TNTayfun Nesimoglu

Tayfun Nesimoglu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tayfun Nesimoglu has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nondestructive Real‐Time Monitoring of Cementitious Mortar Hydration and Fracture Behaviour Using an Embedded Passive Radio‐Frequency Metamaterial Sensor

    by Hamza Saeed, Tayfun Nesimoglu, Abdullah Ekinci, Cumali Sabah

    This study investigates the use of an embedded passive radio‐frequency (RF) metamaterial sensor for real‐time, nondestructive monitoring of cement mortar during early‐age curing and uniaxial compression. The sensor was embedded centrally within a mortar cube and protected by a polyethylene terephthalate isolation layer, and then monitored with a calibrated vector network analyser (VNA) during a 7‐day water‐curing period, followed by mechanical loading. Key electromagnetic features, including resonance frequency ( f r ), quality factor ( Q ) and resonance‐minimum magnitude (| S 11,min |), showed time‐dependent changes consistent with independently measured responses to setting, curing and mechanical loading. Logarithmic models were developed for Q ( t ) and | S 11,min |, enabling the formulation of normalised indices for preliminary assessments, such as candidate demoulding readiness. During compression of the tested specimen, the RF response showed a gradual decrease in resonance depth within the elastic region, increased asymmetry during prepeak loading and significant broadening of the spectrum near peak stress. A tiered alert framework was implemented based on changes in Δ S magnitude and rate, providing advisory, warning and critical flags that aligned with mechanical events. The dominant resonance remained quantitatively trackable through peak and early postpeak loading, whereas the final fracture‐stage response was interpreted qualitatively. These findings demonstrate the feasibility of using an embedded RF metamaterial resonator as a compact proof‐of‐concept approach for monitoring hydration‐related dielectric evolution and load‐associated spectral changes in cementitious materials.

  • A Multi-Box Behavioural Mixer Model and its Validation using Measurements

    by Ali Ozgun, Tayfun Nesimoglu, Simsek Demir

    In this paper, a new behavioural mixer model is introduced. In addition to amplitude nonlinearity; phase nonlinearity and memory effect of the mixer are modelled in a multi-box structure. Each nonlinearity source is modelled in distinct blocks of which cascade connections compose the behavioural mixer model. A test-bed has been constructed including a reference mixer and through measurements, amplitude and phase characteristics of the main tones and IMD products are modelled. The proposed behavioural model delivers a good match between measured and simulation results. The mixer model may be curve fitted to the characteristics of any mixer by optimizing its variable parameters and thus can be used in modelling different types of mixers. Thus, the proposed mixer model may be used in computer simulation tools and in linearization applications.


  • Frequency Modulated Continuous Wave Radar for Range Detection

    by Tolga Kaya, Enes Burak Sahin, Tayfun Nesimoglu

    In this paper, a Frequency Modulated Continuous Wave Radar is built using radio frequency techniques. Radar can measure the nearest object's range from 2 to 30 meters with 1-meter range resolution. The design process was carried out by using computer-aided design techniques, and mathematical tools. The hardware prototype was built and measurements were carried out confirming successful operation of the range detection radar.


  • Microwave Energy Harvesting by Using a Broadband Fractal Antenna and a Dual-Band Rectifier

    by Huriye Ozdemir, Tayfun Nesimoglu

    In this paper, a broadband rectenna for radio frequency (RF) energy harvesting is presented. The proposed rectenna consists of a broadband fractal slot antenna and a voltage doubler rectifier circuit with a novel matching network. First of all, a broadband fractal antenna is proposed, which covers the most frequently encountered frequency bands which are located around 1800 MHz, 2.1 GHz, 2.4 GHz, and 2.45 GHz corresponding to the standards like GSM, UMTS, ISM, and WLAN, respectively. The return loss of the proposed antenna is below -10 dB over the desired frequency bands of the interests. Secondly, a novel dual-band impedance matching technique is employed to a voltage doubler rectifier circuit in order to enhance RF-to-DC conversion efficiency which reaches 45% and up to 72.2% when the input power to the rectifier is -10 dBm and 4 dBm, respectively. Finally, it has been demonstrated that the proposed rectenna is able to harvest RF energy from both GSM-1800 and wireless LAN/Wi-Fi bands. It could be utilized to power-up low-power sensor platforms.

  • Broadband Impedance Transformation by Defected Dielectric on Microstrip Lines

    by Tolga Kaya, Tayfun Nesimoglu

    In this work, a different approach to achieve a desired characteristic impedance value on microstrips is presented. In standard microwave circuits using microstrip lines, the dielectric thickness is same and uniform across the whole circuit. In this paper, it is proposed to modify the dielectric thickness to achieve a certain design goal by creating variations in the characteristic impedance of the microstrip transmission line without changing the width of the line. The proposed approach is applied to a multi-section quarter wave impedance transformer. Simulation and measured results demonstrate the potential of the defected dielectric approach by achieving a much wider bandwidth than a conventional multisection impedance transformer. The proposed idea can be expanded and applied to other microstrip based microwave circuits such as filters, power dividers, hybrid couplers, matching networks, etc.


  • Design of a Multi-Layer Beam-Steering WLAN Antenna

    by Kardelen Yilmaz, Tayfun Nesimoglu

    This paper represents the design of a microstrip patch antenna which is reconfigurable by means of the effect of a pixel grid overlay that is placed at a certain distance from the antenna. In addition to beam steering capability, this article will focus on several important parameters of the aforementioned antenna, such as, the directivity, the gain, radiation pattern and polarization. The antenna consists three main parts; a rectangular microstrip patch antenna that has the operating frequency at around 2.4 GHz, a medium that keeps antenna apart from the pixel grid overlay on distance of coupling and the pixel grid overlay itself. The objective is to design a smart and compact antenna with beam steering capability to improve the power efficiency of transceivers used in WLAN, WiFi and wiles sensor networks. The medium is adjusted to keep two adjacent layers on the coupling distance. The pixel grid overlay is formed by 31 pieces of a hexagonally shaped copper patch grid, each patch on the grid is arranged to be at coupling distance with neighboring patches as well. Besides being cost-effective, practical to apply and easy to produce, the parasitic-layer, has the advantage of ensuring the beam steering ability of the device. It has been also observed to increase the gain of the antenna and affect the radiation pattern.


  • Wideband Quarter Wave Transformer Based on Defected Ground and Split Ring Resonator Structures

    by Yahya Yuksek, Tayfun Nesimoglu

    This article examines a wideband impedance transformer based on a split ring resonator and defected ground structures. The transformer was designed as a 4section binomial one and it provides a transformation from 50 Ω to 100 Ω. Reversed Z” shaped defects are formed on the ground plane of the design in order to increase the bandwidth. The design has been simulated using a 3D electromagnetic simulator which utilizes finite integration technique. Three distinct resonances are exhibited at specific frequency spots as proofs of the concept of impedance matching. Theoretical and simulated results are in a good agreement with each other and the proposed design might be tailored in many microwave circuits and antenna applications.


  • Design and Development of a Low Cost Device for Bone Fracture Detection Using FFT Technique on MATLAB

    by Zakria Qadir, Muhammad Ali, Tayfun Nesimoglu

    Bone fracture is a common problem in daily life which occurs when high pressure is applied on bone or by simple accident and also due to osteoporosis and bone cancer. Different techniques are used today to detect bone fractures such as X-Ray, Computed Tomography (CT-scan), Magnetic Resonance Imaging (MRI) and Ultrasound. Among these four modalities, X-ray diagnosis is commonly used for fracture detection. However, if the fracture is complicated, a CT scan or MRI may be needed for further diagnosis and operation. In this paper, it is intended to make a low-cost portable device for bone fracture detection of patients, having age between 15 to 45 years using sound waves generated by the vibrator of a mobile phone. FFT technique in MATLAB was applied to the generated sound waves to examine the difference between cracked and healthy bone by applying 200 Hz of the sampling frequency. The device will be useful for doctors and public alike since it is portable, practical, mobile and affordable. It must be noted that the proposed device is not intended for a replacement of standard methodologies like X-Ray but rather will serve to be used as an initial detection phase. It is hoped that a negative scan of this device will discount the need for the more costly and time-consuming X-Ray procedure.


  • ZIGBEE Based Time and Energy Efficient Smart Parking System Using IOT

    by Zakria Qadir, Fadi Al-Turjman, Muazzam A. Khan, Tayfun Nesimoglu

    The need of this era is a fully automated vehicle parking system using IOT. The real time notification is made possible by integrating a Micro-controller (Arduino) with a wireless communication system (ZigBee) and is feed to the driver via a smart phone. This technique provides a time and energy efficient way to communicate information between sender and receiver. Additionally, this efficient system provides a better monitoring and control application for shopping malls, restaurants, offices and hospitals. In severe cases, this system will also update crowd capacity information to ambulance service, so that they could easily tackle the situation by adopting the less crowded area towards hospital. The comparison between experimental results of ZigBee with other popular wireless technologies such as Wi-Fi and Bluetooth show that it is more energy efficient. GSM module notifies the driver about the current location of empty parking spaces via SMS or software application. The IR sensors embedded in the parking lots provide the real time scenario to user with all possible details and allowing the easy access to parking lots available, ensuring minimal human interaction.