Xiao-Guang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiao-Guang Yang has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
Chao-Yang Wang
Pennsylvania State University
21 shared publicationsShanhai Ge
Pennsylvania State University
14 shared publications- Chao-Yang Wang
Electrochemical Engine Center (ECEC) and Department of Mechanical Engineering, The Pennsylvania State University, University Park, USA
8 shared publications - Guangsheng Zhang
University of Alabama in Huntsville
8 shared publications - Yongjun Leng
Nanyang Technological University
8 shared publications Ping Cheng
6 shared publications
Latest Publications
- 21 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (17) , 13042-13054
Roll-to-Roll Scalable Manufacturing of Nanoporous Separators for High-Safety Lithium-Ion Batteries
The separator plays an essential role in the electrochemical and safety performance of lithium-ion batteries (LIBs). However, commercial polyolefin separators face challenges such as poor thermal resistance, unsatisfactory electrolyte wettability, and interfacial instability. Herein, we propose a scalable method to fabricate a nanoporous poly(m-phenylene isophthalamide) (PMIA)-modified polyethylene (PE) separator (PMIA@PE) using a nonsolvent and evaporation-induced phase separation technique. Life cycle assessment indicates that this method significantly reduces water consumption during production and has a lower environmental impact compared with the conventional wet method. The separator exhibits superior thermal stability, with shrinkage 0.6Mn0.2Co0.2O2/graphite pouch batteries with PMIA@PE have the highest thermal runaway (TR) trigger temperature, lowest TR peak temperature, and slowest temperature rise rate compared to commercial PE and Al2O3@PE separators. Moreover, PMIA@PE offers better electrolyte affinity and cycling stability without sacrificing specific capacity or rate capability. These high-performance separators and the resulting safe batteries show great promise for addressing TR risks in large-format LIBs for electric vehicles.
- 21 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (17) , 13042-13054
Roll-to-Roll Scalable Manufacturing of Nanoporous Separators for High-Safety Lithium-Ion Batteries
The separator plays an essential role in the electrochemical and safety performance of lithium-ion batteries (LIBs). However, commercial polyolefin separators face challenges such as poor thermal resistance, unsatisfactory electrolyte wettability, and interfacial instability. Herein, we propose a scalable method to fabricate a nanoporous poly(m-phenylene isophthalamide) (PMIA)-modified polyethylene (PE) separator (PMIA@PE) using a nonsolvent and evaporation-induced phase separation technique. Life cycle assessment indicates that this method significantly reduces water consumption during production and has a lower environmental impact compared with the conventional wet method. The separator exhibits superior thermal stability, with shrinkage 0.6Mn0.2Co0.2O2/graphite pouch batteries with PMIA@PE have the highest thermal runaway (TR) trigger temperature, lowest TR peak temperature, and slowest temperature rise rate compared to commercial PE and Al2O3@PE separators. Moreover, PMIA@PE offers better electrolyte affinity and cycling stability without sacrificing specific capacity or rate capability. These high-performance separators and the resulting safe batteries show great promise for addressing TR risks in large-format LIBs for electric vehicles.
- Open Access
A Multiphysics Aging Model for SiOx–Graphite Lithium-Ion Batteries Considering Electrochemical–Thermal–Mechanical–Gaseous Interactions
Silicon oxide/graphite (SiOx/Gr) anodes are promising candidates for high energy-density lithium-ion batteries. However, their complex multiphysics degradation mechanisms pose challenges for accurately interpreting and predicting capacity fade behavior. In particular, existing multiphysics models typically treat gas generation and solid electrolyte interphase (SEI) growth as independent or unidirectionally coupled processes, neglecting their bidirectional interactions. Here, we develop an electro–thermal–mechanical–gaseous coupled model to capture the dominant degradation processes in SiOx/Gr anodes, including SEI growth, gas generation, SEI formation on cracks, and particle fracture. Model validation shows that the proposed framework can accurately reproduce voltage responses under various currents and temperatures, as well as capacity fade under different thermal and mechanical conditions. Based on this validated model, a mechanistic analysis reveals two key findings: (1) Gas generation and SEI growth are bidirectionally coupled. SEI growth induces gas release, while accumulated gas in turn regulates subsequent SEI evolution by promoting SEI formation through hindered mass transfer and suppressing it through reduced active surface area. (2) Crack propagation within particles is jointly governed by the magnitude and duration of stress. High-rate discharges produce large but transient stresses that restrict crack growth, while prolonged stresses at low rates promote crack propagation and more severe structural degradation. This study provides new insights into the coupled degradation mechanisms of SiOx/Gr anodes, offering guidance for performance optimization and structural design to extend battery cycle life.
Open AccessA Multiphysics Aging Model for SiOx–Graphite Lithium-Ion Batteries Considering Electrochemical–Thermal–Mechanical–Gaseous Interactions
Silicon oxide/graphite (SiOx/Gr) anodes are promising candidates for high energy-density lithium-ion batteries. However, their complex multiphysics degradation mechanisms pose challenges for accurately interpreting and predicting capacity fade behavior. In particular, existing multiphysics models typically treat gas generation and solid electrolyte interphase (SEI) growth as independent or unidirectionally coupled processes, neglecting their bidirectional interactions. Here, we develop an electro–thermal–mechanical–gaseous coupled model to capture the dominant degradation processes in SiOx/Gr anodes, including SEI growth, gas generation, SEI formation on cracks, and particle fracture. Model validation shows that the proposed framework can accurately reproduce voltage responses under various currents and temperatures, as well as capacity fade under different thermal and mechanical conditions. Based on this validated model, a mechanistic analysis reveals two key findings: (1) Gas generation and SEI growth are bidirectionally coupled. SEI growth induces gas release, while accumulated gas in turn regulates subsequent SEI evolution by promoting SEI formation through hindered mass transfer and suppressing it through reduced active surface area. (2) Crack propagation within particles is jointly governed by the magnitude and duration of stress. High-rate discharges produce large but transient stresses that restrict crack growth, while prolonged stresses at low rates promote crack propagation and more severe structural degradation. This study provides new insights into the coupled degradation mechanisms of SiOx/Gr anodes, offering guidance for performance optimization and structural design to extend battery cycle life.
- Open Access
- 2 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12749
Study on Influencing Factors of Calendar Aging and Cycle Aging of LFP Batteries
Lithium iron phosphate (LFP) batteries are widely deployed in electric vehicles and large-scale energy storage systems due to their low cost, high safety, and excellent cycling stability. However, long-term operation introduces aging phenomena that critically limit performance and lifetime. In this study, multi-condition calendar and cycle aging tests were performed to elucidate the effects of storage state of charge (SOC), temperature, pressure, and cycling protocols on degradation. The results show that calendar aging is strongly governed by SOC and temperature, with higher SOC and elevated temperature accelerating capacity fade via enhanced SEI growth, while pressure exerts a negligible influence. Notably, under different SOC storage conditions, when the batteries are aged to the same state of health (SOH), the largest increase in Direct Current Resistance (DCR) is observed for the batteries stored at 50% SOC. For cycle aging, degradation is dominated by charging rate, SOC window, and temperature, whereas discharge rate and pressure have only minor effects. High-rate charging at low temperature induces lithium plating and rapid capacity loss, while wider or higher SOC cycling ranges significantly accelerate fade and stress accumulation. Overall, this work systematically identifies the key operational factors shaping LFP battery degradation, clarifies their underlying mechanisms, and provides theoretical guidance for optimizing usage strategies to enhance durability under complex operating conditions.
- 2 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12749
Open AccessStudy on Influencing Factors of Calendar Aging and Cycle Aging of LFP Batteries
Lithium iron phosphate (LFP) batteries are widely deployed in electric vehicles and large-scale energy storage systems due to their low cost, high safety, and excellent cycling stability. However, long-term operation introduces aging phenomena that critically limit performance and lifetime. In this study, multi-condition calendar and cycle aging tests were performed to elucidate the effects of storage state of charge (SOC), temperature, pressure, and cycling protocols on degradation. The results show that calendar aging is strongly governed by SOC and temperature, with higher SOC and elevated temperature accelerating capacity fade via enhanced SEI growth, while pressure exerts a negligible influence. Notably, under different SOC storage conditions, when the batteries are aged to the same state of health (SOH), the largest increase in Direct Current Resistance (DCR) is observed for the batteries stored at 50% SOC. For cycle aging, degradation is dominated by charging rate, SOC window, and temperature, whereas discharge rate and pressure have only minor effects. High-rate charging at low temperature induces lithium plating and rapid capacity loss, while wider or higher SOC cycling ranges significantly accelerate fade and stress accumulation. Overall, this work systematically identifies the key operational factors shaping LFP battery degradation, clarifies their underlying mechanisms, and provides theoretical guidance for optimizing usage strategies to enhance durability under complex operating conditions.
- Open Access
- 26 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12528
Modeling the Coupled Stress Relaxation and SEI Evolution in Preload-Constrained Lithium-Ion Cells
This work investigates the role of preload pressure in governing the electro-chemo-mechanical (ECM) behavior of lithium iron phosphate (LFP)/graphite pouch cells during calendar aging. Cells aged at 60 °C under different preload levels were systematically evaluated through in situ monitoring of force evolution and capacity retention. To interpret these behaviors, a coupled model was developed that integrates solid electrolyte interphase (SEI)-induced electrode expansion, viscoelastic relaxation, and stiffness evolution, and it was validated against multi-rate discharge experiments, showing excellent agreement with measured voltage and force responses. The results reveal that higher preload amplifies internal pressure fluctuations, prolongs viscoelastic relaxation, and delays irreversible force recovery, while the overall capacity fade remains largely unaffected. A slight mitigation in capacity loss is observed at high preload, primarily due to suppressed SEI growth resulting from reduced electrode porosity and a decrease in active surface area available for interfacial reactions. Fitting parameters for stiffness correction, relaxation amplitude, and relaxation time exhibited systematic preload dependence. By decoupling irreversible and relaxation forces, the framework enables quantitative analysis of aging-induced pressure accumulation. Overall, this study underscores the critical role of mechanical constraints in long-term battery degradation and demonstrates the predictive capability of the proposed ECM model for guiding preload design in practical modules.
- 26 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12528
Open AccessModeling the Coupled Stress Relaxation and SEI Evolution in Preload-Constrained Lithium-Ion Cells
This work investigates the role of preload pressure in governing the electro-chemo-mechanical (ECM) behavior of lithium iron phosphate (LFP)/graphite pouch cells during calendar aging. Cells aged at 60 °C under different preload levels were systematically evaluated through in situ monitoring of force evolution and capacity retention. To interpret these behaviors, a coupled model was developed that integrates solid electrolyte interphase (SEI)-induced electrode expansion, viscoelastic relaxation, and stiffness evolution, and it was validated against multi-rate discharge experiments, showing excellent agreement with measured voltage and force responses. The results reveal that higher preload amplifies internal pressure fluctuations, prolongs viscoelastic relaxation, and delays irreversible force recovery, while the overall capacity fade remains largely unaffected. A slight mitigation in capacity loss is observed at high preload, primarily due to suppressed SEI growth resulting from reduced electrode porosity and a decrease in active surface area available for interfacial reactions. Fitting parameters for stiffness correction, relaxation amplitude, and relaxation time exhibited systematic preload dependence. By decoupling irreversible and relaxation forces, the framework enables quantitative analysis of aging-induced pressure accumulation. Overall, this study underscores the critical role of mechanical constraints in long-term battery degradation and demonstrates the predictive capability of the proposed ECM model for guiding preload design in practical modules.
- Open Access
A Multi-Physics Coupled Model for Elucidating Expansion in Si–C Composite Anode Lithium-Ion Batteries
Silicon–carbon (Si–C) composite anodes are a promising pathway to enhance the energy density of lithium-ion batteries (LIBs), yet the substantial volume changes of silicon during (de)lithiation cause mechanical degradation, capacity fading, and safety risks that hinder practical use. To address these challenges, we develop an electrochemical–thermal–mechanical coupled model tailored for LIBs with Si–C anodes. Built upon the Newman pseudo-two-dimensional framework, the multi-scale model integrates particle-, electrode-, and cell-level submodels. Electrochemical–mechanical coupling is captured through intercalation-induced particle expansion and cell-level thermal expansion, while bidirectional electrochemical–thermal coupling is introduced via a lumped thermal model with temperature-dependent electrochemical kinetics. The model is validated against experimental data, accurately reproducing current–voltage profiles, temperature rise, and displacement under various operating conditions. Simulations further reveal the distinct contributions of silicon and graphite: although silicon accounts for only a small fraction of anode mass, it can contribute 30% to the capacity of the cell owing to the high specific capacity of Si. At the same time, while silicon particles undergo volume changes exceeding 300%, the overall cell expansion remains below 7.5% due to structural dilution effects from other components. These findings establish a quantitative link between silicon content, electrochemical behavior, and cell expansion, providing theoretical guidance for the rational design of high-energy-density LIBs.
Open AccessA Multi-Physics Coupled Model for Elucidating Expansion in Si–C Composite Anode Lithium-Ion Batteries
Silicon–carbon (Si–C) composite anodes are a promising pathway to enhance the energy density of lithium-ion batteries (LIBs), yet the substantial volume changes of silicon during (de)lithiation cause mechanical degradation, capacity fading, and safety risks that hinder practical use. To address these challenges, we develop an electrochemical–thermal–mechanical coupled model tailored for LIBs with Si–C anodes. Built upon the Newman pseudo-two-dimensional framework, the multi-scale model integrates particle-, electrode-, and cell-level submodels. Electrochemical–mechanical coupling is captured through intercalation-induced particle expansion and cell-level thermal expansion, while bidirectional electrochemical–thermal coupling is introduced via a lumped thermal model with temperature-dependent electrochemical kinetics. The model is validated against experimental data, accurately reproducing current–voltage profiles, temperature rise, and displacement under various operating conditions. Simulations further reveal the distinct contributions of silicon and graphite: although silicon accounts for only a small fraction of anode mass, it can contribute 30% to the capacity of the cell owing to the high specific capacity of Si. At the same time, while silicon particles undergo volume changes exceeding 300%, the overall cell expansion remains below 7.5% due to structural dilution effects from other components. These findings establish a quantitative link between silicon content, electrochemical behavior, and cell expansion, providing theoretical guidance for the rational design of high-energy-density LIBs.
- Open Access
Expansion Pressure as a Probe for Mechanical Degradation in LiFePO4 Prismatic Batteries
Battery mechanical properties degrade progressively with aging, manifesting as expansion pressure in module-constrained cells. Here, an in situ pressure operating system was developed to replicate the mechanical environment of lithium iron phosphate (LFP) prismatic batteries, enabling long-term monitoring under different loads and temperatures. Coupled with quasi-static compression tests on internal components, stress–strain curves and elasticity moduli were obtained to link microscopic behavior with macroscopic pressure response. Results show that irreversible pressure growth is jointly governed by state of health (SOH) and load: under low-load conditions, irreversible pressure increases nonlinearly with SOH, whereas higher loads yield more linear trends. A multilevel physical model encompassing electrodes, cells, and modules was proposed to explain these behaviors. This model takes into account the influence of external pressure on the modulus of the battery, and indicates that SOH and load influence reversible pressure curves through their effect on modulus. A theoretical method was derived to calculate in-module modulus, confirming its linear correlation with the fluctuation amplitude of reversible pressure. Differential pressure-capacity analysis further demonstrated that characteristic changes in expansion pressure reflect modulus evolution, and deviations from this relationship reveal degradation pathways such as gas generation, solid electrolyte interphase (SEI) growth, or lithium plating. This study establishes pressure signals as mechanistic indicators of modulus evolution and provides a framework for diagnosing mechanical degradation in batteries.
Open AccessExpansion Pressure as a Probe for Mechanical Degradation in LiFePO4 Prismatic Batteries
Battery mechanical properties degrade progressively with aging, manifesting as expansion pressure in module-constrained cells. Here, an in situ pressure operating system was developed to replicate the mechanical environment of lithium iron phosphate (LFP) prismatic batteries, enabling long-term monitoring under different loads and temperatures. Coupled with quasi-static compression tests on internal components, stress–strain curves and elasticity moduli were obtained to link microscopic behavior with macroscopic pressure response. Results show that irreversible pressure growth is jointly governed by state of health (SOH) and load: under low-load conditions, irreversible pressure increases nonlinearly with SOH, whereas higher loads yield more linear trends. A multilevel physical model encompassing electrodes, cells, and modules was proposed to explain these behaviors. This model takes into account the influence of external pressure on the modulus of the battery, and indicates that SOH and load influence reversible pressure curves through their effect on modulus. A theoretical method was derived to calculate in-module modulus, confirming its linear correlation with the fluctuation amplitude of reversible pressure. Differential pressure-capacity analysis further demonstrated that characteristic changes in expansion pressure reflect modulus evolution, and deviations from this relationship reveal degradation pathways such as gas generation, solid electrolyte interphase (SEI) growth, or lithium plating. This study establishes pressure signals as mechanistic indicators of modulus evolution and provides a framework for diagnosing mechanical degradation in batteries.
- 17 September 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (10) , 4995-5002
Thermal–Materials Synergy for Fast-Charging Lithium-Ion Batteries
- 17 September 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (10) , 4995-5002
Thermal–Materials Synergy for Fast-Charging Lithium-Ion Batteries
- 6 April 2025
- Published by Elsevier in Energy Storage Materials
- Vol. 78, 104236
Decoding battery aging in fast-charging electric vehicles: An advanced SOH estimation framework using real-world field data
- 6 April 2025
- Published by Elsevier in Energy Storage Materials
- Vol. 78, 104236
Decoding battery aging in fast-charging electric vehicles: An advanced SOH estimation framework using real-world field data