Rachel Makungo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rachel Makungo has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- John Ogony Odiyo
Office of The DVC Research Innovation Commercialisation and Internationalisation (RICI), Vaal University of Technology, Vanderbijlpark 1901, South Africa
20 shared publications - Adeyemi Ojutalayo Adeeyo
Earth Science Department, Faculty of Science Engineering and Agriculture University of Venda, Thohoyandou, South Africa
4 shared publications B. Mwaka
3 shared publications- Joshua Akinropo Oyetade
School of Materials, Energy, Water and Environment Sciences, Nelson Mandela African Institution of Science and Technology, Arusha P.O. Box 447, Tanzania
3 shared publications - Joshua Nosa Edokpayi
Department of Geography and Environmental Sciences, University of Venda, Thohoyandou, South Africa
3 shared publications - Mercy Adewumi Alabi
Department of Microbiology, School of Life Sciences University of KwaZulu‐Natal Durban South Africa
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Faculty of Agriculture, Brawijaya University in Journal of Degraded and Mining Lands Management
- Vol. 13 (4)
Geospatial analysis of ionic concentrations in borehole and geothermal spring waters of Baleni Village, South Africa
The research presents a geographic study examining ionic levels in both borehole and geothermal spring water across Baleni Village, South Africa, which has active geothermal sites and relies on groundwater for its cultural practices. The study examined how spatial variations in hydrogeochemical properties affect water quality, resource management, and energy production. The study aimed to measure ionic levels while mapping their distribution to create baseline data for hydrochemical research. The study analysed 10 water samples, including 5 borehole and 5 geothermal samples, using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), and applied Geographic Information Systems (GIS) and Ordinary kriging interpolation to create maps of ionic distribution. The study showed that pH levels meet acceptable standards. The study found that electrical conductivity, salinity, and total dissolved solids levels exceeded acceptable limits, particularly in geothermal samples. Sodium emerged as the dominant ion, with higher levels resulting from geothermal processes and water–rock interactions. The geological controls created two separate zones, which showed different levels of ionic enrichment. The study recommends continuous monitoring, along with the implementation of water treatment and additional feasibility assessments, to achieve sustainable utilisation, including potential electrochemical energy generation.
- 1 October 2026
- Published by Faculty of Agriculture, Brawijaya University in Journal of Degraded and Mining Lands Management
- Vol. 13 (4)
Open AccessGeospatial analysis of ionic concentrations in borehole and geothermal spring waters of Baleni Village, South Africa
The research presents a geographic study examining ionic levels in both borehole and geothermal spring water across Baleni Village, South Africa, which has active geothermal sites and relies on groundwater for its cultural practices. The study examined how spatial variations in hydrogeochemical properties affect water quality, resource management, and energy production. The study aimed to measure ionic levels while mapping their distribution to create baseline data for hydrochemical research. The study analysed 10 water samples, including 5 borehole and 5 geothermal samples, using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), and applied Geographic Information Systems (GIS) and Ordinary kriging interpolation to create maps of ionic distribution. The study showed that pH levels meet acceptable standards. The study found that electrical conductivity, salinity, and total dissolved solids levels exceeded acceptable limits, particularly in geothermal samples. Sodium emerged as the dominant ion, with higher levels resulting from geothermal processes and water–rock interactions. The geological controls created two separate zones, which showed different levels of ionic enrichment. The study recommends continuous monitoring, along with the implementation of water treatment and additional feasibility assessments, to achieve sustainable utilisation, including potential electrochemical energy generation.
- Open Access
- 7 July 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (13) , 6914
Assessing the Performance of a Rural Water Supply System: Case Study of Matatani Village, Vhembe District Municipality, South Africa
This study assessed the performance of a rural water supply system. Performance assessment of water supply systems is important to ensure the long-term sustainability of water services. The study addressed a critical gap in assessing performance while accounting for water disruptions and their effects on water quality in nonlinear rural water supply systems. This is critical, especially in rural areas where reliable access to water is limited. A questionnaire survey was conducted to collect data on the reliability and accessibility of the water supply system. Questionnaire responses were analysed using the Statistical Package for Social Sciences version 25. Spearman’s rank correlation was used to determine the relationship between the socio-economic variables and the performance indicators. and the variables. Turbidity, electrical conductivity (EC), total dissolved solids (TDS), and pH were measured in the field. Escherichia coli (E. coli) and total coliforms were analysed using the membrane filtration method. A paired two-tailed t-test was used to determine if there is a significant difference in water quality between the dry and wet seasons. Key performance indicators on reliability and accessibility were assessed by comparing benchmarks. Most households receive an inadequate quantity of water, with 84.3% using less than the recommended basic need of 1500 L per week. Travel distances to the source exceeded the recommended benchmark of 100 m. The majority of respondents (81.4%) reported frequent water supply disruptions, indicating poor reliability of the source. EC and pH were within the South African National Standards (SANS) 241 guideline for drinking water. TDS, turbidity, and microbial parameters failed to meet safe drinking water standards, except for E. coli during the dry season. There was no significant difference in the water quality between the dry and wet seasons. The water supply system demonstrated poor performance. Measures such as implementing low-cost filtration systems to reduce turbidity, raising community awareness about water safety, and decentralising maintenance activities to improve system sustainability due to financial constraints. These interventions will reduce physical burdens and increase effective water usage.
- 7 July 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (13) , 6914
Open AccessAssessing the Performance of a Rural Water Supply System: Case Study of Matatani Village, Vhembe District Municipality, South Africa
This study assessed the performance of a rural water supply system. Performance assessment of water supply systems is important to ensure the long-term sustainability of water services. The study addressed a critical gap in assessing performance while accounting for water disruptions and their effects on water quality in nonlinear rural water supply systems. This is critical, especially in rural areas where reliable access to water is limited. A questionnaire survey was conducted to collect data on the reliability and accessibility of the water supply system. Questionnaire responses were analysed using the Statistical Package for Social Sciences version 25. Spearman’s rank correlation was used to determine the relationship between the socio-economic variables and the performance indicators. and the variables. Turbidity, electrical conductivity (EC), total dissolved solids (TDS), and pH were measured in the field. Escherichia coli (E. coli) and total coliforms were analysed using the membrane filtration method. A paired two-tailed t-test was used to determine if there is a significant difference in water quality between the dry and wet seasons. Key performance indicators on reliability and accessibility were assessed by comparing benchmarks. Most households receive an inadequate quantity of water, with 84.3% using less than the recommended basic need of 1500 L per week. Travel distances to the source exceeded the recommended benchmark of 100 m. The majority of respondents (81.4%) reported frequent water supply disruptions, indicating poor reliability of the source. EC and pH were within the South African National Standards (SANS) 241 guideline for drinking water. TDS, turbidity, and microbial parameters failed to meet safe drinking water standards, except for E. coli during the dry season. There was no significant difference in the water quality between the dry and wet seasons. The water supply system demonstrated poor performance. Measures such as implementing low-cost filtration systems to reduce turbidity, raising community awareness about water safety, and decentralising maintenance activities to improve system sustainability due to financial constraints. These interventions will reduce physical burdens and increase effective water usage.
- Open Access
Assessing the Ability of the Variable Length Block Bootstrapping Model for the Generation of Multiple Stochastic Hydrometric Data Types
Stochastic inputs are essential for incorporating hydrological variability in water resources assessment, planning, and management. However, most studies focus on the generation of precipitation and temperature, precipitation and streamflow, and precipitation and evaporation, with limited incorporation of groundwater levels. This study assessed the ability of the Variable Length Block (VLB) bootstrapping model for simultaneously generating stochastic sequences of rainfall, evaporation, and groundwater levels. The performance of the model was assessed by comparing single statistics of historical time series located within the box plots of 100 annual and monthly stochastically generated time series. The model preserved eight of the nine statistics adequately, except for skewness, across all variables, with historical values for evaporation and groundwater levels falling below and above the interquartile range for 12 months. All the historic statistics for rainfall, evaporation, and groundwater levels were within the interquartile ranges of the box plots for 83, 71, and 71% of the time, respectively. The historic statistics for rainfall, evaporation, and groundwater levels were within the box plot ranges for 100, 98, and 99% of the time, respectively. These findings indicated reasonably successful generation, and the VLB generator was therefore considered applicable for the stochastic generation of multiple hydrometric data types.
Open AccessAssessing the Ability of the Variable Length Block Bootstrapping Model for the Generation of Multiple Stochastic Hydrometric Data Types
Stochastic inputs are essential for incorporating hydrological variability in water resources assessment, planning, and management. However, most studies focus on the generation of precipitation and temperature, precipitation and streamflow, and precipitation and evaporation, with limited incorporation of groundwater levels. This study assessed the ability of the Variable Length Block (VLB) bootstrapping model for simultaneously generating stochastic sequences of rainfall, evaporation, and groundwater levels. The performance of the model was assessed by comparing single statistics of historical time series located within the box plots of 100 annual and monthly stochastically generated time series. The model preserved eight of the nine statistics adequately, except for skewness, across all variables, with historical values for evaporation and groundwater levels falling below and above the interquartile range for 12 months. All the historic statistics for rainfall, evaporation, and groundwater levels were within the interquartile ranges of the box plots for 83, 71, and 71% of the time, respectively. The historic statistics for rainfall, evaporation, and groundwater levels were within the box plot ranges for 100, 98, and 99% of the time, respectively. These findings indicated reasonably successful generation, and the VLB generator was therefore considered applicable for the stochastic generation of multiple hydrometric data types.
- Open Access
- 13 December 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (12) , 1402
Assessment of Landfill Gas Dispersion and Health Risks Using AERMOD and TROPOMI Satellite Data: A Case Study of the Thohoyandou Landfill, South Africa
Landfills are vital waste management techniques in South Africa but are significant sources of greenhouse gases (GHGs) and air pollutants that can threaten nearby communities. This study provides a novel integrated assessment approach by combining high-resolution TROPOMI satellite observations with AERMOD dispersion modelling. This study investigates the dispersion characteristics and potential health impacts of landfill gas (LFG) emissions from the Thohoyandou landfill. Unlike previous studies that rely solely on modelling or field measurements, this work offers the first satellite-validated landfill gas dispersion analysis in South Africa. The modelling results indicated that the highest hourly concentrations reached 456,056 µg/m3 for CH4 and 735,108 µg/m3 for CO2, while annual maximum concentrations were 15,699 µg/m3 and 30,590 µg/m3, respectively. Health risk assessments were performed for 26 volatile organic compounds and hazardous air pollutants (VOCs/HAPs) using the USEPA methodology. Most individual hazard quotient (HQ) values were below 1, except for 1,1,2-trichloroethane (HQ = 1.27). The cumulative HQ of 1.86 suggested a potential non-carcinogenic risk for nearby residents. Carcinogenic risk analysis identified 13 compounds, with hydrogen sulphide posing the highest probability of cancer risk. The findings reveal that LFG emissions may adversely affect air quality and present both non-carcinogenic and carcinogenic health risks to populations living or working near the landfill.
- 13 December 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (12) , 1402
Open AccessAssessment of Landfill Gas Dispersion and Health Risks Using AERMOD and TROPOMI Satellite Data: A Case Study of the Thohoyandou Landfill, South Africa
Landfills are vital waste management techniques in South Africa but are significant sources of greenhouse gases (GHGs) and air pollutants that can threaten nearby communities. This study provides a novel integrated assessment approach by combining high-resolution TROPOMI satellite observations with AERMOD dispersion modelling. This study investigates the dispersion characteristics and potential health impacts of landfill gas (LFG) emissions from the Thohoyandou landfill. Unlike previous studies that rely solely on modelling or field measurements, this work offers the first satellite-validated landfill gas dispersion analysis in South Africa. The modelling results indicated that the highest hourly concentrations reached 456,056 µg/m3 for CH4 and 735,108 µg/m3 for CO2, while annual maximum concentrations were 15,699 µg/m3 and 30,590 µg/m3, respectively. Health risk assessments were performed for 26 volatile organic compounds and hazardous air pollutants (VOCs/HAPs) using the USEPA methodology. Most individual hazard quotient (HQ) values were below 1, except for 1,1,2-trichloroethane (HQ = 1.27). The cumulative HQ of 1.86 suggested a potential non-carcinogenic risk for nearby residents. Carcinogenic risk analysis identified 13 compounds, with hydrogen sulphide posing the highest probability of cancer risk. The findings reveal that LFG emissions may adversely affect air quality and present both non-carcinogenic and carcinogenic health risks to populations living or working near the landfill.
- Open Access
- 25 November 2025
- Published by MDPI AG in Microbiology Research
- Vol. 16 (12) , 246
Evaluation of Purification and Disinfection Potentials of Plant-Based Biomass from Wild Sesame Plant
The limitations reported for conventional approaches in the treatment and disinfection of water have led to a recent exploration in the use of plant-based water treatment solutions. This technique leverages natural, renewable, and often locally available resources with appreciable environmentally friendly features, cost-effectiveness, and a sustainable nature compared to chemical and energy-intensive conventional methods. Therefore, the current study aimed to evaluate the water purification and disinfection potential of Sesame plant biomass. The experimental process entails the use of plant fibre, leaf dry matter, and ash for the treatment of sampled water from the river and spring source at concentrations of 1–5 g/L. The physicochemical and microbial properties of river and spring water were evaluated after 30 min and 24 h of treatment. Raw river water showed higher pH, conductivity, salinity, total dissolved solids, and turbidity than spring water. Treatment increased pH in both sources (river 6.86–7.94; spring 6.46–8.28), remaining within regulatory limits. The greatest salinity reduction (79.03 mg/L) occurred with dry leaf matter in river water. Sesame ash showed the strongest antimicrobial effect, inhibiting E. coli by 99% in river water and completely in spring water. The reduction in total coliforms by 98% also highlights its potential for sustainable water purification.
- 25 November 2025
- Published by MDPI AG in Microbiology Research
- Vol. 16 (12) , 246
Open AccessEvaluation of Purification and Disinfection Potentials of Plant-Based Biomass from Wild Sesame Plant
The limitations reported for conventional approaches in the treatment and disinfection of water have led to a recent exploration in the use of plant-based water treatment solutions. This technique leverages natural, renewable, and often locally available resources with appreciable environmentally friendly features, cost-effectiveness, and a sustainable nature compared to chemical and energy-intensive conventional methods. Therefore, the current study aimed to evaluate the water purification and disinfection potential of Sesame plant biomass. The experimental process entails the use of plant fibre, leaf dry matter, and ash for the treatment of sampled water from the river and spring source at concentrations of 1–5 g/L. The physicochemical and microbial properties of river and spring water were evaluated after 30 min and 24 h of treatment. Raw river water showed higher pH, conductivity, salinity, total dissolved solids, and turbidity than spring water. Treatment increased pH in both sources (river 6.86–7.94; spring 6.46–8.28), remaining within regulatory limits. The greatest salinity reduction (79.03 mg/L) occurred with dry leaf matter in river water. Sesame ash showed the strongest antimicrobial effect, inhibiting E. coli by 99% in river water and completely in spring water. The reduction in total coliforms by 98% also highlights its potential for sustainable water purification.
- Open Access
- 26 January 2025
- Published by MDPI AG in Magnetochemistry
- Vol. 11 (2) , 9
Magnetic Nanoparticles: Advances in Synthesis, Sensing, and Theragnostic Applications
The synthesis of magnetic nanoparticles (MNPs) via the chemical, biological, and physical routes has been reported on along with advantages and attendant limitations. This study focuses on the sensing and emerging theragnostic applications of this category of nanoparticles (NPs) in clinical sciences by unveiling the unique performance of these NPs in the biological sensing of bacteria and nucleotide sequencing. Also, in terms of medicine and clinical science, this review analyzes the emerging theragnostic applications of NPs in drug delivery, bone tissue engineering, deep brain stimulation, therapeutic hyperthermia, tumor detection, magnetic imaging and cell tracking, lymph node visualization, blood purification, and COVID-19 detection. This review presents succinct surface functionalization and unique surface coating techniques to confer less toxicity and biocompatibility during synthesis, which are often identified as limitations in medical applications. This study also indicates that these surface improvement techniques are useful for refining the selective activity of MNPs during their use as sensors and biomarkers. In addition, this study unveils attendant limitations, especially toxicological impacts on biomolecules, and suggests that future research should pay attention to the mitigation of the biotoxicity of MNPs. Thus, this study presents a proficient approach for the synthesis of high-performance MNPs fit for proficient medicine in the detection of microorganisms, better diagnosis, and treatment in medicine.
- 26 January 2025
- Published by MDPI AG in Magnetochemistry
- Vol. 11 (2) , 9
Open AccessMagnetic Nanoparticles: Advances in Synthesis, Sensing, and Theragnostic Applications
The synthesis of magnetic nanoparticles (MNPs) via the chemical, biological, and physical routes has been reported on along with advantages and attendant limitations. This study focuses on the sensing and emerging theragnostic applications of this category of nanoparticles (NPs) in clinical sciences by unveiling the unique performance of these NPs in the biological sensing of bacteria and nucleotide sequencing. Also, in terms of medicine and clinical science, this review analyzes the emerging theragnostic applications of NPs in drug delivery, bone tissue engineering, deep brain stimulation, therapeutic hyperthermia, tumor detection, magnetic imaging and cell tracking, lymph node visualization, blood purification, and COVID-19 detection. This review presents succinct surface functionalization and unique surface coating techniques to confer less toxicity and biocompatibility during synthesis, which are often identified as limitations in medical applications. This study also indicates that these surface improvement techniques are useful for refining the selective activity of MNPs during their use as sensors and biomarkers. In addition, this study unveils attendant limitations, especially toxicological impacts on biomolecules, and suggests that future research should pay attention to the mitigation of the biotoxicity of MNPs. Thus, this study presents a proficient approach for the synthesis of high-performance MNPs fit for proficient medicine in the detection of microorganisms, better diagnosis, and treatment in medicine.
- Open Access
- 30 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (7) , 5989
Monitoring of Subsurface Emissions and the Influence of Meteorological Factors on Landfill Gas Emissions: A Case Study of a South African Landfill
The government-accredited GA 2000 landfill gas analyzer was used to monitor the landfill gas (methane (CH4) and carbon dioxide (CO2)) generated from the subsurface of a landfill. Eighteen gas sample probes were constructed and placed approximately 100 m apart on the boundaries of the landfill site. The monitoring of the gases was conducted over a period of two years, taking into consideration the different seasons of the year. Results from the study show that as the LFG migrates toward the boundaries of the landfill in the subsurface, higher CO2 levels are recorded when compared to CH4. This could be a result of the oxidation process and some other factors present in the landfill. CH4 emissions ranged from 0.54 to 2.22% v/v in 2020. For the year 2021, the CH4 concentration ranged from 0.24% v/v to 2.33% v/v. In addition, the CO2 concentration for the year 2020 ranged from 4.66 to 6.37% v/v. In the year 2021, the CO2 concentration ranged from 3.5 to 6.56% v/v. Furthermore, higher gaseous concentrations were found in the surrounding active cells, where there is currently deposition of municipal solid waste (MSW). However, the monitoring probes situated in areas far away from the landfill recorded lower gaseous levels. This study recommends that there should be continuous monitoring of the LFG emission from the Thohoyandou landfill due to the different results obtained over the temporal variation. Frequent monitoring will help prevent the potential risk of fire hazards and pollution in the future.
- 30 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (7) , 5989
Open AccessMonitoring of Subsurface Emissions and the Influence of Meteorological Factors on Landfill Gas Emissions: A Case Study of a South African Landfill
The government-accredited GA 2000 landfill gas analyzer was used to monitor the landfill gas (methane (CH4) and carbon dioxide (CO2)) generated from the subsurface of a landfill. Eighteen gas sample probes were constructed and placed approximately 100 m apart on the boundaries of the landfill site. The monitoring of the gases was conducted over a period of two years, taking into consideration the different seasons of the year. Results from the study show that as the LFG migrates toward the boundaries of the landfill in the subsurface, higher CO2 levels are recorded when compared to CH4. This could be a result of the oxidation process and some other factors present in the landfill. CH4 emissions ranged from 0.54 to 2.22% v/v in 2020. For the year 2021, the CH4 concentration ranged from 0.24% v/v to 2.33% v/v. In addition, the CO2 concentration for the year 2020 ranged from 4.66 to 6.37% v/v. In the year 2021, the CO2 concentration ranged from 3.5 to 6.56% v/v. Furthermore, higher gaseous concentrations were found in the surrounding active cells, where there is currently deposition of municipal solid waste (MSW). However, the monitoring probes situated in areas far away from the landfill recorded lower gaseous levels. This study recommends that there should be continuous monitoring of the LFG emission from the Thohoyandou landfill due to the different results obtained over the temporal variation. Frequent monitoring will help prevent the potential risk of fire hazards and pollution in the future.
- Open Access
- 22 March 2023
- Published by IWA Publishing in Water Reuse
- Vol. 13 (2) , 134-161
Recovery of precious metals from processed wastewater: conventional techniques nexus advanced and pragmatic alternatives
The loss of highly sought-after metals such as gold, silver, and platinum during extraction processes not only constitutes a significant waste of valuable resources but also contributes to alarming environmental pollution. The ever-growing adverse impacts of these highly valued metals significantly increase the contamination of water bodies on discharge, while reducing the reusability potential of their corresponding processed wastewater. It is, therefore, of great interest to identify pragmatic solutions for the recovery of precious materials from processed water. In this review, pollution from targeted precious metals such as gold, silver, platinum, palladium, iridium, ruthenium, and rhodium was reviewed and analyzed. Also, the hazardous effects are elicited, and detection techniques are enumerated. An insightful approach to more recent treatment techniques was also discussed. The study reveals nano- and bio-sorption techniques as adoptable pragmatic alternatives, among other techniques, especially for industrial applications with merits of cost, time, waste management, and eco-friendliness. The results indicate that gold (46.2%), palladium (23.1%), platinum (19.2%), and silver (11.5%) are of utmost interest when considering recent recovery techniques. High yield and cost analysis reduction are reasons for the observed preference of this recovery process when considering groups of precious metals. The challenges and prospects of nanomaterials are highlighted.
- 22 March 2023
- Published by IWA Publishing in Water Reuse
- Vol. 13 (2) , 134-161
Open AccessRecovery of precious metals from processed wastewater: conventional techniques nexus advanced and pragmatic alternatives
The loss of highly sought-after metals such as gold, silver, and platinum during extraction processes not only constitutes a significant waste of valuable resources but also contributes to alarming environmental pollution. The ever-growing adverse impacts of these highly valued metals significantly increase the contamination of water bodies on discharge, while reducing the reusability potential of their corresponding processed wastewater. It is, therefore, of great interest to identify pragmatic solutions for the recovery of precious materials from processed water. In this review, pollution from targeted precious metals such as gold, silver, platinum, palladium, iridium, ruthenium, and rhodium was reviewed and analyzed. Also, the hazardous effects are elicited, and detection techniques are enumerated. An insightful approach to more recent treatment techniques was also discussed. The study reveals nano- and bio-sorption techniques as adoptable pragmatic alternatives, among other techniques, especially for industrial applications with merits of cost, time, waste management, and eco-friendliness. The results indicate that gold (46.2%), palladium (23.1%), platinum (19.2%), and silver (11.5%) are of utmost interest when considering recent recovery techniques. High yield and cost analysis reduction are reasons for the observed preference of this recovery process when considering groups of precious metals. The challenges and prospects of nanomaterials are highlighted.
- Open Access
- 4 February 2023
- Published by Elsevier in Climate Services
- Vol. 30
Prioritising climate coping and adaptation strategies for smallholder farmers in Luvuvhu River Catchment, South Africa
- 4 February 2023
- Published by Elsevier in Climate Services
- Vol. 30
Open AccessPrioritising climate coping and adaptation strategies for smallholder farmers in Luvuvhu River Catchment, South Africa
- Open Access
- 24 May 2022
- Published by IWA Publishing in Journal of Water and Climate Change
- Vol. 13 (6) , 2319-2336
Long-term trends and changes in rainfall magnitude and duration in a semi-arid catchment, South Africa
The study investigated long-term trends and changes in rainfall magnitude and duration in a semi-arid catchment. It is crucial to determine changes in rainfall to support efforts to adapt to climate change in highly vulnerable semi-arid areas. Trends for long-term seasonal and annual rainfall magnitude and duration were determined using Mann–Kendall (MK) and quantile regression (QR) methods. Sen's slope was used to determine the magnitude of change in rainfall. Correlation analysis was conducted to determine the influence of altitude and land-use change on rainfall trends. There were dominant non-statistically significant decreasing trends for annual, seasonal rainfall magnitude, and rainfall duration. Trends from QR at low (0.1 and 0.2) and high (0.7 and 0.9) quantiles mostly deviated from those of MK. There were weak and variable correlations of long-term rainfall trends with altitude and land-use change. Land-use change and topography may therefore not adequately explain the variations of trends. Further studies are essential to understand the interaction of various environmental factors and their influence on rainfall trends. Variations of trends will impact future water resource availability and allocation. It is important to consider the deviations when developing climate change adaptation measures and ensure improved decision-making.
- 24 May 2022
- Published by IWA Publishing in Journal of Water and Climate Change
- Vol. 13 (6) , 2319-2336
Open AccessLong-term trends and changes in rainfall magnitude and duration in a semi-arid catchment, South Africa
The study investigated long-term trends and changes in rainfall magnitude and duration in a semi-arid catchment. It is crucial to determine changes in rainfall to support efforts to adapt to climate change in highly vulnerable semi-arid areas. Trends for long-term seasonal and annual rainfall magnitude and duration were determined using Mann–Kendall (MK) and quantile regression (QR) methods. Sen's slope was used to determine the magnitude of change in rainfall. Correlation analysis was conducted to determine the influence of altitude and land-use change on rainfall trends. There were dominant non-statistically significant decreasing trends for annual, seasonal rainfall magnitude, and rainfall duration. Trends from QR at low (0.1 and 0.2) and high (0.7 and 0.9) quantiles mostly deviated from those of MK. There were weak and variable correlations of long-term rainfall trends with altitude and land-use change. Land-use change and topography may therefore not adequately explain the variations of trends. Further studies are essential to understand the interaction of various environmental factors and their influence on rainfall trends. Variations of trends will impact future water resource availability and allocation. It is important to consider the deviations when developing climate change adaptation measures and ensure improved decision-making.