OPOleksandr V. Pshyk

Oleksandr V. Pshyk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksandr V. Pshyk has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Auger Parameter Analysis for TiN and AlN Thin Films via Combined In Situ XPS and HAXPES

    by O. V. Pshyk, J. Patidar, C. Cancellieri, S. Siol

    Auger parameter analysis provides in‐depth information about electronic and chemical bonding properties of TiN and AlN thin films, which are relevant across a wide range of technologies. Meaningful interpretation and analysis of Auger parameter of these materials have been hindered due to, among other reasons, the absence of reliable references. Here, we present a comprehensive study of Auger parameters for TiN and AlN thin films using a dual‐source lab‐based XPS/HAXPES system equipped with Al Kα and Cr Kα X‐ray sources. Due to a large spread of excitation X‐ray energy, bulk‐ and surface‐sensitive core‐level photoelectrons and Auger transitions are probed. This allows us to study a wide range of Auger and core level emission lines of TiN and AlN. These measurements can serve as references for further identification of chemical state changes, oxidation state, or any deviations in the local chemical environment in these materials. UHV sample transfer was employed to minimize surface contamination. Additionally, we demonstrate how common procedures such as ambient air exposure and Ar + sputter‐etching influence the Auger parameters, highlighting the importance of surface preparation in spectroscopic analysis.


  • Open Access

    Unlocking ultrastrong high-temperature ceramics via non-equimolar refractory metal high-entropy nitrides

    by O. V. Pshyk, A. Vasylenko, P. Küttel, B. Wicher, P. Schweizer, J. Michler, T.E.J. Edwards

    Refractory ceramic materials are critical for applications in extreme high-temperature environments. Refractory high-entropy ceramics belong to this class of materials and show great potential due to their remarkable combination of properties. Traditionally, increasing compositional complexity and chemical diversity of high-entropy ceramics whilst maintaining a stable single-phase solid solution has been a primary design strategy for developing new ceramics. Here, we unveil an alternative strategy based on deviation from conventional equimolar composition towards non-equimolar composition space, enabling tuning the metastability level of the supersaturated single-phase solid solution. By employing high-temperature micromechanical testing and post-mortem microstructural characterization of refractory metal-based high-entropy nitrides, we observed the activation of an additional strengthening mechanism upon spinodal decomposition of the metastable phase into coherent cubic-phase domains exhibiting compositional modulation. This process propels the yield strength of a non-equimolar nitride at 1000 °C to a staggering 6.9 GPa, that is 43% higher than the most robust equimolar nitride.


  • Top Cited Papers
    Open Access

    Current View of Nanoindentation: Recent Developments and Application in Material Characterization

    by Oleksandr Pshyk, Olesya Nakonechna, Emerson Coy

    The first demonstration of qualitative nanoindentation several decades ago sparked enormous research on different types of materials, revealing unprecedented mechanical phenomena and properties. Since mechanical properties are directly linked to many materials' structural and compositional features, nanoindentation has been successfully utilized to explore the coupling between mechanical behavior and functional properties, like electrical conductivity, reaction kinetics in electrodes, and hydrogen charging. Nanoindentation measurements have evolved beyond probing simple bulk metals, extending to complex alloys, nanomaterials, and nanocomposites. This review summarizes recent advancements in the nanoindentation technique, which now expands beyond traditional hardness and Young's modulus measurement. Beginning with the fundamental mechanics and principles of indentation, we explore recent methodological developments. We discuss the interpretation and significance of key mechanical characteristics derived from nanoindentation including elastic strain to failure, resistance to plastic deformation, and elastic recovery. Furthermore, we highlight advanced approaches such as topographic reconstruction of thin films, combinatorial nanoindentation, and in situ and operando nanoindentation.


  • Open Access

    Discovering Stable Amorphous Ceramics: From Computational Prediction to Thin‐Film Synthesis

    by Oleksandr V. Pshyk, Siarhei Zhuk, Jyotish Patidar, Alexander Wieczorek, Amit Sharma, Johann Michler, Claudia Cancellieri, Vladan Stevanovic, Sebastian Siol

    Amorphous materials offer unique functional characteristics, which are not observed in their crystalline counterparts making them invaluable for many applications in science and technology, such as electronic and optical devices, solid‐state batteries, and protective coatings. However, finding compositions that are stable against crystallization and/or phase separation, and at the same time offer the needed functionality in the amorphous phase is still largely done by serendipity or trial‐and‐error. In this work, using yttrium tungsten nitride as a prototype, it is shown how computational random structure sampling provides a robust method to identify compositions that exhibit a highly corrugated potential energy surface with many narrow local minima, which are consequently hard to crystallize and remain stable in the amorphous phase. Synthesis experiments prove that the predicted nitride is readily synthesized in an amorphous phase with no detectable precipitates. High‐throughput and conventional characterization of structural, physical, and functional properties of the discovered amorphous nitride compound reveal its attractive properties and possible application potential. The proposed workflow combining theory and experiment is broadly applicable to the discovery of a wide range of amorphous ceramic materials, paving the way for advanced amorphous materials for diverse emerging technologies.


  • Open Access

    Beyond Structural Stabilization of Highly‐Textured AlN Thin Films: The Role of Chemical Effects

    by Oleksandr V. Pshyk, Jyotish Patidar, Mohammad Alinezhadfar, Siarhei Zhuk, Sebastian Siol

    The crystalline quality and degree of c‐axis orientation of hexagonal AlN thin films correlate directly with their functional properties. Therefore, achieving AlN thin films of high crystalline quality and texture is of extraordinary importance for many applications, but particularly in electronic devices. This systematic study reveals, that the growth of c‐axis‐orientated AlN thin films can be governed by a chemical stabilization effect in addition to the conventionally known structural, strain‐induced, stabilization mechanism. The promotion of in‐plane growth of AlN grains with c‐axis out‐of‐plane orientation is demonstrated on Y, W, or Al seed layers with different thicknesses and crystallinity preliminary exposed to N2 at room temperature. It is established that the stabilization mechanism is chemical in nature: the formation of an N‐rich surface layer on the metal seed layers upon exposure to N2 pre‐determines the polarity of AlN islands at the initial stages of thin film growth while the low energy barrier for the subsequent coalescence of islands of the same polarity contributes to grain growth. These results suggest that the growth of c‐axis oriented AlN thin films can be optimized and controlled chemically, thus opening more pathways for energy‐efficient and controllable AlN thin film growth processes.


  • Open Access

    Unlocking ultrastrong high-temperature ceramics: Beyond Equimolar Compositions in High Entropy Nitrides

    by O. V. Pshyk, A. Vasylenko, P. Kuttel, B. Wicher, P. Schweizer, J. Michler, T. E. J. Edwards

    Traditionally, increasing compositional complexity and chemical diversity of high entropy alloy ceramics whilst maintaining a stable single-phase solid solution has been a primary design strategy for the development of new ceramics. However, only a handful have shown properties that justify the increased alloying content. Here, we unveil a groundbreaking strategy based on deviation from conventional equimolar composition towards non-equimolar composition space, enabling tuning the metastability level of the supersaturated single-phase solid solution. By employing high-temperature micromechanical testing of refractory metal-based high entropy nitrides, we found that the activation of an additional strengthening mechanism upon metastable phase decomposition propels the yield strength of a non-equimolar nitride at 1000 C to a staggering 6.9 GPa, that is 40 % higher than the most robust equimolar nitride. We show that the inherent instability triggers the decomposition of the solid solution with non-equimolar composition at high temperatures, inducing strengthening due to the coherency stress of a spinodally modulated structure, combined with the lattice resistance of the product solid solution phase. In stark contrast, the strength of equimolar systems, boasting diverse chemical compositions, declines as a function of temperature due to the weakening of the lattice resistance and the absence of other strengthening mechanisms.

  • Open Access

    Beyond structural stabilization of highly-textured AlN thin film: the role of chemical effects

    by O. V. Pshyk, J. Patidar, S. Siol

    The crystalline quality and degree of c-axis orientation of hexagonal AlN thin films correlate directly with their functional properties. Therefore, achieving AlN thin films of high crystalline quality and texture is of extraordinary importance for many applications, but in particular in electronic devices. Here, we present a systematic study revealing that the growth of c-axis orientated AlN thin films can be governed by a chemical stabilization effect in addition to the conventionally known structural, i.e. strain-induced, stabilization mechanism. The promotion of in-plane growth of AlN grains with c-axis out-of-plane orientation is demonstrated on Y, W or Al seed layers with different thicknesses and crystallinity preliminary exposed to N2 at room temperature. We establish that the stabilization mechanism is chemical in nature: the formation of an N-rich surface layer on the metal seed layers upon exposure to N2 pre-determines the polarity of AlN islands at initial stages of thin film growth while the low energy barrier for the subsequent coalescence of islands of the same polarity contributes to grain growth. These results suggest that the growth of c-axis oriented AlN thin films can be optimized and controlled chemically thus opening more pathways for energy-efficient and controllable AlN thin-film growth processes.

  • Open Access

    High-entropy transition metal nitride thin films alloyed with Al: Microstructure, phase composition and mechanical properties

    by A.V. Pshyk, A. Vasylenko, B. Bakhit, L. Hultman, P. Schweizer, T.E.J. Edwards, J. Michler, G. Greczynski