Igor Mat'Ko

Precision analysis of the key biological metabolites such as L-lactate has great practical importance for many technological processes in food technology, including beverage production. Here we describe a new, highly selective, and sensitive biosensor for accurate L-lactate assay based on a combination of peroxidase-mimetic nanozymes with microbial lactate oxidase (LOx) immobilized onto the surface of a graphite-rod electrode (GE). The peroxidase-like nanozymes were synthesized using the debris of carbon microfibers (CFs) functionalized with hemin (H) and modified with gold nanoparticles (AuNPs) or platinum microparticles (PtMPs). The nanozyme formed with PtMPs as well as corresponding bioelectrodes based on it (LOx-CF-H-PtMPs/GE) is characterized by preferable catalytic and operational characteristics, so it was selected for the analysis of L-lactate content in real samples of grape must and red wine. The results of the L-lactate analysis obtained by the developed biosensors are highly correlated with a very selective spectrophotometric approach used as a reference. The developed biosensor, due to its high selectivity and sensitivity, is very prospective not only for the beverage industry and food technology, but also for clinical diagnostics and medicine, as well as in other applications where the accurate analysis of L-lactate is highly important.

Ice-free phase formed by DMSO acting as a protective layer of lipid membrane.

The correlation between structural properties of Al-rich self-assembled nano-lamellar Al_xTi_1−xN coatings and process parameters used during their chemical vapor deposition (CVD) remains unexplored. For this article, two gradient Al_xTi_1−xN coatings were prepared by a stepwise increase in temperature and pressure in the ranges of 750–860 °C and 1.56 to 4.5 kPa during the depositions at a constant composition of the process gas mixture. The cross-sectional properties of the coatings were analyzed using X-ray nanodiffraction (CSnanoXRD) and electron microscopy. Experimental results indicate that the variation of the process parameters results in changes in microstructure, grain morphology, elastic strain, nanolamellae’s chemistry and bi-layer period. At temperatures of ~750–800 °C and pressures of 2.5–4.5 kPa, preferably cubic nanolamellar grains are formed, whose microstructure correlates with the build-up of tensile stresses, which become relaxed in coating regions filled with nanocrystalline grains. CSnanoXRD superlattice satellite reflections indicate the period of the cubic Al(Ti)N-Ti(Al)N bilayers, which changes from 6.7 to 9 nm due to the temperature increase from 750 to ~810 °C, while it remains nearly unaffected by the pressure variation. In summary, our study documents that CVD process parameters can be used to tune microstructural properties of self-assembled Al_xTi_1−xN nanolamellae as well as the coatings’ grain morphology.

A laboratory in situ grazing-incidence small-angle X-ray scattering (GISAXS) tracking of the self-assembled growth of a regular 3D Ge quantum dot (QD) structure in an amorphous Al₂O₃ matrix during the ion beam sputter deposition of a periodic Ge/Al₂O₃ multilayer on silicon is reported. A 573 K substrate temperature proved to be necessary to achieve the self-assembly effect. Relying on a fast repeated acquisition of GISAXS patterns, the temporal evolution of the growing 3D Ge QD structure was analyzed bilayer by bilayer to determine its type, lateral and vertical correlation lengths, and inter-QD distance. The QD structure was found to have body-centered tetragonal lattice type with ABA stacking, with the lattice parameters refined by fitting the final GISAXS pattern relying on a paracrystal model. A single set of paracrystal parameters enables one to simulate the temporal evolution of the in situ GISAXS patterns throughout the deposition process, suggesting that the Ge QD self-assembly is driven from the very beginning solely by the growing surface morphology. Ex situ GISAXS and X-ray reflectivity measurements along with a cross-section high-resolution transmission electron microscopy analysis complete the study.

Thick InAlN layers (In-molar fraction >0.37) on GaN buffer layers were prepared using a close-coupled showerhead metalorganic chemical vapor deposition (MOCVD) reactor.

Positron annihilation lifetime spectroscopy reveals changes in the DMSO–water microstructure in low concentrations of DMSO (1.8%, 2.0% and 10% v/v) that have a great impact on the cryoprotective effect during the cryopreservation of cells.