Ignacio Jose Villar Garcia
Ignacio Jose Villar Garcia has a total of 230 co-authors. Here are the top co-authors by number of shared publications:
Peter Licence
School of Chemistry The University of Nottingham Nottingham UK
11 shared publications- Kevin R. J. Lovelock
Department of Chemistry, University of Reading, Reading, UK
10 shared publications - David J. Payne
Department of Materials, Imperial College London, South Kensington, London SW7 2AZ, UK
7 shared publications - Victor Antonio de la Peña‐O'SHea
IMDEA Energy Institute
7 shared publications - Mariam Barawi
IMDEA Energy Institute, Av. Ramon de la Sagra, 3, Mostoles 28935, Madrid, Spain
6 shared publications - Peter Licence
University of Nottingham
5 shared publications
Latest Publications
- Open Access
- 22 July 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 655
The long cycle capability and charge storage mechanism of V4O9 as sodium storing cathode
- 22 July 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 655
Open AccessThe long cycle capability and charge storage mechanism of V4O9 as sodium storing cathode
- 3 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (13)
Front Cover: Hydrogen Sensing via Heterolytic H2 Activation at Room Temperature by Atomic Layer Deposited Ceria (ChemSusChem 13/2025)
- 3 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (13)
Front Cover: Hydrogen Sensing via Heterolytic H2 Activation at Room Temperature by Atomic Layer Deposited Ceria (ChemSusChem 13/2025)
- Open Access
- 20 February 2025
- Published by Wiley in Small Science
- Vol. 5 (6)
Hybrid Photoelectrodes Based on Electropolymerized Conjugated Porous Polymers for Enhanced Solar Energy Conversion
This work highlights and offers fundamental insights on the potential of electropolymerized conjugated porous polymers in developing efficient hybrid photoelectrodes for photoelectrochemical applications. A simple and cost‐effective electropolymerization strategy to create hybrid organic–inorganic photoelectrodes based on two thiophene‐based conjugated porous polymers (CPP‐3TB and IEP‐19) for enhanced solar energy conversion is used. These polymers, when integrated with TiO2 to form hybrid photoanodes, exhibit enhanced photopotentials and photocurrents compared to bare TiO2. This synergetic behavior is attributed to an increased visible light absorption, reduced charge transfer resistance, and minimized electron–hole recombination. In particular, detailed electrochemical and spectroscopic analyses, including electrochemical impedance spectroscopy and transient absorption spectroscopy, reveal that the hybrid systems’ superior charge transport and longer photogenerated charge lifetimes contribute to their increased efficiency in solar energy conversion. Moreover, by comparing the structure and behavior of both hybrid systems, corner stone knowledge for the synthesis of CPPs to guide the construction of the future photoelectrochemical cells for solar energy conversion is offered.
- 20 February 2025
- Published by Wiley in Small Science
- Vol. 5 (6)
Open AccessHybrid Photoelectrodes Based on Electropolymerized Conjugated Porous Polymers for Enhanced Solar Energy Conversion
This work highlights and offers fundamental insights on the potential of electropolymerized conjugated porous polymers in developing efficient hybrid photoelectrodes for photoelectrochemical applications. A simple and cost‐effective electropolymerization strategy to create hybrid organic–inorganic photoelectrodes based on two thiophene‐based conjugated porous polymers (CPP‐3TB and IEP‐19) for enhanced solar energy conversion is used. These polymers, when integrated with TiO2 to form hybrid photoanodes, exhibit enhanced photopotentials and photocurrents compared to bare TiO2. This synergetic behavior is attributed to an increased visible light absorption, reduced charge transfer resistance, and minimized electron–hole recombination. In particular, detailed electrochemical and spectroscopic analyses, including electrochemical impedance spectroscopy and transient absorption spectroscopy, reveal that the hybrid systems’ superior charge transport and longer photogenerated charge lifetimes contribute to their increased efficiency in solar energy conversion. Moreover, by comparing the structure and behavior of both hybrid systems, corner stone knowledge for the synthesis of CPPs to guide the construction of the future photoelectrochemical cells for solar energy conversion is offered.
- Open Access
- 3 February 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (13) , e202402342
Hydrogen Sensing via Heterolytic H2 Activation at Room Temperature by Atomic Layer Deposited Ceria
Ultrathin atomic layer deposited ceria films (2 heterolytic activation at room temperature, undergoing a significant reduction regardless of the absolute pressure, as measured under in‐situ conditions by near ambient pressure X‐ray photoelectron spectroscopy. ALD‐ceria can gradually reduce as a function of H2 concentration under H2/O2 environments, especially for diluted mixtures below 10 %. At room temperature, this reduction is limited to the surface region, where the hydroxylation of the ceria surface induces a charge transfer towards the ceria matrix, reducing Ce4+ cations to Ce3+. Thus, ALD‐ceria replicates the expected sensing mechanism of metal oxides at low temperatures without using any noble metal decorating the oxide surface to enhance H2 dissociation. The intrinsic defects of the ALD deposit seem to play a crucial role since the post‐annealing process capable of healing these defects leads to decreased film reactivity. The sensing behavior was successfully demonstrated in sensor test structures by resistance changes towards low concentrations of H2 at low operating temperatures without using noble metals. These promising results call for combining ALD‐ceria with more conductive metal oxides, taking advantage of the charge transfer at the interface and thus modifying the depletion layer formed at the heterojunction.
- 3 February 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (13) , e202402342
Open AccessHydrogen Sensing via Heterolytic H2 Activation at Room Temperature by Atomic Layer Deposited Ceria
Ultrathin atomic layer deposited ceria films (2 heterolytic activation at room temperature, undergoing a significant reduction regardless of the absolute pressure, as measured under in‐situ conditions by near ambient pressure X‐ray photoelectron spectroscopy. ALD‐ceria can gradually reduce as a function of H2 concentration under H2/O2 environments, especially for diluted mixtures below 10 %. At room temperature, this reduction is limited to the surface region, where the hydroxylation of the ceria surface induces a charge transfer towards the ceria matrix, reducing Ce4+ cations to Ce3+. Thus, ALD‐ceria replicates the expected sensing mechanism of metal oxides at low temperatures without using any noble metal decorating the oxide surface to enhance H2 dissociation. The intrinsic defects of the ALD deposit seem to play a crucial role since the post‐annealing process capable of healing these defects leads to decreased film reactivity. The sensing behavior was successfully demonstrated in sensor test structures by resistance changes towards low concentrations of H2 at low operating temperatures without using noble metals. These promising results call for combining ALD‐ceria with more conductive metal oxides, taking advantage of the charge transfer at the interface and thus modifying the depletion layer formed at the heterojunction.
- Open Access
- 19 December 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (8) , e202402141
Multifunctional Heterogeneous Cobalt Catalyst for the One‐Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o‐dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non‐noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom‐incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF‐STEM, XEDS, EELS, and NAP‐XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest.
- 19 December 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (8) , e202402141
Open AccessMultifunctional Heterogeneous Cobalt Catalyst for the One‐Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o‐dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non‐noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom‐incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF‐STEM, XEDS, EELS, and NAP‐XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest.
- Open Access
- 30 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (34) , 22609-22626
Understanding the evolution of ternary alloyed nanoparticles during reversible exsolution from double perovskite oxides
This work unveils the mechanism of FeCoNi alloy reversible exsolution from double perovskites via in situ synchrotron-based NAP-XPS and time-resolved XRD.
- 30 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (34) , 22609-22626
Open AccessUnderstanding the evolution of ternary alloyed nanoparticles during reversible exsolution from double perovskite oxides
This work unveils the mechanism of FeCoNi alloy reversible exsolution from double perovskites via in situ synchrotron-based NAP-XPS and time-resolved XRD.
- Open Access
- 1 April 2024
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 6 (2) , 025024
Unveiling the non-innocence of vanadium dopant in TiO2 nanocrystals for advanced energy storage and smart windows
Vanadium doped TiO2 NCs stand out as a promising candidate for energy storage applications due to its high electrical conductivity and redox properties. However, the thermodynamical behavior of the material under working conditions has not been explored and the reasons for its superior performance remain unlocked. This study explores the use of a combination of advanced in situ spectroscopy techniques, including x-ray absorption spectroscopy (XAS), spectro-electrochemistry (SEC), and electrochemical impedance spectroscopy (EIS) to provide unprecedented insights into the intricate electrochemical reaction mechanisms within these nanocrystals. Density functional theory calculations and EIS reveal the active role of substitutional V ions in the TiO2 anatase network as electron donors, enhancing surface charge and carrier density and improving pseudocapacitive properties. Cyclic voltammetry and in situ SEC reveal that V-doped TiO2 NCs exhibit significantly improved charge storage capacities, particularly in the pseudo-capacitance storage mechanism. In situ SEC and XAS analyses indicate that a more effective reduction of Ti4+ ions occurs during the electrochemical process in doped NCs, leading to higher charge capacitance and faster processes. Furthermore, in situ XAS measurements of the V K-edge revealed that the vanadium ions, beyond improving the redox behavior of the host, also actively participate in the reduction process. The significant changes in the V K-edge XANES and extended x-ray absorption fine structure spectra observed under reduction conditions can be ascribed to a change in the structure and oxidation state of the vanadium ions during the electrochemical reaction.
- 1 April 2024
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 6 (2) , 025024
Open AccessUnveiling the non-innocence of vanadium dopant in TiO2 nanocrystals for advanced energy storage and smart windows
Vanadium doped TiO2 NCs stand out as a promising candidate for energy storage applications due to its high electrical conductivity and redox properties. However, the thermodynamical behavior of the material under working conditions has not been explored and the reasons for its superior performance remain unlocked. This study explores the use of a combination of advanced in situ spectroscopy techniques, including x-ray absorption spectroscopy (XAS), spectro-electrochemistry (SEC), and electrochemical impedance spectroscopy (EIS) to provide unprecedented insights into the intricate electrochemical reaction mechanisms within these nanocrystals. Density functional theory calculations and EIS reveal the active role of substitutional V ions in the TiO2 anatase network as electron donors, enhancing surface charge and carrier density and improving pseudocapacitive properties. Cyclic voltammetry and in situ SEC reveal that V-doped TiO2 NCs exhibit significantly improved charge storage capacities, particularly in the pseudo-capacitance storage mechanism. In situ SEC and XAS analyses indicate that a more effective reduction of Ti4+ ions occurs during the electrochemical process in doped NCs, leading to higher charge capacitance and faster processes. Furthermore, in situ XAS measurements of the V K-edge revealed that the vanadium ions, beyond improving the redox behavior of the host, also actively participate in the reduction process. The significant changes in the V K-edge XANES and extended x-ray absorption fine structure spectra observed under reduction conditions can be ascribed to a change in the structure and oxidation state of the vanadium ions during the electrochemical reaction.
- Open Access
Hydrogen Sensing Mechanism of WS2 Gas Sensors Analyzed with DFT and NAP-XPS
Nanostructured tungsten disulfide (WS2) is one of the most promising candidates for being used as active nanomaterial in chemiresistive gas sensors, as it responds to hydrogen gas at room temperature. This study analyzes the hydrogen sensing mechanism of a nanostructured WS2 layer using near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT). The W 4f and S 2p NAP-XPS spectra suggest that hydrogen makes physisorption on the WS2 active surface at room temperature and chemisorption on tungsten atoms at temperatures above 150 °C. DFT calculations show that a hydrogen molecule physically adsorbs on the defect-free WS2 monolayer, while it splits and makes chemical bonds with the nearest tungsten atoms on the sulfur point defect. The hydrogen adsorption on the sulfur defect causes a large charge transfer from the WS2 monolayer to the adsorbed hydrogen. In addition, it decreases the intensity of the in-gap state, which is generated by the sulfur point defect. Furthermore, the calculations explain the increase in the resistance of the gas sensor when hydrogen interacts with the WS2 active layer.
Open AccessHydrogen Sensing Mechanism of WS2 Gas Sensors Analyzed with DFT and NAP-XPS
Nanostructured tungsten disulfide (WS2) is one of the most promising candidates for being used as active nanomaterial in chemiresistive gas sensors, as it responds to hydrogen gas at room temperature. This study analyzes the hydrogen sensing mechanism of a nanostructured WS2 layer using near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT). The W 4f and S 2p NAP-XPS spectra suggest that hydrogen makes physisorption on the WS2 active surface at room temperature and chemisorption on tungsten atoms at temperatures above 150 °C. DFT calculations show that a hydrogen molecule physically adsorbs on the defect-free WS2 monolayer, while it splits and makes chemical bonds with the nearest tungsten atoms on the sulfur point defect. The hydrogen adsorption on the sulfur defect causes a large charge transfer from the WS2 monolayer to the adsorbed hydrogen. In addition, it decreases the intensity of the in-gap state, which is generated by the sulfur point defect. Furthermore, the calculations explain the increase in the resistance of the gas sensor when hydrogen interacts with the WS2 active layer.
- Open Access
- 1 December 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (3) , 1068-1075
Probing dynamic covalent chemistry in a 2D boroxine framework by in situ near-ambient pressure X-ray photoelectron spectroscopy
Near-ambient pressure X-ray photoelectron spectroscopy enables the in situ observation of polymerization and hydrolysis occurring in an atomically thin boroxine framework on Au(111).
- 1 December 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (3) , 1068-1075
Open AccessProbing dynamic covalent chemistry in a 2D boroxine framework by in situ near-ambient pressure X-ray photoelectron spectroscopy
Near-ambient pressure X-ray photoelectron spectroscopy enables the in situ observation of polymerization and hydrolysis occurring in an atomically thin boroxine framework on Au(111).
- Open Access
- 25 October 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 250
A tandem photoelectrochemical cell based on Cu2-xTe nanocrystals for solar energy conversion to hydrogen
- 25 October 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 250
Open AccessA tandem photoelectrochemical cell based on Cu2-xTe nanocrystals for solar energy conversion to hydrogen