Simon A. Stewart
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Simon A. Stewart has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Richard J. Davies
School of Geography, Earth and Environmental Sciences, University of Plymouth, Plymouth PL4 8AA, UK
2 shared publicationsA. O. Abdullah
Saudi Aramco Dhahran Saudi Arabia
1 shared publicationA. S. Salem
Saudi Aramco Dhahran Saudi Arabia
1 shared publicationA.S. Muslem
1 shared publicationA.S. Salem
Saudi Aramco, Dhahran 31311, Saudi Arabia
1 shared publication- Abdulkader M. Afifi1 shared publication
Latest Publications
- Open Access
- 5 November 2026
- Published by American Journal of Science (AJS) in American Journal of Science
- Vol. 326
Reflection Seismic Insights Into the Pleistocene An-Nafud Sand Sea and the Underlying Paleozoic to Ediacaran Geology North of the Arabian Shield
The An-Nafud sand sea formed during the Pleistocene and occupies approximately 60,200 km 2 of northern Saudi Arabia. The erg has regional significance within the North African – Arabian Pleistocene desert trend, recording aeolian system development and early hominin migrations, while the underlying geology represents the poorly-documented Ediacaran and Paleozoic history of the northern sector of the Arabian plate. Reflection seismic data and deep wells have been used to establish the first description of the 3D geometry of this erg and the tectonostratigraphy of the underlying bedrock geology. The total volume of the erg is calculated at 9,399 km 3 , equivalent to 17.4 trillion tons of sand. The erg infills a cuesta topography eroded into gently-dipping Paleozoic strata. A widespread lake deposit is interpreted within the erg from reflection seismic, and relationships between major units within the erg include Late Pleistocene lake beds with hominin footprints overlain by 100 m - scale megadunes. A subcrop map to the erg establishes continuity of the pre-Pleistocene formation boundaries that trend away from the erg margins. A system of extensional faults with up to 1 km throw mapped within the Paleozoic strata is part of a more extensive trend associated with Red Sea rifting. One fault appears to offset the base of the erg by 125 m and related seismicity may have impacted Pleistocene hominins. The top of Precambrian basement occurs at depths of up to 6 km, infilling Ediacaran paleotopography that causes the oldest Paleozoic strata to onlap and differentially compact over features interpreted as eroded, castellated Precambrian granitic plutons.
- 5 November 2026
- Published by American Journal of Science (AJS) in American Journal of Science
- Vol. 326
Open AccessReflection Seismic Insights Into the Pleistocene An-Nafud Sand Sea and the Underlying Paleozoic to Ediacaran Geology North of the Arabian Shield
The An-Nafud sand sea formed during the Pleistocene and occupies approximately 60,200 km 2 of northern Saudi Arabia. The erg has regional significance within the North African – Arabian Pleistocene desert trend, recording aeolian system development and early hominin migrations, while the underlying geology represents the poorly-documented Ediacaran and Paleozoic history of the northern sector of the Arabian plate. Reflection seismic data and deep wells have been used to establish the first description of the 3D geometry of this erg and the tectonostratigraphy of the underlying bedrock geology. The total volume of the erg is calculated at 9,399 km 3 , equivalent to 17.4 trillion tons of sand. The erg infills a cuesta topography eroded into gently-dipping Paleozoic strata. A widespread lake deposit is interpreted within the erg from reflection seismic, and relationships between major units within the erg include Late Pleistocene lake beds with hominin footprints overlain by 100 m - scale megadunes. A subcrop map to the erg establishes continuity of the pre-Pleistocene formation boundaries that trend away from the erg margins. A system of extensional faults with up to 1 km throw mapped within the Paleozoic strata is part of a more extensive trend associated with Red Sea rifting. One fault appears to offset the base of the erg by 125 m and related seismicity may have impacted Pleistocene hominins. The top of Precambrian basement occurs at depths of up to 6 km, infilling Ediacaran paleotopography that causes the oldest Paleozoic strata to onlap and differentially compact over features interpreted as eroded, castellated Precambrian granitic plutons.
- 14 May 2026
- Published by Geological Society of America in Geology
- Vol. 54 (8) , 827-831
Newly identified type of fault system: Circular antithetic extensional faults
We describe a previously undocumented fault type that occurs hundreds of meters below certain kilometer-scale, circular geological structures in sedimentary basins. The faults are circular in plan view and are found at a radius of several kilometers from the host geological structure. The faults dip away from, and are therefore antithetical to, the geological structure around which they are concentric. The faults are extensional with displacements in the order of tens of meters and low displacement-length ratios compared with typical extensional faults. Their kinematics demand concentric contraction (hoop strain), but no evidence for this, such as radial or transfer structures, is seen. Examples are presented from a mud volcano in the Caspian Sea and a crater structure in Saudi Arabia. A generic kinematic model was developed in which the antithetically faulted layer acts as a thick detachment accommodating minor amounts of inward-directed movement of the shallower structural levels. The inward-directed displacement is balanced in the central zone by squeezing of the volcanic pipe system or movement into the crater void. The hoop strain required by the kinematics is assumed to be accommodated by lateral compaction that is below the resolution of seismic reflection data. The only prerequisite for these fault systems appears to be that the host geology contains one or more relatively flat-lying layers that is/are prone to simple shear. The examples from different geological settings demonstrate that circular antithetic extensional fault systems may occur in association with volcanic, crater, and perhaps other structure types in sedimentary basins.
- 14 May 2026
- Published by Geological Society of America in Geology
- Vol. 54 (8) , 827-831
Newly identified type of fault system: Circular antithetic extensional faults
We describe a previously undocumented fault type that occurs hundreds of meters below certain kilometer-scale, circular geological structures in sedimentary basins. The faults are circular in plan view and are found at a radius of several kilometers from the host geological structure. The faults dip away from, and are therefore antithetical to, the geological structure around which they are concentric. The faults are extensional with displacements in the order of tens of meters and low displacement-length ratios compared with typical extensional faults. Their kinematics demand concentric contraction (hoop strain), but no evidence for this, such as radial or transfer structures, is seen. Examples are presented from a mud volcano in the Caspian Sea and a crater structure in Saudi Arabia. A generic kinematic model was developed in which the antithetically faulted layer acts as a thick detachment accommodating minor amounts of inward-directed movement of the shallower structural levels. The inward-directed displacement is balanced in the central zone by squeezing of the volcanic pipe system or movement into the crater void. The hoop strain required by the kinematics is assumed to be accommodated by lateral compaction that is below the resolution of seismic reflection data. The only prerequisite for these fault systems appears to be that the host geology contains one or more relatively flat-lying layers that is/are prone to simple shear. The examples from different geological settings demonstrate that circular antithetic extensional fault systems may occur in association with volcanic, crater, and perhaps other structure types in sedimentary basins.
- 6 April 2026
- Published by Wiley in Meteoritics & Planetary Science
- Vol. 61 (5) , 782-800
3‐D seismic mapping of a kilometer‐scale Neogene probable impact crater in Saudi Arabia
A previously unreported crater is identified on 3‐D reflection seismic data onshore eastern Saudi Arabia. It is 6.5 km in diameter and buried a few hundred meters below ground level, yet the only surface expression is a subtle topographic depression in the present‐day environment of sabkhas and windblown dunes. Strata are affected by the crater to a depth of approximately 1 km and are tied to a drilled well, 17 km from the crater rim, that provides lithology and age of the deformed sediments, which range from Neogene to Upper Cretaceous. The crater age is late Miocene or Pliocene in this interpretation. The structural geology of the crater is clearly imaged in 3‐D across a present‐day depth range of 200–600 m below ground level. Structural elements include a central high surrounded by well‐developed concentric and radial fault sets that bound fault blocks in the crater walls. Causal mechanisms are examined with a focus on dissolution tectonics since the affected strata include evaporites. However, the scale, unique structural style, and vertical extent of the crater that reaches far below the evaporites rule out evaporite dissolution as the primary genetic mechanism. Diapirism of deep salt and volcanism are also rejected, leaving hypervelocity asteroid or comet impact as a preferred but unproven interpretation. The size, shallow depth of burial, and complete preservation of this structure make it an excellent candidate for tailored future data acquisition and research into crater geometry and mechanics.
- 6 April 2026
- Published by Wiley in Meteoritics & Planetary Science
- Vol. 61 (5) , 782-800
3‐D seismic mapping of a kilometer‐scale Neogene probable impact crater in Saudi Arabia
A previously unreported crater is identified on 3‐D reflection seismic data onshore eastern Saudi Arabia. It is 6.5 km in diameter and buried a few hundred meters below ground level, yet the only surface expression is a subtle topographic depression in the present‐day environment of sabkhas and windblown dunes. Strata are affected by the crater to a depth of approximately 1 km and are tied to a drilled well, 17 km from the crater rim, that provides lithology and age of the deformed sediments, which range from Neogene to Upper Cretaceous. The crater age is late Miocene or Pliocene in this interpretation. The structural geology of the crater is clearly imaged in 3‐D across a present‐day depth range of 200–600 m below ground level. Structural elements include a central high surrounded by well‐developed concentric and radial fault sets that bound fault blocks in the crater walls. Causal mechanisms are examined with a focus on dissolution tectonics since the affected strata include evaporites. However, the scale, unique structural style, and vertical extent of the crater that reaches far below the evaporites rule out evaporite dissolution as the primary genetic mechanism. Diapirism of deep salt and volcanism are also rejected, leaving hypervelocity asteroid or comet impact as a preferred but unproven interpretation. The size, shallow depth of burial, and complete preservation of this structure make it an excellent candidate for tailored future data acquisition and research into crater geometry and mechanics.
- 27 March 2026
- Published by Geological Society of London in Petroleum Geoscience
- Vol. 32 (2)
Use of iron-bearing scavenging reservoirs to unlock stranded sour hydrocarbons with amber hydrogen by-product
Hydrogen sulfide (H 2 S) is a relatively common component in hydrocarbon fields, where it may be mixed with hydrocarbon oil or gas in proportions of up to 50% or more. Such hydrocarbons are often described as ‘sour’. The H 2 S primarily originates from thermochemical sulfate reduction associated with evaporites, although biogenic pathways may apply in some cases. Hydrocarbon fields with the highest concentrations of H 2 S often remain undeveloped, representing already-discovered resources that could support the transition towards a lower-carbon economy. Meanwhile, hydrogen – recognized as a critical element of the energy transition – can be obtained from H 2 S currently by several energy consuming processes. A new subsurface engineering concept introduced here combines the rehabilitation of stranded sour hydrocarbon resources via H 2 S removal with the production of potentially economic amounts of hydrogen. The proposed approach removes H 2 S from the hydrocarbons as they are passed through a subsurface iron-bearing ‘scavenging’ reservoir. Reactions between the sour hydrocarbons and the iron minerals in this reservoir convert H 2 S to solid iron sulfide (pyrite) releasing hydrogen gas during the process. Sweetened hydrocarbons, hydrogen or both can then be produced. Subsurface removal of H 2 S and sequestering of sulfur from known stranded hydrocarbons avoids the cost and risk of surface-based H 2 S facilities, as well as exploration costs for new hydrocarbons in pristine locations. Here we term hydrogen produced from H 2 S in this way ‘amber hydrogen’, an addition to the hydrogen colour spectrum that can also be applied to hydrogen produced from H 2 S by any method.
- 27 March 2026
- Published by Geological Society of London in Petroleum Geoscience
- Vol. 32 (2)
Use of iron-bearing scavenging reservoirs to unlock stranded sour hydrocarbons with amber hydrogen by-product
Hydrogen sulfide (H 2 S) is a relatively common component in hydrocarbon fields, where it may be mixed with hydrocarbon oil or gas in proportions of up to 50% or more. Such hydrocarbons are often described as ‘sour’. The H 2 S primarily originates from thermochemical sulfate reduction associated with evaporites, although biogenic pathways may apply in some cases. Hydrocarbon fields with the highest concentrations of H 2 S often remain undeveloped, representing already-discovered resources that could support the transition towards a lower-carbon economy. Meanwhile, hydrogen – recognized as a critical element of the energy transition – can be obtained from H 2 S currently by several energy consuming processes. A new subsurface engineering concept introduced here combines the rehabilitation of stranded sour hydrocarbon resources via H 2 S removal with the production of potentially economic amounts of hydrogen. The proposed approach removes H 2 S from the hydrocarbons as they are passed through a subsurface iron-bearing ‘scavenging’ reservoir. Reactions between the sour hydrocarbons and the iron minerals in this reservoir convert H 2 S to solid iron sulfide (pyrite) releasing hydrogen gas during the process. Sweetened hydrocarbons, hydrogen or both can then be produced. Subsurface removal of H 2 S and sequestering of sulfur from known stranded hydrocarbons avoids the cost and risk of surface-based H 2 S facilities, as well as exploration costs for new hydrocarbons in pristine locations. Here we term hydrogen produced from H 2 S in this way ‘amber hydrogen’, an addition to the hydrogen colour spectrum that can also be applied to hydrogen produced from H 2 S by any method.
- 27 June 2024
- Published by Geological Society of America in Geological Society of America Bulletin
- Vol. 137 (1-2) , 67-81
Hydrological phenomena related to elevation head on the Arabian Plate
Arabian Plate geology consists of exposed basement in the west overlain by a Phanerozoic sequence in the east that reaches 10 km in thickness and incorporates the Zagros fold-and-thrust belt on the northeast margin of the plate. The Phanerozoic wedge results from Neogene to Recent plate tilt and consequent uplift and erosion, exposing most of the Phanerozoic formations at outcrop, becoming progressively older from the east coast of Saudi Arabia, to the Arabian Shield at an altitude of ~900 m. Reservoirs in this Phanerozoic sequence that have top and base seals but are laterally extensive and open to the land surface have active hydrodynamics, with flow driven up to 1000 km northeastward into the basin by elevation head, discharging into the Arabian Gulf via topseal failures deep in the basin. Deep wells and seismic reflection data originally acquired for hydrocarbon exploration have been repurposed to investigate the basin-scale hydrogeology. This data has revealed previously undescribed phenomena including intra-reservoir haloclines separating fresh and saline water layers more than 1000 m below sea level, and quantified regional hydraulic gradients and an area of over 60,000 km2 where the vadose zone is up to 450 in thickness. Hydraulic gradients have been measured by wells at ~1 m/km in several different reservoirs.
- 27 June 2024
- Published by Geological Society of America in Geological Society of America Bulletin
- Vol. 137 (1-2) , 67-81
Hydrological phenomena related to elevation head on the Arabian Plate
Arabian Plate geology consists of exposed basement in the west overlain by a Phanerozoic sequence in the east that reaches 10 km in thickness and incorporates the Zagros fold-and-thrust belt on the northeast margin of the plate. The Phanerozoic wedge results from Neogene to Recent plate tilt and consequent uplift and erosion, exposing most of the Phanerozoic formations at outcrop, becoming progressively older from the east coast of Saudi Arabia, to the Arabian Shield at an altitude of ~900 m. Reservoirs in this Phanerozoic sequence that have top and base seals but are laterally extensive and open to the land surface have active hydrodynamics, with flow driven up to 1000 km northeastward into the basin by elevation head, discharging into the Arabian Gulf via topseal failures deep in the basin. Deep wells and seismic reflection data originally acquired for hydrocarbon exploration have been repurposed to investigate the basin-scale hydrogeology. This data has revealed previously undescribed phenomena including intra-reservoir haloclines separating fresh and saline water layers more than 1000 m below sea level, and quantified regional hydraulic gradients and an area of over 60,000 km2 where the vadose zone is up to 450 in thickness. Hydraulic gradients have been measured by wells at ~1 m/km in several different reservoirs.
- 8 January 2024
- Published by Geological Society of London in Geoenergy
- Vol. 2 (1)
Mapping hydrodynamic structure with sparse or no well data
Hydrodynamic traps are usually mapped using well pressure data to transform structural depth maps, but if well data are sparse then hydrodynamic maps produced this way may have large uncertainties. An alternative approach that does not rely on well data is described here, utilizing simplified, locally planar representation of the potentiometric surface. Ranges of hydraulic gradient magnitudes and azimuths representing different potentiometric surface orientations, together with a range of possible density contrasts between the flowing and trapped fluids, define a three-dimensional array, termed here ‘hydrodynamic space’. This array can be constrained and simplified by reasonable assumptions and the introduction of an additional new concept that combines the hydraulic gradient magnitude and fluid density contrast into a single parameter termed ‘potentiometric transform’. Ranges of these parameters yield a set of hydrodynamic structural maps. The fineness of sampling the hydrodynamic space parameters is limited only by the resources available to support the workflow. The array can be automatically assessed in terms of hydrodynamic trap volumes by applying a structural closure algorithm that isolates and characterizes dip-closed structure. Closure volumes across the map set are ranked by spatial distribution analysis that informs exploration programs relevant to any subsurface fluid management application. The method is described for the first time here and illustrated by application to a real structural dataset.
- 8 January 2024
- Published by Geological Society of London in Geoenergy
- Vol. 2 (1)
Mapping hydrodynamic structure with sparse or no well data
Hydrodynamic traps are usually mapped using well pressure data to transform structural depth maps, but if well data are sparse then hydrodynamic maps produced this way may have large uncertainties. An alternative approach that does not rely on well data is described here, utilizing simplified, locally planar representation of the potentiometric surface. Ranges of hydraulic gradient magnitudes and azimuths representing different potentiometric surface orientations, together with a range of possible density contrasts between the flowing and trapped fluids, define a three-dimensional array, termed here ‘hydrodynamic space’. This array can be constrained and simplified by reasonable assumptions and the introduction of an additional new concept that combines the hydraulic gradient magnitude and fluid density contrast into a single parameter termed ‘potentiometric transform’. Ranges of these parameters yield a set of hydrodynamic structural maps. The fineness of sampling the hydrodynamic space parameters is limited only by the resources available to support the workflow. The array can be automatically assessed in terms of hydrodynamic trap volumes by applying a structural closure algorithm that isolates and characterizes dip-closed structure. Closure volumes across the map set are ranked by spatial distribution analysis that informs exploration programs relevant to any subsurface fluid management application. The method is described for the first time here and illustrated by application to a real structural dataset.
- 8 January 2024
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 12 (3) , C1-C17
Carbonate mounds formed by mud volcanism at the Cretaceous-Paleogene boundary, Saudi Arabia
More than 1000 mound structures have been mapped in shallow marine sediments at the Cretaceous-Paleogene boundary in the Rub’ Al-Khali of Saudi Arabia. Mapping used 3D reflection seismic data in a 37,000 km2 study area. No wells penetrate the mounds themselves. The mounds are at a present-day subsurface depth of approximately 1 km, and they are convex-up with diameters of 200–400 m and elevation of 10–15 m. The mounds display spatial self-organization with a mean separation of approximately 3.75 km. Comparison with mound populations in other study areas with known spatial distribution statistics and modes of origin indicates that the mound population in this study has the characteristics of fluid escape structures, and they are interpreted here as mud volcanoes. The observation that the mounds occur at the Cretaceous-Paleogene boundary demands a singular trigger at that moment in time. We develop a model of seismic energy-related mud volcanism mechanism including the Chicxulub asteroid impact as the energy source that accounts for the timing of the mound structures and a drainage cell model based on producing water wells that provides a mechanism for spatial self-organization into a regular pattern.
- 8 January 2024
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 12 (3) , C1-C17
Carbonate mounds formed by mud volcanism at the Cretaceous-Paleogene boundary, Saudi Arabia
More than 1000 mound structures have been mapped in shallow marine sediments at the Cretaceous-Paleogene boundary in the Rub’ Al-Khali of Saudi Arabia. Mapping used 3D reflection seismic data in a 37,000 km2 study area. No wells penetrate the mounds themselves. The mounds are at a present-day subsurface depth of approximately 1 km, and they are convex-up with diameters of 200–400 m and elevation of 10–15 m. The mounds display spatial self-organization with a mean separation of approximately 3.75 km. Comparison with mound populations in other study areas with known spatial distribution statistics and modes of origin indicates that the mound population in this study has the characteristics of fluid escape structures, and they are interpreted here as mud volcanoes. The observation that the mounds occur at the Cretaceous-Paleogene boundary demands a singular trigger at that moment in time. We develop a model of seismic energy-related mud volcanism mechanism including the Chicxulub asteroid impact as the energy source that accounts for the timing of the mound structures and a drainage cell model based on producing water wells that provides a mechanism for spatial self-organization into a regular pattern.
- 20 April 2023
- Published by Elsevier in Tectonophysics
- Vol. 856
Proterozoic fold and thrust belt imaged on reflection seismic in Arabian plate basement
- 20 April 2023
- Published by Elsevier in Tectonophysics
- Vol. 856
Proterozoic fold and thrust belt imaged on reflection seismic in Arabian plate basement
- 2 November 2022
- Published by Wiley in Basin Research
- Vol. 35 (1) , 172-186
Hydrostatic pore water pressure revisited
Hydrostatic or “normal” pressure can be easily visualized as a water column with pressure given by ρgh and any departures classified as abnormal pressure. This is the basis for commonly used hydrostatic pressure depth trends in sedimentary basins that are constructed on assumptions of constant gradients and are datumed at mean sea level or ground level. But the straightforward water column concept does not upscale in a simple way to sedimentary basins where the zones of interest are several thousands of metres below the land or sea surface. Sedimentary basins are heterogeneous, including stacked, confined reservoirs and variations in pore water composition. It is possible to construct pressure‐depth profiles that honour the geology and hydrostratigraphy of a basin and these give different hydrostatic baselines from simple constant gradients hung from familiar local datums such as ground level. Key steps are using a reservoir‐specific datums such as the water table or potentiometric surface relevant to that unit, then building a pressure‐depth trend that represents the pore fluid salinity variation and density profile throughout the reservoir unit. At a given depth, this version of hydrostatic may predict pressures several hundred psi different from a single density gradient hung from a datum local to the well, and exhibit a notched profile reflecting the geological and hydrological stratigraphy. This construct redefines normal and abnormal pore fluid pressures in sedimentary basins. The impacts of this alternative approach to sedimentary basin hydrostatics, even if data are limited and pressure profiles have to be framed probabilistically, extend to many aspects of studying and interacting with fluid systems in sedimentary basins including basin modelling, petroleum systems analysis, well planning and well operations.
- 2 November 2022
- Published by Wiley in Basin Research
- Vol. 35 (1) , 172-186
Hydrostatic pore water pressure revisited
Hydrostatic or “normal” pressure can be easily visualized as a water column with pressure given by ρgh and any departures classified as abnormal pressure. This is the basis for commonly used hydrostatic pressure depth trends in sedimentary basins that are constructed on assumptions of constant gradients and are datumed at mean sea level or ground level. But the straightforward water column concept does not upscale in a simple way to sedimentary basins where the zones of interest are several thousands of metres below the land or sea surface. Sedimentary basins are heterogeneous, including stacked, confined reservoirs and variations in pore water composition. It is possible to construct pressure‐depth profiles that honour the geology and hydrostratigraphy of a basin and these give different hydrostatic baselines from simple constant gradients hung from familiar local datums such as ground level. Key steps are using a reservoir‐specific datums such as the water table or potentiometric surface relevant to that unit, then building a pressure‐depth trend that represents the pore fluid salinity variation and density profile throughout the reservoir unit. At a given depth, this version of hydrostatic may predict pressures several hundred psi different from a single density gradient hung from a datum local to the well, and exhibit a notched profile reflecting the geological and hydrological stratigraphy. This construct redefines normal and abnormal pore fluid pressures in sedimentary basins. The impacts of this alternative approach to sedimentary basin hydrostatics, even if data are limited and pressure profiles have to be framed probabilistically, extend to many aspects of studying and interacting with fluid systems in sedimentary basins including basin modelling, petroleum systems analysis, well planning and well operations.
- 30 June 2022
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 179 (8) , 2817-2830
Length Scale as a Fourth Spatial Dimension in Geology and Geophysics
- 30 June 2022
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 179 (8) , 2817-2830
Length Scale as a Fourth Spatial Dimension in Geology and Geophysics