Serhii Boiko
Serhii Boiko has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Oleksiy Gorodny
Chernihiv National University of Technology
11 shared publications - Oleksii Zhukov
Vinnytsia National Technical University
6 shared publications - Oleg Sinchuk
Kryvyi Rih Natl Univ, UA-50027 Kryvyi Rih, Ukraine
5 shared publications - Andrii Dymerets
Chernihiv National University of Technology
3 shared publications - Andriy Koval
Vinnytsia National Technical University
3 shared publications - Oksana Borysenko
Kharkiv National University of Internal Affairs
3 shared publications
Latest Publications
- 18 February 2026
- Published by Springer Nature
- p. C1
Correction to: Aspects of Designing Climate Control Systems in Aircraft Hangars
- 18 February 2026
- Published by Springer Nature
- p. C1
Correction to: Aspects of Designing Climate Control Systems in Aircraft Hangars
- Open Access
- 1 December 2025
- Published by Walter de Gruyter GmbH in Transactions on Aerospace Research
- Vol. 2025 (4) , 69-84
Study of the Impact of Prolonged Operation on Residual Deformations in the Airframe Structure of an Aircraft
Purpose: The study aims to quantitatively assess the accumulation of residual deformations in the aircraft airframe during long-term operation, using the An-24 regional aircraft as a representative case. Methods: Levelling data obtained during maintenance were statistically processed using regression and correlation analysis. Polynomial trend models were combined with probability distribution parameters (mean, standard deviation, skewness) to describe geometric deviations of wing control sections across different intervals of flight hours, service life, and landings. Results: The analysis revealed that 25–32% of wing geometry variations are explained by accumulated flight hours, while the remaining deviations result from other operational factors such as hard landings, turbulence, and maintenance practices. Residual deformations manifested as systematic changes in wing incidence and dihedral angles, with probability estimates showing a nonlinear increase in the risk of exceeding permissible limits. Practical implications: The findings improve monitoring of structural geometry through systematic levelling, enhance the reliability of residual life prediction, and support the development of preventive maintenance strategies aimed at ensuring long-term airworthiness and flight safety.
- 1 December 2025
- Published by Walter de Gruyter GmbH in Transactions on Aerospace Research
- Vol. 2025 (4) , 69-84
Open AccessStudy of the Impact of Prolonged Operation on Residual Deformations in the Airframe Structure of an Aircraft
Purpose: The study aims to quantitatively assess the accumulation of residual deformations in the aircraft airframe during long-term operation, using the An-24 regional aircraft as a representative case. Methods: Levelling data obtained during maintenance were statistically processed using regression and correlation analysis. Polynomial trend models were combined with probability distribution parameters (mean, standard deviation, skewness) to describe geometric deviations of wing control sections across different intervals of flight hours, service life, and landings. Results: The analysis revealed that 25–32% of wing geometry variations are explained by accumulated flight hours, while the remaining deviations result from other operational factors such as hard landings, turbulence, and maintenance practices. Residual deformations manifested as systematic changes in wing incidence and dihedral angles, with probability estimates showing a nonlinear increase in the risk of exceeding permissible limits. Practical implications: The findings improve monitoring of structural geometry through systematic levelling, enhance the reliability of residual life prediction, and support the development of preventive maintenance strategies aimed at ensuring long-term airworthiness and flight safety.
- 10 November 2025
- Published by Springer Nature
- p. 100-113
Aspects of Designing Climate Control Systems in Aircraft Hangars
- 10 November 2025
- Published by Springer Nature
- p. 100-113
Aspects of Designing Climate Control Systems in Aircraft Hangars
- Open Access
- 30 October 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(85)) , 63-69
Development of a logistic model for energy transition to renewable energy sources with energy security consideration
The object of the study is the process of energy transition to renewable energy sources (RES) at the enterprise or regional level, aimed at replacing traditional carbon-based sources of electricity. One of the most problematic issues is the insufficient consideration of energy security factors in existing forecasting models, which leads to risks of electricity shortages, especially under conditions of RES intermittency and geopolitical challenges such as military attacks or import dependence. A literature review showed that existing models do not account for dynamic constraints in the implementation of RES, which limits their practical applicability for ensuring power system resilience. In the course of the research, numerical modeling methods were used, in particular an adaptation of the logistic growth equation with an integrated dynamic security factor Sb(t). This makes it possible to fill the gaps in existing models with regard to risk assessment and ensuring system stability. The obtained logistic model predicts the energy transition with RES reaching a 68% share in 24 years for a typical region without compromising security. This is due to the fact that the proposed model has such features as the integration of the coefficient of energy transition rate (CETR) and the dynamic constraint Sb(t), which adapts to changes in demand and reserve. This allows identifying the potential to increase system resilience through the optimal balance of RES and traditional sources during the transition. As a result, it becomes possible to achieve such indicator values as a 68% share of RES, owing to the model’s flexibility to local conditions (variations of ρ, γ, k) and the consideration of worst-case scenarios (CF.min). Compared with similar known models, this provides advantages such as adaptability to regional risks, more accurate forecasting of the transition rate, and reduction of blackout probability. This is particularly relevant for vulnerable power systems, both in Ukraine and worldwide.
- 30 October 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(85)) , 63-69
Open AccessDevelopment of a logistic model for energy transition to renewable energy sources with energy security consideration
The object of the study is the process of energy transition to renewable energy sources (RES) at the enterprise or regional level, aimed at replacing traditional carbon-based sources of electricity. One of the most problematic issues is the insufficient consideration of energy security factors in existing forecasting models, which leads to risks of electricity shortages, especially under conditions of RES intermittency and geopolitical challenges such as military attacks or import dependence. A literature review showed that existing models do not account for dynamic constraints in the implementation of RES, which limits their practical applicability for ensuring power system resilience. In the course of the research, numerical modeling methods were used, in particular an adaptation of the logistic growth equation with an integrated dynamic security factor Sb(t). This makes it possible to fill the gaps in existing models with regard to risk assessment and ensuring system stability. The obtained logistic model predicts the energy transition with RES reaching a 68% share in 24 years for a typical region without compromising security. This is due to the fact that the proposed model has such features as the integration of the coefficient of energy transition rate (CETR) and the dynamic constraint Sb(t), which adapts to changes in demand and reserve. This allows identifying the potential to increase system resilience through the optimal balance of RES and traditional sources during the transition. As a result, it becomes possible to achieve such indicator values as a 68% share of RES, owing to the model’s flexibility to local conditions (variations of ρ, γ, k) and the consideration of worst-case scenarios (CF.min). Compared with similar known models, this provides advantages such as adaptability to regional risks, more accurate forecasting of the transition rate, and reduction of blackout probability. This is particularly relevant for vulnerable power systems, both in Ukraine and worldwide.
- 22 April 2024
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(124),p. 115-121
FEATURES OF THE CONFIGURATION OF CONTROL SYSTEMS FOR PHOTOVOLTAIC INVERTERS
Today, the issue of energy supply and the implementation of ecological systems of electricity generation is relevant, including in the agricultural sector of the economy. This issue is important not only at the state level, but also at the level of the world community. The world's leading countries are actively implementing world-leading technologies for the decarbonization of the energy sector. One of the options for the introduction of alternative and renewable energy sources in the agricultural sector of the economy of the leading countries of the world is the use of photovoltaic systems. The use of modern sources of electrical energy is also inherent in the transport industry. One of the options for such implementation is the use of photovoltaic systems in electrical networks of electric transport and auxiliary systems and infrastructure complexes. Also, attention should be paid to modern global trends in the development of distributed energy systems, which are characterized to a large extent by the use of new progressive developments in power electronics. Also, attention should be paid to modern world trends in the development of distributed energy systems, which are characterized by the use of new progressive developments in power electronics, which are already used in various areas of the economy [1]. Therefore, network converters of electrical energy, which are operated as part of distributed generation systems and as part of complexes based on renewable sources of electrical energy, must meet the parameters of the network, and their control system must be adaptive to stochastic modes of network operation and modes of generation by renewable sources of electric energy. Meanwhile, attention should be paid to the synchronization of three-phase electrical energy converters with the electrical network to which they are connected, which must be ensured by a system for regulating their operation. It should be noted that the structures of control systems of network converters have a significant difference from the structures of control systems of autonomous converters, which directly concerns inverters. This state of affairs is connected with the peculiarity of the functioning of network inverters. Since the specified converters have a modulated sinusoidal voltage using PWM to form in accordance with the parameters of the network to which they are connected. Therefore, the issue of synthesizing a mathematical method that will simplify the development of an automatic control system and also optimize the computing resources of the power converter control controller for photovoltaic systems is relevant. On the basis of analytical data, it is possible to predict with full confidence the post-war development of Ukraine's economy based on the introduction of modern progressive technologies in the field of energy. To date, the sustainable development of the economic and energy component of Ukraine's economy is postponed. Meanwhile, electric power generation systems remain a priority in the context of not only implementation into existing power supply systems, but also relevant in the context of national energy security. The paper considers the use of Park's transformation in the development of control systems for network inverters of photovoltaic systems. The results of the research, which were conducted on inverters whose control systems were built using the proposed mathematical apparatus, confirm high control accuracy and efficiency, without spending a large amount of computing resources of the microcontroller. The proposed approach to building control systems for inverters of photovoltaic systems will allow to increase the efficiency of the operation of photovoltaic systems, which will make them more economically attractive for implementation in the agricultural sector of the economy.
- 22 April 2024
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(124),p. 115-121
FEATURES OF THE CONFIGURATION OF CONTROL SYSTEMS FOR PHOTOVOLTAIC INVERTERS
Today, the issue of energy supply and the implementation of ecological systems of electricity generation is relevant, including in the agricultural sector of the economy. This issue is important not only at the state level, but also at the level of the world community. The world's leading countries are actively implementing world-leading technologies for the decarbonization of the energy sector. One of the options for the introduction of alternative and renewable energy sources in the agricultural sector of the economy of the leading countries of the world is the use of photovoltaic systems. The use of modern sources of electrical energy is also inherent in the transport industry. One of the options for such implementation is the use of photovoltaic systems in electrical networks of electric transport and auxiliary systems and infrastructure complexes. Also, attention should be paid to modern global trends in the development of distributed energy systems, which are characterized to a large extent by the use of new progressive developments in power electronics. Also, attention should be paid to modern world trends in the development of distributed energy systems, which are characterized by the use of new progressive developments in power electronics, which are already used in various areas of the economy [1]. Therefore, network converters of electrical energy, which are operated as part of distributed generation systems and as part of complexes based on renewable sources of electrical energy, must meet the parameters of the network, and their control system must be adaptive to stochastic modes of network operation and modes of generation by renewable sources of electric energy. Meanwhile, attention should be paid to the synchronization of three-phase electrical energy converters with the electrical network to which they are connected, which must be ensured by a system for regulating their operation. It should be noted that the structures of control systems of network converters have a significant difference from the structures of control systems of autonomous converters, which directly concerns inverters. This state of affairs is connected with the peculiarity of the functioning of network inverters. Since the specified converters have a modulated sinusoidal voltage using PWM to form in accordance with the parameters of the network to which they are connected. Therefore, the issue of synthesizing a mathematical method that will simplify the development of an automatic control system and also optimize the computing resources of the power converter control controller for photovoltaic systems is relevant. On the basis of analytical data, it is possible to predict with full confidence the post-war development of Ukraine's economy based on the introduction of modern progressive technologies in the field of energy. To date, the sustainable development of the economic and energy component of Ukraine's economy is postponed. Meanwhile, electric power generation systems remain a priority in the context of not only implementation into existing power supply systems, but also relevant in the context of national energy security. The paper considers the use of Park's transformation in the development of control systems for network inverters of photovoltaic systems. The results of the research, which were conducted on inverters whose control systems were built using the proposed mathematical apparatus, confirm high control accuracy and efficiency, without spending a large amount of computing resources of the microcontroller. The proposed approach to building control systems for inverters of photovoltaic systems will allow to increase the efficiency of the operation of photovoltaic systems, which will make them more economically attractive for implementation in the agricultural sector of the economy.
- 25 August 2023
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 2(121),p. 131-138
ASPECTS OF IMPLEMENTATION OF DISTRIBUTED GENERATION SOURCES IN THE ELECTRICITY SUPPLY SYSTEM OF ENTERPRISES OF THE AGRICULTURAL COMPLEX
Today, the agro-industrial complex of Ukraine determines the socio-economic development of the state, and is an integrated production and economic system, uniting a number of agricultural, industrial, scientific-production and educational sectors aimed at obtaining, transporting, storing, processing and selling agricultural products. However, at the current stage of development of the agro-industrial complex of Ukraine, a significant obstacle to ensuring the appropriate level of competitiveness of enterprises and their products on the foreign market is the high level of energy consumption. A separate problem is the complete dependence on the electric power system, which mainly uses traditional fuel resources and has a number of disadvantages, which creates risks for the effective functioning of a strategically important sector of the state economy and substantiates the relevance of scientific research aimed at improving the optimization of the structure of energy consumption and energy supply, in that including due to the introduction of elements of alternative energy at enterprises of the agro-industrial complex of Ukraine. Thus, by implementing DRG and RES, agro-industrial complex enterprises increase their capacities, which contributes to the attraction of investments and increases their competitiveness. This state of affairs leads to a review of the issue of the active introduction of RES into the electricity supply structures of agricultural enterprises, which is associated with negative effects on the electricity supply systems of electricity consumers. But the analysis of previous studies shows that with a certain combination of disturbances on the same and different harmonic components of energy processes of different types of generators, mutual compensation or mutual reinforcement of one or another harmonic component in loads may occur [1]. In addition, three-phase power transformers with a "star-zero-delta" group of connections are widely used in the power supply systems of agro-industrial complex enterprises to power electric machines and other powerful consumers. In this case, the supply voltage from distribution networks of 6-10 kV is supplied to the transformer windings connected by a delta, and consumers are connected to the low side of 0.4 kV, the windings of which are connected in star with neutral. However, recently, quite often generating power is installed on the low side of the transformer in the power supply system. These can be photovoltaic plants, biogas power plants or diesel generator plants, which began to be installed en masse after the power supply crisis associated with Russian aggression. The paper examines the advantages, problems and prospects of DRG based on renewable energy sources at Ukrainian agro-industrial complex enterprises, which proves its economic feasibility in power supply systems. The proposed approach is that the introduction of DRG based on renewable energy into the power supply system of agro-industrial complex enterprises contributes to reducing the level of energy dependence of these enterprises and is one of the factors of increasing the competitiveness of manufactured products on the domestic and foreign markets due to the reduction of the cost of their production. The introduction of RES into the structures of the centralized power supply system of agricultural enterprises increases the reliability of power supply systems by providing electricity from two independent power sources. In addition, the amount of electricity received from the power supply company is significantly reduced. The use of artificial intelligence technology in the construction of control systems for the combined power supply systems of agro-industrial complex enterprises will increase the quality of electric energy, optimal use of RES and reduce abnormal modes of operation of the electrical complex of agro-industrial complex enterprises as a whole.
- 25 August 2023
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 2(121),p. 131-138
ASPECTS OF IMPLEMENTATION OF DISTRIBUTED GENERATION SOURCES IN THE ELECTRICITY SUPPLY SYSTEM OF ENTERPRISES OF THE AGRICULTURAL COMPLEX
Today, the agro-industrial complex of Ukraine determines the socio-economic development of the state, and is an integrated production and economic system, uniting a number of agricultural, industrial, scientific-production and educational sectors aimed at obtaining, transporting, storing, processing and selling agricultural products. However, at the current stage of development of the agro-industrial complex of Ukraine, a significant obstacle to ensuring the appropriate level of competitiveness of enterprises and their products on the foreign market is the high level of energy consumption. A separate problem is the complete dependence on the electric power system, which mainly uses traditional fuel resources and has a number of disadvantages, which creates risks for the effective functioning of a strategically important sector of the state economy and substantiates the relevance of scientific research aimed at improving the optimization of the structure of energy consumption and energy supply, in that including due to the introduction of elements of alternative energy at enterprises of the agro-industrial complex of Ukraine. Thus, by implementing DRG and RES, agro-industrial complex enterprises increase their capacities, which contributes to the attraction of investments and increases their competitiveness. This state of affairs leads to a review of the issue of the active introduction of RES into the electricity supply structures of agricultural enterprises, which is associated with negative effects on the electricity supply systems of electricity consumers. But the analysis of previous studies shows that with a certain combination of disturbances on the same and different harmonic components of energy processes of different types of generators, mutual compensation or mutual reinforcement of one or another harmonic component in loads may occur [1]. In addition, three-phase power transformers with a "star-zero-delta" group of connections are widely used in the power supply systems of agro-industrial complex enterprises to power electric machines and other powerful consumers. In this case, the supply voltage from distribution networks of 6-10 kV is supplied to the transformer windings connected by a delta, and consumers are connected to the low side of 0.4 kV, the windings of which are connected in star with neutral. However, recently, quite often generating power is installed on the low side of the transformer in the power supply system. These can be photovoltaic plants, biogas power plants or diesel generator plants, which began to be installed en masse after the power supply crisis associated with Russian aggression. The paper examines the advantages, problems and prospects of DRG based on renewable energy sources at Ukrainian agro-industrial complex enterprises, which proves its economic feasibility in power supply systems. The proposed approach is that the introduction of DRG based on renewable energy into the power supply system of agro-industrial complex enterprises contributes to reducing the level of energy dependence of these enterprises and is one of the factors of increasing the competitiveness of manufactured products on the domestic and foreign markets due to the reduction of the cost of their production. The introduction of RES into the structures of the centralized power supply system of agricultural enterprises increases the reliability of power supply systems by providing electricity from two independent power sources. In addition, the amount of electricity received from the power supply company is significantly reduced. The use of artificial intelligence technology in the construction of control systems for the combined power supply systems of agro-industrial complex enterprises will increase the quality of electric energy, optimal use of RES and reduce abnormal modes of operation of the electrical complex of agro-industrial complex enterprises as a whole.
- 1 July 2023
- Published by Khazar University Press in Khazar Journal of Humanities and Social Sciences
- Vol. 26 (3) , 48-64
The Problems of Ensuring the Efficiency and Competitiveness of the Ukrainian Transport Industry to Meet the Modern Challenges and Threats
In Ukraine, the challenges and threats to the efficient functioning of the transportation industry are intensifying during the war and infrastructure destruction. The need for emergency repairs of the ruined infrastructure hinders the reform of the Ukrainian transportation industry. Furthermore, developing an integrated EU-oriented multimodal transportation system within the "Eastern Partnership" regional network becomes more complicated. This article aims to identify the problems of efficiency and competitiveness of the Ukrainian transportation industry in the context of integration into the Trans-European Transport Network (TEN-T) and the construction of a multimodal transportation system. The research employs a systemic analysis methodology to assess the structural indicators of Ukraine's transportation system development. The structure of Ukrainian freight transportation by mode is compared with that in EU countries to reflect differences in a modal split in the context of Ukraine's accession to TEN-T. The results demonstrate a range of problems related to the competitiveness of the Ukrainian transportation industry, which act as barriers to its integration with TEN-T. Institutional, political, and managerial-administrative problems are identified as the leading issues associated with inefficient data collection and processing, management and control functions, decision-making, communication, and interaction among governing bodies. A separate group of issues in Ukraine's transportation industry is linked to the material-technical condition of various types of transportation infrastructure, which affects service quality. Consequently, other problems arise, including the low level of development of intermodal and multimodal transport, transportation logistics, decreased efficiency in capacity utilization, insufficient level of competition in the market for transportation services, and non-compliance with European requirements for access to the transportation services market.
- 1 July 2023
- Published by Khazar University Press in Khazar Journal of Humanities and Social Sciences
- Vol. 26 (3) , 48-64
The Problems of Ensuring the Efficiency and Competitiveness of the Ukrainian Transport Industry to Meet the Modern Challenges and Threats
In Ukraine, the challenges and threats to the efficient functioning of the transportation industry are intensifying during the war and infrastructure destruction. The need for emergency repairs of the ruined infrastructure hinders the reform of the Ukrainian transportation industry. Furthermore, developing an integrated EU-oriented multimodal transportation system within the "Eastern Partnership" regional network becomes more complicated. This article aims to identify the problems of efficiency and competitiveness of the Ukrainian transportation industry in the context of integration into the Trans-European Transport Network (TEN-T) and the construction of a multimodal transportation system. The research employs a systemic analysis methodology to assess the structural indicators of Ukraine's transportation system development. The structure of Ukrainian freight transportation by mode is compared with that in EU countries to reflect differences in a modal split in the context of Ukraine's accession to TEN-T. The results demonstrate a range of problems related to the competitiveness of the Ukrainian transportation industry, which act as barriers to its integration with TEN-T. Institutional, political, and managerial-administrative problems are identified as the leading issues associated with inefficient data collection and processing, management and control functions, decision-making, communication, and interaction among governing bodies. A separate group of issues in Ukraine's transportation industry is linked to the material-technical condition of various types of transportation infrastructure, which affects service quality. Consequently, other problems arise, including the low level of development of intermodal and multimodal transport, transportation logistics, decreased efficiency in capacity utilization, insufficient level of competition in the market for transportation services, and non-compliance with European requirements for access to the transportation services market.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6)
APPROACH TO THE IMPROVEMENT OF THE CONTROL SYSTEM OF THE ELECTRIC POWER PLANT OF THE AIRCRAFT
The paper proposes an approach to improving the adaptive system of aircraft with an electric propulsion system. Modern aircraft are inextricably linked with electronics that ensure the functioning of the entire air transport system. Modern aircraft avionics is a complex of hardware and software that is part of the automatic control system of the aircraft and functionally combines the glider with the drive of the executive body. One of the main functions of modern avionics is the automation of aircraft control processes, which aims to ensure the proper execution of a safe flight with the smallest number of crew members. this fact encourages the continuous improvement of the existing on-board avionics complexes of aircraft. Among other things, the adaptive control system should determine the dynamic characteristics of the controlled aircraft during the flight, the assessment of the state of the functional systems of the aircraft and the formation of control signals. An approach to the construction of an aircraft control system is proposed, which involves a double determination of the characteristics of the object under study. The structure of the control system of an aircraft with an electric power plant is proposed. Its construction was influenced by the operating features of the aircraft’s electric power plant, the approach to the dual determination of the aircraft’s characteristics, and the principle of dual control of the aircraft’s flight parameters. The paper proposes an approach to improving the adaptive system of aircraft with an electric propulsion system. There are the following factors: 1) height, accuracy and reliability of sensors of all parameters, regardless of operating conditions; 2) a simple and at the same time reliable and functional interface; 3) timely detection of deviations in the operation of aircraft systems during its operation and transmission of relevant information to the crew and the control system; 4) operational determination of the dynamic characteristics of the aircraft during flight and adaptive optimization of controlled signals taking into account the purpose of control and the specified optimization criteria.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6)
APPROACH TO THE IMPROVEMENT OF THE CONTROL SYSTEM OF THE ELECTRIC POWER PLANT OF THE AIRCRAFT
The paper proposes an approach to improving the adaptive system of aircraft with an electric propulsion system. Modern aircraft are inextricably linked with electronics that ensure the functioning of the entire air transport system. Modern aircraft avionics is a complex of hardware and software that is part of the automatic control system of the aircraft and functionally combines the glider with the drive of the executive body. One of the main functions of modern avionics is the automation of aircraft control processes, which aims to ensure the proper execution of a safe flight with the smallest number of crew members. this fact encourages the continuous improvement of the existing on-board avionics complexes of aircraft. Among other things, the adaptive control system should determine the dynamic characteristics of the controlled aircraft during the flight, the assessment of the state of the functional systems of the aircraft and the formation of control signals. An approach to the construction of an aircraft control system is proposed, which involves a double determination of the characteristics of the object under study. The structure of the control system of an aircraft with an electric power plant is proposed. Its construction was influenced by the operating features of the aircraft’s electric power plant, the approach to the dual determination of the aircraft’s characteristics, and the principle of dual control of the aircraft’s flight parameters. The paper proposes an approach to improving the adaptive system of aircraft with an electric propulsion system. There are the following factors: 1) height, accuracy and reliability of sensors of all parameters, regardless of operating conditions; 2) a simple and at the same time reliable and functional interface; 3) timely detection of deviations in the operation of aircraft systems during its operation and transmission of relevant information to the crew and the control system; 4) operational determination of the dynamic characteristics of the aircraft during flight and adaptive optimization of controlled signals taking into account the purpose of control and the specified optimization criteria.
- 2 December 2022
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 3(122),p. 116-123
PRINCIPLES OF APPLICATION OF ALTERNATIVE ENERGY SOURCES IN REGIONS WITH LIMITED DRINKING WATER RESOURCES
The unsatisfactory ecological state of water resources indicates, first of all, the problems of pollution and depletion of water resources and their relevance today. The lack of an optimal principle of management and responsibility for the state o...
- 2 December 2022
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 3(122),p. 116-123
PRINCIPLES OF APPLICATION OF ALTERNATIVE ENERGY SOURCES IN REGIONS WITH LIMITED DRINKING WATER RESOURCES
The unsatisfactory ecological state of water resources indicates, first of all, the problems of pollution and depletion of water resources and their relevance today. The lack of an optimal principle of management and responsibility for the state o...
- 30 August 2022
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 2(117),p. 146-152
PECULIARITIES OF DETERMINATION OF RECONSTRUCTION POTENTIAL OF ENERGY SOURCE IN THE CONDITIONS OF AVIATION ENTERPRISES
In the context of the world economy, air transport today, among other characteristics, is characterized by high technological complexity of vehicles, increasing the safety of air transport, strengthening measures to protect aviation from acts of unlawful interference and development of modern multimodal transport technologies and infrastructure for various modes of transport. Due to the global trend, unmanned aerial vehicles have become widespread in various areas and sectors of the world economy. Meanwhile, the issue of energy security as a component of aviation security at airfields and specialized enterprises in their operation, storage and maintenance remains unresolved. The problem of this work is the synthesis of the method of determining the potential of dispersed energy sources in aviation enterprises. Combining the parallel operation of dispersed generation and network will give a synergistic effect - the emergence of new properties that were not in the components, which is manifested, in particular, in increasing factors influencing energy performance, irregularity of the total load schedule of integrated systems, reducing its unevenness in daily, weekly and seasonal sections, reducing the dependence of the frequency of electric current on power balance fluctuations. In previous studies, the authors justify the positive effect of the introduction of sources of dispersed generation in industrial enterprises, namely modularity, reliability, local governance, reducing the negative impact on the environment and short start-up period. Given the complexity of the technological process and the specifics of the operation of electrical equipment of aviation enterprises, an urgent scientific and practical task is to develop a method for determining the potential of dispersed energy sources in these enterprises. To determine the potential of sources of dispersed generation in aviation enterprises, it is necessary to have as complete and clear data on electricity supply and power consumption of electrical equipment of these enterprises during the day, as well as data on electricity consumption in the power grid, operation and load consumption. At aviation enterprises, the introduction of dispersed generation based on renewable energy sources into the general structure of power supply systems is relevant and possible. The proposed method of determining the potential of dispersed energy sources in the conditions of aviation enterprises will allow to effectively implement dispersed generation in the power supply structure of aviation enterprises.
- 30 August 2022
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 2(117),p. 146-152
PECULIARITIES OF DETERMINATION OF RECONSTRUCTION POTENTIAL OF ENERGY SOURCE IN THE CONDITIONS OF AVIATION ENTERPRISES
In the context of the world economy, air transport today, among other characteristics, is characterized by high technological complexity of vehicles, increasing the safety of air transport, strengthening measures to protect aviation from acts of unlawful interference and development of modern multimodal transport technologies and infrastructure for various modes of transport. Due to the global trend, unmanned aerial vehicles have become widespread in various areas and sectors of the world economy. Meanwhile, the issue of energy security as a component of aviation security at airfields and specialized enterprises in their operation, storage and maintenance remains unresolved. The problem of this work is the synthesis of the method of determining the potential of dispersed energy sources in aviation enterprises. Combining the parallel operation of dispersed generation and network will give a synergistic effect - the emergence of new properties that were not in the components, which is manifested, in particular, in increasing factors influencing energy performance, irregularity of the total load schedule of integrated systems, reducing its unevenness in daily, weekly and seasonal sections, reducing the dependence of the frequency of electric current on power balance fluctuations. In previous studies, the authors justify the positive effect of the introduction of sources of dispersed generation in industrial enterprises, namely modularity, reliability, local governance, reducing the negative impact on the environment and short start-up period. Given the complexity of the technological process and the specifics of the operation of electrical equipment of aviation enterprises, an urgent scientific and practical task is to develop a method for determining the potential of dispersed energy sources in these enterprises. To determine the potential of sources of dispersed generation in aviation enterprises, it is necessary to have as complete and clear data on electricity supply and power consumption of electrical equipment of these enterprises during the day, as well as data on electricity consumption in the power grid, operation and load consumption. At aviation enterprises, the introduction of dispersed generation based on renewable energy sources into the general structure of power supply systems is relevant and possible. The proposed method of determining the potential of dispersed energy sources in the conditions of aviation enterprises will allow to effectively implement dispersed generation in the power supply structure of aviation enterprises.