Hyeong Soon Moon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hyeong Soon Moon has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Daehyun Baek
6 shared publications- Jin-Hyeong Park
Precision Manufacturing & Control R&D Group, Korea Institute of Industrial Technology, Busan 46938, Korea
3 shared publications - Sang-Hu Park
School of Mechanical Engineering, Pusan National University, Busan, Korea
3 shared publications - Heonmoo Kim2 shared publications
- Bo Wang
School of Mechanical Engineering, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 609-735, Korea
1 shared publication - Cheol Hee Ahn
School of Mechanical Engineering, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 609-735, Korea
1 shared publication
Latest Publications
- Open Access
- 9 April 2026
- Published by Elsevier in Ocean Engineering
- Vol. 357
Robust and optimised sub-component detection using 3D point cloud for shipbuilding sub-assembly automation
- 9 April 2026
- Published by Elsevier in Ocean Engineering
- Vol. 357
Open AccessRobust and optimised sub-component detection using 3D point cloud for shipbuilding sub-assembly automation
- 29 October 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 141 (5-6) , 3445-3469
Design and implementation of orbital welding system for large-diameter pipes
- 29 October 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 141 (5-6) , 3445-3469
Design and implementation of orbital welding system for large-diameter pipes
- 30 June 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (3-4) , 2003-2026
Robust laser vision sensing technology for adaptive weld seam tracking in shipbuilding automation
- 30 June 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (3-4) , 2003-2026
Robust laser vision sensing technology for adaptive weld seam tracking in shipbuilding automation
- 19 December 2023
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 130 (5-6) , 2617-2633
Optimization of weld penetration prediction based on weld pool image and deep learning approach in gas tungsten arc welding
- 19 December 2023
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 130 (5-6) , 2617-2633
Optimization of weld penetration prediction based on weld pool image and deep learning approach in gas tungsten arc welding
- 14 October 2022
- Published by Springer Nature in Journal of Intelligent Manufacturing
- Vol. 35 (1) , 129-145
In-process prediction of weld penetration depth using machine learning-based molten pool extraction technique in tungsten arc welding
- 14 October 2022
- Published by Springer Nature in Journal of Intelligent Manufacturing
- Vol. 35 (1) , 129-145
In-process prediction of weld penetration depth using machine learning-based molten pool extraction technique in tungsten arc welding
- Open Access
- 1 January 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (1) , 324
Advanced Automatic Welding System for Offshore Pipeline System with Seam Tracking Function
Automatic welding technology is a solution to increase welding productivity and improve welding quality in offshore pipe welding. To increase welding productivity, it is necessary to save time during the assembly/disassembly of the guide track from the welding carriage and pipe to move the next station. The guide track consists of a pneumatic system that does not separate the welding carriage, and two welding carriages operate on a half-pipe joint to increase productivity. These welding carriages automatically operate under the controller command. An automatic welding system consists of a DC motor module, a step motor module, a welding control module, a welding monitoring module, and a central control module. The control systems incorporate control modules and transmit commands to each module for an automatic welding system. In order to minimize the inevitable misalignment between the centerline of the welding seam and the welding torch for each welding pass, a moving average algorithm for seam tracking is proposed, which was proven to be suitable for the root pass, filling pass, and cap pass. Welding experiments were also carried out to verify the validity of the weld seam tracking system.
- 1 January 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (1) , 324
Open AccessAdvanced Automatic Welding System for Offshore Pipeline System with Seam Tracking Function
Automatic welding technology is a solution to increase welding productivity and improve welding quality in offshore pipe welding. To increase welding productivity, it is necessary to save time during the assembly/disassembly of the guide track from the welding carriage and pipe to move the next station. The guide track consists of a pneumatic system that does not separate the welding carriage, and two welding carriages operate on a half-pipe joint to increase productivity. These welding carriages automatically operate under the controller command. An automatic welding system consists of a DC motor module, a step motor module, a welding control module, a welding monitoring module, and a central control module. The control systems incorporate control modules and transmit commands to each module for an automatic welding system. In order to minimize the inevitable misalignment between the centerline of the welding seam and the welding torch for each welding pass, a moving average algorithm for seam tracking is proposed, which was proven to be suitable for the root pass, filling pass, and cap pass. Welding experiments were also carried out to verify the validity of the weld seam tracking system.
- Open Access
- 31 October 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (21) , 4626
Influence of Gravity on Molten Pool Behavior and Analysis of Microstructure on Various Welding Positions in Pulsed Gas Metal Arc Welding
This study performed welding on various welding positions in the flat, overhead, and vertical down positions using a pulsed gas metal arc welding (P-GMAW) process. Despite the same amount of heat input on various welding positions, the welding characteristics varied depending on the welding positions. The effect of gravity on the welding process determined the different formation of the weld bead, and the influence of molten pool behavior on various welding positions changed the microstructure in the weld metal. The current and voltage signals were synchronized with a high-speed camera using a data acquisition (DAQ) system. To induce the one pulse one drop (OPOD) process of metal transfer, the shielding gas was used 95% Ar+5% CO2. The microstructure of the weld metal was analyzed in relation to molten pool behavior.
- 31 October 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (21) , 4626
Open AccessInfluence of Gravity on Molten Pool Behavior and Analysis of Microstructure on Various Welding Positions in Pulsed Gas Metal Arc Welding
This study performed welding on various welding positions in the flat, overhead, and vertical down positions using a pulsed gas metal arc welding (P-GMAW) process. Despite the same amount of heat input on various welding positions, the welding characteristics varied depending on the welding positions. The effect of gravity on the welding process determined the different formation of the weld bead, and the influence of molten pool behavior on various welding positions changed the microstructure in the weld metal. The current and voltage signals were synchronized with a high-speed camera using a data acquisition (DAQ) system. To induce the one pulse one drop (OPOD) process of metal transfer, the shielding gas was used 95% Ar+5% CO2. The microstructure of the weld metal was analyzed in relation to molten pool behavior.
- Open Access
- 30 August 2019
- Published by The Korean Welding and Joining Society in Journal of Welding and Joining
- Vol. 37 (4) , 333-338
A Study on the Bead Shape and Changing Material Properties Depending on the Welding Position in P-GMAW
- 30 August 2019
- Published by The Korean Welding and Joining Society in Journal of Welding and Joining
- Vol. 37 (4) , 333-338
Open AccessA Study on the Bead Shape and Changing Material Properties Depending on the Welding Position in P-GMAW