Steingrimur Stefansson
Research Subjects
Steingrimur Stefansson has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Daniel A. Lawrence
3 shared publications- Daniel A. Lawrence
University of Michigan Medical School
3 shared publications Hena H. Kwon
NanoDiagnostics & Devices, Chomdanguiup1-ro, Gumi, Republic of Korea
3 shared publicationsHerbert J. Evans
3 shared publications- R. Manjunatha Kini
Department of Biological Sciences, National University of Singapore, Singapore 117558, Singapore
3 shared publications Saeyoung Nate Ahn
Fuzbien Technology Institute, 9700 Great Seneca Highway, Rockville, MD 20850, USA
3 shared publications
Latest Publications
- Open Access
- 24 March 2017
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 2 (3) , 1156-1162
Spiral Countercurrent Chromatography Enrichment, Characterization, and Assays of Carbon Nanotube Chiralities for Use in Biosensors
Single-walled carbon nanotubes (SWCNTs) are synthetic materials that hold great promise for electronics that are smaller and more versatile than the current silica-based technologies. But as-produced SWCNTs are generally a mixture of nanotubes with different structures that have vastly different properties. Separating these SWCNTs from multiwalled and metallic carbon nanotubes is vital to explore their individual properties and commercial utility ranging from optics to semiconductors. Compounding the problem of commercial investigation is that the semiconducting SWCNTs are also a mixture of different diameters and/or chiralities with different properties. Analyzing properties of enriched semiconducting SWCNT chiralities has only recently been possible through separation techniques such as aqueous two-phase solvent systems. Our study illustrates a semipreparative spiral countercurrent chromatography (CCC) separation of a commercial mixture of SWCNTs into distinct enriched fractions. A new mixer–settler spiral disk rotor was applied in this study, in which we compare the enriched SWCNTs for their effectiveness in biosensors with a high-throughput model assay, followed by antibody-mediated detection of Escherichia coli. Our results demonstrate that CCC-enriched responsive SWCNTs for biosensors can be used in our model assay, as well as for the detection of E. coli. To date, we believe that this is the first study along with Liu et al. [Chirality-controlled synthesis of single-wall carbon nanotubes using vapour-phase epitaxy. Nat. Commun. 2012 , 3 , 1199] to demonstrate a specific utility of separated SWCNT species.
- 24 March 2017
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 2 (3) , 1156-1162
Open AccessSpiral Countercurrent Chromatography Enrichment, Characterization, and Assays of Carbon Nanotube Chiralities for Use in Biosensors
Single-walled carbon nanotubes (SWCNTs) are synthetic materials that hold great promise for electronics that are smaller and more versatile than the current silica-based technologies. But as-produced SWCNTs are generally a mixture of nanotubes with different structures that have vastly different properties. Separating these SWCNTs from multiwalled and metallic carbon nanotubes is vital to explore their individual properties and commercial utility ranging from optics to semiconductors. Compounding the problem of commercial investigation is that the semiconducting SWCNTs are also a mixture of different diameters and/or chiralities with different properties. Analyzing properties of enriched semiconducting SWCNT chiralities has only recently been possible through separation techniques such as aqueous two-phase solvent systems. Our study illustrates a semipreparative spiral countercurrent chromatography (CCC) separation of a commercial mixture of SWCNTs into distinct enriched fractions. A new mixer–settler spiral disk rotor was applied in this study, in which we compare the enriched SWCNTs for their effectiveness in biosensors with a high-throughput model assay, followed by antibody-mediated detection of Escherichia coli. Our results demonstrate that CCC-enriched responsive SWCNTs for biosensors can be used in our model assay, as well as for the detection of E. coli. To date, we believe that this is the first study along with Liu et al. [Chirality-controlled synthesis of single-wall carbon nanotubes using vapour-phase epitaxy. Nat. Commun. 2012 , 3 , 1199] to demonstrate a specific utility of separated SWCNT species.
- Open Access
- 14 July 2013
- Published by Wiley in International Journal of Peptides
- Vol. 2013, 1-6
High-Throughput Peptide Epitope Mapping Using Carbon Nanotube Field-Effect Transistors
Label-free and real-time detection technologies can dramatically reduce the time and cost of pharmaceutical testing and development. However, to reach their full promise, these technologies need to be adaptable to high-throughput automation. To demonstrate the potential of single-walled carbon nanotube field-effect transistors (SWCNT-FETs) for high-throughput peptide-based assays, we have designed circuits arranged in an 8 × 12 (96-well) format that are accessible to standard multichannel pipettors. We performed epitope mapping of two HIV-1 gp160 antibodies using an overlapping gp160 15-mer peptide library coated onto nonfunctionalized SWCNTs. The 15-mer peptides did not require a linker to adhere to the non-functionalized SWCNTs, and binding data was obtained in real time for all 96 circuits. Despite some sequence differences in the HIV strains used to generate these antibodies and the overlapping peptide library, respectively, our results using these antibodies are in good agreement with known data, indicating that peptides immobilized onto SWCNT are accessible and that linear epitope mapping can be performed in minutes using SWCNT-FET.
- 14 July 2013
- Published by Wiley in International Journal of Peptides
- Vol. 2013, 1-6
Open AccessHigh-Throughput Peptide Epitope Mapping Using Carbon Nanotube Field-Effect Transistors
Label-free and real-time detection technologies can dramatically reduce the time and cost of pharmaceutical testing and development. However, to reach their full promise, these technologies need to be adaptable to high-throughput automation. To demonstrate the potential of single-walled carbon nanotube field-effect transistors (SWCNT-FETs) for high-throughput peptide-based assays, we have designed circuits arranged in an 8 × 12 (96-well) format that are accessible to standard multichannel pipettors. We performed epitope mapping of two HIV-1 gp160 antibodies using an overlapping gp160 15-mer peptide library coated onto nonfunctionalized SWCNTs. The 15-mer peptides did not require a linker to adhere to the non-functionalized SWCNTs, and binding data was obtained in real time for all 96 circuits. Despite some sequence differences in the HIV strains used to generate these antibodies and the overlapping peptide library, respectively, our results using these antibodies are in good agreement with known data, indicating that peptides immobilized onto SWCNT are accessible and that linear epitope mapping can be performed in minutes using SWCNT-FET.
- Open Access
- 12 June 2013
- Published by Wiley in Chromatography Research International
- Vol. 2013, 1-6
Isolation of Low Abundance Proteins and Cells Using Buoyant Glass Microbubble Chromatography
Conventional protein affinity chromatography relies on highly porous resins that have large surface areas. These properties are ideal for fast flow separation of proteins from biological samples with maximum yields, but these properties can also lead to increased nonspecific protein binding. In certain applications where the purity of an isolated protein is more important than the yield, using a glass solid phase could be advantageous as glass is nonporous and hydrophilic and has a low surface area and low nonspecific protein binding. As a proof of principle, we used protein A-conjugated hollow glass microbubbles to isolate fluorescently labeled neurofilament heavy chain spiked into serum and compared them to protein A Sepharose and protein A magnetic beads (Dynabeads) using an anti-neurofilament protein antibody. As expected, a greater volume of glass bubbles was required to match the binding capacity of the magnetic beads and Sepharose resins. On the other hand, nonspecific protein binding to glass bubbles was greatly reduced compared to the other resins. Additionally, since the glass bubbles are buoyant and transparent, they are well suited for isolating cells from biological samples and staining themin situ.
- 12 June 2013
- Published by Wiley in Chromatography Research International
- Vol. 2013, 1-6
Open AccessIsolation of Low Abundance Proteins and Cells Using Buoyant Glass Microbubble Chromatography
Conventional protein affinity chromatography relies on highly porous resins that have large surface areas. These properties are ideal for fast flow separation of proteins from biological samples with maximum yields, but these properties can also lead to increased nonspecific protein binding. In certain applications where the purity of an isolated protein is more important than the yield, using a glass solid phase could be advantageous as glass is nonporous and hydrophilic and has a low surface area and low nonspecific protein binding. As a proof of principle, we used protein A-conjugated hollow glass microbubbles to isolate fluorescently labeled neurofilament heavy chain spiked into serum and compared them to protein A Sepharose and protein A magnetic beads (Dynabeads) using an anti-neurofilament protein antibody. As expected, a greater volume of glass bubbles was required to match the binding capacity of the magnetic beads and Sepharose resins. On the other hand, nonspecific protein binding to glass bubbles was greatly reduced compared to the other resins. Additionally, since the glass bubbles are buoyant and transparent, they are well suited for isolating cells from biological samples and staining themin situ.
- Open Access
- 1 May 2012
- Published by Taylor & Francis in BioTechniques
- Vol. 52 (5) , 290
Common Benzothiazole and Benzoxazole Fluorescent DNA Intercalators for Studying Alzheimer Aβ 1-42 and Prion Amyloid Peptides
Amyloids are fibrillar protein aggregates associated with a number of neurodegenerative pathologies including Alzheimer and Creutzfeldt–Jakob disease. The study of amyloids is usually based on fluorescence with the...
- 1 May 2012
- Published by Taylor & Francis in BioTechniques
- Vol. 52 (5) , 290
Open AccessCommon Benzothiazole and Benzoxazole Fluorescent DNA Intercalators for Studying Alzheimer Aβ 1-42 and Prion Amyloid Peptides
Amyloids are fibrillar protein aggregates associated with a number of neurodegenerative pathologies including Alzheimer and Creutzfeldt–Jakob disease. The study of amyloids is usually based on fluorescence with the...
- 30 March 2012
- Published by Springer Nature in MRS Proceedings
- Vol. 1416
Rapid Diagnosis of E. Coli using Carbon Nanotube Field Effect Transistor Direct Binding Assay
- 30 March 2012
- Published by Springer Nature in MRS Proceedings
- Vol. 1416
Rapid Diagnosis of E. Coli using Carbon Nanotube Field Effect Transistor Direct Binding Assay
- Open Access
- 1 January 2012
- Published by SAGE Publications in Nanomaterials and Nanotechnology
- Vol. 2, 11
Specific Binding of Alzheimer's Aβ Peptide Fibrils to Single-Walled Carbon Nanotubes
Amyloids constitute a class of protein and protein fragments believed to be involved in the pathologies associated with Alzheimer's, Parkinson's and Creutzfeldt-Jakob diseases. These proteins can self-assemble into unique fibrillar structures that are resistant to normal protein degradation. Interesting recent developments in the study of amyloid fibrils demonstrate that they bind carbon allotropes. In this study using single-walled carbon nanotube field-effect transistors (SWCNT-FETs), we show that the fibrillar form of Alzheimer's amyloid β (1–40) and (1–42) peptides specifically bind non-functionalized SWCNT in a saturable manner. Both peptides exhibited near identical binding curves with half-maximal binding concentrations of approximately 12 μg/ml. Binding of the peptides to SWCNTs was diminished by including dimethyl sulphoxide (DMSO) at concentrations that inhibits fibril formation. Lastly a monoclonal antibody (BAM-10), which binds to the N-terminal region of Alzheimer's amyloid fibrils, recognizes the amyloid peptides adhering to SWCNTs in the absence of DMSO, but not in the presence of 75% DMSO. Taken together, these results suggest that the fibrillar form of the Alzheimer's amyloid peptides are specifically binding to SWCNTs.
- 1 January 2012
- Published by SAGE Publications in Nanomaterials and Nanotechnology
- Vol. 2, 11
Open AccessSpecific Binding of Alzheimer's Aβ Peptide Fibrils to Single-Walled Carbon Nanotubes
Amyloids constitute a class of protein and protein fragments believed to be involved in the pathologies associated with Alzheimer's, Parkinson's and Creutzfeldt-Jakob diseases. These proteins can self-assemble into unique fibrillar structures that are resistant to normal protein degradation. Interesting recent developments in the study of amyloid fibrils demonstrate that they bind carbon allotropes. In this study using single-walled carbon nanotube field-effect transistors (SWCNT-FETs), we show that the fibrillar form of Alzheimer's amyloid β (1–40) and (1–42) peptides specifically bind non-functionalized SWCNT in a saturable manner. Both peptides exhibited near identical binding curves with half-maximal binding concentrations of approximately 12 μg/ml. Binding of the peptides to SWCNTs was diminished by including dimethyl sulphoxide (DMSO) at concentrations that inhibits fibril formation. Lastly a monoclonal antibody (BAM-10), which binds to the N-terminal region of Alzheimer's amyloid fibrils, recognizes the amyloid peptides adhering to SWCNTs in the absence of DMSO, but not in the presence of 75% DMSO. Taken together, these results suggest that the fibrillar form of the Alzheimer's amyloid peptides are specifically binding to SWCNTs.
- Open Access
- 1 January 2012
- Published by Wiley in Journal of Nanotechnology
- Vol. 2012, 1-8
Targeting Antibodies to Carbon Nanotube Field Effect Transistors by Pyrene Hydrazide Modification of Heavy Chain Carbohydrates
Many carbon nanotube field-effect transistor (CNT-FET) studies have used immobilized antibodies as the ligand binding moiety. However, antibodies are not optimal for CNT-FET detection due to their large size and charge. Their size can prevent ligands from reaching within the Debye length of the CNTs and a layer of charged antibodies on the circuits can drown out any ligand signal. In an attempt to minimize the antibody footprint on CNT-FETs, we examined whether pyrene hydrazide modification of antibody carbohydrates could reduce the concentration required to functionalize CNT circuits. The carbohydrates are almost exclusively on the antibody Fc region and this site-specific modification could mediate uniform antibody orientation on the CNTs. We compared the hydrazide modification of anti-E. coliO157:H7 polyclonal antibodies to pyrenebutanoic acid succinimidyl ester-coated CNTs and carbodiimide-mediated antibody CNT attachment. Our results show that the pyrene hydrazide modification was superior to those methods with respect to bacteria detection and less than 1 nM labeled antibody was required to functionalize the circuits.
- 1 January 2012
- Published by Wiley in Journal of Nanotechnology
- Vol. 2012, 1-8
Open AccessTargeting Antibodies to Carbon Nanotube Field Effect Transistors by Pyrene Hydrazide Modification of Heavy Chain Carbohydrates
Many carbon nanotube field-effect transistor (CNT-FET) studies have used immobilized antibodies as the ligand binding moiety. However, antibodies are not optimal for CNT-FET detection due to their large size and charge. Their size can prevent ligands from reaching within the Debye length of the CNTs and a layer of charged antibodies on the circuits can drown out any ligand signal. In an attempt to minimize the antibody footprint on CNT-FETs, we examined whether pyrene hydrazide modification of antibody carbohydrates could reduce the concentration required to functionalize CNT circuits. The carbohydrates are almost exclusively on the antibody Fc region and this site-specific modification could mediate uniform antibody orientation on the CNTs. We compared the hydrazide modification of anti-E. coliO157:H7 polyclonal antibodies to pyrenebutanoic acid succinimidyl ester-coated CNTs and carbodiimide-mediated antibody CNT attachment. Our results show that the pyrene hydrazide modification was superior to those methods with respect to bacteria detection and less than 1 nM labeled antibody was required to functionalize the circuits.
- Open Access
- 1 January 2012
- Published by Wiley in Journal of Nanotechnology
- Vol. 2012, 1-6
Evaluation of Aromatic Boronic Acids as Ligands for Measuring Diabetes Markers on Carbon Nanotube Field-Effect Transistors
Biomolecular detections performed on carbon nanotube field-effect transistors (CNT-FETs) frequently use reactive pyrenes as an anchor to tether bioactive ligands to the hydrophobic nanotubes. In this paper, we explore the possibility of directly using bioactive aromatic compounds themselves as CNT-FET ligands. This would be an efficient way to functionalize CNT-FETs since many aromatic compounds bind avidly to nanotubes, and it would also ensure that ligand-binding molecules would be brought in close proximity to the nanotubes. Using a model system consisting of pyrene, phenanthrene, naphthalene, or phenyl boronic acids immobilized on CNT-FET wafers, we show that all are able to bind glycated human serum albumin (gHSA), which is an important diabetes marker. Pyrene boronic acid proved to bind CNTs with the greatest apparent affinity as measured by gHSA impedance. Interestingly, gHSA CNT-FET signal intensity, which is proportional to amount of protein bound, remained essentially unchanged for all the boronic acids tested.
- 1 January 2012
- Published by Wiley in Journal of Nanotechnology
- Vol. 2012, 1-6
Open AccessEvaluation of Aromatic Boronic Acids as Ligands for Measuring Diabetes Markers on Carbon Nanotube Field-Effect Transistors
Biomolecular detections performed on carbon nanotube field-effect transistors (CNT-FETs) frequently use reactive pyrenes as an anchor to tether bioactive ligands to the hydrophobic nanotubes. In this paper, we explore the possibility of directly using bioactive aromatic compounds themselves as CNT-FET ligands. This would be an efficient way to functionalize CNT-FETs since many aromatic compounds bind avidly to nanotubes, and it would also ensure that ligand-binding molecules would be brought in close proximity to the nanotubes. Using a model system consisting of pyrene, phenanthrene, naphthalene, or phenyl boronic acids immobilized on CNT-FET wafers, we show that all are able to bind glycated human serum albumin (gHSA), which is an important diabetes marker. Pyrene boronic acid proved to bind CNTs with the greatest apparent affinity as measured by gHSA impedance. Interestingly, gHSA CNT-FET signal intensity, which is proportional to amount of protein bound, remained essentially unchanged for all the boronic acids tested.
- Open Access
- 1 January 2011
- Published by Springer Nature in Journal of Nanobiotechnology
- Vol. 9 (1) , 36
Comparison of Radioimmuno and Carbon Nanotube Field-Effect Transistor Assays for Measuring Insulin-Like Growth Factor-1 in a Preclinical Model of Human Breast Cancer
To realize the promise of personalized medicine, diagnostic instruments used for detecting and measuring biomarkers must become smaller, faster and less expensive. Although most techniques used currently to detect biomarkers are sensitive and specific, many suffer from several disadvantages including their complexity, high cost and long turnaround time. One strategy to overcome these problems is to exploit carbon nanotube (CNT) based biosensors, which are sensitive, use inexpensive disposable components and can be easily adapted to current assay protocols. In this study we investigated the applicability of using a CNT field-effect transistor (CNT-FET) as a diagnostic instrument for measuring cancer biomarkers in serum using a mouse model of Breast Cancer Susceptibility 1-related breast cancer. Insulin like growth factor-1 (IGF-1) was chosen because it is highly relevant in breast cancer and because measuring serum IGF-1 levels by conventional methods is complicated due to specific IGF-1 serum binding proteins.
- 1 January 2011
- Published by Springer Nature in Journal of Nanobiotechnology
- Vol. 9 (1) , 36
Open AccessComparison of Radioimmuno and Carbon Nanotube Field-Effect Transistor Assays for Measuring Insulin-Like Growth Factor-1 in a Preclinical Model of Human Breast Cancer
To realize the promise of personalized medicine, diagnostic instruments used for detecting and measuring biomarkers must become smaller, faster and less expensive. Although most techniques used currently to detect biomarkers are sensitive and specific, many suffer from several disadvantages including their complexity, high cost and long turnaround time. One strategy to overcome these problems is to exploit carbon nanotube (CNT) based biosensors, which are sensitive, use inexpensive disposable components and can be easily adapted to current assay protocols. In this study we investigated the applicability of using a CNT field-effect transistor (CNT-FET) as a diagnostic instrument for measuring cancer biomarkers in serum using a mouse model of Breast Cancer Susceptibility 1-related breast cancer. Insulin like growth factor-1 (IGF-1) was chosen because it is highly relevant in breast cancer and because measuring serum IGF-1 levels by conventional methods is complicated due to specific IGF-1 serum binding proteins.
- 1 July 2003
- Published by Bentham Science Publishers Ltd. in Current Pharmaceutical Design
- Vol. 9 (19) , 1545-1564
Plasminogen Activator Inhibitor-1 in Tumor Growth, Angiogenesis and Vascular Remodeling
Plasminogen activator inhibitor-1 (PAI-1) is the principal inhibitor of urokinase type plasminogen activator (uPA) and tissue-type plasminogen activator (tPA), and as such is thought to play an important role in the regulation of extracellular matrix remodeling. In blood, PAI-1 is bound to the adhesion protein vitronectin and is associated with vitronectin in fibrin clots and the provisional matrix. Elevated levels of PAI-1 are associated with atherosclerosis and an increased thrombotic tendency, while PAI-1 deficiency leads to increased fibrinolysis and bleeding. PAI-1 is also elevated in many solid tumors and is associated with a poor prognosis in cancer. PAI-1 has been shown to be a potent regulator of both vascular cell migration in vitro and of angiogenesis and tumor growth in vivo. PAI-1 can both promote and inhibit tumor growth and angiogenesis. Low concentrations of PAI-1 can stimulate tumor angiogenesis while treatment of animals with high doses of PAI-1 inhibits angiogenesis and tumor growth. Hence, PAI-1 appears to have a multifunctional role in regulating the migratory and fibrinolytic activity of vascular cells, and this, in turn, may help to explain the many varied actions of PAI-1.
- 1 July 2003
- Published by Bentham Science Publishers Ltd. in Current Pharmaceutical Design
- Vol. 9 (19) , 1545-1564
Plasminogen Activator Inhibitor-1 in Tumor Growth, Angiogenesis and Vascular Remodeling
Plasminogen activator inhibitor-1 (PAI-1) is the principal inhibitor of urokinase type plasminogen activator (uPA) and tissue-type plasminogen activator (tPA), and as such is thought to play an important role in the regulation of extracellular matrix remodeling. In blood, PAI-1 is bound to the adhesion protein vitronectin and is associated with vitronectin in fibrin clots and the provisional matrix. Elevated levels of PAI-1 are associated with atherosclerosis and an increased thrombotic tendency, while PAI-1 deficiency leads to increased fibrinolysis and bleeding. PAI-1 is also elevated in many solid tumors and is associated with a poor prognosis in cancer. PAI-1 has been shown to be a potent regulator of both vascular cell migration in vitro and of angiogenesis and tumor growth in vivo. PAI-1 can both promote and inhibit tumor growth and angiogenesis. Low concentrations of PAI-1 can stimulate tumor angiogenesis while treatment of animals with high doses of PAI-1 inhibits angiogenesis and tumor growth. Hence, PAI-1 appears to have a multifunctional role in regulating the migratory and fibrinolytic activity of vascular cells, and this, in turn, may help to explain the many varied actions of PAI-1.