Muthu Austeria P
Research Subjects
Muthu Austeria P has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Srinivasan Sampath
Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560012, India
4 shared publications P. Vinoth Babu
Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560012, India
2 shared publications- Adil Fayaz
Indian Institute of Science
1 shared publication - Akshaya Kumar Samal
Jain University
1 shared publication Amit R. Sonkar
Inorganic Materials and Catalysis Division, CSIR-Central Salt & Marine Chemicals Research Institute, G. B. Marg, Bhavnagar-364 002, Gujarat, India
1 shared publication- Ankush V. Biradar
Inorganic Materials and Catalysis Division, CSIR-Central Salt & Marine Chemicals Research Institute, G. B. Marg, Bhavnagar-364 002, Gujarat, India
1 shared publication
Latest Publications
- 28 October 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 698
Tungsten-doped NiCoSSe on carbon nanotubes for high-performance supercapacitor and hydrogen evolution reaction applications
- 28 October 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 698
Tungsten-doped NiCoSSe on carbon nanotubes for high-performance supercapacitor and hydrogen evolution reaction applications
- 28 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (44) , 60806-60826
Electronic Structure Modulation and Electrochemically Induced Reconstruction of Ni-Doped Fe Oxyhydroxides for Overall Water Splitting
Structurally analogous metal oxyhydroxides such as NiFeOOH and CoFeOOH lie at the pinnacle of the oxygen evolution reaction (OER) volcano plot for alkaline water electrolysis. However, stabilization of a single FeOOH phase is inherently challenging because of the small thermodynamic energy differences among FeOOH polymorphs and the phase selection being governed by crystallization kinetics. Herein, we report a heterovalent Ni doping strategy to stabilize β-FeOOH structural morphology and enhance the local electric field, thereby tuning its electronic conductivity to promote OER activity. Moreover, Ni doping alters the interfacial structure in an optimal OH– ionic environment by lowering the reaction energy barriers at Fe active sites with a significantly lower adsorption free energy of 3.56 eV for the *OOH intermediate. Under cathodic polarization, NFO24/CFC undergoes in situ reconstruction, transforming bulky α-Fe2O3 NCs into hydroxylated rich FeOOH-like thin nanosheets. This structural evolution generates abundant active sites and facilitates charge-transfer kinetics, thereby accounting for its superior hydrogen evolution reaction (HER) activity. Consequently, NFO6/CFC delivers a high anodic current density with an OER overpotential of 355 mV, while NFO24/CFC exhibits superior HER performance with an overpotential of 272 mV at a current density of 10 mA cm–2 in alkaline media. Furthermore, the two-electrode assembly using NFO6/CFC∥NFO24/CFC operates at a cell voltage of 1.87 V to drive overall water splitting and demonstrates long-term stability of 24 h at 10 mA cm–2 in alkaline conditions.
- 28 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (44) , 60806-60826
Electronic Structure Modulation and Electrochemically Induced Reconstruction of Ni-Doped Fe Oxyhydroxides for Overall Water Splitting
Structurally analogous metal oxyhydroxides such as NiFeOOH and CoFeOOH lie at the pinnacle of the oxygen evolution reaction (OER) volcano plot for alkaline water electrolysis. However, stabilization of a single FeOOH phase is inherently challenging because of the small thermodynamic energy differences among FeOOH polymorphs and the phase selection being governed by crystallization kinetics. Herein, we report a heterovalent Ni doping strategy to stabilize β-FeOOH structural morphology and enhance the local electric field, thereby tuning its electronic conductivity to promote OER activity. Moreover, Ni doping alters the interfacial structure in an optimal OH– ionic environment by lowering the reaction energy barriers at Fe active sites with a significantly lower adsorption free energy of 3.56 eV for the *OOH intermediate. Under cathodic polarization, NFO24/CFC undergoes in situ reconstruction, transforming bulky α-Fe2O3 NCs into hydroxylated rich FeOOH-like thin nanosheets. This structural evolution generates abundant active sites and facilitates charge-transfer kinetics, thereby accounting for its superior hydrogen evolution reaction (HER) activity. Consequently, NFO6/CFC delivers a high anodic current density with an OER overpotential of 355 mV, while NFO24/CFC exhibits superior HER performance with an overpotential of 272 mV at a current density of 10 mA cm–2 in alkaline media. Furthermore, the two-electrode assembly using NFO6/CFC∥NFO24/CFC operates at a cell voltage of 1.87 V to drive overall water splitting and demonstrates long-term stability of 24 h at 10 mA cm–2 in alkaline conditions.
- 21 October 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (40) , 25215-25226
Electronic and bonding origin of enhanced phase stability in layered 1T-MoSSe
The superior hydrogen evolution reaction (HER) performance of 1T-MoSSe is primarily due to the S/Se isomeric effect, which is driven by a highly distorted lattice and enhanced structural stability.
- 21 October 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (40) , 25215-25226
Electronic and bonding origin of enhanced phase stability in layered 1T-MoSSe
The superior hydrogen evolution reaction (HER) performance of 1T-MoSSe is primarily due to the S/Se isomeric effect, which is driven by a highly distorted lattice and enhanced structural stability.
- Open Access
- 21 September 2026
- Published by American Chemical Society (ACS) in Chem & Bio Engineering
Synergistically Coupled CoFe Core–Shell Nanoparticles and Fe–N x Motifs in N,S,P-Doped Hierarchical Carbon for Rechargeable Zinc–Air Batteries
Rechargeable zinc–air batteries (ZABs) require efficient and durable bifunctional oxygen electrocatalysts to accelerate both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, we report a hierarchical N, S, and P co-doped carbon catalyst (CoFe/NSP-HC) featuring CoFe core–shell alloy nanoparticles and Fe–Nx coordination motifs, synthesized through a pyrolysis strategy using heteroatom-enriched g-C3N4 as both template and dopant source. Structural characterization reveals a hierarchical porous architecture with uniformly distributed heteroatoms, strong metal–support interactions, and a well-defined Co-rich core/Fe-rich shell configuration. The synergistic integration of CoFe alloy interfaces, Fe–Nx coordination sites, and a defect-rich carbon framework effectively modulates the electronic structure and optimizes the adsorption/desorption behavior of oxygenated intermediates. Consequently, the optimized CoFe/NSP-HC catalyst exhibits bifunctional activity with an ORR half-wave potential of 0.82 V and an OER overpotential of 260 mV at 10 mA cm–2, delivering a low bifunctional potential gap (ΔE) of 0.67 V. Furthermore, the catalyst demonstrates robust electrochemical durability, maintaining stable ORR/OER performance after prolonged cycling. Density functional theory calculations reveal that Fe–Nx sites and Fe-based interfacial centers provide favorable reaction energetics for oxygen electrocatalysis, while Co species contribute to electronic modulation and kinetic enhancement. When employed as the air cathode in a rechargeable ZAB, CoFe/NSP-HC delivers a peak power density of 158.7 mW cm–2 and long-term cycling stability exceeding 350 h. This work provides an effective strategy for constructing multi-component electrocatalysts with synergistically engineered active sites for advanced metal–air energy storage systems.
- 21 September 2026
- Published by American Chemical Society (ACS) in Chem & Bio Engineering
Open AccessSynergistically Coupled CoFe Core–Shell Nanoparticles and Fe–N x Motifs in N,S,P-Doped Hierarchical Carbon for Rechargeable Zinc–Air Batteries
Rechargeable zinc–air batteries (ZABs) require efficient and durable bifunctional oxygen electrocatalysts to accelerate both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, we report a hierarchical N, S, and P co-doped carbon catalyst (CoFe/NSP-HC) featuring CoFe core–shell alloy nanoparticles and Fe–Nx coordination motifs, synthesized through a pyrolysis strategy using heteroatom-enriched g-C3N4 as both template and dopant source. Structural characterization reveals a hierarchical porous architecture with uniformly distributed heteroatoms, strong metal–support interactions, and a well-defined Co-rich core/Fe-rich shell configuration. The synergistic integration of CoFe alloy interfaces, Fe–Nx coordination sites, and a defect-rich carbon framework effectively modulates the electronic structure and optimizes the adsorption/desorption behavior of oxygenated intermediates. Consequently, the optimized CoFe/NSP-HC catalyst exhibits bifunctional activity with an ORR half-wave potential of 0.82 V and an OER overpotential of 260 mV at 10 mA cm–2, delivering a low bifunctional potential gap (ΔE) of 0.67 V. Furthermore, the catalyst demonstrates robust electrochemical durability, maintaining stable ORR/OER performance after prolonged cycling. Density functional theory calculations reveal that Fe–Nx sites and Fe-based interfacial centers provide favorable reaction energetics for oxygen electrocatalysis, while Co species contribute to electronic modulation and kinetic enhancement. When employed as the air cathode in a rechargeable ZAB, CoFe/NSP-HC delivers a peak power density of 158.7 mW cm–2 and long-term cycling stability exceeding 350 h. This work provides an effective strategy for constructing multi-component electrocatalysts with synergistically engineered active sites for advanced metal–air energy storage systems.
- 14 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (37) , 50821-50832
Electrochemical Reduction of CO2 Using a Metal-Free Polymer Catalyst: Synergy of Pyrrole and Quinone Interfacial Sites
The electrocatalytic reduction of CO2 to value-added chemicals leads to a combined solution to address carbon dioxide emission and the demand for sustainable energy storage. Although metal catalysts have dominated and defined a benchmark in the field of electrochemical CO2 reduction (CO2RR), recent research has shifted toward the use of metal-free carbon-based catalysts. The catalytic role of metal-free polymers has remained unexplored, and they are primarily used as interfacial modifiers and electrolytes for CO2RR. The present study bridges a gap in this direction wherein a redox-active, benzoquinone-pyrrole copolymer (BQ-Py) is proposed as a durable, metal-free catalyst for CO2RR. The polymer catalyzes the reduction of CO2 to CO, HCOOH, and H2 over a potential range of –1.4 to –1.8 V vs RHE. Using operando ATR-IR spectroscopy, Raman spectroscopy, and DFT calculations, the reaction pathway to formic acid is confirmed via the formation of the *HCOO intermediate on the C atom adjacent to pyrrolic N. This study highlights the crucial role of various pyrrolic N-environments in the catalyst on product formation and its distribution through different mechanistic pathways during CO2 reduction. It further demonstrates the catalytic competency of pyrrolic-N toward electrochemical CO2 reduction. Preliminary studies reveal the possibility of integrating the polymer catalyst into rechargeable Zn-CO2 batteries.
- 14 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (37) , 50821-50832
Electrochemical Reduction of CO2 Using a Metal-Free Polymer Catalyst: Synergy of Pyrrole and Quinone Interfacial Sites
The electrocatalytic reduction of CO2 to value-added chemicals leads to a combined solution to address carbon dioxide emission and the demand for sustainable energy storage. Although metal catalysts have dominated and defined a benchmark in the field of electrochemical CO2 reduction (CO2RR), recent research has shifted toward the use of metal-free carbon-based catalysts. The catalytic role of metal-free polymers has remained unexplored, and they are primarily used as interfacial modifiers and electrolytes for CO2RR. The present study bridges a gap in this direction wherein a redox-active, benzoquinone-pyrrole copolymer (BQ-Py) is proposed as a durable, metal-free catalyst for CO2RR. The polymer catalyzes the reduction of CO2 to CO, HCOOH, and H2 over a potential range of –1.4 to –1.8 V vs RHE. Using operando ATR-IR spectroscopy, Raman spectroscopy, and DFT calculations, the reaction pathway to formic acid is confirmed via the formation of the *HCOO intermediate on the C atom adjacent to pyrrolic N. This study highlights the crucial role of various pyrrolic N-environments in the catalyst on product formation and its distribution through different mechanistic pathways during CO2 reduction. It further demonstrates the catalytic competency of pyrrolic-N toward electrochemical CO2 reduction. Preliminary studies reveal the possibility of integrating the polymer catalyst into rechargeable Zn-CO2 batteries.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 35787-35799
Sustainable aerobic oxidation of sp 2 and sp 3 functionalized hydrocarbons using CoO x -decorated MgO in the presence of a bio-derived solvent
CoO x -MgO-15 showed excellent catalytic activity for the aerobic epoxidation of broad range of substrates in bio-derived γ-valerolactone (GVL), delivering higher activity and selectivity than conventional non-polar solvents.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 35787-35799
Sustainable aerobic oxidation of sp 2 and sp 3 functionalized hydrocarbons using CoO x -decorated MgO in the presence of a bio-derived solvent
CoO x -MgO-15 showed excellent catalytic activity for the aerobic epoxidation of broad range of substrates in bio-derived γ-valerolactone (GVL), delivering higher activity and selectivity than conventional non-polar solvents.
- 22 August 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 693
Synergistic Bi-functional heterostructured electrocatalysts for energy-efficient alkaline water electrolyzers
- 22 August 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 693
Synergistic Bi-functional heterostructured electrocatalysts for energy-efficient alkaline water electrolyzers
- 6 October 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 507
A single-ion transport interfacial layer for solid-state lithium batteries
- 6 October 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 507
A single-ion transport interfacial layer for solid-state lithium batteries
- 7 January 2024
- Published by Elsevier in Applied Surface Science
- Vol. 652
Skew trapezoidal bipyramidal distortion in MoS6 unit stabilizing distorted phases of 1T-MoS2 single layer
- 7 January 2024
- Published by Elsevier in Applied Surface Science
- Vol. 652
Skew trapezoidal bipyramidal distortion in MoS6 unit stabilizing distorted phases of 1T-MoS2 single layer
Metallic Metastable Hybrid 1T′/1T Phase Triggered Co,P-SnS2 Nanosheets for High Efficiency Trifunctional Electrocatalyst
The development of trifunctional electrocatalyst for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) with deeply understanding the mechanism to enhance the electrochemical performance is still a challenging task. In this work, the distorted metastable hybrid‐phase induced 1T′/1T Co,PSnS2 nanosheets on carbon cloth (1T′/1T Co,PSnS2@CC) is prepared and examined. The density functional theoretical (DFT) calculation suggests that the distorted 1T′/1T Co,PSnS2 can provide excellent conductivity and strong hydrogen adsorption ability. The electronic structure tuning and enhancement mechanism of electrochemical performance are investigated and discussed. The optimal 1T′/1T Co,PSnS2@CC catalyst exhibits low overpotential of ≈94 and 219.7 mV at 10 mA cm−2 for HER and OER, respectively. Remarkably, the catalyst exhibits exceptional ORR activity with small onset potential value (≈0.94 V) and half‐wave potential (≈0.87 V). Most significantly, the 1T′/1T Co,PSnS2||Co,PSnS2 electrolyzer required small cell voltages of ≈1.53, 1.70, and 1.82 V at 10, 100, and 400 mA cm−2, respectively, which are better than those of state‐of‐the‐art Pt‐C||RuO2 (≈1.56 and 1.84 V at 10 and 100 mA cm−2). The present study suggests a new approach for the preparation of large‐scalable, high performance hierarchical 3D next‐generation trifunctional electrocatalysts.
Metallic Metastable Hybrid 1T′/1T Phase Triggered Co,P-SnS2 Nanosheets for High Efficiency Trifunctional Electrocatalyst
The development of trifunctional electrocatalyst for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) with deeply understanding the mechanism to enhance the electrochemical performance is still a challenging task. In this work, the distorted metastable hybrid‐phase induced 1T′/1T Co,PSnS2 nanosheets on carbon cloth (1T′/1T Co,PSnS2@CC) is prepared and examined. The density functional theoretical (DFT) calculation suggests that the distorted 1T′/1T Co,PSnS2 can provide excellent conductivity and strong hydrogen adsorption ability. The electronic structure tuning and enhancement mechanism of electrochemical performance are investigated and discussed. The optimal 1T′/1T Co,PSnS2@CC catalyst exhibits low overpotential of ≈94 and 219.7 mV at 10 mA cm−2 for HER and OER, respectively. Remarkably, the catalyst exhibits exceptional ORR activity with small onset potential value (≈0.94 V) and half‐wave potential (≈0.87 V). Most significantly, the 1T′/1T Co,PSnS2||Co,PSnS2 electrolyzer required small cell voltages of ≈1.53, 1.70, and 1.82 V at 10, 100, and 400 mA cm−2, respectively, which are better than those of state‐of‐the‐art Pt‐C||RuO2 (≈1.56 and 1.84 V at 10 and 100 mA cm−2). The present study suggests a new approach for the preparation of large‐scalable, high performance hierarchical 3D next‐generation trifunctional electrocatalysts.