Interference Well Testing
Multi-well interference tests are performed among neighboring wells for reservoir characterization, to assess heterogeneity, and to estimate formation mobility and storativity in the area of these wells. Interference tests are particularly useful where there is some uncertainty in the geology between two wells, such as the conductivity of a fault, fracture corridors in naturally fractured media, or other sources of significant heterogeneity. However, the analysis of such interference tests can be challenging. During an interference test, a volume of influence develops around and between the wells, and the dynamic pressure response from the two wells may be used for interpretation. Reservoir transmissibility and borehole storage are the main elements affecting the attenuation of the pressure response. Accurate, high resolution, pressure measurements become more important for smaller pressure responses, to enable the data to be used for reservoir description. The relative size of the pressure differences observed at each well and the small absolute pressure change at the observation well(s) may become a challenge to the interpretation of the data. In this paper we review the methods available to quantitatively interpret interference test data from multiple wells simultaneously. Concentrating on grid-based parameter estimation methods, we propose an objective function that is designed to effectively combine data from source and observation wells. Combining data from different wells requires weighting and scaling of the measurement errors in the objective function to ensure the relative impact of each data set is correctly accounted for. Different weighting strategies are tested to explore the impact on pressure match. Our objective function permitted us to simultaneously incorporate the data from both the observation and source wells. This allowed us to more effectively apply methods grid-based parameter estimation for the inversion of reservoir properties from pressure transient test data for interference tests. By determining what values of measurement error used in the objective function lead to the best interpretation, we are able to suggest an acceptable level of noise in test design. Introduction: In single-well testing, the primary objective is to focus on the near-well region. Significant information is collected during the well test that can improve the reservoir characterization in this region. To investigate the area between wells, more than one well must be directly involved in the test. Multi-well interference tests are performed among neighboring wells for reservoir characterization, to assess heterogeneity, and to estimate formation mobility (k/µ) and storativity (f, c), where k = permeability, µ = viscosity, f = porosity, and c = compressibility in the area of these wells. The most common interference test is done between two wells: one is the active (producing) well and the other one is the observation well. In the active production (or injection) well, single or multiple drawdown tests and a subsequent buildup test are performed while the observation well is shut-in for the duration of the test. Interference well tests are particularly useful to delineate fault conductivities (or non-conductivities), natural fracture conductivities and distribution within the reservoir, and heterogeneity in general. Combined with conventional single-well testing, interference well test can also improve the understanding of reservoir layering, fracture orientation and the location of barriers to the flow. In most applications of interference testing, flow rates are measured at the surface, wellbore pressures are measured downhole, and wellbore storage significantly affects pressure measurements at both wells.
- 1 July 2011
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 78 (1) , 32-41
Influence of the objective function in the history matching process
- 1 July 2011
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 78 (1) , 32-41
Influence of the objective function in the history matching process