Pedro Montes-García
Research Subjects
Pedro Montes-García has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Marco Antonio Maldonado-García
Instituto Tecnológico de Oaxaca
4 shared publications - Herwing Zeth López Calvo
Universidad Autónoma Benito Juárez de Oaxaca
2 shared publications - Víctor Alberto Franco Luján
Tecnológico Nacional de México
2 shared publications Andy Alfonso Olivera
Centro Interdisciplinario de Investigación para el Desarrollo Integral Regional unidad Oaxaca
1 shared publication- Delia Soto-Castro
SECIHTI ‐ Instituto Politécnico Nacional, CIIDIR Unidad Oaxaca Oaxaca Mexico
1 shared publication - G.F. Gómez-Luna
Instituto Politécnico Nacional, Grupo de Materiales y Construcción, CIIDIR Oaxaca, Hornos No. 1003, Sta. Cruz Xoxocotlán, Oax, Mexico
1 shared publication
Latest Publications
- 7 January 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 100
Ultrasonic parameters to assess durability of ecological concretes containing fly ash and untreated sugarcane bagasse ash
- 7 January 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 100
Ultrasonic parameters to assess durability of ecological concretes containing fly ash and untreated sugarcane bagasse ash
- Open Access
- 10 October 2023
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Spanish Journal of Agricultural Research
- Vol. 21 (4) , e1002
Larvicidal effect of an N-isobutyl-(2E,4E,8Z,10E/Z)-dodecatetraenamides-rich extract of Salmea scandens on fall armyworm
Aim of study: To determine if secondary metabolites present in an ethanolic extract of Salmea scandens could be considered as a viable alternative for the control of fall armyworm (Spodoptera frugiperda larvae), as this is the most important maize pest in terms of economic losses to agriculture worldwide. Area of study: S. scandens shrubs were collected in San Rafael Toltepec, Oaxaca, Mexico. The laboratory assays were conducted at CIIDIR Oaxaca, and preliminary field assay was carried out in Zaachila Oaxaca. Material and methods: N-isobutyl-(2E,4E,8Z,10E/Z)-dodecatetraenamides-rich extract of S. scandens, corroborated by nuclear magnetic resonance (1H NMR and 13C NMR) and Fourier transform infrared (FTIR), was obtained from S. scandens by 10-day maceration in ethanol. The effect of the extract on the mortality of S. frugiperda larvae was investigated in the laboratory (in vitro) by topical application, and in the field (in situ), testing both topical and spraying applications. Main results: The 1H NMR, 13C NMR and FTIR spectra evidenced the obtention of the alkylamides-rich ethanol extract of S. scandens. Mortality of S. frugiperda in vitro increased with dose and monitoring time, reaching up to 80%. Under field conditions 63% of mortality was recorded at a dose of 0.30 mg µL-1 per larva by topical application, and 49% by spray application at a dose of 0.15 mg µL-1 per larva. Research highlights: The ethanolic extract of S. scandens can be considered a viable alternative for controlling fall armyworm S. frugiperda.
- 10 October 2023
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Spanish Journal of Agricultural Research
- Vol. 21 (4) , e1002
Open AccessLarvicidal effect of an N-isobutyl-(2E,4E,8Z,10E/Z)-dodecatetraenamides-rich extract of Salmea scandens on fall armyworm
Aim of study: To determine if secondary metabolites present in an ethanolic extract of Salmea scandens could be considered as a viable alternative for the control of fall armyworm (Spodoptera frugiperda larvae), as this is the most important maize pest in terms of economic losses to agriculture worldwide. Area of study: S. scandens shrubs were collected in San Rafael Toltepec, Oaxaca, Mexico. The laboratory assays were conducted at CIIDIR Oaxaca, and preliminary field assay was carried out in Zaachila Oaxaca. Material and methods: N-isobutyl-(2E,4E,8Z,10E/Z)-dodecatetraenamides-rich extract of S. scandens, corroborated by nuclear magnetic resonance (1H NMR and 13C NMR) and Fourier transform infrared (FTIR), was obtained from S. scandens by 10-day maceration in ethanol. The effect of the extract on the mortality of S. frugiperda larvae was investigated in the laboratory (in vitro) by topical application, and in the field (in situ), testing both topical and spraying applications. Main results: The 1H NMR, 13C NMR and FTIR spectra evidenced the obtention of the alkylamides-rich ethanol extract of S. scandens. Mortality of S. frugiperda in vitro increased with dose and monitoring time, reaching up to 80%. Under field conditions 63% of mortality was recorded at a dose of 0.30 mg µL-1 per larva by topical application, and 49% by spray application at a dose of 0.15 mg µL-1 per larva. Research highlights: The ethanolic extract of S. scandens can be considered a viable alternative for controlling fall armyworm S. frugiperda.
- Open Access
- 24 May 2023
- Published by Elsevier in Results in Engineering
- Vol. 18
Reliability of electrical resistivity on the long-term monitoring of concrete
- 24 May 2023
- Published by Elsevier in Results in Engineering
- Vol. 18
Open AccessReliability of electrical resistivity on the long-term monitoring of concrete
- 27 April 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 385, 131514
Assessment of corrosion prevention methods for steel reinforcement embedded in concrete exposed to a natural marine environment
- 27 April 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 385, 131514
Assessment of corrosion prevention methods for steel reinforcement embedded in concrete exposed to a natural marine environment
- 1 April 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (4)
Long-Term Corrosion Risk of Thin Cement Composites Containing Untreated Sugarcane Bagasse Ash
The corrosion risk in reinforced mortar slabs containing untreated sugarcane bagasse ash (UtSCBA) (0%, 10%, and 20% replacement of cement) was analyzed for 75 months. The mortars were prepared with a constant 0.63 water/cementitious-materials ratio. Cylinders and reinforced slabs were cast with the mortars. Two galvanized wire meshes were used as reinforcement for the slabs. Curing regimes of 0, 7, and 28 days were applied to the samples. The cylinders were used to obtain the compressive strength (CS) and the chloride diffusion coefficient ( ) of the mortars. To evaluate the corrosion risk, the slabs were exposed to wet-dry cycles of 12 h each in a 3% NaCl solution. Corrosion potential measurements and linear polarization resistance tests were taken every 28 days for that purpose. It was found that the addition of 10% and 20% UtSCBA reduces the workability of the mortar binders and leads to a slight decrease in the CS of hardened mortars. However, it significantly reduced the of the mortars by 50% and 65% ( ), respectively, and also decreased the corrosion risk of mortar slabs over time.- 1 April 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (4)
Long-Term Corrosion Risk of Thin Cement Composites Containing Untreated Sugarcane Bagasse Ash
The corrosion risk in reinforced mortar slabs containing untreated sugarcane bagasse ash (UtSCBA) (0%, 10%, and 20% replacement of cement) was analyzed for 75 months. The mortars were prepared with a constant 0.63 water/cementitious-materials ratio. Cylinders and reinforced slabs were cast with the mortars. Two galvanized wire meshes were used as reinforcement for the slabs. Curing regimes of 0, 7, and 28 days were applied to the samples. The cylinders were used to obtain the compressive strength (CS) and the chloride diffusion coefficient ( ) of the mortars. To evaluate the corrosion risk, the slabs were exposed to wet-dry cycles of 12 h each in a 3% NaCl solution. Corrosion potential measurements and linear polarization resistance tests were taken every 28 days for that purpose. It was found that the addition of 10% and 20% UtSCBA reduces the workability of the mortar binders and leads to a slight decrease in the CS of hardened mortars. However, it significantly reduced the of the mortars by 50% and 65% ( ), respectively, and also decreased the corrosion risk of mortar slabs over time.- Open Access
- 30 March 2018
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 68 (329) , e148
The influence of untreated sugarcane bagasse ash on the microstructural and mechanical properties of mortars
This study investigated the effects of the addition of untreated sugarcane bagasse ash (UtSCBA) on the microstructural and mechanical properties of mortars. The SCBA was sieved for only five minutes through a No. 200 ASTM mesh, and fully characterized by chemical composition analysis, laser ray diffraction, the physical absorption of gas, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Mortar mixtures with 0, 10 and 20% UtSCBA as cement replacement and a constant 0.63 water/cementitious material ratio were prepared. Fresh properties of the mortars were obtained. The microstructural characteristics of the mortars at 1, 7, 28, 90 and 600 days were evaluated by SEM and XRD. The compressive strengths of the mortars at the same ages were then obtained. The results show that the addition of 10 and 20% UtSCBA caused a slight decrease in workability of the mortars but improved their microstructure, increasing the long-term compressive strength.
- 30 March 2018
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 68 (329) , e148
Open AccessThe influence of untreated sugarcane bagasse ash on the microstructural and mechanical properties of mortars
This study investigated the effects of the addition of untreated sugarcane bagasse ash (UtSCBA) on the microstructural and mechanical properties of mortars. The SCBA was sieved for only five minutes through a No. 200 ASTM mesh, and fully characterized by chemical composition analysis, laser ray diffraction, the physical absorption of gas, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Mortar mixtures with 0, 10 and 20% UtSCBA as cement replacement and a constant 0.63 water/cementitious material ratio were prepared. Fresh properties of the mortars were obtained. The microstructural characteristics of the mortars at 1, 7, 28, 90 and 600 days were evaluated by SEM and XRD. The compressive strengths of the mortars at the same ages were then obtained. The results show that the addition of 10 and 20% UtSCBA caused a slight decrease in workability of the mortars but improved their microstructure, increasing the long-term compressive strength.
- 2 March 2012
- Published by Wiley in Materials and Corrosion
- Vol. 64 (7) , 599-608
Epoxy‐coated bars as corrosion control in cracked reinforced concrete
One of the most common corrosion protection methods in reinforcing concrete bars is the application of fusion‐bonded epoxy coatings. Although considerable research has been carried out on the performance of epoxy‐coated bars (ECR), there are still many uncertainties about their performance in cracked concrete. In this experimental program, reinforcing steel bars with six types of epoxy coatings embedded in concrete slabs with a 0.4 mm wide preformed crack intersecting the reinforcing steel at right angles were tested. Results of corrosion potentials, corrosion current density, coating adhesion tests, chloride content, and visual examination after 68 months of exposure to a simulated marine environment are reported. Results revealed that under the studied conditions the ECR did not provide total protection of steel reinforcement in cracked concrete. Their use however, tended to reduce significantly the damage caused by the chloride‐induced corrosion when compared with the uncoated bars embedded in concrete with similar characteristics.
- 2 March 2012
- Published by Wiley in Materials and Corrosion
- Vol. 64 (7) , 599-608
Epoxy‐coated bars as corrosion control in cracked reinforced concrete
One of the most common corrosion protection methods in reinforcing concrete bars is the application of fusion‐bonded epoxy coatings. Although considerable research has been carried out on the performance of epoxy‐coated bars (ECR), there are still many uncertainties about their performance in cracked concrete. In this experimental program, reinforcing steel bars with six types of epoxy coatings embedded in concrete slabs with a 0.4 mm wide preformed crack intersecting the reinforcing steel at right angles were tested. Results of corrosion potentials, corrosion current density, coating adhesion tests, chloride content, and visual examination after 68 months of exposure to a simulated marine environment are reported. Results revealed that under the studied conditions the ECR did not provide total protection of steel reinforcement in cracked concrete. Their use however, tended to reduce significantly the damage caused by the chloride‐induced corrosion when compared with the uncoated bars embedded in concrete with similar characteristics.
- 31 December 2010
- Published by Elsevier in Construction and Building Materials
- Vol. 24 (12) , 2650-2657
Mineralogical effect on the pozzolanic reactivity of a Mexican lacustrine soil
- 31 December 2010
- Published by Elsevier in Construction and Building Materials
- Vol. 24 (12) , 2650-2657
Mineralogical effect on the pozzolanic reactivity of a Mexican lacustrine soil
- Open Access
- 1 December 2009
- Published by Pontificia Universidad Catolica de Chile in Revista ingeniería de construcción
- Vol. 24 (3) , 233-244
Eficacia de inhibidores de nitrito de calcio (CNI) en concreto agrietado
En el presente estudio se investigó la eficacia de un inhibidor a base de nitrito de calcio como método para prevenir la corrosión de acero de refuerzo en losas de concreto agrietado. Para tal efecto se desarrolló un diseño factorial para evaluar el efecto del agrietamiento en concreto considerando ancho de grieta y relación agua/cemento como factores. Luego, se evaluó el efecto de una dosis constante de 25 l/m³ de inhibidor de nitrito de calcio(CNI) en concreto con una relación A/C de 0.4 que contenía diferentes anchos de grieta. La variable respuesta fue la densidad de corrosión obtenida mediante lecturas de resistencia de polarización lineal en losas pequeñas de concreto armado que tenían recubrimiento de 20 mm. Las losas fueron expuestas a un ambiente marino natural durante cinco años con dos ciclos de humedecimiento y secado por día en la bahía de Fundy, Maine, EE.UU. Las muestras también fueron inspeccionadas visualmente de manera regular y el daño en la superficie registrado. Se constató que para la mayoría de los casos, el uso de inhibidor a base de CNI fue benéfico tanto en concreto agrietado como en no agrietado.
- 1 December 2009
- Published by Pontificia Universidad Catolica de Chile in Revista ingeniería de construcción
- Vol. 24 (3) , 233-244
Open AccessEficacia de inhibidores de nitrito de calcio (CNI) en concreto agrietado
En el presente estudio se investigó la eficacia de un inhibidor a base de nitrito de calcio como método para prevenir la corrosión de acero de refuerzo en losas de concreto agrietado. Para tal efecto se desarrolló un diseño factorial para evaluar el efecto del agrietamiento en concreto considerando ancho de grieta y relación agua/cemento como factores. Luego, se evaluó el efecto de una dosis constante de 25 l/m³ de inhibidor de nitrito de calcio(CNI) en concreto con una relación A/C de 0.4 que contenía diferentes anchos de grieta. La variable respuesta fue la densidad de corrosión obtenida mediante lecturas de resistencia de polarización lineal en losas pequeñas de concreto armado que tenían recubrimiento de 20 mm. Las losas fueron expuestas a un ambiente marino natural durante cinco años con dos ciclos de humedecimiento y secado por día en la bahía de Fundy, Maine, EE.UU. Las muestras también fueron inspeccionadas visualmente de manera regular y el daño en la superficie registrado. Se constató que para la mayoría de los casos, el uso de inhibidor a base de CNI fue benéfico tanto en concreto agrietado como en no agrietado.