Jalil Shafaei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jalil Shafaei has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Abdollah Hosseini
School of Civil Engineering, College of Engineering University of Tehran Tehran Iran
4 shared publications- Delaram Ostad3 shared publications
Farshid Jandaghi Alaee
3 shared publications- Jason Maxwell Ingham
Department of Civil and Environmental Engineering University of Auckland Auckland New Zealand
3 shared publications Mohammad Shamekhi Amiri
3 shared publications- Seyyed Ahmad Nezami3 shared publications
Latest Publications
- 18 September 2026
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 35 (9) , e70176
Predicting Shear Strength of Exterior RC Beam–Column Joints Using Regression and Machine Learning Models
Accurately predicting the shear strength of exterior reinforced concrete (RC) beam–column joints remains challenging due to the complex interaction of geometric and material parameters and inconsistencies among existing analytical and code‐based models. In this study, a database of 273 experimentally tested specimens was compiled, incorporating 15 structural and material input parameters. Using the full set of 15 inputs, the interaction regression formulation demonstrated the highest prediction accuracy, representing the optimal model under full‐information conditions. To complement this evaluation, eight analytical and code‐based shear strength models were also examined using their respective input variables, resulting in model‐specific reduced datasets. Among these formulations, the Kassem shear strength model, which includes 13 input parameters, achieved the best agreement with experimental results when expressed through a multiplicative regression form, outperforming the remaining seven models. These findings indicate that the interaction formulation is more effective when comprehensive input data are available, whereas the multiplicative Kassem‐based model provides the most reliable predictions among existing analytical and code‐based approaches. Overall, this dual perspective enables more accurate and context‐dependent estimation of shear strength in RC beam–column joints.
- 18 September 2026
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 35 (9) , e70176
Predicting Shear Strength of Exterior RC Beam–Column Joints Using Regression and Machine Learning Models
Accurately predicting the shear strength of exterior reinforced concrete (RC) beam–column joints remains challenging due to the complex interaction of geometric and material parameters and inconsistencies among existing analytical and code‐based models. In this study, a database of 273 experimentally tested specimens was compiled, incorporating 15 structural and material input parameters. Using the full set of 15 inputs, the interaction regression formulation demonstrated the highest prediction accuracy, representing the optimal model under full‐information conditions. To complement this evaluation, eight analytical and code‐based shear strength models were also examined using their respective input variables, resulting in model‐specific reduced datasets. Among these formulations, the Kassem shear strength model, which includes 13 input parameters, achieved the best agreement with experimental results when expressed through a multiplicative regression form, outperforming the remaining seven models. These findings indicate that the interaction formulation is more effective when comprehensive input data are available, whereas the multiplicative Kassem‐based model provides the most reliable predictions among existing analytical and code‐based approaches. Overall, this dual perspective enables more accurate and context‐dependent estimation of shear strength in RC beam–column joints.
- 20 August 2026
- Published by Elsevier in Engineering Failure Analysis
- Vol. 197
Seismic retrofit of RC frames by joint enlargement using prestressed steel angles
- 20 August 2026
- Published by Elsevier in Engineering Failure Analysis
- Vol. 197
Seismic retrofit of RC frames by joint enlargement using prestressed steel angles
- Open Access
- 24 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Prediction of shear strength in exterior reinforced concrete joints using kernel-based Gaussian Regression
A Gaussian Process Regression (GPR) model was developed to predict the shear capacity of exterior reinforced concrete (RC) beam-column joints subjected to seismic loading. The model accounts for key parameters, including beam and column geometry, reinforcement detailing, axial column load, and concrete compressive strength. A database of 273 experimentally tested specimens was used, with emphasis on horizontal joint shear strength. Three kernel structures within the GPR framework-Primary, Rational Second-Order, and Combined kernels-were examined. Model predictions were evaluated against existing shear-strength formulations using deterministic metrics (MAE, RMSE, and R2) and probabilistic measures (NLPD and MSLL). The results show that kernel effectiveness depends on model formulation; however, the Combined kernel exhibited more stable predictions and improved uncertainty calibration for models with higher-dimensional input sets. Sensitivity analysis identified concrete compressive strength, beam depth, and joint transverse reinforcement as dominant variables, followed by column height, axial load ratio, and reinforcement configuration. Overall, the proposed framework enables consistent shear-strength prediction and quantifies the relative influence of geometric and material parameters, contributing to more informed assessment and design of RC beam-column joints.
- 24 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessPrediction of shear strength in exterior reinforced concrete joints using kernel-based Gaussian Regression
A Gaussian Process Regression (GPR) model was developed to predict the shear capacity of exterior reinforced concrete (RC) beam-column joints subjected to seismic loading. The model accounts for key parameters, including beam and column geometry, reinforcement detailing, axial column load, and concrete compressive strength. A database of 273 experimentally tested specimens was used, with emphasis on horizontal joint shear strength. Three kernel structures within the GPR framework-Primary, Rational Second-Order, and Combined kernels-were examined. Model predictions were evaluated against existing shear-strength formulations using deterministic metrics (MAE, RMSE, and R2) and probabilistic measures (NLPD and MSLL). The results show that kernel effectiveness depends on model formulation; however, the Combined kernel exhibited more stable predictions and improved uncertainty calibration for models with higher-dimensional input sets. Sensitivity analysis identified concrete compressive strength, beam depth, and joint transverse reinforcement as dominant variables, followed by column height, axial load ratio, and reinforcement configuration. Overall, the proposed framework enables consistent shear-strength prediction and quantifies the relative influence of geometric and material parameters, contributing to more informed assessment and design of RC beam-column joints.
- 10 May 2026
- Published by Elsevier in Structures
- Vol. 89
Seismic retrofit of RC beam-column joints by the combination of prestressed steel angles and CFRP sheets
- 10 May 2026
- Published by Elsevier in Structures
- Vol. 89
Seismic retrofit of RC beam-column joints by the combination of prestressed steel angles and CFRP sheets
- 25 April 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
Comparative Probabilistic Seismic Performance Assessment of Tall CFT and RC Moment-Resisting Frame Systems under Long-Period Ground Motions
High-rise buildings are significantly vulnerable to long-period ground motions due to resonance effects. This study presents a probabilistic assessment of the seismic vulnerability of two 40-story structural systems, a reinforced concrete moment-resisting frame (RC-MRF) and a concrete-filled steel tube moment-resisting frame (CFT-MRF), using incremental dynamic analysis to develop seismic fragility curves under both long- and short-period ground motions. Multiple damage states are defined according to HAZUS guidelines to capture nonlinear response progression, while nonlinear analyses with Perform-3D provide the basis for quantifying structural performance. The results indicate that for the CFT system, the median seismic fragility at the complete damage state under long-period excitations is nearly 65% lower than under short-period records, highlighting the severe impact of long-period motions on tall-building safety. Furthermore, under long-period excitations, its median fragility is 24% higher than that of the RC-MRF at the complete damage state. Although both systems demonstrate comparable performance at slight and moderate damage levels, the CFT system exhibits superior seismic resilience and energy dissipation capacity at near-collapse states. This enhanced capability results in larger safety margins and a reduced probability of damage. This probabilistic framework enables a quantitative comparison of structural performance under different seismic demands and underscores the importance of considering long-period effects in the performance-based seismic design of high-rise buildings. The study further demonstrates the advantage of CFT systems as a robust solution for mitigating damage and enhancing safety under long-period ground motions.
- 25 April 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
Comparative Probabilistic Seismic Performance Assessment of Tall CFT and RC Moment-Resisting Frame Systems under Long-Period Ground Motions
High-rise buildings are significantly vulnerable to long-period ground motions due to resonance effects. This study presents a probabilistic assessment of the seismic vulnerability of two 40-story structural systems, a reinforced concrete moment-resisting frame (RC-MRF) and a concrete-filled steel tube moment-resisting frame (CFT-MRF), using incremental dynamic analysis to develop seismic fragility curves under both long- and short-period ground motions. Multiple damage states are defined according to HAZUS guidelines to capture nonlinear response progression, while nonlinear analyses with Perform-3D provide the basis for quantifying structural performance. The results indicate that for the CFT system, the median seismic fragility at the complete damage state under long-period excitations is nearly 65% lower than under short-period records, highlighting the severe impact of long-period motions on tall-building safety. Furthermore, under long-period excitations, its median fragility is 24% higher than that of the RC-MRF at the complete damage state. Although both systems demonstrate comparable performance at slight and moderate damage levels, the CFT system exhibits superior seismic resilience and energy dissipation capacity at near-collapse states. This enhanced capability results in larger safety margins and a reduced probability of damage. This probabilistic framework enables a quantitative comparison of structural performance under different seismic demands and underscores the importance of considering long-period effects in the performance-based seismic design of high-rise buildings. The study further demonstrates the advantage of CFT systems as a robust solution for mitigating damage and enhancing safety under long-period ground motions.
- Open Access
- 15 April 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Experimental study on seismic strengthening of hollow clay blocks infilled RC frames under in-plane and out-of-plane loading with (AR) glass-fiber strips
- 15 April 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccessExperimental study on seismic strengthening of hollow clay blocks infilled RC frames under in-plane and out-of-plane loading with (AR) glass-fiber strips
- 21 March 2026
- Published by Elsevier in Structures
- Vol. 87
Bidirectional seismic retrofitting of corner RC beam-column joints by 3D post-tensioned joint enlargement
- 21 March 2026
- Published by Elsevier in Structures
- Vol. 87
Bidirectional seismic retrofitting of corner RC beam-column joints by 3D post-tensioned joint enlargement
- 8 January 2026
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 35 (1)
Experimental Cyclic Evaluation of Exterior RC Beam‐Column Joints With Inadequate Beam Shear Resistance and Short Lap Splices in Columns: Comparison With Seismically Designed Joints
Beam‐column joints are responsible for transferring gravity and lateral loads among the main members of the structure. The failure of beam‐column joints may result in minor or total structure collapse during seismic events. The present study aimed to evaluate the existing weaknesses in buildings designed according to both new and old codes through an experimental program. The absence of transverse reinforcement in connection zones, inadequate lap splices of the column bars, and the failure to adhere to the spacing requirements of transverse bars in the plastic hinge formation area of major structural members included non‐seismic details considered in non‐seismic connections. To assess these weaknesses, four exterior connections, comprising one seismic specimen and three non‐seismic specimens, were evaluated under constant axial load and cyclic load with increasing amplitude. The results showed that due to the seismic details present in the seismic joint, a plastic hinge has formed at the end of the beam. However, the insufficient lap splice of the longitudinal column bars led to a greater concentration of damage of the non‐seismic joint compared to the seismic joint. The lack of transverse reinforcement in the joint area led to the formation of brittle shear failure in this area. Furthermore, the energy dissipated at a drift of 4.5%, and the average ductility factor of the non‐seismic detail specimen has decreased by approximately 43% and 39% compared to the seismic detail specimen, respectively.
- 8 January 2026
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 35 (1)
Experimental Cyclic Evaluation of Exterior RC Beam‐Column Joints With Inadequate Beam Shear Resistance and Short Lap Splices in Columns: Comparison With Seismically Designed Joints
Beam‐column joints are responsible for transferring gravity and lateral loads among the main members of the structure. The failure of beam‐column joints may result in minor or total structure collapse during seismic events. The present study aimed to evaluate the existing weaknesses in buildings designed according to both new and old codes through an experimental program. The absence of transverse reinforcement in connection zones, inadequate lap splices of the column bars, and the failure to adhere to the spacing requirements of transverse bars in the plastic hinge formation area of major structural members included non‐seismic details considered in non‐seismic connections. To assess these weaknesses, four exterior connections, comprising one seismic specimen and three non‐seismic specimens, were evaluated under constant axial load and cyclic load with increasing amplitude. The results showed that due to the seismic details present in the seismic joint, a plastic hinge has formed at the end of the beam. However, the insufficient lap splice of the longitudinal column bars led to a greater concentration of damage of the non‐seismic joint compared to the seismic joint. The lack of transverse reinforcement in the joint area led to the formation of brittle shear failure in this area. Furthermore, the energy dissipated at a drift of 4.5%, and the average ductility factor of the non‐seismic detail specimen has decreased by approximately 43% and 39% compared to the seismic detail specimen, respectively.
- 13 December 2025
- Published by Elsevier in Engineering Structures
- Vol. 350
Seismic retrofit of corner RC beam-column joints by 3D joint enlargement method: Experimental investigation
- 13 December 2025
- Published by Elsevier in Engineering Structures
- Vol. 350
Seismic retrofit of corner RC beam-column joints by 3D joint enlargement method: Experimental investigation