Yi Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yi Sun has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Dario Floreano
Laboratory of Intelligent Systems, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
3 shared publications - Jianglong Guo
School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen, China
3 shared publications - Rui Chen
Chongqing University
3 shared publications - Chee-Kong Chui
National University of Singapore
2 shared publications - Chen-Hua Yeow
National University of Singapore
2 shared publications - Haris Cheong
Department of Biomedical Engineering, National University of Singapore, Singapore
2 shared publications
Latest Publications
- Open Access
- 12 March 2026
- Published by Wiley in Advanced Robotics Research
3D‐Printing Aided Rapid Prototyping of Pretensioned Tensegrity Structures for Robotic Applications
Tensegrity structures have garnered significant attention due tounmatched low mass per load bearing unit and programable stiffness. However, traditional fabrication methods often rely on labor‐intensive manual assembly, which becomes particularly demanding for complex tensegrities requiring precise pretensioning equilibrium. While recent advances have improved fabrication of simple tensegrity modules, large and intricate tensegrities remain difficult to produce. In this article, we present a fabrication method that relies on modular mold design, injection molding, and compact channel layout to facilitate the rapid prototyping and manual assembly of large, complex tensegrity systems with equilibrated pretension. The proposed method also enables the design and fabrication of modular tensegrity structures with diverse stiffness regions to match desired load bearing capabilities or deform in desired configurations under external or internal force. The method is validated with the design, fabrication, and demonstration of two tensegrity robots, a gripper and a quadruped. The method substantially reduces the manual production of diverse and modular tensegrity structures with desired load‐bearing capabilities and deformations, and makes the tensegrity prototyping easier, faster, and more controllable, thus paving the way to the design of a variety of lightweight tensegrity structures at multiple scales.
- 12 March 2026
- Published by Wiley in Advanced Robotics Research
Open Access3D‐Printing Aided Rapid Prototyping of Pretensioned Tensegrity Structures for Robotic Applications
Tensegrity structures have garnered significant attention due tounmatched low mass per load bearing unit and programable stiffness. However, traditional fabrication methods often rely on labor‐intensive manual assembly, which becomes particularly demanding for complex tensegrities requiring precise pretensioning equilibrium. While recent advances have improved fabrication of simple tensegrity modules, large and intricate tensegrities remain difficult to produce. In this article, we present a fabrication method that relies on modular mold design, injection molding, and compact channel layout to facilitate the rapid prototyping and manual assembly of large, complex tensegrity systems with equilibrated pretension. The proposed method also enables the design and fabrication of modular tensegrity structures with diverse stiffness regions to match desired load bearing capabilities or deform in desired configurations under external or internal force. The method is validated with the design, fabrication, and demonstration of two tensegrity robots, a gripper and a quadruped. The method substantially reduces the manual production of diverse and modular tensegrity structures with desired load‐bearing capabilities and deformations, and makes the tensegrity prototyping easier, faster, and more controllable, thus paving the way to the design of a variety of lightweight tensegrity structures at multiple scales.
- Top Cited PapersOpen Access
- 7 February 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (6) , eadn1207
Instant variable stiffness in cardiovascular catheters based on fiber jamming
Variable stiffness (VS) has revolutionized miniature surgical instruments, including cardiovascular catheters for minimally invasive surgeries (MISs), enabling advanced capabilities in stiffness modulation and multi-curvature bending. However, existing VS catheters with phase-changing materials are slow in softening and stiffening rates (≈90 s), which can lead to substantial increase in surgery duration. To address the slow stiffness change, we propose a VS catheter based on fiber jamming (FJ) that achieves instant stiffness changes (≤300 ms), enabling seamless catheter operations without delays. Moreover, our catheter, incorporating hundreds of ultrathin fibers into a slender 2.3-mm catheter body, achieves up to 6.5-fold stiffness changes. With adequate stiffness change, our two-segment catheter achieves complex bending profiles within seconds. In addition, the FJ-based design does not require electric currents or heating inside the human body, minimizing patient risks. This FJ-based VS catheter, with instantaneous response, adequate stiffness change, and enhanced safety, can potentially establish benchmarks in MIS, allowing medical practitioners to effectively address formidable diseases.
- 7 February 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (6) , eadn1207
Top Cited PapersOpen AccessInstant variable stiffness in cardiovascular catheters based on fiber jamming
Variable stiffness (VS) has revolutionized miniature surgical instruments, including cardiovascular catheters for minimally invasive surgeries (MISs), enabling advanced capabilities in stiffness modulation and multi-curvature bending. However, existing VS catheters with phase-changing materials are slow in softening and stiffening rates (≈90 s), which can lead to substantial increase in surgery duration. To address the slow stiffness change, we propose a VS catheter based on fiber jamming (FJ) that achieves instant stiffness changes (≤300 ms), enabling seamless catheter operations without delays. Moreover, our catheter, incorporating hundreds of ultrathin fibers into a slender 2.3-mm catheter body, achieves up to 6.5-fold stiffness changes. With adequate stiffness change, our two-segment catheter achieves complex bending profiles within seconds. In addition, the FJ-based design does not require electric currents or heating inside the human body, minimizing patient risks. This FJ-based VS catheter, with instantaneous response, adequate stiffness change, and enhanced safety, can potentially establish benchmarks in MIS, allowing medical practitioners to effectively address formidable diseases.
- 14 November 2022
- Published by Elsevier in Applied Materials Today
- Vol. 29
Design of multi-stimuli responsive hybrid pneumatic – magnetic soft actuator with novel channel integration
- 14 November 2022
- Published by Elsevier in Applied Materials Today
- Vol. 29
Design of multi-stimuli responsive hybrid pneumatic – magnetic soft actuator with novel channel integration
- Open Access
- 30 October 2022
- Published by Wiley in Advanced Intelligent Systems
- Vol. 4 (11)
Powerful 2D Soft Morphing Actuator Propels Giant Manta Ray Robot
Soft actuator is the main technology that drives the development of soft robotics as it defines the capabilities of soft machines. One of the key challenges in soft actuator research is to simultaneously produce complex morphing (e.g., surface morphing) and high force. Therefore, a soft robotic pad (SRP) was developed as a new soft actuator that can potentially tackle this challenge. This article demonstrates the highly flexible customization process of the SRP regarding fabrication, morphing design, and force scaling for a challenging application: a giant manta ray robot with the Mobuliform swimming mode. Soft robotic pectoral fins (SRPFs) are customized using the SRP technology for the robot. Detailed characterization results show that the SRPFs can generate almost 100 N force or 25 Nm torque with a dual curving motion to mimic the manta ray fin kinematics. The SRPFs are able to propel the manta ray robot to a decent swimming speed with biomimetic fin motions. As a new member of the soft actuator family, SRPs exhibit strong capabilities through this manta ray robot, and they can potentially become unique tools for many engineers and researchers to tackle challenging applications requiring high force and surface morphing.
- 30 October 2022
- Published by Wiley in Advanced Intelligent Systems
- Vol. 4 (11)
Open AccessPowerful 2D Soft Morphing Actuator Propels Giant Manta Ray Robot
Soft actuator is the main technology that drives the development of soft robotics as it defines the capabilities of soft machines. One of the key challenges in soft actuator research is to simultaneously produce complex morphing (e.g., surface morphing) and high force. Therefore, a soft robotic pad (SRP) was developed as a new soft actuator that can potentially tackle this challenge. This article demonstrates the highly flexible customization process of the SRP regarding fabrication, morphing design, and force scaling for a challenging application: a giant manta ray robot with the Mobuliform swimming mode. Soft robotic pectoral fins (SRPFs) are customized using the SRP technology for the robot. Detailed characterization results show that the SRPFs can generate almost 100 N force or 25 Nm torque with a dual curving motion to mimic the manta ray fin kinematics. The SRPFs are able to propel the manta ray robot to a decent swimming speed with biomimetic fin motions. As a new member of the soft actuator family, SRPs exhibit strong capabilities through this manta ray robot, and they can potentially become unique tools for many engineers and researchers to tackle challenging applications requiring high force and surface morphing.
- Open Access
- 13 May 2022
- Published by Wiley in Advanced Intelligent Systems
- Vol. 4 (7)
Dual Stiffness Tensegrity Platform for Resilient Robotics
Collision resilience is an important feature of robots deployed in unstructured and partially unpredictable environments. Herein, a novel dual stiffness (DS) tensegrity platform to integrate collision resilience into a robot body is proposed. The proposed DS tensegrity platform is rigid during normal robot operation, but softens upon collision to withstand the impact. The DS behavior is achieved by means of a novel DS strut that is rigid, but can buckle without breaking under high loads, thus preventing damage to the robot. Compression tests and finite element method simulations show that both the DS struts and DS tensegrities undergo substantial stiffness change with maximum load‐bearing ratios up to 10.5 and 5.74, respectively, before and after buckling. These DS tensegrity structures are integrated into two types of robots, a drone and a rover, that are shown to withstand falls from 2 and 5 m, respectively. The mechanical tunability of the proposed DS tensegrity system makes it suitable for impact attenuation in a wide range of situations and robot types.
- 13 May 2022
- Published by Wiley in Advanced Intelligent Systems
- Vol. 4 (7)
Open AccessDual Stiffness Tensegrity Platform for Resilient Robotics
Collision resilience is an important feature of robots deployed in unstructured and partially unpredictable environments. Herein, a novel dual stiffness (DS) tensegrity platform to integrate collision resilience into a robot body is proposed. The proposed DS tensegrity platform is rigid during normal robot operation, but softens upon collision to withstand the impact. The DS behavior is achieved by means of a novel DS strut that is rigid, but can buckle without breaking under high loads, thus preventing damage to the robot. Compression tests and finite element method simulations show that both the DS struts and DS tensegrities undergo substantial stiffness change with maximum load‐bearing ratios up to 10.5 and 5.74, respectively, before and after buckling. These DS tensegrity structures are integrated into two types of robots, a drone and a rover, that are shown to withstand falls from 2 and 5 m, respectively. The mechanical tunability of the proposed DS tensegrity system makes it suitable for impact attenuation in a wide range of situations and robot types.
- 27 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2956-2961
A Static Model for a Stiffness-Adjustable Snake-Like Robot
In minimally invasive surgery, miniaturisation and in situ adjustable stiffness of robotic manipulators are desired features. Previous research proposed a simple and effective tendon-driven curve-joint manipulator design using a variable neutral-line mechanism, which highly satisfies both criteria. A kinematic model was developed for such a manipulator based on the geometry of the structure. However, such a model assumes that joint angles are all equal between disks without a rigorous derivation, and fails if not all the shapes of the disks are identical. Moreover, the model does not involve an analysis of the tension of each tendon. This paper suggested a static model for predicting the articulation of such a manipulator given the applied tensions on driving tendons. It validates the assumption of equally distributed joint angles and works for manipulators with more general configurations of disks and tendons. It also sets a foundation for further development of tension based control and external force estimation. Simulations on Adams were conducted to prove the correctness of the proposed model. A video demonstrating the simulation results can be found via https://youtu.be/MXhL1LGwLtw
- 27 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2956-2961
A Static Model for a Stiffness-Adjustable Snake-Like Robot
In minimally invasive surgery, miniaturisation and in situ adjustable stiffness of robotic manipulators are desired features. Previous research proposed a simple and effective tendon-driven curve-joint manipulator design using a variable neutral-line mechanism, which highly satisfies both criteria. A kinematic model was developed for such a manipulator based on the geometry of the structure. However, such a model assumes that joint angles are all equal between disks without a rigorous derivation, and fails if not all the shapes of the disks are identical. Moreover, the model does not involve an analysis of the tension of each tendon. This paper suggested a static model for predicting the articulation of such a manipulator given the applied tensions on driving tendons. It validates the assumption of equally distributed joint angles and works for manipulators with more general configurations of disks and tendons. It also sets a foundation for further development of tension based control and external force estimation. Simulations on Adams were conducted to prove the correctness of the proposed model. A video demonstrating the simulation results can be found via https://youtu.be/MXhL1LGwLtw
- 19 February 2021
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 30 (4) , 045002
A paper fortune teller-inspired reconfigurable soft pneumatic gripper
Soft pneumatic grippers (SPGs) have shown great grasping performances for various objects due to their simplicity, adaptability and rapid response. However, there are few SPGs that can grasp both flat and non-planar targets robustly. A reconfigurable mechanism that can transform the gripper into different states for grasping varied objects is desired by such versatile SPGs. Paper fortune teller (PFT) is a distinctive origami with 2D/3D shape switchability and 3D shape reconfigurability. In this paper, we propose a novel reconfigurable SPG which is inspired from PFT and augmented with an indirect vacuum adhesion (IVA) mechanism. The resultant gripper can not only lift flat-surface objects such as a piece of square glass (278 g) with the IVA force in its pad shape, but also pick up non-planar objects such as an orange (151 g) in a traditional grasping way in its four-converging-fingered shape. The experimental results reveal that our gripper can produce a maximum IVA force of about 4.24 N on acrylic plates and a maximum pulling force of about 2.10 N on 3D-printed non-planar objects respectively. The gripper’s traditional grasping robustness is also demonstrated when non-planar objects are placed irregularly (allowing up to 55 mm multi-orientation offsets or 20° multi-orientation drift angles). This new SPG design realizes the multi-function nature of origami transformation and is expected to promote the application of origami and soft gripper technologies.
- 19 February 2021
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 30 (4) , 045002
A paper fortune teller-inspired reconfigurable soft pneumatic gripper
Soft pneumatic grippers (SPGs) have shown great grasping performances for various objects due to their simplicity, adaptability and rapid response. However, there are few SPGs that can grasp both flat and non-planar targets robustly. A reconfigurable mechanism that can transform the gripper into different states for grasping varied objects is desired by such versatile SPGs. Paper fortune teller (PFT) is a distinctive origami with 2D/3D shape switchability and 3D shape reconfigurability. In this paper, we propose a novel reconfigurable SPG which is inspired from PFT and augmented with an indirect vacuum adhesion (IVA) mechanism. The resultant gripper can not only lift flat-surface objects such as a piece of square glass (278 g) with the IVA force in its pad shape, but also pick up non-planar objects such as an orange (151 g) in a traditional grasping way in its four-converging-fingered shape. The experimental results reveal that our gripper can produce a maximum IVA force of about 4.24 N on acrylic plates and a maximum pulling force of about 2.10 N on 3D-printed non-planar objects respectively. The gripper’s traditional grasping robustness is also demonstrated when non-planar objects are placed irregularly (allowing up to 55 mm multi-orientation offsets or 20° multi-orientation drift angles). This new SPG design realizes the multi-function nature of origami transformation and is expected to promote the application of origami and soft gripper technologies.
- 11 September 2020
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 29 (10) , 105028
Variable stiffness soft pneumatic grippers augmented with active vacuum adhesion
Soft pneumatic grippers (SPGs), made of highly stretchable elastomer materials with internal fluidic channels, are a popular soft robotic gripping technology, and have been configured as soft bending fingers for passively compliant grasping applications. It is challenging, however, for current SPGs to grip both flat, concave, and convex surfaces. Controllable adhesion augmented SPGs are promising solutions. We aim to develop a composite gripper structure that could enable SPGs with the capability to lift flat, concave, and convex surfaces using pneumatic inputs only. To this end, we present PneuIVAVS, a layer-jamming induced active vacuum adhesion (VA) augmented and variable stiffness (VS) fiber-reinforced SPG. This integrated PneuIVAVS design has enabled the gripper to generate a VA force without the requirement that all suction units should work. Also, a VA force analytical model and a shape-locking model of the PneuIVAVS design were developed and experimentally validated. In addition, the PneuIVAVS gripper presented good performance on gripping both flat, concave and convex objects with a range of contacting areas. According to the load capacity test, the gripper could grasp a maximum of approximately 470 g, 683 g, and 268 g when handling flat, concave, and convex surfaces respectively. Besides, the gripper could grasp curved surfaces with a minimum radius of curvature between 30 and 40 mm. The PneuIVAVS concept, design, and results in this work have potential to promote the applications of SPGs and VA grippers in various material handling and robotics tasks.
- 11 September 2020
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 29 (10) , 105028
Variable stiffness soft pneumatic grippers augmented with active vacuum adhesion
Soft pneumatic grippers (SPGs), made of highly stretchable elastomer materials with internal fluidic channels, are a popular soft robotic gripping technology, and have been configured as soft bending fingers for passively compliant grasping applications. It is challenging, however, for current SPGs to grip both flat, concave, and convex surfaces. Controllable adhesion augmented SPGs are promising solutions. We aim to develop a composite gripper structure that could enable SPGs with the capability to lift flat, concave, and convex surfaces using pneumatic inputs only. To this end, we present PneuIVAVS, a layer-jamming induced active vacuum adhesion (VA) augmented and variable stiffness (VS) fiber-reinforced SPG. This integrated PneuIVAVS design has enabled the gripper to generate a VA force without the requirement that all suction units should work. Also, a VA force analytical model and a shape-locking model of the PneuIVAVS design were developed and experimentally validated. In addition, the PneuIVAVS gripper presented good performance on gripping both flat, concave and convex objects with a range of contacting areas. According to the load capacity test, the gripper could grasp a maximum of approximately 470 g, 683 g, and 268 g when handling flat, concave, and convex surfaces respectively. Besides, the gripper could grasp curved surfaces with a minimum radius of curvature between 30 and 40 mm. The PneuIVAVS concept, design, and results in this work have potential to promote the applications of SPGs and VA grippers in various material handling and robotics tasks.
- 25 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (3) , 4923-4930
A Chameleon Tongue Inspired Shooting Manipulator With Vision-Based Localization and Preying
Chameleon tongues are extremely rapid, ultra-stretchable, compact, and can capture preys located multi-directionally. Various chameleon tongue inspired shooting manipulators have therefore been developed. Little work, however, has been studied on the multi-directional preying capability of chameleon tongues. This letter aims to present a chameleon tongue inspired fully soft shooting manipulator with the ability of capturing delicate objects in a range of directions. To this end, we present a compact sliding catapult system (SCS) that could enable the manipulator to have ballistic motions and gentle capturing capabilities. The SCS was capable of projecting to a length of 52 cm at the speed of 5.7 m·s −1 , which is comparable to natural chameleon tongues. With viscoelastic gels (Polyisobutylene) attached at the tip, the manipulator can capture various delicate objects, including a leaf (0.20 g), a slice of dried tofu (6.19 g), and a balloon (0.91 g) in a tube. A chameleon inspired vision-based posture alignment platform has been built for multi-position prey capturing and proof-of-concept demonstrations were presented. The chameleon inspired multi-directional prey capturing platform is not only a successful representation of Chameleons’ prey capturing strategies but also offers an effective soft robotic manipulator for handling delicate objects in challenging environments.
- 25 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (3) , 4923-4930
A Chameleon Tongue Inspired Shooting Manipulator With Vision-Based Localization and Preying
Chameleon tongues are extremely rapid, ultra-stretchable, compact, and can capture preys located multi-directionally. Various chameleon tongue inspired shooting manipulators have therefore been developed. Little work, however, has been studied on the multi-directional preying capability of chameleon tongues. This letter aims to present a chameleon tongue inspired fully soft shooting manipulator with the ability of capturing delicate objects in a range of directions. To this end, we present a compact sliding catapult system (SCS) that could enable the manipulator to have ballistic motions and gentle capturing capabilities. The SCS was capable of projecting to a length of 52 cm at the speed of 5.7 m·s −1 , which is comparable to natural chameleon tongues. With viscoelastic gels (Polyisobutylene) attached at the tip, the manipulator can capture various delicate objects, including a leaf (0.20 g), a slice of dried tofu (6.19 g), and a balloon (0.91 g) in a tube. A chameleon inspired vision-based posture alignment platform has been built for multi-position prey capturing and proof-of-concept demonstrations were presented. The chameleon inspired multi-directional prey capturing platform is not only a successful representation of Chameleons’ prey capturing strategies but also offers an effective soft robotic manipulator for handling delicate objects in challenging environments.
- 15 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (2) , 2250
Erratum to “Design, Characterization, and Implementation of a Two-DOF Fabric-Based Soft Robotic Arm”
- 15 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (2) , 2250
Erratum to “Design, Characterization, and Implementation of a Two-DOF Fabric-Based Soft Robotic Arm”