Prasana Kumar Sahoo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Prasana Kumar Sahoo has a total of 313 co-authors. Here are the top co-authors by number of shared publications:
Suman Kumar Chakraborty
Indian Institute of Technology
14 shared publicationsBaisali Kundu
Quantum Materials and Device Research lab Materials Science Centre Indian Institute of Technology Kharagpur Kharagpur West Bengal 721302 India
11 shared publicationsA. K. Tyagi
Surface and Nanoscience Division, Indira Gandhi Centre for Atomic Research, Kalpakkam-603102, India
10 shared publications- Sandip Dhara
Indira Gandhi Centre for Atomic Research, A CI of Homi Bhabha National Institute, 603102, Kalpakkam, India.
10 shared publications Biswajeet Nayak
Indian Institute of Technology
7 shared publicationsS. Dash
Surface and Nanoscience Division, Indira Gandhi Center for Atomic Research, Kalpakkam 603102, India
7 shared publications
Latest Publications
- 2 November 2026
- Published by IOP Publishing in 2D Materials
Challenges and Opportunities in 2D Materials: An Indian Perspective
Two-dimensional (2D) materials (Graphene, 2D transition metal dichalcogenides (MX 2 ), hBN) have emerged as exciting materials for discovering novel physical phenomena, and have great potential for electronic and optoelectronic devices, as well as energy and catalysis applications. Further, materials such as Cr 2 X 2 Te 6 (X = Si, Ge), VSe 2 , Fe 3 GeTe 2 , CrX 3 (X = Cl, Br, I) and MPX 3 (M = Mn, Fe, V, Zn, Co, Ni, Cd, Mg; X = S, Se) have emerged as fascinating platforms for 2D magnetism. The heterostructures of these 2D materials, and the twist angle between layers are opening new possibilities of studying the effect of Moiré potential, exotic topological phases, magnetic-proximity effects, and strong correlations. At the same time, the research is leading towards many application-based directions such as in excitonics, valleytronics, straintronics, and quantum technologies. In this context, growth of novel 2D materials and heterostructures, as well as large scale growth becomes critically important. This roadmap aims to provide a comprehensive overview of 2D materials research in India and across the globe. The roadmap is broadly divided into six themes: 1. Topology in 2D Materials, Magnetism, Exotic Physics and Emergent Phenomena; 2. Moiré Physics in 2D Heterostructures; 3. Excitonic Physics and Optical properties, including Defects; 4. Transport Phenomena in 2D Materials; 5. 2D Materials Synthesis and Growth; and 6. 2D Materials Electrical Devices and Applications. This roadmap highlights the cutting edge-research being done by Indian and global researchers, emphasizes the challenges, and suggests possible technological solutions.
- 2 November 2026
- Published by IOP Publishing in 2D Materials
Challenges and Opportunities in 2D Materials: An Indian Perspective
Two-dimensional (2D) materials (Graphene, 2D transition metal dichalcogenides (MX 2 ), hBN) have emerged as exciting materials for discovering novel physical phenomena, and have great potential for electronic and optoelectronic devices, as well as energy and catalysis applications. Further, materials such as Cr 2 X 2 Te 6 (X = Si, Ge), VSe 2 , Fe 3 GeTe 2 , CrX 3 (X = Cl, Br, I) and MPX 3 (M = Mn, Fe, V, Zn, Co, Ni, Cd, Mg; X = S, Se) have emerged as fascinating platforms for 2D magnetism. The heterostructures of these 2D materials, and the twist angle between layers are opening new possibilities of studying the effect of Moiré potential, exotic topological phases, magnetic-proximity effects, and strong correlations. At the same time, the research is leading towards many application-based directions such as in excitonics, valleytronics, straintronics, and quantum technologies. In this context, growth of novel 2D materials and heterostructures, as well as large scale growth becomes critically important. This roadmap aims to provide a comprehensive overview of 2D materials research in India and across the globe. The roadmap is broadly divided into six themes: 1. Topology in 2D Materials, Magnetism, Exotic Physics and Emergent Phenomena; 2. Moiré Physics in 2D Heterostructures; 3. Excitonic Physics and Optical properties, including Defects; 4. Transport Phenomena in 2D Materials; 5. 2D Materials Synthesis and Growth; and 6. 2D Materials Electrical Devices and Applications. This roadmap highlights the cutting edge-research being done by Indian and global researchers, emphasizes the challenges, and suggests possible technological solutions.
- Open Access
- 15 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (44) , 15215-15222
Dipolar Excitonic Quantum Wires at Atomically Sharp Lateral Interfaces
One-dimensional (1D) quantum systems are a cornerstone of condensed matter physics. However, their realization in solids has traditionally relied on top-down methods, which are limited by structural disorder and coarse confinement. Here, we demonstrate a fundamentally new route to low-dimensional systems: the emergence of 1D quantum matter at the atomically sharp interface between monolayer semiconductors. Using lateral MoSe2–WSe2 heterostructures, we identify interfacial excitonic quasiparticles bound to the crystal junction. Photoluminescence spectroscopy resolves these excitons into a ladder of discrete states, establishing 1D confinement at length scales ≲3 nm. These excitons possess exceptionally large permanent in-plane electric dipole moments exceeding e × 2 nm, and exhibit micron-scale anisotropic diffusion confined to the interface. By introducing electrostatic doping, we demonstrate a collapse of the dipole moment and a 20-fold reduction in lifetime. By dynamically tuning wavefunctions within a single atomic monolayer, we open a scalable route toward engineering 1D quantum matter.
- 15 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (44) , 15215-15222
Open AccessDipolar Excitonic Quantum Wires at Atomically Sharp Lateral Interfaces
One-dimensional (1D) quantum systems are a cornerstone of condensed matter physics. However, their realization in solids has traditionally relied on top-down methods, which are limited by structural disorder and coarse confinement. Here, we demonstrate a fundamentally new route to low-dimensional systems: the emergence of 1D quantum matter at the atomically sharp interface between monolayer semiconductors. Using lateral MoSe2–WSe2 heterostructures, we identify interfacial excitonic quasiparticles bound to the crystal junction. Photoluminescence spectroscopy resolves these excitons into a ladder of discrete states, establishing 1D confinement at length scales ≲3 nm. These excitons possess exceptionally large permanent in-plane electric dipole moments exceeding e × 2 nm, and exhibit micron-scale anisotropic diffusion confined to the interface. By introducing electrostatic doping, we demonstrate a collapse of the dipole moment and a 20-fold reduction in lifetime. By dynamically tuning wavefunctions within a single atomic monolayer, we open a scalable route toward engineering 1D quantum matter.
- Open Access
- 17 July 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (35) , 11634-11644
Strongly Bound Charge-Transfer Interface Excitons in Lateral Monolayer MoSe2–WSe2 Heterostructures
In lateral heterostructures of two different transition-metal dichalcogenide monolayers with type-II band alignment, appropriately engineered interface widths and band offsets give rise to dipolar charge-transfer interface excitons, characterized by electrons and holes localized on opposite sides of the junction. This topic has been little explored, mainly because of difficulties to synthesize clean and uniform lateral interfaces. Here, using different experimental techniques, we systematically probe excitons in lateral monolayer MoSe2–WSe2 heterostructures with both sharp and diffuse junctions. Using low-temperature photoluminescence spectroscopy, we find an additional spectral signal exclusively at sharp junctions, compatible with a dipolar charge-transfer exciton. Parameter-free ab initio many-body perturbation theory yields stable, strongly bound dipolar charge-transfer excitons at the lateral MoSe2–WSe2 interface already for small lateral band offsets, supporting the assignment of our detected photoluminescence signal at sharp junctions to a dipolar charge-transfer interface exciton.
- 17 July 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (35) , 11634-11644
Open AccessStrongly Bound Charge-Transfer Interface Excitons in Lateral Monolayer MoSe2–WSe2 Heterostructures
In lateral heterostructures of two different transition-metal dichalcogenide monolayers with type-II band alignment, appropriately engineered interface widths and band offsets give rise to dipolar charge-transfer interface excitons, characterized by electrons and holes localized on opposite sides of the junction. This topic has been little explored, mainly because of difficulties to synthesize clean and uniform lateral interfaces. Here, using different experimental techniques, we systematically probe excitons in lateral monolayer MoSe2–WSe2 heterostructures with both sharp and diffuse junctions. Using low-temperature photoluminescence spectroscopy, we find an additional spectral signal exclusively at sharp junctions, compatible with a dipolar charge-transfer exciton. Parameter-free ab initio many-body perturbation theory yields stable, strongly bound dipolar charge-transfer excitons at the lateral MoSe2–WSe2 interface already for small lateral band offsets, supporting the assignment of our detected photoluminescence signal at sharp junctions to a dipolar charge-transfer interface exciton.
- Open Access
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
CVD Grown 2D MoSe2 Semiconductor for Energy Harvesting Applications
Two-dimensional (2D) transition metal dichalcogenides (TMDs), particularly molybdenum diselenide (MoSe2), have emerged as promising semiconductors for next-generation energy harvesting due to their tunable bandgap, strong light-matter interactions, excellent carrier transport, and intrinsic mechanical flexibility. Herein, high-quality, large-area 2D MoSe2 layers were synthesized CMOS compatible SiO2/Si substrates via chemical vapor deposition (CVD), and subsequently transferred onto flexible indium tin oxide (ITO)-coated polyethylene terephthalate (PET) substrates via a polymer-assisted wet-transfer process for the fabrication of flexible piezoelectric nanogenerator (PENG) devices. Structural, morphological, and spectroscopic analysis confirmed the uniform growth, layered crystallinity, high optical quality, and excellent film continuity of the synthesized 2D MoSe2 films. The fabricated MoSe2-based PENG devices exhibited stable and reproducible piezoelectric output under various mechanical stimuli, including periodic bending, tapping, stretching, and vibration, demonstrating efficient mechanical-to-electrical energy conversion via the piezoelectric response of the layered MoSe2. The device generated a maximum output voltage of ~20 V, current density of 186 nA/cm2, and power density of 3.72 μW/cm2, under an applied force of 16N and an operating frequency of 4 Hz. Importantly, the device demonstrates practical applicability in real-world scenarios, including direct LED illumination, acoustic sensing, wind energy harvesting, and biomechanical motion monitoring. In addition, the device maintains excellent operational stability under repeated mechanical loading cycles, highlighting its robustness for long-term durability. This work establishes scalable CVD-grown 2D MoSe2 layers as a viable platform for high-performance, flexible nanogenerators, self-powered wearable electronics, and low-power sensors, paving the way toward sustainable micro-energy-harvesting technologies.
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCVD Grown 2D MoSe2 Semiconductor for Energy Harvesting Applications
Two-dimensional (2D) transition metal dichalcogenides (TMDs), particularly molybdenum diselenide (MoSe2), have emerged as promising semiconductors for next-generation energy harvesting due to their tunable bandgap, strong light-matter interactions, excellent carrier transport, and intrinsic mechanical flexibility. Herein, high-quality, large-area 2D MoSe2 layers were synthesized CMOS compatible SiO2/Si substrates via chemical vapor deposition (CVD), and subsequently transferred onto flexible indium tin oxide (ITO)-coated polyethylene terephthalate (PET) substrates via a polymer-assisted wet-transfer process for the fabrication of flexible piezoelectric nanogenerator (PENG) devices. Structural, morphological, and spectroscopic analysis confirmed the uniform growth, layered crystallinity, high optical quality, and excellent film continuity of the synthesized 2D MoSe2 films. The fabricated MoSe2-based PENG devices exhibited stable and reproducible piezoelectric output under various mechanical stimuli, including periodic bending, tapping, stretching, and vibration, demonstrating efficient mechanical-to-electrical energy conversion via the piezoelectric response of the layered MoSe2. The device generated a maximum output voltage of ~20 V, current density of 186 nA/cm2, and power density of 3.72 μW/cm2, under an applied force of 16N and an operating frequency of 4 Hz. Importantly, the device demonstrates practical applicability in real-world scenarios, including direct LED illumination, acoustic sensing, wind energy harvesting, and biomechanical motion monitoring. In addition, the device maintains excellent operational stability under repeated mechanical loading cycles, highlighting its robustness for long-term durability. This work establishes scalable CVD-grown 2D MoSe2 layers as a viable platform for high-performance, flexible nanogenerators, self-powered wearable electronics, and low-power sensors, paving the way toward sustainable micro-energy-harvesting technologies.
- 13 April 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (15) , 5178-5186
Direct Nanoscale Mapping of Band Alignment in Single-Layer Semiconducting Lateral Heterojunctions
Atomic-scale control over band alignment in single-layer lateral heterostructures (LHSs) of dissimilar transition metal dichalcogenides (TMDCs) is critical for next-generation electronic, optoelectronic, and quantum technologies. However, direct experimental access to interfacial electronic states with nanometer precision remains a significant challenge. Here, we employ angle-resolved photoemission spectroscopy with nanoscale spatial resolution (nanoARPES) to directly map the epitaxial alignment and valence band evolution across the MoSe2–WSe2 LHSs. By combining nanoARPES with spatially resolved photoluminescence, we correlate the evolution of the valence band maximum and exciton features across both atomically sharp and compositionally graded diffusive interfaces. We identified type-II band alignments governed by both material composition and interstitial-induced modifications of band offsets in close agreement with density functional theory calculations. These results reveal fundamental mechanisms of electronic structure modulation at 1D TMDC heterointerfaces and provide a robust platform for tailored band engineering in van der Waals materials.
- 13 April 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (15) , 5178-5186
Direct Nanoscale Mapping of Band Alignment in Single-Layer Semiconducting Lateral Heterojunctions
Atomic-scale control over band alignment in single-layer lateral heterostructures (LHSs) of dissimilar transition metal dichalcogenides (TMDCs) is critical for next-generation electronic, optoelectronic, and quantum technologies. However, direct experimental access to interfacial electronic states with nanometer precision remains a significant challenge. Here, we employ angle-resolved photoemission spectroscopy with nanoscale spatial resolution (nanoARPES) to directly map the epitaxial alignment and valence band evolution across the MoSe2–WSe2 LHSs. By combining nanoARPES with spatially resolved photoluminescence, we correlate the evolution of the valence band maximum and exciton features across both atomically sharp and compositionally graded diffusive interfaces. We identified type-II band alignments governed by both material composition and interstitial-induced modifications of band offsets in close agreement with density functional theory calculations. These results reveal fundamental mechanisms of electronic structure modulation at 1D TMDC heterointerfaces and provide a robust platform for tailored band engineering in van der Waals materials.
- 17 March 2026
- Published by IOP Publishing in Reports on Progress in Physics
- Vol. 89 (4)
2D excitonics with atomically thin lateral heterostructures
Semiconducting transition metal dichalcogenides (TMDs), such as MoSe 2 and WSe 2 , exhibit unique optical and electronic properties. Vertical stacking of layers of one or more TMDs, to create heterostructures, has expanded the fields of moiré physics and twistronics. Bottom-up fabrication techniques, such as chemical vapor deposition, have advanced the creation of heterostructures beyond what was possible with mechanical exfoliation and stacking. These techniques now enable the fabrication of lateral heterostructures, where two or more monolayers are covalently bonded in the plane of their atoms. At their atomically sharp interfaces, lateral heterostructures exhibit additional phenomena, such as the formation of charge-transfer excitons, in which the electron and hole reside on opposite sides of the interface. Due to the energy landscape created by differences in the band structures of the constituent materials, unique effects such as unidirectional exciton transport and excitonic lensing can be observed in lateral heterostructures. This review outlines recent progress in exciton dynamics and spectroscopy of TMD-based lateral heterostructures and offers an outlook on future developments in excitonics in this promising system.
- 17 March 2026
- Published by IOP Publishing in Reports on Progress in Physics
- Vol. 89 (4)
2D excitonics with atomically thin lateral heterostructures
Semiconducting transition metal dichalcogenides (TMDs), such as MoSe 2 and WSe 2 , exhibit unique optical and electronic properties. Vertical stacking of layers of one or more TMDs, to create heterostructures, has expanded the fields of moiré physics and twistronics. Bottom-up fabrication techniques, such as chemical vapor deposition, have advanced the creation of heterostructures beyond what was possible with mechanical exfoliation and stacking. These techniques now enable the fabrication of lateral heterostructures, where two or more monolayers are covalently bonded in the plane of their atoms. At their atomically sharp interfaces, lateral heterostructures exhibit additional phenomena, such as the formation of charge-transfer excitons, in which the electron and hole reside on opposite sides of the interface. Due to the energy landscape created by differences in the band structures of the constituent materials, unique effects such as unidirectional exciton transport and excitonic lensing can be observed in lateral heterostructures. This review outlines recent progress in exciton dynamics and spectroscopy of TMD-based lateral heterostructures and offers an outlook on future developments in excitonics in this promising system.
- Open Access
Direct nanoscale mapping of band alignment in single-layer semiconducting lateral heterojunctions
Atomic-scale control over band alignment in single-layer lateral heterostructures (LHSs) of dissimilar transition metal dichalcogenides (TMDCs) is critical for nextgeneration electronic, optoelectronic, and quantum technologies. However, direct experimental access to interfacial electronic states with nanometer precision remains a significant challenge. Here, we employ angle-resolved photoemission spectroscopy with nanoscale spatial resolution (nanoARPES) to directly map the epitaxial alignment and valence band evolution across MoSe2-WSe2 LHSs. By combining nanoARPES with spatially resolved photoluminescence, we correlate the evolution of the valence band maximum and exciton features across both atomically sharp and compositionally graded diffusive interfaces. We identified type-II band alignments governed by both material composition and interstitial-induced modifications of band offsets, in close agreement with density functional theory calculations. These results reveal fundamental mechanisms of electronic structure modulation at 1D TMDC heterointerfaces and provide a robust platform for tailored band engineering in van der Waals materials.
Open AccessDirect nanoscale mapping of band alignment in single-layer semiconducting lateral heterojunctions
Atomic-scale control over band alignment in single-layer lateral heterostructures (LHSs) of dissimilar transition metal dichalcogenides (TMDCs) is critical for nextgeneration electronic, optoelectronic, and quantum technologies. However, direct experimental access to interfacial electronic states with nanometer precision remains a significant challenge. Here, we employ angle-resolved photoemission spectroscopy with nanoscale spatial resolution (nanoARPES) to directly map the epitaxial alignment and valence band evolution across MoSe2-WSe2 LHSs. By combining nanoARPES with spatially resolved photoluminescence, we correlate the evolution of the valence band maximum and exciton features across both atomically sharp and compositionally graded diffusive interfaces. We identified type-II band alignments governed by both material composition and interstitial-induced modifications of band offsets, in close agreement with density functional theory calculations. These results reveal fundamental mechanisms of electronic structure modulation at 1D TMDC heterointerfaces and provide a robust platform for tailored band engineering in van der Waals materials.
- 26 November 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (8) , e20008
Quadruple Moiré Pockets in Lateral Heterobilayers: Programmable Phononic Reconfiguration and Anomalous Second Harmonic Generation
Moiré‐engineering in 2D transition‐metal dichalcogenides offers access to correlated quantum phenomena. However, simultaneous control over twist‐angle (θ) and material combinations to tune phonons, excitons, and their collective interactions remains limited. This study presents scalable, quadruple moiré‐pockets formed by vertically stacking chemical vapor deposition‐grown monolayer MoS 2 –WS 2 and MoSe 2 –WSe 2 lateral heterostructures with controlled θ (0⁰–60°), within a single flatland. Moiré non‐rigidity induces lattice‐relaxation via rotational reconstruction (θ8°), resulting in strain‐mediated phonon frequency‐softening and linewidth‐broadening, respectively. Strain localizes selectively in mechanically softer crystal for θ8°. Degree of phonon‐reconfiguration and angle‐resolved photoemission spectroscopy uncover the role of interfacial orbitals in modulating interlayer coupling. At aligned angles (θ–0° and 60°), specifically, MoS 2 exhibits Davydov splitting and reduced valley polarization, reflecting symmetry breaking and chiral phonon effects. At θ–3°, WS 2 /WSe 2 shows up to 480% enhancement in second‐harmonic generation (SHG), while WS 2 /MoSe 2 records the lowest due to variations in interlayer‐coherence and band‐offset‐driven phase delay. Notably, at θ–60°, only WS 2 /MoSe 2 exhibits an anomalous 300% SHG enhancement, attributed to large phase delay and reconstruction‐induced strain. Electronic bandstructure calculations support these observations. These findings offer programmable multi‐moiré platforms for opto‐straintronics, sensing, and on‐chip quantum photonics applications.
- 26 November 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (8) , e20008
Quadruple Moiré Pockets in Lateral Heterobilayers: Programmable Phononic Reconfiguration and Anomalous Second Harmonic Generation
Moiré‐engineering in 2D transition‐metal dichalcogenides offers access to correlated quantum phenomena. However, simultaneous control over twist‐angle (θ) and material combinations to tune phonons, excitons, and their collective interactions remains limited. This study presents scalable, quadruple moiré‐pockets formed by vertically stacking chemical vapor deposition‐grown monolayer MoS 2 –WS 2 and MoSe 2 –WSe 2 lateral heterostructures with controlled θ (0⁰–60°), within a single flatland. Moiré non‐rigidity induces lattice‐relaxation via rotational reconstruction (θ8°), resulting in strain‐mediated phonon frequency‐softening and linewidth‐broadening, respectively. Strain localizes selectively in mechanically softer crystal for θ8°. Degree of phonon‐reconfiguration and angle‐resolved photoemission spectroscopy uncover the role of interfacial orbitals in modulating interlayer coupling. At aligned angles (θ–0° and 60°), specifically, MoS 2 exhibits Davydov splitting and reduced valley polarization, reflecting symmetry breaking and chiral phonon effects. At θ–3°, WS 2 /WSe 2 shows up to 480% enhancement in second‐harmonic generation (SHG), while WS 2 /MoSe 2 records the lowest due to variations in interlayer‐coherence and band‐offset‐driven phase delay. Notably, at θ–60°, only WS 2 /MoSe 2 exhibits an anomalous 300% SHG enhancement, attributed to large phase delay and reconstruction‐induced strain. Electronic bandstructure calculations support these observations. These findings offer programmable multi‐moiré platforms for opto‐straintronics, sensing, and on‐chip quantum photonics applications.
- 20 November 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (26)
Trion‐Engineered Multimodal Photo‐Transistors in Two‐Dimensional Lateral Heterostructures
Multimodal device operations are essential to advancing the on‐chip integration of 2D semiconductors in electronics, photonics, and quantum technology. Precise control over carrier dynamics, particularly exciton generation and transport, is crucial for fine‐tuning the functionality of 2D heterostructure‐based optoelectronic devices. However, traditional exciton engineering in 2D semiconductors is mainly restricted to artificially assembled vertical heterostructures with electrical or strain‐induced confinements. Here, bilayer 2D MoSe 2 ‐WSe 2 ‐MoSe 2 lateral heterostructures are utilized to achieve preferential exciton generation and manipulation without the need for external confinement. In lateral n‐p‐n field‐effect transistor (FET) geometry, unique and nontrivial electro‐optical properties are uncovered, including dynamic tuning of channel photoresponsivity from positive to negative. The multimodal operation of these 2D‐FETs is achieved by adjusting electrical bias and the impinging photon energy, enabling precise control over the trion generation and transport. Cryogenic photoluminescence measurement reveals the presence of trions in bilayer MoSe 2 and intrinsic trap states in WSe 2 , which enhance the sensitivity of the device to near‐infrared photons. Measurements in different FET device geometries show the multi‐functionality of 2D lateral heterostructures for efficient electrical manipulation of excitonic characteristics. The findings pave the way for developing practical exciton‐based transistors, sensors, multimodal optoelectronic components on‐chip, and quantum technologies.
- 20 November 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (26)
Trion‐Engineered Multimodal Photo‐Transistors in Two‐Dimensional Lateral Heterostructures
Multimodal device operations are essential to advancing the on‐chip integration of 2D semiconductors in electronics, photonics, and quantum technology. Precise control over carrier dynamics, particularly exciton generation and transport, is crucial for fine‐tuning the functionality of 2D heterostructure‐based optoelectronic devices. However, traditional exciton engineering in 2D semiconductors is mainly restricted to artificially assembled vertical heterostructures with electrical or strain‐induced confinements. Here, bilayer 2D MoSe 2 ‐WSe 2 ‐MoSe 2 lateral heterostructures are utilized to achieve preferential exciton generation and manipulation without the need for external confinement. In lateral n‐p‐n field‐effect transistor (FET) geometry, unique and nontrivial electro‐optical properties are uncovered, including dynamic tuning of channel photoresponsivity from positive to negative. The multimodal operation of these 2D‐FETs is achieved by adjusting electrical bias and the impinging photon energy, enabling precise control over the trion generation and transport. Cryogenic photoluminescence measurement reveals the presence of trions in bilayer MoSe 2 and intrinsic trap states in WSe 2 , which enhance the sensitivity of the device to near‐infrared photons. Measurements in different FET device geometries show the multi‐functionality of 2D lateral heterostructures for efficient electrical manipulation of excitonic characteristics. The findings pave the way for developing practical exciton‐based transistors, sensors, multimodal optoelectronic components on‐chip, and quantum technologies.
- Open Access
- 13 November 2025
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 9 (1) , 94
Seamless in two dimensions: prospects of lateral heterostructures from integration to quantum devices
- 13 November 2025
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 9 (1) , 94
Open AccessSeamless in two dimensions: prospects of lateral heterostructures from integration to quantum devices