Asunción Paloma Cucala
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Asunción Paloma Cucala has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Fernández-Cardador
Institute for Research in Technology, ICAI School of Engineering, Comillas Pontifical University, Madrid, Spain
38 shared publications - Adrián Fernández-Rodríguez
Institute for Research in Technology, ICAI School of Engineering, Comillas Pontifical University, Madrid, Spain
16 shared publications - R. Rodriguez-Pecharroman
Institute for Research in Technology, Comillas Pontifical University, 28049 Madrid, Spain
12 shared publications Antonio Fernández-Cardador
5 shared publicationsÁlvaro J. López-López
5 shared publicationsC. Sicre
4 shared publications
Latest Publications
- Open Access
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 68430-68447
Real-Time Automatic Train Regulation of Metro Lines With Bifurcations and Short-Turning Under Continuous Communication
This paper introduces a novel Real-Time Model Predictive Control (MPC) framework for automatic train regulation in complex metro lines featuring bifurcations, short-turning operations, and continuous communication systems (CBTC or ERTMS), enabling real-time information exchange between trains and control centers for traffic supervision and control. This framework addresses a critical gap in existing approaches: enabling the restoration of nominal operations after moderate disruptions when the line is not limited to a simple or looped infrastructure. The proposed approach operates in two stages: first, a predictive mathematical algorithm generates running-time and dwell-time control actions, balancing timetable adherence and headway regularity subject to topological constraints. Second, these actions are processed by a module that generates real-time automatic driving commands. A key contribution is the incorporation of a granular optimization strategy that enhances energy efficiency while preserving operational performance. The algorithm was validated on a simulation platform based on a real Spanish metro line and, compared to traditional regulation, the results demonstrate a 30.00% improvement in headway adherence and a 7.80% reduction in passenger waiting time in high-demand areas, along with a 10.37% reduction in energy consumption. The computational efficiency of the proposed model confirms its suitability for real-time application in large-scale, complex transit infrastructures.
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 68430-68447
Open AccessReal-Time Automatic Train Regulation of Metro Lines With Bifurcations and Short-Turning Under Continuous Communication
This paper introduces a novel Real-Time Model Predictive Control (MPC) framework for automatic train regulation in complex metro lines featuring bifurcations, short-turning operations, and continuous communication systems (CBTC or ERTMS), enabling real-time information exchange between trains and control centers for traffic supervision and control. This framework addresses a critical gap in existing approaches: enabling the restoration of nominal operations after moderate disruptions when the line is not limited to a simple or looped infrastructure. The proposed approach operates in two stages: first, a predictive mathematical algorithm generates running-time and dwell-time control actions, balancing timetable adherence and headway regularity subject to topological constraints. Second, these actions are processed by a module that generates real-time automatic driving commands. A key contribution is the incorporation of a granular optimization strategy that enhances energy efficiency while preserving operational performance. The algorithm was validated on a simulation platform based on a real Spanish metro line and, compared to traditional regulation, the results demonstrate a 30.00% improvement in headway adherence and a 7.80% reduction in passenger waiting time in high-demand areas, along with a 10.37% reduction in energy consumption. The computational efficiency of the proposed model confirms its suitability for real-time application in large-scale, complex transit infrastructures.
- Open Access
- 18 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 11371
Efficiency and Running Time Robustness in Real Metro Automatic Train Operation Systems: Insights from a Comprehensive Comparative Study
Automatic Train Operation (ATO) systems are widely deployed in metro networks to improve punctuality, service regularity, and ultimately the sustainability of rail operation. Although eco-driving optimisation has been extensively studied, no previous work has provided a systematic, side-by-side comparison of the two ATO control philosophies most commonly implemented in metro systems worldwide: (i) Type 1, based on speed holding followed by a single terminal coasting at a kilometre point, and (ii) Type 2, which uses speed thresholds to apply either continuous speed holding or iterative coasting–remotoring cycles. These strategies differ fundamentally in their control logic and may lead to distinct operational and energetic behaviours. This paper presents a comprehensive comparison of these two ATO philosophies using a high-fidelity train movement simulator and Pareto-front optimisation via a multi-objective particle swarm algorithm. 40 interstations of a real metro line were evaluated under realistic comfort and operational constraints, and robustness was assessed through sensitivity to three different passenger-load variations (empty train, nominal load and full load). Results show that, once nominal profiles are implemented, Type 1 has up to 5% variability in running times, and Type 2 has up to 20% variability in energy consumption. In conclusion, a new ATO deployment combining both strategies could better balance energy efficiency and timetable robustness in metro operations.
- 18 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 11371
Open AccessEfficiency and Running Time Robustness in Real Metro Automatic Train Operation Systems: Insights from a Comprehensive Comparative Study
Automatic Train Operation (ATO) systems are widely deployed in metro networks to improve punctuality, service regularity, and ultimately the sustainability of rail operation. Although eco-driving optimisation has been extensively studied, no previous work has provided a systematic, side-by-side comparison of the two ATO control philosophies most commonly implemented in metro systems worldwide: (i) Type 1, based on speed holding followed by a single terminal coasting at a kilometre point, and (ii) Type 2, which uses speed thresholds to apply either continuous speed holding or iterative coasting–remotoring cycles. These strategies differ fundamentally in their control logic and may lead to distinct operational and energetic behaviours. This paper presents a comprehensive comparison of these two ATO philosophies using a high-fidelity train movement simulator and Pareto-front optimisation via a multi-objective particle swarm algorithm. 40 interstations of a real metro line were evaluated under realistic comfort and operational constraints, and robustness was assessed through sensitivity to three different passenger-load variations (empty train, nominal load and full load). Results show that, once nominal profiles are implemented, Type 1 has up to 5% variability in running times, and Type 2 has up to 20% variability in energy consumption. In conclusion, a new ATO deployment combining both strategies could better balance energy efficiency and timetable robustness in metro operations.
- Open Access
- 14 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 126227-126244
Transport Capacity Maximization in Rail Mass Transit Stations Under Uncertainty
Urban railways play a critical role in promoting sustainable transportation by providing high-capacity, efficient, and low-emission alternatives to road-based travel. As cities continue to grow, the demand for mass transit rail transport is steadily increasing, posing significant challenges to existing infrastructure, particularly at terminal stations, which often become bottlenecks due to their complex operations. Addressing these capacity limitations is essential not only for improving the quality of service but also for supporting the broader goals of urban sustainability. This paper introduces a two-level optimization model designed to maximize the practical transport capacity of mass transit railway stations. At the upper level, a genetic algorithm determines the optimal sequence of train services and platform assignments. These solutions are then evaluated by a linear programming model at the lower level to estimate the resulting transport capacity. For a more realistic assessment of practical capacity, fuzzy modelling is employed to manage uncertainties in train delays and operational variations. The model incorporates critical operational constraints of urban railways, including minimum turn-around times, track occupancy, and constant headways between train services of the same type. A detailed simulation model is used to evaluate route intervals based on train dynamics and signalling systems. Simulation results based on real-world data demonstrate the model’s effectiveness in maximizing capacity under uncertain conditions and different operational schemes, contributing to more efficient and sustainable mass transit railway systems. This research highlights the importance of optimizing rail transport capacity as a key component of sustainable urban development.
- 14 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 126227-126244
Open AccessTransport Capacity Maximization in Rail Mass Transit Stations Under Uncertainty
Urban railways play a critical role in promoting sustainable transportation by providing high-capacity, efficient, and low-emission alternatives to road-based travel. As cities continue to grow, the demand for mass transit rail transport is steadily increasing, posing significant challenges to existing infrastructure, particularly at terminal stations, which often become bottlenecks due to their complex operations. Addressing these capacity limitations is essential not only for improving the quality of service but also for supporting the broader goals of urban sustainability. This paper introduces a two-level optimization model designed to maximize the practical transport capacity of mass transit railway stations. At the upper level, a genetic algorithm determines the optimal sequence of train services and platform assignments. These solutions are then evaluated by a linear programming model at the lower level to estimate the resulting transport capacity. For a more realistic assessment of practical capacity, fuzzy modelling is employed to manage uncertainties in train delays and operational variations. The model incorporates critical operational constraints of urban railways, including minimum turn-around times, track occupancy, and constant headways between train services of the same type. A detailed simulation model is used to evaluate route intervals based on train dynamics and signalling systems. Simulation results based on real-world data demonstrate the model’s effectiveness in maximizing capacity under uncertain conditions and different operational schemes, contributing to more efficient and sustainable mass transit railway systems. This research highlights the importance of optimizing rail transport capacity as a key component of sustainable urban development.
- Open Access
- 12 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 96862-96877
Predictive Traffic Regulation Model for Railway Mass Transit Lines Equipped With Continuous Communication Systems
Centralized traffic regulation systems are crucial in railway mass transit lines to automatically control the trains to recover delays and provide headway regularity. Traditional traffic regulation systems send control action to trains just at stations, through beacons, when they arrive or depart. The present paper proposes a new predictive traffic regulation model for railway mass transit lines equipped with CBTC (Communications Based Train Control) signalling system. This model takes advantage of continuous communications between the centralized control centre and trains, to send control actions at any moment. The proposed regulation system consists of two modules. The first one is a mathematical predictive control algorithm, which generates the running time and dwell time control actions by an optimization model based on the quantified delays of the trains and the operational constraints. The second module receives the control actions (target times) from the first one and generates in real-time the automatic driving commands to be sent to each train. This allows trains to modify their speed profile to speed up or slow down according to updated target times, at any point along their route. Finally, a traffic simulator based on a real Spanish metro line has been developed to verify the effectiveness of the proposed approach. Simulation results under normal operating conditions, considering random delays, show that adherence to the schedule and nominal headway improves by 33% and 49% respectively, and energy consumption is reduced by 5.4%.
- 12 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 96862-96877
Open AccessPredictive Traffic Regulation Model for Railway Mass Transit Lines Equipped With Continuous Communication Systems
Centralized traffic regulation systems are crucial in railway mass transit lines to automatically control the trains to recover delays and provide headway regularity. Traditional traffic regulation systems send control action to trains just at stations, through beacons, when they arrive or depart. The present paper proposes a new predictive traffic regulation model for railway mass transit lines equipped with CBTC (Communications Based Train Control) signalling system. This model takes advantage of continuous communications between the centralized control centre and trains, to send control actions at any moment. The proposed regulation system consists of two modules. The first one is a mathematical predictive control algorithm, which generates the running time and dwell time control actions by an optimization model based on the quantified delays of the trains and the operational constraints. The second module receives the control actions (target times) from the first one and generates in real-time the automatic driving commands to be sent to each train. This allows trains to modify their speed profile to speed up or slow down according to updated target times, at any point along their route. Finally, a traffic simulator based on a real Spanish metro line has been developed to verify the effectiveness of the proposed approach. Simulation results under normal operating conditions, considering random delays, show that adherence to the schedule and nominal headway improves by 33% and 49% respectively, and energy consumption is reduced by 5.4%.
- 4 July 2023
- Published by Springer Nature
- p. 141-168
Energy-Efficient Train Driving Considering Energy Storage Systems
- 4 July 2023
- Published by Springer Nature
- p. 141-168
Energy-Efficient Train Driving Considering Energy Storage Systems
- Open Access
- 7 June 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (12) , 9238
A Two-Level Fuzzy Multi-Objective Design of ATO Driving Commands for Energy-Efficient Operation of Metropolitan Railway Lines
Policies for reducing CO2 and other GHG emissions have motivated an increase in electrification in metropolitan areas, mandating reductions in energy consumption. Metro systems are keystone contributors to the sustainability of cities; they can reduce the energy consumption of cities through the use of the economic driving parameters in their onboard automatic train operation systems (ATO) and through the strategic design of efficient timetables. This paper proposes a two-level optimization method to design efficient, comfortable, and robust driving commands to be programmed in all the interstations of a metro line. This method aims to increase the sustainability of metro operations by producing efficient timetables with economic driving for each interstation while considering comfort restrictions and train mass uncertainty. First, in the eco-driving level, an optimal Pareto front between every pair of successive stations is obtained using a multi-objective particle swarm optimization algorithm with fuzzy parameters (F-MOPSO). This front contains optimized speed profiles for different running times considering train mass variations. The global problem is stated as a multi-objective combinatorial problem, and a fuzzy greedy randomized adaptive search procedure (F-GRASP) is used to perform an intelligent search for the optimal timetables. Thus, a global front of interstation driving commands is computed for the whole line, showing the minimum energy consumption for different travel times. This method is analyzed in a case study with real data from a Spanish metro line. The results are compared with the minimum running time timetable and a typical timetable design procedure. The proposed algorithms achieve a 24% reduction in energy consumption in comparison to the fastest driving commands timetable, representing a 4% increase in energy savings over the uniform timetable design.
- 7 June 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (12) , 9238
Open AccessA Two-Level Fuzzy Multi-Objective Design of ATO Driving Commands for Energy-Efficient Operation of Metropolitan Railway Lines
Policies for reducing CO2 and other GHG emissions have motivated an increase in electrification in metropolitan areas, mandating reductions in energy consumption. Metro systems are keystone contributors to the sustainability of cities; they can reduce the energy consumption of cities through the use of the economic driving parameters in their onboard automatic train operation systems (ATO) and through the strategic design of efficient timetables. This paper proposes a two-level optimization method to design efficient, comfortable, and robust driving commands to be programmed in all the interstations of a metro line. This method aims to increase the sustainability of metro operations by producing efficient timetables with economic driving for each interstation while considering comfort restrictions and train mass uncertainty. First, in the eco-driving level, an optimal Pareto front between every pair of successive stations is obtained using a multi-objective particle swarm optimization algorithm with fuzzy parameters (F-MOPSO). This front contains optimized speed profiles for different running times considering train mass variations. The global problem is stated as a multi-objective combinatorial problem, and a fuzzy greedy randomized adaptive search procedure (F-GRASP) is used to perform an intelligent search for the optimal timetables. Thus, a global front of interstation driving commands is computed for the whole line, showing the minimum energy consumption for different travel times. This method is analyzed in a case study with real data from a Spanish metro line. The results are compared with the minimum running time timetable and a typical timetable design procedure. The proposed algorithms achieve a 24% reduction in energy consumption in comparison to the fastest driving commands timetable, representing a 4% increase in energy savings over the uniform timetable design.
- Open Access
- 14 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (14) , 8645
Eco-Driving in Railway Lines Considering the Uncertainty Associated with Climatological Conditions
Eco-driving is a keystone in energy reduction in railways and a fundamental tool to contribute to the Sustainable Development Goals in the transport sector. However, its results in real applications are subject to uncertainties such as climatological factors that are not considered in the train driving optimisation. This paper aims to develop an eco-driving model to design efficient driving commands considering the uncertainty of climatological conditions. This uncertainty in temperature, pressure, and wind is modelled by means of fuzzy numbers, and the optimisation problem is solved using a Genetic Algorithm with fuzzy parameters making use of an accurate railway simulator. It has been applied to a realistic Spanish high-speed railway scenario, proving the importance of considering the uncertainty of climatological parameters to adapt driving commands to them. The results obtained show that the energy savings expected without considering climatological factors account for 29.76%, but if they are considered, savings can rise up to 34.7% in summer conditions. With the proposed model, a variation in energy of 5.32% is obtained when summer and winter scenarios are compared while punctuality constraints are fulfiled. In conclusion, the model allows the operator to estimate better energy by obtaining optimised driving adapted to the climate.
- 14 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (14) , 8645
Open AccessEco-Driving in Railway Lines Considering the Uncertainty Associated with Climatological Conditions
Eco-driving is a keystone in energy reduction in railways and a fundamental tool to contribute to the Sustainable Development Goals in the transport sector. However, its results in real applications are subject to uncertainties such as climatological factors that are not considered in the train driving optimisation. This paper aims to develop an eco-driving model to design efficient driving commands considering the uncertainty of climatological conditions. This uncertainty in temperature, pressure, and wind is modelled by means of fuzzy numbers, and the optimisation problem is solved using a Genetic Algorithm with fuzzy parameters making use of an accurate railway simulator. It has been applied to a realistic Spanish high-speed railway scenario, proving the importance of considering the uncertainty of climatological parameters to adapt driving commands to them. The results obtained show that the energy savings expected without considering climatological factors account for 29.76%, but if they are considered, savings can rise up to 34.7% in summer conditions. With the proposed model, a variation in energy of 5.32% is obtained when summer and winter scenarios are compared while punctuality constraints are fulfiled. In conclusion, the model allows the operator to estimate better energy by obtaining optimised driving adapted to the climate.
- Open Access
Optimal Location and Sizing of Energy Storage Systems in DC-Electrified Railway Lines Using a Coral Reefs Optimization Algorithm with Substrate Layers
This paper deals with the problem of finding the optimal location and sizing of Energy Storage Systems in DC-electrified railway lines. These devices increment the use of the regenerated energy produced by the trains in the braking phases, as they store the energy to later provide to the catenary the excess of regenerated energy, that otherwise would be lost in the rheostats. However, these infrastructures require a high initial investment that, in some cases, may question their profitability. We propose a multi-method ensemble meta-heuristic to obtain the optimal solution to the problem, with a high level of accuracy. Specifically, the Coral Reefs Optimization with Substrate Layers (CRO-SL) is proposed, an evolutionary-type approach able to run different search procedures within the same population. We will evaluate the performance of the CRO-SL in the problem, and we will show that it performs better than the best known existing meta-heuristics for this problem.
Open AccessOptimal Location and Sizing of Energy Storage Systems in DC-Electrified Railway Lines Using a Coral Reefs Optimization Algorithm with Substrate Layers
This paper deals with the problem of finding the optimal location and sizing of Energy Storage Systems in DC-electrified railway lines. These devices increment the use of the regenerated energy produced by the trains in the braking phases, as they store the energy to later provide to the catenary the excess of regenerated energy, that otherwise would be lost in the rheostats. However, these infrastructures require a high initial investment that, in some cases, may question their profitability. We propose a multi-method ensemble meta-heuristic to obtain the optimal solution to the problem, with a high level of accuracy. Specifically, the Coral Reefs Optimization with Substrate Layers (CRO-SL) is proposed, an evolutionary-type approach able to run different search procedures within the same population. We will evaluate the performance of the CRO-SL in the problem, and we will show that it performs better than the best known existing meta-heuristics for this problem.
- Open Access
- 30 October 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7705
An Eco-Driving Algorithm for Interoperable Automatic Train Operation
The new Automatic Train Operation (ATO) system over the standard European Rail Traffic Management System (ERTMS) will specify the requirements that an automatic train driving system must fulfil in order to be interoperable. The driving is defined by target times located along the journey that are received from the trackside system. Then, the on-board equipment drives the train with the objective of meeting all of the target times. The use of eco-driving methods to calculate the train driving is necessary, as one of the main goals of modern train driving systems is to increase the energy efficiency. This paper presents a simulation-based optimisation algorithm to solve the eco-driving problem constrained by multiple target times. This problem aims to minimize the energy consumption subject to a commercial running time, as the classical eco-driving problem, and also to meet intermediate target times during the journey between stations to enable automatic traffic regulation, especially at junctions. The algorithm proposed combines a Differential Evolution procedure to generate possible solutions with a detailed train simulation model to evaluate them. The use of this algorithm makes possible to find accurate speed profiles that meet the requirements of multiple time objectives. The proposed Differential Evolution algorithm is capable of finding the feasible speed profile with the minimum energy consumption, obtaining a 7.7% of energy variation in the case of a journey with one intermediate target time and 3.1% in the case of two intermediate targets.
- 30 October 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7705
Open AccessAn Eco-Driving Algorithm for Interoperable Automatic Train Operation
The new Automatic Train Operation (ATO) system over the standard European Rail Traffic Management System (ERTMS) will specify the requirements that an automatic train driving system must fulfil in order to be interoperable. The driving is defined by target times located along the journey that are received from the trackside system. Then, the on-board equipment drives the train with the objective of meeting all of the target times. The use of eco-driving methods to calculate the train driving is necessary, as one of the main goals of modern train driving systems is to increase the energy efficiency. This paper presents a simulation-based optimisation algorithm to solve the eco-driving problem constrained by multiple target times. This problem aims to minimize the energy consumption subject to a commercial running time, as the classical eco-driving problem, and also to meet intermediate target times during the journey between stations to enable automatic traffic regulation, especially at junctions. The algorithm proposed combines a Differential Evolution procedure to generate possible solutions with a detailed train simulation model to evaluate them. The use of this algorithm makes possible to find accurate speed profiles that meet the requirements of multiple time objectives. The proposed Differential Evolution algorithm is capable of finding the feasible speed profile with the minimum energy consumption, obtaining a 7.7% of energy variation in the case of a journey with one intermediate target time and 3.1% in the case of two intermediate targets.