Paromita Chakraborty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Paromita Chakraborty has a total of 255 co-authors. Here are the top co-authors by number of shared publications:
Moitraiyee Mukhopadhyay
Environmental Science and Technology Lab, Centre for Research in Environment, Sustainability Advocacy and Climate Change, Directorate of Research, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu District, India
13 shared publicationsGirija K. Bharat
Mu Gamma Consultants Pvt Ltd, Gurugram, Haryana, India
9 shared publicationsSanjenbam Nirmala Khuman
Environmental Science and Technology Laboratory, Department of Chemical Engineering, SRM Institute of Science and Technology, Kattankulathur, India
9 shared publicationsSakthivel Selvaraj
SRM Research Institute and Department of Civil Engineering, SRM Institute of Science and Technology, Kattankulathur, India
8 shared publicationsBalasubramanian Prithiviraj
SRM Research Institute and Department of Civil Engineering SRM Institute of Science and Technology, Kancheepuram District, Tamil Nadu 603203, India4
7 shared publicationsOmkar Gaonkar
Nuevo Chakra (OPC) Pvt Ltd
7 shared publications
Latest Publications
- Open Access
- 13 April 2026
- Published by Elsevier in Environmental Pollution
- Vol. 403, 128131
Per- and polyfluoroalkyl substances (PFASs) in rivers of southern India: Spatial distribution, sources, and ecotoxicological and human health risk assessments
- 13 April 2026
- Published by Elsevier in Environmental Pollution
- Vol. 403, 128131
Open AccessPer- and polyfluoroalkyl substances (PFASs) in rivers of southern India: Spatial distribution, sources, and ecotoxicological and human health risk assessments
- Open Access
- 11 February 2026
- Published by MDPI AG in Chemengineering
- Vol. 10 (2) , 30
Adsorption of Perfluorooctanoic Acid from Aqueous Media Using an Engineered Sugarcane Bagasse Biochar–Chitosan Composite
In the recent years, several studies from developing economies have reported the presence of per- and polyfluoroalkyl substances (PFAS) in water bodies, with perfluorooctanoic acid (PFOA) predominating, a potential endocrine disruptor. In this study, an engineered sugarcane bagasse biochar–chitosan composite (SBCT) was designed, synthesized, and evaluated as a novel adsorbent for the removal of PFOA from aqueous systems at concentrations up to 500 ppb. Batch adsorption experiments were conducted to investigate the effects of initial PFOA concentration, contact time, pH, adsorbent dosage, and temperature. Scanning electron microscopy (SEM) showed that SBCT has a significant porous structure. The composite showed over 90% of PFOA removal from water. Further, peaks corresponding to C–F bonds observed after adsorption by Fourier transform infrared (FTIR) spectroscopy confirms the adsorption of PFOA on SBCT. The protonated amine groups (NH3+) in chitosan enhanced the adsorption of anionic PFOA through electrostatic attraction with carboxyl groups (COO−). The kinetic study revealed that pseudo-first-order best described the adsorption process, with an equilibrium adsorption capacity (qeq) of 2.78 mg/g, suggesting that physisorption is the predominant mechanism. The Langmuir Isotherm model gave the best fit, establishing a maximum adsorption capacity (qmax) of 9.08 mg/g. Thermodynamic analysis revealed that the adsorption process was spontaneous and exothermic, consistent with physisorption. The regeneration capacity of the SBCT composite demonstrated exceptional reusability over five methanol adsorption–desorption cycles. The adsorption kinetics, equilibrium behavior, and regeneration efficiency suggest that SBCT is a viable low-cost adsorbent for batch adsorption-based treatment systems targeting PFOA removal, particularly in decentralized and resource-constrained water treatment applications.
- 11 February 2026
- Published by MDPI AG in Chemengineering
- Vol. 10 (2) , 30
Open AccessAdsorption of Perfluorooctanoic Acid from Aqueous Media Using an Engineered Sugarcane Bagasse Biochar–Chitosan Composite
In the recent years, several studies from developing economies have reported the presence of per- and polyfluoroalkyl substances (PFAS) in water bodies, with perfluorooctanoic acid (PFOA) predominating, a potential endocrine disruptor. In this study, an engineered sugarcane bagasse biochar–chitosan composite (SBCT) was designed, synthesized, and evaluated as a novel adsorbent for the removal of PFOA from aqueous systems at concentrations up to 500 ppb. Batch adsorption experiments were conducted to investigate the effects of initial PFOA concentration, contact time, pH, adsorbent dosage, and temperature. Scanning electron microscopy (SEM) showed that SBCT has a significant porous structure. The composite showed over 90% of PFOA removal from water. Further, peaks corresponding to C–F bonds observed after adsorption by Fourier transform infrared (FTIR) spectroscopy confirms the adsorption of PFOA on SBCT. The protonated amine groups (NH3+) in chitosan enhanced the adsorption of anionic PFOA through electrostatic attraction with carboxyl groups (COO−). The kinetic study revealed that pseudo-first-order best described the adsorption process, with an equilibrium adsorption capacity (qeq) of 2.78 mg/g, suggesting that physisorption is the predominant mechanism. The Langmuir Isotherm model gave the best fit, establishing a maximum adsorption capacity (qmax) of 9.08 mg/g. Thermodynamic analysis revealed that the adsorption process was spontaneous and exothermic, consistent with physisorption. The regeneration capacity of the SBCT composite demonstrated exceptional reusability over five methanol adsorption–desorption cycles. The adsorption kinetics, equilibrium behavior, and regeneration efficiency suggest that SBCT is a viable low-cost adsorbent for batch adsorption-based treatment systems targeting PFOA removal, particularly in decentralized and resource-constrained water treatment applications.
- 26 December 2025
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 48 (2) , 70
Source-specific health risks of metallic elements in road dust from coal mining affected urban areas using an integrated PMF–HHR–Monte Carlo framework
Metallic element (ME) contamination in urban road dust poses critical environmental and health challenges, particularly in Dhanbad, eastern India, representing one of the most intensively coal-mining–impacted urban regions in India, with over 112 active and abandoned mines, extensive overburden dumps, and widespread coal transportation corridors. This study systematically analyzed 44 composite road dust samples to quantify multiple MEs. Spatial interpolations, various geochemical indices, integrated Positive Matrix Factorization (PMF)- human health risk (HHR) framework based on Monte Carlo simulation was applied to comprehend the risk assessment. Excluding Al, all MEs exceeded their background value. Geochemical indices revealed moderate to very high contamination levels, particularly from Cd, As, and Cr. Spatial interpolation maps highlighted that coal mining zones, overburden dumps, and traffic-dense corridors, were the most polluted sites, prevailing in the central and NW–SE directions. Four major source factors of pollution were identified as mixed sources (F1), coal mining operations (F2), automotive and industrial emissions (F3), and lithogenic/overburden rock (F4). Multivariate statistical analyses further corroborated the findings of PMF. The integrated PMF-HHR framework, coupled with Monte Carlo simulation, revealed substantial non-carcinogenic (NCR) and carcinogenic risks (CR) for both adults and children. F2 followed by F3 were the predominant contributors to human health risks. Overall, the integrated PMF–HHR framework effectively linked source contributions to quantified health outcomes, providing a reliable tool for source-oriented risk management and mitigation in coal mining–affected urban environments.
- 26 December 2025
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 48 (2) , 70
Source-specific health risks of metallic elements in road dust from coal mining affected urban areas using an integrated PMF–HHR–Monte Carlo framework
Metallic element (ME) contamination in urban road dust poses critical environmental and health challenges, particularly in Dhanbad, eastern India, representing one of the most intensively coal-mining–impacted urban regions in India, with over 112 active and abandoned mines, extensive overburden dumps, and widespread coal transportation corridors. This study systematically analyzed 44 composite road dust samples to quantify multiple MEs. Spatial interpolations, various geochemical indices, integrated Positive Matrix Factorization (PMF)- human health risk (HHR) framework based on Monte Carlo simulation was applied to comprehend the risk assessment. Excluding Al, all MEs exceeded their background value. Geochemical indices revealed moderate to very high contamination levels, particularly from Cd, As, and Cr. Spatial interpolation maps highlighted that coal mining zones, overburden dumps, and traffic-dense corridors, were the most polluted sites, prevailing in the central and NW–SE directions. Four major source factors of pollution were identified as mixed sources (F1), coal mining operations (F2), automotive and industrial emissions (F3), and lithogenic/overburden rock (F4). Multivariate statistical analyses further corroborated the findings of PMF. The integrated PMF-HHR framework, coupled with Monte Carlo simulation, revealed substantial non-carcinogenic (NCR) and carcinogenic risks (CR) for both adults and children. F2 followed by F3 were the predominant contributors to human health risks. Overall, the integrated PMF–HHR framework effectively linked source contributions to quantified health outcomes, providing a reliable tool for source-oriented risk management and mitigation in coal mining–affected urban environments.
- 17 December 2025
- Published by Elsevier in Science of The Total Environment
- Vol. 1011, 181075
Spatial distribution and sediment-water fluxes of organochlorine pesticides in Daman Ganga and Tapi rivers, Gujarat, India
- 17 December 2025
- Published by Elsevier in Science of The Total Environment
- Vol. 1011, 181075
Spatial distribution and sediment-water fluxes of organochlorine pesticides in Daman Ganga and Tapi rivers, Gujarat, India
- 11 May 2025
- Published by Elsevier in Food and Chemical Toxicology
- Vol. 202, 115511
Investigation of exposure factors for toxic metals in the hair of traffic police officers in Tehran, Iran
- 11 May 2025
- Published by Elsevier in Food and Chemical Toxicology
- Vol. 202, 115511
Investigation of exposure factors for toxic metals in the hair of traffic police officers in Tehran, Iran
- 20 November 2024
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 46 (12) , 1-17
Mercury in saliva, milk, and hair of nursing mothers in southeastern Iranian mothers: levels, distribution and risk assessment
This research is on lactating mothers in the city of Chah Bahar in Iran. This descriptive-analytical and questionnaire study selected a random sample of 80 mothers to examine mercury levels in their hair, milk, and saliva. The average concentration of mercury in milk, hair and saliva of mothers was 1.23 ± 0.48 µg/l, 1.81 ± 0.55 µg/g and 1.10 ± 0.63 µg/l, respectively. There was a significant correlation between mercury levels in mothers saliva and hair. Still, only a weak correlation was found between mercury levels in milk and hair, and milk and saliva, possibly associated with the high lipid content in milk. The number of children and length of the mother's pregnancy were related to the amount of mercury in the mother's milk. The number of teeth filled with amalgam, consumption of fish and marine products, consumption of fruit, and infant's weight at birth were also associated with the amount of mercury in breast milk. Chewing gum, fish consumption, infant's birth weight, weight, and length of pregnancy were among the factors associated with the amount of mercury in mothers' saliva. The mercury concentration in milk exceeded the WHO (1.4–1.7 µg/g) normal level in 8.5% mothers, and hair mercury was found in 12.5% mothers. It should be kept in mind that any amount of mercury can be harmful.
- 20 November 2024
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 46 (12) , 1-17
Mercury in saliva, milk, and hair of nursing mothers in southeastern Iranian mothers: levels, distribution and risk assessment
This research is on lactating mothers in the city of Chah Bahar in Iran. This descriptive-analytical and questionnaire study selected a random sample of 80 mothers to examine mercury levels in their hair, milk, and saliva. The average concentration of mercury in milk, hair and saliva of mothers was 1.23 ± 0.48 µg/l, 1.81 ± 0.55 µg/g and 1.10 ± 0.63 µg/l, respectively. There was a significant correlation between mercury levels in mothers saliva and hair. Still, only a weak correlation was found between mercury levels in milk and hair, and milk and saliva, possibly associated with the high lipid content in milk. The number of children and length of the mother's pregnancy were related to the amount of mercury in the mother's milk. The number of teeth filled with amalgam, consumption of fish and marine products, consumption of fruit, and infant's weight at birth were also associated with the amount of mercury in breast milk. Chewing gum, fish consumption, infant's birth weight, weight, and length of pregnancy were among the factors associated with the amount of mercury in mothers' saliva. The mercury concentration in milk exceeded the WHO (1.4–1.7 µg/g) normal level in 8.5% mothers, and hair mercury was found in 12.5% mothers. It should be kept in mind that any amount of mercury can be harmful.
- 1 October 2024
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 46 (11) , 1-17
Pharmaceuticals and personal care products contamination in the rivers of Chennai city during the COVID-19 pandemic
Pharmaceuticals and personal care products (PPCPs) monitoring in surface water is crucial to address the escalating threat of antimicrobial resistance and safeguard public health. This study aimed to investigate the occurrence of 21 different PPCPs, including wastewater chemical markers, antibiotics, and parabens in the surface water of Chennai city using Ultra Performance Liquid Chromatography—Triple Quadrupole Mass Spectrometry (UPLC-MS/MS) analysis. It is noteworthy that chemical markers viz., carbamazepine (CBZ) and caffeine (CAF) were detected in all the sites and contributed to more than 95% of the total PPCPs load indicating a significant intrusion of wastewater. Among the antibiotics, fluoroquinolones were dominant in this study. Interestingly, a significant and strong correlation was seen between fluoroquinolones, CBZ and CAF (R2 = 0.880–0.928, p < 0.05), suggesting similarities in their sources. More than 50% of the sites exhibited a risk for antimicrobial resistance (RQAMR) with RQAMR > 1 for ciprofloxacin, indicating a significant public health concern. The ecotoxicological risk assessment of PPCPs showed no risk to any organisms, except for triclosan, which posed a risk to fish and daphnids at one site near an open drain in Buckingham canal. Graphical abstract
- 1 October 2024
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 46 (11) , 1-17
Pharmaceuticals and personal care products contamination in the rivers of Chennai city during the COVID-19 pandemic
Pharmaceuticals and personal care products (PPCPs) monitoring in surface water is crucial to address the escalating threat of antimicrobial resistance and safeguard public health. This study aimed to investigate the occurrence of 21 different PPCPs, including wastewater chemical markers, antibiotics, and parabens in the surface water of Chennai city using Ultra Performance Liquid Chromatography—Triple Quadrupole Mass Spectrometry (UPLC-MS/MS) analysis. It is noteworthy that chemical markers viz., carbamazepine (CBZ) and caffeine (CAF) were detected in all the sites and contributed to more than 95% of the total PPCPs load indicating a significant intrusion of wastewater. Among the antibiotics, fluoroquinolones were dominant in this study. Interestingly, a significant and strong correlation was seen between fluoroquinolones, CBZ and CAF (R2 = 0.880–0.928, p < 0.05), suggesting similarities in their sources. More than 50% of the sites exhibited a risk for antimicrobial resistance (RQAMR) with RQAMR > 1 for ciprofloxacin, indicating a significant public health concern. The ecotoxicological risk assessment of PPCPs showed no risk to any organisms, except for triclosan, which posed a risk to fish and daphnids at one site near an open drain in Buckingham canal. Graphical abstract