Salih Yanikgonul
Research Subjects
Research Interests
Salih Yanikgonul has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Victor Leong
Institute of Materials Research and Engineering (IMRE) Agency for Science, Technology and Research (A*STAR) National Quantum Federated Foundry (NQFF) 2 Fusionopolis Way Innovis #08-03 138634 Singapore Republic of Singapore
4 shared publications - Angelos Xomalis
Norwegian University of Science and Technology
3 shared publications - Cesare Soci
Centre for Disruptive Photonic Technologies, The Photonics Institute, Nanyang Technological University, Singapore, Singapore
3 shared publications - Jun Rong Ong
Institute of High Performance Computing, Agency for Science, Technology and Research (A*STAR), Singapore
3 shared publications Leonid Krivitsky
Institute of Materials Research and Engineering, Agency for Science, Technology and Research, Singapore
3 shared publicationsRuixiang Guo
3 shared publications
Latest Publications
- 14 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (3) , 1062-1074
Foundry's Perspective on Laser and SOA Module Integration With Silicon Photonics
Silicon photonic integrated circuit (PIC) builds on the demand for a low cost PIC approach from established silicon-based manufacturing infrastructure traditionally built for electronics. Besides its natural abundance, silicon has desirable properties such as optically low loss (at certain critical wavelengths), and small form factor to enable high density scaled-up optical on-chip circuitry. However, given that silicon is an indirect bandgap material, the platform is typically integrated with other direct bandgap (e.g., III-V semiconductor) platforms for on-chip light source. An effective solution to integrating light source onto silicon photonics platform is integral to a practical scaled-up and full-fledged integrated photonics implementation. Here, we discuss the integration solutions, and present our foundry's perspective toward realizing it.
- 14 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (3) , 1062-1074
Foundry's Perspective on Laser and SOA Module Integration With Silicon Photonics
Silicon photonic integrated circuit (PIC) builds on the demand for a low cost PIC approach from established silicon-based manufacturing infrastructure traditionally built for electronics. Besides its natural abundance, silicon has desirable properties such as optically low loss (at certain critical wavelengths), and small form factor to enable high density scaled-up optical on-chip circuitry. However, given that silicon is an indirect bandgap material, the platform is typically integrated with other direct bandgap (e.g., III-V semiconductor) platforms for on-chip light source. An effective solution to integrating light source onto silicon photonics platform is integral to a practical scaled-up and full-fledged integrated photonics implementation. Here, we discuss the integration solutions, and present our foundry's perspective toward realizing it.
- Open Access
- 23 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (8) , 2443-2450
Visible-Light Integrated PIN Avalanche Photodetectors With High Responsivity and Bandwidth
Integrated photodetectors are key building blocks of scalable photonics platforms. Many recent improvements have been made for integrated avalanche photodetectors (APDs) operating at infrared telecommunications wavelengths, but their visible-spectrum counterparts remain relatively unexplored. Here, we demonstrate PIN-doped silicon APDs for visible light detection, monolithically integrated with a silicon nitride photonics circuit via end-fire coupling. An in-depth study of multiple PIN doping profiles reveals different optimal designs based on the desired operating regimes. At −49 dBm input power, they show 0.25 A/W (0.8 A/W) responsivity at reverse bias as low as 0.5 V (5.5 V), with corresponding dark current of $< $ 3 pA (50 pA). We also report fast RF response with an optimal 3 dB bandwidth of 11 GHz and gain-bandwidth product of 142 GHz, with all devices yielding open eye diagrams at 25 Gbps or above. Coupled with CMOS-compatible fabrication, our APDs will enable scalable photonics applications in sensing, communications, and quantum technologies at visible wavelengths.
- 23 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (8) , 2443-2450
Open AccessVisible-Light Integrated PIN Avalanche Photodetectors With High Responsivity and Bandwidth
Integrated photodetectors are key building blocks of scalable photonics platforms. Many recent improvements have been made for integrated avalanche photodetectors (APDs) operating at infrared telecommunications wavelengths, but their visible-spectrum counterparts remain relatively unexplored. Here, we demonstrate PIN-doped silicon APDs for visible light detection, monolithically integrated with a silicon nitride photonics circuit via end-fire coupling. An in-depth study of multiple PIN doping profiles reveals different optimal designs based on the desired operating regimes. At −49 dBm input power, they show 0.25 A/W (0.8 A/W) responsivity at reverse bias as low as 0.5 V (5.5 V), with corresponding dark current of $< $ 3 pA (50 pA). We also report fast RF response with an optimal 3 dB bandwidth of 11 GHz and gain-bandwidth product of 142 GHz, with all devices yielding open eye diagrams at 25 Gbps or above. Coupled with CMOS-compatible fabrication, our APDs will enable scalable photonics applications in sensing, communications, and quantum technologies at visible wavelengths.
- 29 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (6) , 1811-1819
High-Speed Waveguide-Integrated Avalanche Photodiodes for Near-Infrared Wavelengths on SiN-on-SOI Photonic Platform
Recently, there have been efforts on developing monolithically integrated avalanche photodiodes (APDs) for visible and near-infrared (NIR) wavelengths. However, the fabrication of these detectors in commercial photonic foundries often requires custom integration flow due to many design rule violations in standard integration process. This increases the fabrication cost, hinders the use of highly robust integration platform, and prevents access to well-mature process design kits. Here, we report on waveguide-integrated APDs operating at 850 nm by utilizing a commercial silicon nitride-on-silicon-on-insulator (SiN-on-SOI) photonics platform with no process modifications. Our devices comprise a SiN waveguide for input light routing and an SOI layer underneath to form APDs. We examine the effect of different junction parameters and device length on DC and high-speed device performance. We demonstrate high gain-bandwidth product up to 120 GHz with low dark current of $<$ 25 nA and high responsivity that can reach 0.71 A/W, and observe open eye diagrams at up to 40 Gbps for all device variations. The performance parameters are on-par or even superior when compared to other integrated APDs operating in the NIR wavelengths. Being compatible with the standard integration flow of a multi-project wafer service of a commercial foundry, our devices are readily accessible, and they expand the functionalities of well-mature SiN-on-SOI photonics platform for applications ranging from optical interconnects, LIDAR, visible light communication to biosensing and quantum applications.
- 29 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (6) , 1811-1819
High-Speed Waveguide-Integrated Avalanche Photodiodes for Near-Infrared Wavelengths on SiN-on-SOI Photonic Platform
Recently, there have been efforts on developing monolithically integrated avalanche photodiodes (APDs) for visible and near-infrared (NIR) wavelengths. However, the fabrication of these detectors in commercial photonic foundries often requires custom integration flow due to many design rule violations in standard integration process. This increases the fabrication cost, hinders the use of highly robust integration platform, and prevents access to well-mature process design kits. Here, we report on waveguide-integrated APDs operating at 850 nm by utilizing a commercial silicon nitride-on-silicon-on-insulator (SiN-on-SOI) photonics platform with no process modifications. Our devices comprise a SiN waveguide for input light routing and an SOI layer underneath to form APDs. We examine the effect of different junction parameters and device length on DC and high-speed device performance. We demonstrate high gain-bandwidth product up to 120 GHz with low dark current of $<$ 25 nA and high responsivity that can reach 0.71 A/W, and observe open eye diagrams at up to 40 Gbps for all device variations. The performance parameters are on-par or even superior when compared to other integrated APDs operating in the NIR wavelengths. Being compatible with the standard integration flow of a multi-project wafer service of a commercial foundry, our devices are readily accessible, and they expand the functionalities of well-mature SiN-on-SOI photonics platform for applications ranging from optical interconnects, LIDAR, visible light communication to biosensing and quantum applications.
- Open Access
- 23 March 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-8
Integrated avalanche photodetectors for visible light
Integrated photodetectors are essential components of scalable photonics platforms for quantum and classical applications. However, most efforts in the development of such devices to date have been focused on infrared telecommunications wavelengths. Here, we report the first monolithically integrated avalanche photodetector (APD) for visible light. Our devices are based on a doped silicon rib waveguide with a novel end-fire input coupling to a silicon nitride waveguide. We demonstrate a high gain-bandwidth product of 234 ± 25 GHz at 20 V reverse bias measured for 685 nm input light, with a low dark current of 0.12 μA. We also observe open eye diagrams at up to 56 Gbps. This performance is very competitive when benchmarked against other integrated APDs operating in the infrared range. With CMOS-compatible fabrication and integrability with silicon photonic platforms, our devices are attractive for sensing, imaging, communications, and quantum applications at visible wavelengths.
- 23 March 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-8
Open AccessIntegrated avalanche photodetectors for visible light
Integrated photodetectors are essential components of scalable photonics platforms for quantum and classical applications. However, most efforts in the development of such devices to date have been focused on infrared telecommunications wavelengths. Here, we report the first monolithically integrated avalanche photodetector (APD) for visible light. Our devices are based on a doped silicon rib waveguide with a novel end-fire input coupling to a silicon nitride waveguide. We demonstrate a high gain-bandwidth product of 234 ± 25 GHz at 20 V reverse bias measured for 685 nm input light, with a low dark current of 0.12 μA. We also observe open eye diagrams at up to 56 Gbps. This performance is very competitive when benchmarked against other integrated APDs operating in the infrared range. With CMOS-compatible fabrication and integrability with silicon photonic platforms, our devices are attractive for sensing, imaging, communications, and quantum applications at visible wavelengths.
- 6 May 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (10) , 2740-2743
Phase stabilization of a coherent fiber network by single-photon counting
Coherent optical fiber networks are extremely sensitive to thermal, mechanical, and acoustic noise, which requires elaborate schemes of phase stabilization with dedicated auxiliary lasers, multiplexers, and photodetectors. This is particularly demanding in quantum networks operating at the single-photon level. Here, we propose a simple method of phase stabilization based on single-photon counting and apply it to quantum fiber networks implementing single-photon interference on a lossless beamsplitter and coherent perfect absorption on a metamaterial absorber. As a proof of principle, we show dissipative single-photon switching with visibility close to 80%. This method can be employed in quantum networks of greater complexity without classical stabilization rigs, potentially increasing efficiency of the quantum channels.
- 6 May 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (10) , 2740-2743
Phase stabilization of a coherent fiber network by single-photon counting
Coherent optical fiber networks are extremely sensitive to thermal, mechanical, and acoustic noise, which requires elaborate schemes of phase stabilization with dedicated auxiliary lasers, multiplexers, and photodetectors. This is particularly demanding in quantum networks operating at the single-photon level. Here, we propose a simple method of phase stabilization based on single-photon counting and apply it to quantum fiber networks implementing single-photon interference on a lossless beamsplitter and coherent perfect absorption on a metamaterial absorber. As a proof of principle, we show dissipative single-photon switching with visibility close to 80%. This method can be employed in quantum networks of greater complexity without classical stabilization rigs, potentially increasing efficiency of the quantum channels.
- Open Access
- 27 January 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (4) , 049902
Erratum: “Coherent perfect absorption of single photons in a fiber network” [Appl. Phys. Lett. 115, 191101 (2019)]
- 27 January 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (4) , 049902
Open AccessErratum: “Coherent perfect absorption of single photons in a fiber network” [Appl. Phys. Lett. 115, 191101 (2019)]
- Open Access
- 4 November 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (19) , 191101
Coherent perfect absorption of single photons in a fiber network
Large distance implementation of quantum communication technologies requires coherent control of single photons in optical fiber networks. Here we demonstrate the phenomenon of coherent perfect absorption of single photons in a fully fiberized ultrathin plasmonic metamaterial fabricated at the end facet of an optical fiber. Continuous control of single-photon absorption probability is achieved by driving the network between the regimes of coherent total absorption and coherent total transmission. To circumvent phase fluctuations inherent to optical fiber networks, we implemented a reference-based postselection technique which yielded interference fringe visibility comparable to that of free space experiments. Coherent absorption of quantum light in fiber environment provides new opportunities for dissipative single-photon switching, filtering, and measurement, as well as for manipulation of entangled, weak coherent, and NOON states in optical fiber networks.
- 4 November 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (19) , 191101
Open AccessCoherent perfect absorption of single photons in a fiber network
Large distance implementation of quantum communication technologies requires coherent control of single photons in optical fiber networks. Here we demonstrate the phenomenon of coherent perfect absorption of single photons in a fully fiberized ultrathin plasmonic metamaterial fabricated at the end facet of an optical fiber. Continuous control of single-photon absorption probability is achieved by driving the network between the regimes of coherent total absorption and coherent total transmission. To circumvent phase fluctuations inherent to optical fiber networks, we implemented a reference-based postselection technique which yielded interference fringe visibility comparable to that of free space experiments. Coherent absorption of quantum light in fiber environment provides new opportunities for dissipative single-photon switching, filtering, and measurement, as well as for manipulation of entangled, weak coherent, and NOON states in optical fiber networks.
- Open Access
- 29 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 26 (2) , 1-8
Simulation of Silicon Waveguide Single-Photon Avalanche Detectors for Integrated Quantum Photonics
Integrated quantum photonics is recognized as a key enabling technology on the road towards scalable quantum networking schemes. However, many state-of-the-art integrated quantum photonics demonstrations still require the coupling of light to external photodetectors. On-chip silicon single-photon avalanche diodes (SPADs) provide a viable solution as they can be seamlessly integrated with photonic components, and operated with high efficiencies and low dark counts at temperatures achievable with thermoelectric cooling. In this paper, we report the design and simulation of silicon waveguide-based SPADs on a silicon-on-insulator platform for visible wavelengths, focusing on two device families with different doping configurations: p-n + and p-i-n + . We calculate the photon detection efficiency (PDE) and timing jitter at an input wavelength of 640 nm by simulating the avalanche process using a 2-D Monte Carlo method, as well as the dark count rate (DCR) at 243 K and 300 K. For our simulated parameters, the optimal p-i-n + SPADs show the best device performance, with a saturated PDE of 52.4 ± 0.6% at a reverse bias voltage of 31.5 V, full-width-half-max (FWHM) timing jitter of 10 ps, and a DCR of <;5 counts per second at 243 K.
- 29 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 26 (2) , 1-8
Open AccessSimulation of Silicon Waveguide Single-Photon Avalanche Detectors for Integrated Quantum Photonics
Integrated quantum photonics is recognized as a key enabling technology on the road towards scalable quantum networking schemes. However, many state-of-the-art integrated quantum photonics demonstrations still require the coupling of light to external photodetectors. On-chip silicon single-photon avalanche diodes (SPADs) provide a viable solution as they can be seamlessly integrated with photonic components, and operated with high efficiencies and low dark counts at temperatures achievable with thermoelectric cooling. In this paper, we report the design and simulation of silicon waveguide-based SPADs on a silicon-on-insulator platform for visible wavelengths, focusing on two device families with different doping configurations: p-n + and p-i-n + . We calculate the photon detection efficiency (PDE) and timing jitter at an input wavelength of 640 nm by simulating the avalanche process using a 2-D Monte Carlo method, as well as the dark count rate (DCR) at 243 K and 300 K. For our simulated parameters, the optimal p-i-n + SPADs show the best device performance, with a saturated PDE of 52.4 ± 0.6% at a reverse bias voltage of 31.5 V, full-width-half-max (FWHM) timing jitter of 10 ps, and a DCR of <;5 counts per second at 243 K.
- Open Access
- 31 May 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (12) , 15232-15246
2D Monte Carlo simulation of a silicon waveguide-based single-photon avalanche diode for visible wavelengths
Integrated photonics platforms are crucial to the development and implementation of scalable quantum information and networking schemes, but many such devices still rely on external bulk photodetectors. We report the design and simulation of a waveguide-based single-photon avalanche diode (SPAD) for visible wavelengths. The SPAD consists of a p-n junction implemented in a doped silicon waveguide, which is end-fire coupled to an input silicon nitride waveguide. We developed a 2D Monte Carlo model to simulate the avalanche multiplication process of charge carriers following the absorption of an input photon, and calculated the photon detection efficiency (PDE) and timing jitter of the SPAD. We investigated the SPAD performance at a wavelength of 640 nm and temperature of 243K for different device dimensions and device doping configurations. For our simulated parameters, we obtained a maximum PDE of 0.45 at a reverse bias voltage of ~20 V, and full-width-half-max (FWHM) timing jitter values <8 ps.
- 31 May 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (12) , 15232-15246
Open Access2D Monte Carlo simulation of a silicon waveguide-based single-photon avalanche diode for visible wavelengths
Integrated photonics platforms are crucial to the development and implementation of scalable quantum information and networking schemes, but many such devices still rely on external bulk photodetectors. We report the design and simulation of a waveguide-based single-photon avalanche diode (SPAD) for visible wavelengths. The SPAD consists of a p-n junction implemented in a doped silicon waveguide, which is end-fire coupled to an input silicon nitride waveguide. We developed a 2D Monte Carlo model to simulate the avalanche multiplication process of charge carriers following the absorption of an input photon, and calculated the photon detection efficiency (PDE) and timing jitter of the SPAD. We investigated the SPAD performance at a wavelength of 640 nm and temperature of 243K for different device dimensions and device doping configurations. For our simulated parameters, we obtained a maximum PDE of 0.45 at a reverse bias voltage of ~20 V, and full-width-half-max (FWHM) timing jitter values <8 ps.
- 1 January 2018
- Published by Optica Publishing Group
- p. JTh2A.6
Towards a Waveguide-based Single Photon Detector for Integrated Quantum Photonics Platforms
We design a waveguide-based Geiger-mode silicon single-photon avalanche diode (SPAD), optimized for visible wavelengths. We simulate photon detection efficiency and timing jitter with 2D Monte Carlo simulator for SPADs with different widths and bias voltages.
- 1 January 2018
- Published by Optica Publishing Group
- p. JTh2A.6
Towards a Waveguide-based Single Photon Detector for Integrated Quantum Photonics Platforms
We design a waveguide-based Geiger-mode silicon single-photon avalanche diode (SPAD), optimized for visible wavelengths. We simulate photon detection efficiency and timing jitter with 2D Monte Carlo simulator for SPADs with different widths and bias voltages.