Mohammad Ali Rezvani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohammad Ali Rezvani has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Farzad Vesali
6 shared publications- Masoud Mohebbi
School of Railway Engineering, Iran University of Science and Technology 4 , Tehran
6 shared publications - Habibollah Molatefi
School of Railway Engineering, Iran University of Science and Technology, Tehran, Iran
4 shared publications - Robert Arcos
Acoustical and Mechanical Engineering Laboratory, Universitat Politècnica de Catalunya, Terrassa, Spain
4 shared publications - Amin Mazraeh
Department of Railway Rolling Stock, School of Railway Engineering, Iran University of Science and Technology, Tehran, Iran
2 shared publications Markus Hecht
Department of Rail Vehicle, Technical University of Berlin, Berlin, Germany
2 shared publications
Latest Publications
- 11 April 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (5)
The Direct Modal Search Method for Assessing Railroad Overhead Contact Line Wires’ Self-damping and Stiffness
- 11 April 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (5)
The Direct Modal Search Method for Assessing Railroad Overhead Contact Line Wires’ Self-damping and Stiffness
- 12 February 2023
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 12 (1) , 925-940
Attuned Dynamic Response of Double Track Multi-span Railway Bridges Under the Delayed Entry of a Second Train
- 12 February 2023
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 12 (1) , 925-940
Attuned Dynamic Response of Double Track Multi-span Railway Bridges Under the Delayed Entry of a Second Train
- 29 July 2022
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 36 (8) , 3791-3800
Concurrent impact of chipping and pitting damages in a locomotive power transmission system
- 29 July 2022
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 36 (8) , 3791-3800
Concurrent impact of chipping and pitting damages in a locomotive power transmission system
- 22 April 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (15) , 8221-8230
The effect of onboard passengers’ seating arrangement on the vertical ride comfort of a high-speed railway vehicle
This research is concerned with the impact of onboard passengers’ seating arrangement on the carbody flexural vibrations of a high-speed railway vehicle. In this regard, the previously developed passenger body-seat models are used to consider the dynamic influence of the passengers. The carbody is modeled using the Euler–Bernoulli beam model to evaluate its flexural deformation. The frequency-domain analysis demonstrates that the carbody behaves almost like a rigid body when the vehicle is full of passengers. It is established that the passengers' presence causes a 31% enhancement of the ride quality determined based on EN 12299 standard for a fully occupied vehicle compared with an empty car. A scaled model of a ratio of 1:24.5 of the Shinkansen vehicle is constructed for validation purposes. The experimental results exhibit a similar trend as found by the simulations in terms of the impact of the passengers’ distribution on the carbody flexural vibrations.
- 22 April 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (15) , 8221-8230
The effect of onboard passengers’ seating arrangement on the vertical ride comfort of a high-speed railway vehicle
This research is concerned with the impact of onboard passengers’ seating arrangement on the carbody flexural vibrations of a high-speed railway vehicle. In this regard, the previously developed passenger body-seat models are used to consider the dynamic influence of the passengers. The carbody is modeled using the Euler–Bernoulli beam model to evaluate its flexural deformation. The frequency-domain analysis demonstrates that the carbody behaves almost like a rigid body when the vehicle is full of passengers. It is established that the passengers' presence causes a 31% enhancement of the ride quality determined based on EN 12299 standard for a fully occupied vehicle compared with an empty car. A scaled model of a ratio of 1:24.5 of the Shinkansen vehicle is constructed for validation purposes. The experimental results exhibit a similar trend as found by the simulations in terms of the impact of the passengers’ distribution on the carbody flexural vibrations.
- 28 December 2020
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 34 (12) , 4989-5003
Nonlinear impact of traction rod on the dynamics of a high-speed rail vehicle carbody
- 28 December 2020
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 34 (12) , 4989-5003
Nonlinear impact of traction rod on the dynamics of a high-speed rail vehicle carbody
- 26 September 2020
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 27 (21-22) , 2548-2563
A numerical and scaled experimental study on ride comfort enhancement of a high-speed rail vehicle through optimizing traction rod stiffness
In this research, the effect of rail vehicle carbody’s flexural modes on the ride comfort of an example high-speed railway vehicle is investigated. The vehicle is modeled as a rigid multi-body system, where the rigid body vertical, longitudinal, pitch, and roll degrees of freedom of the carbody and bogie frames and the rigid body vertical and roll degrees of freedom of the wheelsets are considered. An Euler–Bernoulli beam theory is used to account for the flexural motion of the carbody. The longitudinal interaction between carbody and bogie through the traction rod is modeled as a nonlinear spring element. The corresponding equations of motion of the system in the frequency domain are obtained by using the equivalent linearization method. The effect of the traction rod is explored by using this model. Also, the optimal stiffness of the traction rod element that minimizes the flexural vibrations of the carbody is obtained through a genetic algorithm. With the optimal stiffness for the traction rod, the ride quality index at the center of the carbody floor is improved by 41% at a speed of 300 km/h. For the validation of numerical results, a scaled model of the vehicle with a scale factor of 24.5 was constructed, and its associated results are presented. The model was excited by random input signals, which were generated based on the power spectral density of the track irregularity function. The agreement between the simulation results and the scaled experimental outcome when compared with the measured data from other sources is found to be satisfactory. In the framework of the physical scaled model, the filtering effect due to the vehicle bogie base is also examined.
- 26 September 2020
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 27 (21-22) , 2548-2563
A numerical and scaled experimental study on ride comfort enhancement of a high-speed rail vehicle through optimizing traction rod stiffness
In this research, the effect of rail vehicle carbody’s flexural modes on the ride comfort of an example high-speed railway vehicle is investigated. The vehicle is modeled as a rigid multi-body system, where the rigid body vertical, longitudinal, pitch, and roll degrees of freedom of the carbody and bogie frames and the rigid body vertical and roll degrees of freedom of the wheelsets are considered. An Euler–Bernoulli beam theory is used to account for the flexural motion of the carbody. The longitudinal interaction between carbody and bogie through the traction rod is modeled as a nonlinear spring element. The corresponding equations of motion of the system in the frequency domain are obtained by using the equivalent linearization method. The effect of the traction rod is explored by using this model. Also, the optimal stiffness of the traction rod element that minimizes the flexural vibrations of the carbody is obtained through a genetic algorithm. With the optimal stiffness for the traction rod, the ride quality index at the center of the carbody floor is improved by 41% at a speed of 300 km/h. For the validation of numerical results, a scaled model of the vehicle with a scale factor of 24.5 was constructed, and its associated results are presented. The model was excited by random input signals, which were generated based on the power spectral density of the track irregularity function. The agreement between the simulation results and the scaled experimental outcome when compared with the measured data from other sources is found to be satisfactory. In the framework of the physical scaled model, the filtering effect due to the vehicle bogie base is also examined.
- 28 February 2020
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 90 (7) , 1475-1496
Simulation of the dynamic interaction of rail vehicle pantograph and catenary through a modal approach
- 28 February 2020
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 90 (7) , 1475-1496
Simulation of the dynamic interaction of rail vehicle pantograph and catenary through a modal approach
- 12 June 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 233 (4) , 979-993
The coupled effects of bending and torsional flexural modes of a high-speed train car body on its vertical ride quality
This study is focused on the effects of bending and torsional flexural modes of the car body on the ride quality index of a high-speed train vehicle. The Euler–Bernoulli beam model is used to extract an analytical model for a high-speed train vehicle car body in order to investigate its bending and torsional flexural vibrations. The rigid model includes a car body, two bogie frames, and four wheelsets such that, each mass has three degrees of freedom including vertical displacement, pitch motion, and roll motion. The results obtained with the proposed analytical model are compared with experimental measurements of the car body response of a Shinkansen high-speed train. Moreover, it is determined that the bending and torsional flexural modes have significant effects on the vertical acceleration of the car body, particularly in the 9–15 Hz frequency range. Furthermore, the ride quality index is calculated according to the EN 12299 standard and it is shown that the faster the train the more affected is the ride quality by the flexural modes. In addition, the effect of coherence between two rail irregularities (the right and the left rails) on the results of the simulation is investigated. The results conclude that if the irregularities are completely correlated the torsional flexural mode of the car body does not appear in the response. Also, the first bending flexural mode in such cases is more excited compared with the partially correlated or uncorrelated rail irregularities. Therefore, the ride quality index in completely correlated cases is higher than other cases.
- 12 June 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 233 (4) , 979-993
The coupled effects of bending and torsional flexural modes of a high-speed train car body on its vertical ride quality
This study is focused on the effects of bending and torsional flexural modes of the car body on the ride quality index of a high-speed train vehicle. The Euler–Bernoulli beam model is used to extract an analytical model for a high-speed train vehicle car body in order to investigate its bending and torsional flexural vibrations. The rigid model includes a car body, two bogie frames, and four wheelsets such that, each mass has three degrees of freedom including vertical displacement, pitch motion, and roll motion. The results obtained with the proposed analytical model are compared with experimental measurements of the car body response of a Shinkansen high-speed train. Moreover, it is determined that the bending and torsional flexural modes have significant effects on the vertical acceleration of the car body, particularly in the 9–15 Hz frequency range. Furthermore, the ride quality index is calculated according to the EN 12299 standard and it is shown that the faster the train the more affected is the ride quality by the flexural modes. In addition, the effect of coherence between two rail irregularities (the right and the left rails) on the results of the simulation is investigated. The results conclude that if the irregularities are completely correlated the torsional flexural mode of the car body does not appear in the response. Also, the first bending flexural mode in such cases is more excited compared with the partially correlated or uncorrelated rail irregularities. Therefore, the ride quality index in completely correlated cases is higher than other cases.
- 10 January 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 233 (9) , 988-999
New control approaches to improve contact quality in the conventional spans and overlap section in a high-speed catenary system
Continuous and quality contact between the pantograph and the catenary system is one of the major challenges for increasing the speed of electric trains. Compared to other studies, this paper has considered the catenary system as the main system and has assumed the pantograph as an excitation factor. Based on this, a controller has been applied on the contact wire, once at the last span and another time near the contact point of the pantograph. Results were compared with the conventional controllers that exert control force on a collector's head. Based on this, two different objectives were considered for the controller including ‘improvement of contact quality’ and ‘minimisation of the vertical velocity of the overlap point’. For this purpose, a full analytical model of the catenary system was presented and was verified using the relevant standards, and then three types of linear quadratic optimal controllers were added to the model with the two objectives mentioned above. The results of the study show that if the model aims to reduce the overlap point vertical velocity, contact quality will be improved. However, in case it aims to enhance contact quality, the velocity of the overlap point will not necessarily be reduced. Moreover, the contact point controller aiming at reducing the overlap point velocity outperforms other controllers and makes 71% improvement in contact quality in comparison with the no-controller case.
- 10 January 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 233 (9) , 988-999
New control approaches to improve contact quality in the conventional spans and overlap section in a high-speed catenary system
Continuous and quality contact between the pantograph and the catenary system is one of the major challenges for increasing the speed of electric trains. Compared to other studies, this paper has considered the catenary system as the main system and has assumed the pantograph as an excitation factor. Based on this, a controller has been applied on the contact wire, once at the last span and another time near the contact point of the pantograph. Results were compared with the conventional controllers that exert control force on a collector's head. Based on this, two different objectives were considered for the controller including ‘improvement of contact quality’ and ‘minimisation of the vertical velocity of the overlap point’. For this purpose, a full analytical model of the catenary system was presented and was verified using the relevant standards, and then three types of linear quadratic optimal controllers were added to the model with the two objectives mentioned above. The results of the study show that if the model aims to reduce the overlap point vertical velocity, contact quality will be improved. However, in case it aims to enhance contact quality, the velocity of the overlap point will not necessarily be reduced. Moreover, the contact point controller aiming at reducing the overlap point velocity outperforms other controllers and makes 71% improvement in contact quality in comparison with the no-controller case.
- 1 January 2019
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 184, 116-127
Analysis of the effects of lateral wind on a high speed train on a double routed railway track with porous shelters
- 1 January 2019
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 184, 116-127
Analysis of the effects of lateral wind on a high speed train on a double routed railway track with porous shelters