PDPetro Deminskyi

Petro Deminskyi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Petro Deminskyi has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    On the dynamics in chemical vapor deposition of InN

    by Chih-Wei Hsu, Petro Deminskyi, Anton Persson, Matts Karlsson, Henrik Pedersen

    Epitaxial nanometer-thin indium nitride (InN) films are considered promising active layers in various device applications but remain challenging to deposit. We compare the morphological evolution and characterizations of InN films with various growth conditions in chemical vapor deposition (CVD) by both a plasma atomic layer deposition (ALD) approach and a conventional metalorganic CVD approach. Our results show that a time-resolved precursor supply is highly beneficial for deposition of smooth and continuous InN nanometer-thin films. The time for purging the reactor between the precursor pulses and low deposition temperature are key factors to achieve homogeneous InN. The gas exchange dynamics of the reactor is further studied using computational fluid dynamics. According to our study, 320 °C is found to be the upper temperature where the dynamics of the deposition chemistry can be controlled to involve only surface reactions with surface species. The results highlight the promising role of the ALD technique in realizing electronic devices based on nanometer-thin InN layers.


  • Area-selective atomic layer deposition of noble metals: Polymerized fluorocarbon layers as effective growth inhibitors

    by Petro Deminskyi, Ali Haider, Hamit Eren, Talha M. Khan, Necmi Biyikli

    The increasingly complex nanoscale three-dimensional and multilayered structures utilized in nanoelectronic, catalytic, and energy conversion/storage devices necessitate novel substrate-selective material deposition approaches featuring bottom-up and self-aligned precision processing. Here, we demonstrate the area-selective atomic layer deposition (AS-ALD) of two noble metals, Pt and Pd, by using a plasma-polymerized fluorocarbon layer as growth inhibition surfaces. The contact angle, x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy measurements were performed to investigate the blocking ability of polymerized fluorocarbon (CFx) layers against ALD-grown metal films. Both Pt and Pd showed significant nucleation delays on fluorocarbon surfaces. Self-aligned film deposition is confirmed using this strategy by growing Pt and Pd on the microscale lithographically patterned CFx/Si samples. CFx blocking layer degradation during ozone exposure was analyzed using XPS measurements, which confirmed the oxygen physisorption as the main responsible surface reaction with further hydroxyl group formation on the CFx surface. Our work reveals that the CFx layer is compatible with an ozone coreactant until the blocking polymer cannot withstand oxygen physisorption. Our results could potentially be used to investigate and develop radical-assisted AS-ALD processes for a wider selection of materials.


  • Surface ligand removal in atomic layer deposition of GaN using triethylgallium

    by Petro Deminskyi, Chih-Wei Hsu, Babak Bakhit, Polla Rouf, Henrik Pedersen

    Gallium nitride (GaN) is one of the most important semiconductor materials in modern electronics. While GaN films are routinely deposited by chemical vapor deposition at around 1000 °C, low-temperature routes for GaN deposition need to be better understood. Herein, we present an atomic layer deposition (ALD) process for GaN-based on triethyl gallium (TEG) and ammonia plasma and show that the process can be improved by adding a reactive pulse, a “B-pulse” between the TEG and ammonia plasma, making it an ABC-type pulsed process. We show that the material quality of the deposited GaN is not affected by the B-pulse, but that the film growth per ALD cycle increases when a B-pulse is added. We suggest that this can be explained by the removal of ethyl ligands from the surface by the B-pulse, enabling a more efficient nitridation by the ammonia plasma. We show that the B-pulsing can be used to enable GaN deposition with a thermal ammonia pulse, albeit of x-ray amorphous films.


  • Open Access

    Direct epitaxial nanometer-thin InN of high structural quality on 4H–SiC by atomic layer deposition

    by Chih-Wei Hsu, Petro Deminskyi, Ivan Martinovic, Ivan G. Ivanov, Justinas Palisaitis, Henrik Pedersen

    Indium nitride (InN) is a highly promising material for high frequency electronics given its low bandgap and high electron mobility. The development of InN-based devices is hampered by the limitations in depositing very thin InN films of high quality. We demonstrate growth of high-structural-quality nanometer thin InN films on 4H–SiC by atomic layer deposition (ALD). High resolution x-ray diffraction and transmission electron microscopy show epitaxial growth and an atomically sharp interface between InN and 4H–SiC. The InN film is fully relaxed already after a few atomic layers and shows a very smooth morphology where the low surface roughness (0.14 nm) is found to reproduce sub-nanometer surface features of the substrate. Raman measurements show an asymmetric broadening caused by grains in the InN film. Our results show the potential of ALD to prepare high-quality nanometer-thin InN films for subsequent formation of heterojunctions.


  • Open Access

    Atomic layer deposition of AlN using trimethylaluminium and ammonia

    by M Beshkova, P Deminskyi, H Pedersen, R Yakimova

    Thin AlN films were grown in a Picosun R-200 atomic layer deposition (ALD) reactor on Si substrates. Trimethylaluminium (TMA) and NH3 were used as precursors; the substrates were cleaned in-situ by H2 and N2 plasma. The surface morphology of the films grown was studied in the temperature range 350 – 450 °C. The films’ crystalline structure was investigated by grazing incidence X-ray diffraction. The AlN films were polycrystalline with a hexagonal wurtzite structure regardless of the substrate temperature. The results of scanning electron microscopy (SEM) revealed nanometer-sized crystallites, with the size increasing from 10 nm to 30 nm as the deposition temperature was increased. The results are promising in view of further studies of the properties of thin AlN films.


  • Open Access

    Area-Selective Atomic Layer Deposition of Noble Metals: Pol-Ymerized Fluorocarbon Layers as Effective Growth Inhibitors

    by Petro Deminskyi, Ali Haider, Hamit Eren, Talha Masood Khan, Necmi Biyikli

    Selective deposition is a powerful self-aligned precision materials processing strategy which can hugely benefit next-generation nanoelectronics, catalysis, and energy conversion/storage fields. Atomic layer deposition (ALD) is showing a significant promise in enabling area-selective deposition using various growth blocking layers including self-assembled monolayers (SAMs) and various polymers. However, these blocking layers are not compatible with energetic co-reactants like ozone and plasma radicals, showing relatively fast degradation and losing their growth inhibition character. In this work, we demonstrate that polymerized fluorocarbon surfaces function as effective growth inhibitors for ALD-grown Pt and Pd films. Besides effectively inhibiting film growth with considerable nucleation delays for, Pt experiments revealed that polymerized CF x layers are also ozone-compatible. To the best of our knowledge, this is the first demonstration of an AS-ALD process using ozone as co-reactant for noble metals. In our manuscript, we detail our observations of (Pt,Pd) film nucleation evolution and self-aligned deposition experiments on patterned samples. We have performed in-depth chemical and surface characterizations along the nucleation studies and self-aligned patterning experiments.

  • Open Access

    Area-Selective Atomic Layer Deposition of Noble Metals: Polymerized Fluorocarbon Layers as Effective Growth Inhibitors

    by Petro Deminskyi, Ali Haider, Hamit Eren, Talha Masood Khan, Necmi Biyikli

    Selective deposition is a powerful self-aligned precision materials processing strategy which can hugely benefit next-generation nanoelectronics, catalysis, and energy conversion/storage fields. Atomic layer deposition (ALD) is showing a significant promise in enabling area-selective deposition using various growth blocking layers including self-assembled monolayers (SAMs) and various polymers. However, these blocking layers are not compatible with energetic co-reactants like ozone and plasma radicals, showing relatively fast degradation and losing their growth inhibition character. In this work, we demonstrate that polymerized fluorocarbon surfaces function as effective growth inhibitors for ALD-grown Pt and Pd films. Besides effectively inhibiting film growth with considerable nucleation delays for, Pt experiments revealed that polymerized CF x layers are also ozone-compatible. To the best of our knowledge, this is the first demonstration of an AS-ALD process using ozone as co-reactant for noble metals. In our manuscript, we detail our observations of (Pt,Pd) film nucleation evolution and self-aligned deposition experiments on patterned samples. We have performed in-depth chemical and surface characterizations along the nucleation studies and self-aligned patterning experiments.

  • Atomic layer deposition of InN using trimethylindium and ammonia plasma

    by Petro Deminskyi, Polla Rouf, Ivan G. Ivanov, Henrik Pedersen

    Indium nitride (InN) is a low bandgap, high electron mobility semiconductor material of interest to optoelectronics and telecommunication. Such applications require the deposition of uniform crystalline InN thin films on large area substrates, with deposition temperatures compatible with this temperature-sensitive material. As conventional chemical vapor deposition (CVD) struggles with the low temperature tolerated by the InN crystal, the authors hypothesize that a time-resolved, surface-controlled CVD route could offer a way forward for InN thin film deposition. In this work, the authors report atomic layer deposition of crystalline, wurtzite InN thin films using trimethylindium and ammonia plasma on Si(100). They found a narrow atomic layer deposition window of 240–260 °C with a deposition rate of 0.36 Å/cycle and that the flow of ammonia into the plasma is an important parameter for the crystalline quality of the film. X-ray diffraction measurements further confirmed the polycrystalline nature of InN thin films. X-ray photoelectron spectroscopy measurements show nearly stoichiometric InN with low carbon level (<1 at. %) and oxygen level (<5 at. %) in the film bulk. The low carbon level is attributed to a favorable surface chemistry enabled by the NH3 plasma. The film bulk oxygen content is attributed to oxidation upon exposure to air via grain boundary diffusion and possibly by formation of oxygen containing species in the plasma discharge.


  • Investigation of native oxide removing from HCPA ALD grown GaN thin films surface utilizing HF solutions

    by Petro Deminskyi, Ali Haider, Necmi Biyikli, Alexander Ovsianitsky, Alexander Tsymbalenko, Dmitry Kotov, Vladyslav Matkivskyi, Nata Liakhova, Vladimir Osinsky

    The paper consider oxygen contamination of HCPA ALD grown GaN films under an air conditioning and during different time duration. High resolution XPS analysis of HCPA ALD grown GaN films after diluted 1:10 HF(41 %): H2O and undiluted HF (41 %) influence on oxygen impurities was investigated. Lesser oxygen impurities have been observed. Better resistivity to oxygen atoms of GaN thin films after diluted HF solution treatment was achieved compared to undiluted HF treatment and without treatment.