GSGabriele Seguini

Gabriele Seguini

*This is an algorithmically generated author record based on publicly available information.

Gabriele Seguini has a total of 209 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Al 2 O 3 Ring Array by Infiltration Synthesis in Polystyrene Antidot Template

    by Gabriele Seguini, Alessia Motta, Jacopo Frascaroli, Guido Rademaker, Ahmed Gharbi, Raluca Tiron, Michele Perego, Graziella Tallarida

    The combination of block copolymer (BCP) self‐assembly and a controllable molecular growth process as sequential infiltration synthesis (SIS) is a promising nanofabrication strategy for templating material. The self‐assembly of BCP thin films leads to dense, ordered, organic nanostructures that can be exploited as surface modification layers or as masks for pattern transfer. SIS of inorganic materials into these nanostructured organic templates can originate organic/inorganic hybrids thanks to the selective binding of the metal precursor in the reactive component of the polymeric chains. Upon removal of the polymeric scaffold, the resulting inorganic morphologies mimic those of the self‐assembled BCPs. SIS of TMA and H 2 O precursors in self‐assembled PS‐ b ‐PMMA BCP is the reference system. To expand the library of morphologies pertinent to the BCP phase separation, in this work, a modification of the polymeric template is exploited. SIS is applied on thin films of out of plane cylinder forming PS‐ b ‐PMMA. Prior to SIS, the reactive PMMA component is partially or completely removed, originating in a PS antidot array. The O 2 plasma opening step makes reactive the surface layer of the initially non‐reactive PS antidot array. The hexagonal pattern is still preserved, but the infiltrated nanostructures unfold a peculiar ring‐shaped morphology.

  • Open Access

    Transport characteristics of 2DHG in p-GaN/AlGaN/GaN heterojunctions: the impact of Mg dopant activation

    by Anita Patelli, Gabriele Seguini, Silvia Vangelista, Simona Spadoni, Raffaella Pezzuto, Luisito Livellara, Francesca Milanesi, Paolo Colpani, Michele Perego

    Study on p-GaN/AlGaN: Mg activation depends on the annealing environment and temperature, with N 2 + O 2 being the most effective. The 2DHG at the interface is independent of dopant activation in the p-GaN layer.


  • Open Access

    On the Differences in Trimethylaluminum Infiltration into PMMA and PLA Polymers for Sequential Infiltration Synthesis: Insights from Experiments and First-Principles Simulations

    by Michele Perego, Alessia Motta, Karl Rönnby, Forest Tung Jie Yap, Gabriele Seguini, Claudia Wiemer, Michael Nolan

    Sequential infiltration synthesis (SIS) is a powerful approach for templated growth of solid materials, such as oxides or metals, that exploits the difference in interaction of a precursor molecule with a polymer or block copolymer. While there have been studies showing that infiltration of trimethyl-aluminum (TMA) in polymers can be used to grow Al2O3, there are still many atomic level details of the SIS process that require more investigation, including the origin of the differences in infiltration of TMA into different polymers. In this paper, we investigated in detail the infiltration of Al2O3 into poly­(methyl methacrylate) (PMMA) and poly­(lactic acid) (PLA) experimentally and theoretically. SIS was performed in a standard ALD reactor, operating at 70 °C in quasi-static mode, using TMA and water as the metal and oxygen precursors, respectively. Operando spectroscopic ellipsometry and ex-situ X-ray photoelectron spectroscopy (XPS) evidenced that Al2O3 incorporation in PLA is significantly higher than in PMMA even if, in both cases, TMA incorporation occurs through the formation of an Al–O covalent bond at the C–O–C group. The extent of swelling of the polymers upon TMA infiltration is assessed and is clearly larger for TMA in PLA than in PMMA. First-principles density functional theory (DFT) calculations highlighted that both polymers display swelling upon TMA infiltration, saturating with increasing TMA, consistent with operando ellipsometry observations. The DFT results also show the origin of the larger swelling in PLA compared to TMA. Changes in vibrational modes of carbonyl backbone groups in the polymers are used to demonstrate TMA-polymer interactions from both experiment and simulation. The differences in TMA infiltration and swelling arise from differences in the TMA-polymer C–O–C group interaction, which is more exothermic in PLA than in PMMA, in agreement with experimental results. The combination of experimental and theoretical studies herein reported provides a toolkit to disclose the complexities of SIS at the molecular level.


  • Open Access

    On the differences in trimethylaluminum infiltration into PMMA and PLA polymers for sequential infiltration synthesis: insights from experiment and first principles simulations

    by Michele Perego, Alessia Motta, Karl Ronnby, Forest Tung Jie Yap, Gabriele Seguini, Claudia Wiemer, Michael Nolan

    Sequential infiltration synthesis (SIS) is a powerful approach for templated growth of solid materials such as oxides or metals that exploits the difference in interaction of a precursor molecule with a polymer or block copolymer. While there have been studies showing that infiltration of trimethyl-alumina (TMA) in polymers can be used to grow Al2O3 there are still many atomic level details of the SIS process that require more investigation, including the origin of the differences in infiltration of TMA into different polymers. In this paper, we investigated in detail the Infiltration of Al2O3 into poly (methyl methacrylate) (PMMA) and poly (lactic acid) (PLA) experimentally and theoretically. SIS was performed in a standard ALD reactor, operating at 70°C in quasi-static mode, using TMA and water as the metal and oxygen precursors, respectively. Operando spectroscopic ellipsometry and ex-situ x-ray photoelectron spectroscopy (XPS) evidenced that Al2O3 incorporation in PLA is significantly higher than in PMMA even if, in both cases, TMA incorporation occurs through the formation of an Al-O covalent bond at the C-O-C group. The extent of swelling of the polymers upon TMA infiltration is assessed and is clearly larger for TMA in PLA than in PMMA. First principles density functional theory (DFT) calculations highlighted that both polymers display swelling upon TMA infiltration, saturating with increasing TMA, consistent with operando ellipsometry observations. The DFT results also show the origin of the larger swelling in PLA compared to TMA. Changes in vibrational modes of carbonyl backbone groups in the polymers are used to demonstrate TMA-polymer interactions from both experiment and simulation. The differences in TMA infiltration and swelling arises from differences in the TMA-polymer C-O-C group interaction, which is more exothermic in PLA than in PMMA, in agreement with experimental results. The combination of experimental and theoretical studies herein reported provides a toolkit to disclose the complexities of SIS at the molecular level.


  • Open Access

    Donor incomplete ionization and mobility enhancement in ultra-thin silicon-on-insulator films doped by phosphorus end-terminated polymers

    by Andrea Pulici, Stefano Kuschlan, Gabriele Seguini, Marco De Michielis, Riccardo Chiarcos, Michele Laus, Marco Fanciulli, Michele Perego

    The injection of P atoms is studied confining the same P dose in a progressively thinner silicon-on-insulator film. To account for the incomplete ionization observed in ultra-thin samples, the effect of Si/SiO 2 interfaces must be considered.


  • Sequential Infiltration Synthesis of Al2O3 in PMMA Thin Films: Temperature Investigation by Operando Spectroscopic Ellipsometry

    by Alessia Motta, Gabriele Seguini, Claudia Wiemer, Michele Perego

    Sequential infiltration synthesis (SIS) is a scalable and valuable technique for the synthesis of organic-inorganic materials with several potential applications at the industrial level. Despite the increasing interest for this technique, a clear picture of the fundamental physicochemical phenomena governing the SIS process is still missing. In this work, infiltration of Al2O3 into thin poly(methyl methacrylate) (PMMA) films using trimethyl aluminum (TMA) and H2O as precursors is investigated by operando dynamic spectroscopic ellipsometry (SE) analysis. The TMA diffusion coefficient values at temperatures ranging from 70 to 100 °C are determined, and the activation energy for the TMA diffusion process in PMMA is found to be Ea = 2.51 ± 0.03 eV. Additionally, systematic data about reactivity of TMA molecules with the PMMA matrix as a function of temperature are obtained. These results provide important information, paving the way to the development of a comprehensive theory for the modeling of the SIS process.


  • Open Access

    Al 2 O 3 growth in PMMA thin films by sequential infiltration synthesis: in situ thickness evolution and mass uptake investigation

    by Michele Perego, Gabriele Seguini, Claudia Wiemer, Federica Elvira Caligiore, Elena Cianci

    Nucleation of Al 2 O 3 seeds (I) followed by the formation of an Al 2 O 3 network (II) during the initial stages of sequential infiltration synthesis into a polymer matrix.


  • Nanoscale Periodic Modulation of Doping over Large Areas with Block Copolymer Lithography and Ion Implantation

    by Stefano Kuschlan, Valentina Gianotti, Michele Laus, Francesc Pérez-Murano, Jordi Llobet, Marta Fernandez-Regulez, Caroline Bonafos, Michele Perego, Gabriele Seguini, Marco De Michielis, et al.

    Whenever periodic patterning at the nanoscale over a large surface is required, block-copolymers (BCPs) represent an extremely attractive alternative for lithography1 and nano-templating,2 because of the low cost, if compared to conventional photolithography,3 and the high throughput, if compared to serial lithographic processes, such as electron beam lithography (EBL).4 Despite the relatively simple structure of BCPs, two different linear homopolymers linked to each other at one end by a covalent bond, when annealed above the glass transition temperature, they spontaneously microphase separate generating a variety of periodic nanostructures. The periodicity (L0 ) of the microdomains can be varied in the 10 – 100 nm range by properly adjusting the molecular weight and the interaction parameter of the two blocks.5 In this work, the combination of BCP lithography and ultra-low energy implantation of phosphorus ions at high fluences is investigated to promote a periodic modulation at the nanoscale of the concentration of dopant impurities over the near-surface layer of a silicon substrate. For the fabrication of the masks, two different poly(styrene-b-methyl methacrylate) (PS-b-PMMA) BCPs were used, to obtain two different geometries: the first with out of plane hexagonally packed PMMA cylinders, with an average diameter of 22 nm and center-to-center distance of 35 nm (Figure 1A) , and the second with out of plane lamellae having a periodicity of 28 nm (Figure 1B). The thickness of the BCP films was 35 nm thick. In addition, a graphoepitaxy protocol was implemented to obtain different sets of perfectly aligned 20 μm long parallel lamellae. A mesoporous soft mask can be readily obtianed by selective removal of PMMA cylinders with UV light and acetic acid. Conversely, a different process is required to avoid the collapse of the PS lamellae. Using Sequential Infiltration Synthesis (SIS),6 Al2O3 is incorporate into the PMMA phase of the BCP film. Upon the removal of the organic material by a mild O2 plasma cleaning, a nanostructured Al2O3 layer, that perfectly matches the PMMA pattern, remains on the substrate (Figure 1B). Phosphorus ions were implanted through the soft masks into the Si substrate operating at ultra-low energy (3 keV) to prevent the degradation of the polymeric film and reduce P penetration (10 nm) into the Si substrate. Additionally, high implantation doses are considered, to induce local amorphization of the silicon substrate. In this way Solid Phase Epitaxial Regrowth (SPER) can be exploited to recover the crystallinity of the substrate by thermal treatments at relatively low temperatures.7 During the SPER process the phosphorus atoms are substitutionally incorporated into the silicon lattice preserving their spatial confinement. AFM morphological analysis and ToF-SIMS depth profiling of the mask confirm the capability of the PS and alumina matrix to properly shield the low energy phosphorus ions in the dose range under investigation. AFM and ToF-SIMS characterization of the samples upon removal of the mesoporous template demonstrated that the P ions were effectively implanted into the Si substrate through the mask, leading to localized implantation (Figure 1C - 1E). Raman spectra suggested the presence of a thin layer of amorphous Si in the implanted samples and subsequent recrystallization after the annealing. By specific SPM measurements, it was possible to compare the morphology, the map of surface potential and the map of conductivity of the samples. The analysis of the Si surface after implantation through the mask with cylindrical pores and activation of the P is reported (Figure 1F, 1G). Small variations of the surface potential that perfectly match the implanted regions were obtained, suggesting a local modification of the electrical properties of Si. This result is also supported by conductivity measurements and finite element method (FEM) simulations. Further results will be presented, to investigate the electrical properties of the samples as a function of the implanted P dose and of the geometry of the mask. (1) Feng, H. et al., Nat. Mater. 21, 1426–1433 (2022). (2) Chai, J. & Buriak, J. M., ACS Nano 2, 489–501 (2008). (3) Levinson, H. J., Jpn. J. Appl. Phys. 61, (2022). (4) Yang, X. M. et al., ACS Nano 3, 1844–1858 (2009). (5) Seguini, G. et al. Soft Matter 16, 5525–5533 (2020). (6) Tseng, Y. C. et al. J. Phys. Chem. C 115, 17725–17729 (2011). (7) Luce, F. P. et al., Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. with Mater. Atoms 370, 14–18 (2016). Figure 1

  • Electrical Characterization of Ultra-Thin Silicon-on-Insulator Films Doped By Means of Phosphorus End-Terminated Polymers

    by Andrea Pulici, Stefano Kuschlan, Gabriele Seguini, Fabiana Taglietti, Marco Fanciulli, Riccardo Chiarcos, Michele Laus, Michele Perego

    Starting at the 3 nm node, the microelectronics industry is anticipated to transition toward new stacked device architectures, such as gate-all-around field-effect transistors (GAAFETs). In GAAFETs, the gate completely surrounds a silicon nanosheet that serves as a channel, improving the control of the current and performances. The introduction of ultra-scaled stacked 3D devices posed new technological and fundamental problems. In particular, doping techniques commonly used in the mass production of advanced transistors, such as ion implantation or diffusion, present some limitations when applied to these 3D structures. Perego et al.[1] suggested the use of dopant end-terminated polymers as a mild and simple alternative approach to achieve semiconductor doping. Considering the current trend in ultra-scaled microelectronic devices, exploitation of this doping technology requires the demonstration of the possibility to dope thin silicon membranes, achieving a uniform doping concentration throughout the entire film and optimized electrical properties. In this work, ex-situ doping of silicon-on-insulator (SOI) substrates, with device layer thickness ranging from 6 to 70 nm, is performed by using poly(methylmetachrylate) polymers end-terminated with a P containing moiety (PMMA-P), following a procedure described in our previous works.[1,2] Accordingly, a phosphorus δ-layer is created at the interface between a SiO2 capping layer and the underlying Si device layer. Drive-in of the P atoms is performed by annealing the samples in a RTP system at temperatures ranging from 900 to 1200 °C in N2 atmosphere. Annealing time is selected to inject a constant P dose of ∼ 1 x 1013 cm-2 into the SOI substrate, achieving a uniform dopant concentration, as verified by ToF-SIMS measurements. Sample resistivity (ρ), carrier concentration (ne ) and mobility (μ) are determined through sheet resistance and Hall measurements in van der Pauw configuration. Figure 1 shows the results of the electrical and compositional measurements obtained on SOI samples with 30 nm thick device layer as a function of the drive-in temperature. An average activation rate (ηa) above 95% is observed at room temperature in the samples annealed at 1000 °C, indicating full activation of the injected dopants. In the temperature range considered, the mobility is almost constant and is perfectly compatible with values reported in the literature for bulk Si,[3]as shown in the inset. Moreover, the low temperature (5-300 K) electrical characterization indicates that the evolution of ρ, ne and μ values with temperature is consistent with those reported for a P doped bulk Si.[3] Figure 2 shows the results of the electrical and compositional measurements obtained on SOI samples with device layer thickness ranging from 6 to 70 nm upon drive-in of the P dopants at 1000 °C for 100 s. When decreasing the thickness of the device layer, P concentration progressively increases above 1019 atoms/cm3, suggesting that the capping SiO2 film and the buried oxide act as diffusion barrier for P atoms injected into the device layer. ηa well above 80% are achieved for the SOI substrates with device layer thickness greater than 10 nm. However, ηa drops below 10% when further decreasing the thickness of the device layer. A similar reduction of the activation rates was observed in silicon nanowires by Bj ö rk et al.[4] Interestingly, in extremely-thin SOI samples, donor deactivation is correlated to an increase in electron mobility with computed values even greater than those reported for a bulk Si[3], as shown in the inset of Figure 2. Figure 3 shows the relative electron mobility variation as a function of the ratio between the thickness and the average distance between donors for SOI samples annealed at 900 and 1000 °C. The computed values are perfectly compatible with those reported by Kadotani et al.[5] Their model suggests that the enhanced electron mobility observed in heavily doped extremely-thin SOI is caused by the transition from 3D to almost 2D conduction, which results in the reduction of the Coulomb scattering due to the lower number of neighbor donor ions. In conclusion, an experimental study of the doping of ultra-thin SOI by means of phosphorus end-terminated polymers, demonstrates effective doping of silicon with extremely high activation rates of the dopants. Significant deactivation of P atoms and extremely high electron mobility are observed when decreasing the thickness of the device layer below 20 nm where bulk conducting properties transitioned to confinement related phenomena. [1] M.Perego et al., ACS Nano 12 (2018) 178-186. [2] M.Perego et al., J.Mater.Chem.C 8 (2020) 10229-10237. [3] S.M.Sze, K.K.Ng, Physics of Semiconductor Devices (2006) 5-75. [4] M.T.Björk et al., Nature Nanotechnology 4 (2009) 103-107. [5] N.Kadotani et al., Journal of Applied Physics 110 (2011) 034502. Figure 1

  • Open Access

    Periodic Arrays of Dopants in Silicon by Ultralow Energy Implantation of Phosphorus Ions through a Block Copolymer Thin Film

    by Stefano Kuschlan, Riccardo Chiarcos, Michele Laus, Francesc Pérez-Murano, Jordi Llobet, Marta Fernandez-Regulez, Caroline Bonafos, Michele Perego, Gabriele Seguini, Marco De Michielis, et al.

    In this work, block copolymer lithography and ultralowenergy ionimplantation are combined to obtain nanovolumes with high concentrationsof phosphorus atoms periodically disposed over a macroscopic areain a p-type silicon substrate. The high dose of implanted dopantsgrants a local amorphization of the silicon substrate. In this condition,phosphorus is activated by solid phase epitaxial regrowth (SPER) ofthe implanted region with a relatively low temperature thermal treatmentpreventing diffusion of phosphorus atoms and preserving their spatiallocalization. Surface morphology of the sample (AFM, SEM), crystallinityof the silicon substrate (UV Raman), and position of the phosphorusatoms (STEM- EDX, ToF-SIMS) are monitored during the process. Electrostaticpotential (KPFM) and the conductivity (C-AFM) maps of the sample surfaceupon dopant activation are compatible with simulated I-V characteristics, suggesting the presenceof an array of not ideal but working p-n nanojunctions. Theproposed approach paves the way for further investigations on thepossibility to modulate the dopant distribution within a silicon substrateat the nanoscale by changing the characteristic dimension of the self-assembledBCP film.