Weinan Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Weinan Xu has a total of 109 co-authors. Here are the top co-authors by number of shared publications:
Muxuan Yang
14 shared publicationsJinyu Bu
School of Polymer Science and Polymer Engineering, The University of Akron, OH 44325, USA
12 shared publicationsNaifu Shen
School of Polymer Science and Polymer Engineering
10 shared publicationsShan Liu
10 shared publications- David H. Gracias
Department of Chemical and Biomolecular Engineering Johns Hopkins University Baltimore MD 21218 USA
9 shared publications - Zhao Qin
Laboratory for Multiscale Material Modelling Syracuse University Syracuse New York USA
4 shared publications
Latest Publications
- Open Access
- 19 March 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (10) , 5106-5117
Concurrent selective laser sintering and graphitization of polyimide microparticles into functional and flexible 3D structures for energy storage and sensing
The synergistic integration of selective laser sintering and laser induced graphitization with polyimide and its hybrid microparticles enables the precise fabrication of 2D/3D patterned and conductive graphene structures.
- 19 March 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (10) , 5106-5117
Open AccessConcurrent selective laser sintering and graphitization of polyimide microparticles into functional and flexible 3D structures for energy storage and sensing
The synergistic integration of selective laser sintering and laser induced graphitization with polyimide and its hybrid microparticles enables the precise fabrication of 2D/3D patterned and conductive graphene structures.
- 3 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (2) , 1037-1046
Phase-Change Polymer–Metal Composites with Tunable Thermal Conductivity and Their Additive Manufacturing
- 3 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (2) , 1037-1046
Phase-Change Polymer–Metal Composites with Tunable Thermal Conductivity and Their Additive Manufacturing
- Open Access
- 7 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 3 (8) , 2391-2401
On-Demand Porous Carbon Fabrication via Selective Laser Sintering for Electrochemical Energy Storage
Manufacturing structured carbon with tunable three-dimensional (3D) architectures remains a major hurdle for widescale use due to process complexity and high cost of current methods. This work demonstrates the fabrication of structured carbon using selective laser sintering (SLS)-based additive manufacturing, enabling control over both the macroscopic geometry and the nanoscale pore textures. Our process employs polyethylene (PE) as the carbon precursor and only involves steps of printing, cross-linking, and pyrolysis. The incomplete coalescence of PE particles during printing results in the formation of a macroporous structure. Moreover, we demonstrate the production of 3D-printed carbon–cobalt nanocomposites through a simple metal immersion step prior to pyrolysis. The electrochemical properties of these structured carbons and carbon–cobalt nanocomposites were investigated, revealing enhanced performance attributed to the synergistic effects of electric double-layer capacitance and pseudocapacitance. Our method is resource-efficient, utilizes inexpensive precursors, and is capable of imparting functional nanoparticles to the carbon matrix. The resulting structured carbon-based electrodes exhibit high charge storage capacity, highlighting their potential for next-generation, 3D-printable electrochemical energy storage devices.
- 7 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 3 (8) , 2391-2401
Open AccessOn-Demand Porous Carbon Fabrication via Selective Laser Sintering for Electrochemical Energy Storage
Manufacturing structured carbon with tunable three-dimensional (3D) architectures remains a major hurdle for widescale use due to process complexity and high cost of current methods. This work demonstrates the fabrication of structured carbon using selective laser sintering (SLS)-based additive manufacturing, enabling control over both the macroscopic geometry and the nanoscale pore textures. Our process employs polyethylene (PE) as the carbon precursor and only involves steps of printing, cross-linking, and pyrolysis. The incomplete coalescence of PE particles during printing results in the formation of a macroporous structure. Moreover, we demonstrate the production of 3D-printed carbon–cobalt nanocomposites through a simple metal immersion step prior to pyrolysis. The electrochemical properties of these structured carbons and carbon–cobalt nanocomposites were investigated, revealing enhanced performance attributed to the synergistic effects of electric double-layer capacitance and pseudocapacitance. Our method is resource-efficient, utilizes inexpensive precursors, and is capable of imparting functional nanoparticles to the carbon matrix. The resulting structured carbon-based electrodes exhibit high charge storage capacity, highlighting their potential for next-generation, 3D-printable electrochemical energy storage devices.
- Open Access
- 28 July 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (38) , 32134-32148
Sustainable thermoplastic elastomer-based nanocomposites and their 3D printing for flexible and stretchable sensors
A series of sustainable polymer nanocomposites that are compatible with pellet-extrusion based 3D printability were developed. These soft and stretchable nanocomposites show unique and sensitive electrical responses to mechanical deformations.
- 28 July 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (38) , 32134-32148
Open AccessSustainable thermoplastic elastomer-based nanocomposites and their 3D printing for flexible and stretchable sensors
A series of sustainable polymer nanocomposites that are compatible with pellet-extrusion based 3D printability were developed. These soft and stretchable nanocomposites show unique and sensitive electrical responses to mechanical deformations.
- Open Access
Plasticized Ionic Liquid Crystal Elastomer Emulsion-Based Polymer Electrolyte for Lithium-Ion Batteries
The development and electrochemical characteristics of ionic liquid crystal elastomers (iLCEs) are described for use as electrolyte components in lithium-ion batteries. The unique combination of elastic and liquid crystal properties in iLCEs grants them robust mechanical attributes and structural ordering. Specifically, the macroscopic alignment of phase-segregated, ordered nanostructures in iLCEs serves as an ion pathway, which can be solidified through photopolymerization to create ion-conductive solid-state polymer lithium batteries (SSPLBs) with high ionic conductivity (1.76 × 10−3 S cm−1 at 30 °C), and a high (0.61) transference number. Additionally, the rubbery state ensures good interfacial contact with electrodes that inhibits lithium dendrite formation. Furthermore, in contrast to liquid electrolytes, the iLCE shrinks upon heating, thus preventing any overheating-related explosions. The Li/LiFePO4 (LFP) cells fabricated using iLCE-based solid electrolytes show excellent cycling stability with a discharge capacity of ~124 mAh g−1 and a coulombic efficiency close to 100%. These results are promising for the practical application of iLCE-based SSPLBs.
Open AccessPlasticized Ionic Liquid Crystal Elastomer Emulsion-Based Polymer Electrolyte for Lithium-Ion Batteries
The development and electrochemical characteristics of ionic liquid crystal elastomers (iLCEs) are described for use as electrolyte components in lithium-ion batteries. The unique combination of elastic and liquid crystal properties in iLCEs grants them robust mechanical attributes and structural ordering. Specifically, the macroscopic alignment of phase-segregated, ordered nanostructures in iLCEs serves as an ion pathway, which can be solidified through photopolymerization to create ion-conductive solid-state polymer lithium batteries (SSPLBs) with high ionic conductivity (1.76 × 10−3 S cm−1 at 30 °C), and a high (0.61) transference number. Additionally, the rubbery state ensures good interfacial contact with electrodes that inhibits lithium dendrite formation. Furthermore, in contrast to liquid electrolytes, the iLCE shrinks upon heating, thus preventing any overheating-related explosions. The Li/LiFePO4 (LFP) cells fabricated using iLCE-based solid electrolytes show excellent cycling stability with a discharge capacity of ~124 mAh g−1 and a coulombic efficiency close to 100%. These results are promising for the practical application of iLCE-based SSPLBs.
- Open Access
- 16 February 2025
- Published by MDPI AG in Preprints.org
Plasticized Ionic Liquid Crystal Elastomer Emulsion Based Polymer Electrolyte for Lithium-Ion Batteries
Development and electrochemical characteristics of ionic liquid crystal elastomers (iLCEs) are described for use as electrolyte components in lithium-ion batteries. The unique combination of elastic and liquid crystal properties in iLCEs grants them robust mechanical attributes and structural ordering. Specifically, the macroscopic alignment of phase-segregated, ordered nanostructures in iLCEs serves as ion pathways, which can be solidified through photopolymerization to create ion-conductive solid-state polymer lithium batteries (SSPLBs) with high ionic conductivity (1.76 × 10-3 S cm-1 at 30 °C), and high (0.61) transference number. Additionally, the rubbery state ensures good interfacial contact with electrodes that inhibits lithium dendrite formation. Furthermore, in contrast to liquid electrolytes, the iLCE is shrinking on heating thus preventing any overheating related explosion. The fabricated Li/LiFePO4 (LFP) cells using iLCE-based solid electrolytes show excellent cycling stability with a discharge capacity of ∼124 mAh g-1 with coulombic efficiency close to 100%. These results are promising for practical application of iLCE-based SSPLBs.
- 16 February 2025
- Published by MDPI AG in Preprints.org
Open AccessPlasticized Ionic Liquid Crystal Elastomer Emulsion Based Polymer Electrolyte for Lithium-Ion Batteries
Development and electrochemical characteristics of ionic liquid crystal elastomers (iLCEs) are described for use as electrolyte components in lithium-ion batteries. The unique combination of elastic and liquid crystal properties in iLCEs grants them robust mechanical attributes and structural ordering. Specifically, the macroscopic alignment of phase-segregated, ordered nanostructures in iLCEs serves as ion pathways, which can be solidified through photopolymerization to create ion-conductive solid-state polymer lithium batteries (SSPLBs) with high ionic conductivity (1.76 × 10-3 S cm-1 at 30 °C), and high (0.61) transference number. Additionally, the rubbery state ensures good interfacial contact with electrodes that inhibits lithium dendrite formation. Furthermore, in contrast to liquid electrolytes, the iLCE is shrinking on heating thus preventing any overheating related explosion. The fabricated Li/LiFePO4 (LFP) cells using iLCE-based solid electrolytes show excellent cycling stability with a discharge capacity of ∼124 mAh g-1 with coulombic efficiency close to 100%. These results are promising for practical application of iLCE-based SSPLBs.
- Open Access
- 25 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (99) , 14703-14716
Soft optical materials based on the integration of perovskite nanostructures and block copolymers
This Highlight article provides an overview and critical summary of recent progress in the creation of perovskite-block copolymer hybrid structures, with a focus on the different roles of copolymers and their interfacial structures with perovskites.
- 25 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (99) , 14703-14716
Open AccessSoft optical materials based on the integration of perovskite nanostructures and block copolymers
This Highlight article provides an overview and critical summary of recent progress in the creation of perovskite-block copolymer hybrid structures, with a focus on the different roles of copolymers and their interfacial structures with perovskites.
- Open Access
- 30 September 2024
- Published by American Chemical Society (ACS) in Chem & Bio Engineering
- Vol. 1 (10) , 876-886
Three-Dimensional Hierarchical Cellulose Structures Based on Microbial Synthesis and Advanced Biofabrication
Cellulose is the most abundant and important biopolymer in our world, and it can also be biosynthesized by certain types of bacteria, such as Komagataeibacter xylinus. However, due to the requirement of oxygen access during such bacterial cellulose (BC) biosynthesis, as well as the high crystallinity and poor processability of BC, it is very challenging to fabricate 3D BC structures with well-defined shape, geometry, and internal structure. In recent years, the rapid progress of polymer additive manufacturing and biofabrication has provided new and versatile approaches for fabricating hierarchical 3D cellulose structures. This can be achieved by either incorporating BC in the 3D printing feedstock or, more interestingly, by incorporating cellulose-generating bacteria in a living ink followed by in situ BC biosynthesis. In this Perspective, we critically examine the potential of various advanced biofabrication technologies in fabricating hierarchical 3D cellulose structures, especially those based on integrating additive manufacturing with in situ microbial biosynthesis. Moreover, sustainable biocomposites based on BC and microbial biosynthesis are also discussed. The current challenges and future opportunities of microbial-biosynthesis-enabled 3D cellulose structures are highlighted. Their applications in tissue engineering, drug delivery, lightweight composites, thermal management, and energy storage are also discussed.
- 30 September 2024
- Published by American Chemical Society (ACS) in Chem & Bio Engineering
- Vol. 1 (10) , 876-886
Open AccessThree-Dimensional Hierarchical Cellulose Structures Based on Microbial Synthesis and Advanced Biofabrication
Cellulose is the most abundant and important biopolymer in our world, and it can also be biosynthesized by certain types of bacteria, such as Komagataeibacter xylinus. However, due to the requirement of oxygen access during such bacterial cellulose (BC) biosynthesis, as well as the high crystallinity and poor processability of BC, it is very challenging to fabricate 3D BC structures with well-defined shape, geometry, and internal structure. In recent years, the rapid progress of polymer additive manufacturing and biofabrication has provided new and versatile approaches for fabricating hierarchical 3D cellulose structures. This can be achieved by either incorporating BC in the 3D printing feedstock or, more interestingly, by incorporating cellulose-generating bacteria in a living ink followed by in situ BC biosynthesis. In this Perspective, we critically examine the potential of various advanced biofabrication technologies in fabricating hierarchical 3D cellulose structures, especially those based on integrating additive manufacturing with in situ microbial biosynthesis. Moreover, sustainable biocomposites based on BC and microbial biosynthesis are also discussed. The current challenges and future opportunities of microbial-biosynthesis-enabled 3D cellulose structures are highlighted. Their applications in tissue engineering, drug delivery, lightweight composites, thermal management, and energy storage are also discussed.
- Open Access
- 26 September 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (3)
Design and Additive Manufacturing of Polyethylene‐Based Hierarchical Composites by Selective Laser Sintering
Selective laser sintering (SLS) is gaining increasing importance in polymer additive manufacturing. It has many unique advantages compared with extrusion or photopolymerization based technologies. However, one of the main challenges for SLS is the limited types of compatible polymer microparticles. This study develops a versatile material platform for the scalable synthesis of polyethylene (PE) and its composite microparticles for SLS 3D printing. The incorporation of metal oxide nanoparticles inside PE microparticles by in situ sol‐gel chemistry as well as blending with carbon black for enhanced laser absorption is found to have significant impacts on the printability and physical properties of printed structures. Importantly, this study also demonstrates that post‐printing processing can substantially enhance the mechanical properties and introduce new functionalities to 3D PE structures. Thermal annealing improves the mechanical strength and modulus by more than ten times. Electrochemical deposition of copper on the 3D PE composite structures significantly enhances the electrical conductivity and mechanical properties, which can be utilized to fabricate 3D hierarchical metallic structures with broad applications.
- 26 September 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (3)
Open AccessDesign and Additive Manufacturing of Polyethylene‐Based Hierarchical Composites by Selective Laser Sintering
Selective laser sintering (SLS) is gaining increasing importance in polymer additive manufacturing. It has many unique advantages compared with extrusion or photopolymerization based technologies. However, one of the main challenges for SLS is the limited types of compatible polymer microparticles. This study develops a versatile material platform for the scalable synthesis of polyethylene (PE) and its composite microparticles for SLS 3D printing. The incorporation of metal oxide nanoparticles inside PE microparticles by in situ sol‐gel chemistry as well as blending with carbon black for enhanced laser absorption is found to have significant impacts on the printability and physical properties of printed structures. Importantly, this study also demonstrates that post‐printing processing can substantially enhance the mechanical properties and introduce new functionalities to 3D PE structures. Thermal annealing improves the mechanical strength and modulus by more than ten times. Electrochemical deposition of copper on the 3D PE composite structures significantly enhances the electrical conductivity and mechanical properties, which can be utilized to fabricate 3D hierarchical metallic structures with broad applications.