Shenlong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shenlong Wang has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
Guyue Jiao
5 shared publicationsCheng Wu
School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai, People’s Republic of China
3 shared publicationsHaihua Wang
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Vehicle Engineering, Hunan University, Changsha, China
3 shared publicationsHuijie Yu
School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai, China
3 shared publicationsXiaohong Ding
School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai, China
3 shared publicationsKaixin Han
School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai, P. R. China
2 shared publications
Latest Publications
- 4 June 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Data-driven modeling and intelligent control of magnetorheological dampers for whole-body vibration isolation and ride-comfort evaluation
Magnetorheological (MR) dampers have received considerable attention in recent years. This interest stems from their unique characteristics, most notably their fail-safe damping modulation capability, rapid response to control inputs, and adaptability to varying operating conditions. The development of a simple yet accurate phenomenological model to characterize nonlinear hysteretic response of MR dampers is of paramount importance for designing effective control strategies. In this study a non-parametric model based on the Adaptive Neuro-Fuzzy Inference System (ANFIS) is proposed and its performance is compared with parametric models such as the double hyperbolic tangent (DHT) model. The proposed models can be effectively used to formulate inverse models, thus enabling effective tracking control of target damping force required for controller design. A coupled quarter vehicle-seat-driver model integrated with the proposed ANFIS model of the MR damper subjected to stochastic C-class road roughness input is further formulated to illustrate merits of the proposed model and the response characteristics of the coupled model are presented to discuss system-level vibration responses. Considering two fuzzy control strategies, namely, force-controlled and current-controlled, to evaluate the close-loop performance of the coupled system. The transmission of road-induced vehicle vibration to the occupant is subsequently analyzed considering three system configurations: passive, force-controlled semi-active, and current-controlled semi-active. Finally, vibration isolation performance and ride comfort are assessed on the basis of W k -weighted RMS acceleration (RMS Wk ) response at the occupant-seat interface in accordance with ISO-2631-1. The whole-body vibration exposure and associated potential health risks are also evaluated by computing vibration dose value (VDV) and daily exposure A (8) in accordance with ISO 2631-1. Results demonstrated superior performance of the force-controlled semi-active control strategy achieves superior vibration attenuation compared to both the passive and current-controlled configurations. The proposed force-controlled strategy demonstrated enhanced comfort performance and notable reduction in cumulative vibration exposure dosage.
- 4 June 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Data-driven modeling and intelligent control of magnetorheological dampers for whole-body vibration isolation and ride-comfort evaluation
Magnetorheological (MR) dampers have received considerable attention in recent years. This interest stems from their unique characteristics, most notably their fail-safe damping modulation capability, rapid response to control inputs, and adaptability to varying operating conditions. The development of a simple yet accurate phenomenological model to characterize nonlinear hysteretic response of MR dampers is of paramount importance for designing effective control strategies. In this study a non-parametric model based on the Adaptive Neuro-Fuzzy Inference System (ANFIS) is proposed and its performance is compared with parametric models such as the double hyperbolic tangent (DHT) model. The proposed models can be effectively used to formulate inverse models, thus enabling effective tracking control of target damping force required for controller design. A coupled quarter vehicle-seat-driver model integrated with the proposed ANFIS model of the MR damper subjected to stochastic C-class road roughness input is further formulated to illustrate merits of the proposed model and the response characteristics of the coupled model are presented to discuss system-level vibration responses. Considering two fuzzy control strategies, namely, force-controlled and current-controlled, to evaluate the close-loop performance of the coupled system. The transmission of road-induced vehicle vibration to the occupant is subsequently analyzed considering three system configurations: passive, force-controlled semi-active, and current-controlled semi-active. Finally, vibration isolation performance and ride comfort are assessed on the basis of W k -weighted RMS acceleration (RMS Wk ) response at the occupant-seat interface in accordance with ISO-2631-1. The whole-body vibration exposure and associated potential health risks are also evaluated by computing vibration dose value (VDV) and daily exposure A (8) in accordance with ISO 2631-1. Results demonstrated superior performance of the force-controlled semi-active control strategy achieves superior vibration attenuation compared to both the passive and current-controlled configurations. The proposed force-controlled strategy demonstrated enhanced comfort performance and notable reduction in cumulative vibration exposure dosage.
- Open Access
- 19 May 2026
- Published by Elsevier in International Journal of Non-Linear Mechanics
- Vol. 188
Quasi-zero-stiffness vibration isolation: A comprehensive review of design principles and engineering applications
- 19 May 2026
- Published by Elsevier in International Journal of Non-Linear Mechanics
- Vol. 188
Open AccessQuasi-zero-stiffness vibration isolation: A comprehensive review of design principles and engineering applications
- 31 March 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 318
Tri-axial low-frequency vibration isolator with decoupled dynamics
- 31 March 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 318
Tri-axial low-frequency vibration isolator with decoupled dynamics
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 23 (15455955) , 6064-6075
Design, Modeling, and Experiment of a Rigid–Flexible Coupling Robotic Manta Ray With Fast Motion Performance
Underwater bioinspired robots’ pursuit of high speed locomotion is fundamentally limited by a well-recognized physical trade-off. Increasing the flapping frequency to achieve higher speeds induces a quadratic increase in hydrodynamic resistance, which severely attenuates the oscillation amplitude of the fin and consequently limits the maximum thrust that can be generated. To address this core limitation, this paper presents the design, modeling, and experimental validation of a magnetically actuated rigid-flexible coupling robotic manta ray (MARRM). The robot’s design strategy is to address both aspects of this tradeoff simultaneously: coil-magnet (CM) pairs enable high-frequency actuation, while a biomimetic pectoral fin structure, coupling a rigid leading edge with a flexible membrane, is designed to passively maintain large undulatory amplitudes. We develop a comprehensive dynamic model to analyze and optimize this system. The model integrates an analytical magnetic torque calculation, an underactuated joint dynamics formulation, and a boundary-constrained mechanical wave function that captures the compound deformation of the fin for hydrodynamic force prediction. Simulations and comparative experiments validate the model and the design’s effectiveness. Fabricated based on this design, an untethered prototype achieves a linear swimming speed of 322.4 mm/s (3.27 body lengths per second), a turning speed of 290 °/s, and a minimal turning radius of 23.9 mm. This work demonstrates an integrated approach to mitigating the frequency-amplitude trade-off in oscillatory propulsion and provides a modeling framework applicable to the design of rigid-flexible underwater robots.
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 23 (15455955) , 6064-6075
Design, Modeling, and Experiment of a Rigid–Flexible Coupling Robotic Manta Ray With Fast Motion Performance
Underwater bioinspired robots’ pursuit of high speed locomotion is fundamentally limited by a well-recognized physical trade-off. Increasing the flapping frequency to achieve higher speeds induces a quadratic increase in hydrodynamic resistance, which severely attenuates the oscillation amplitude of the fin and consequently limits the maximum thrust that can be generated. To address this core limitation, this paper presents the design, modeling, and experimental validation of a magnetically actuated rigid-flexible coupling robotic manta ray (MARRM). The robot’s design strategy is to address both aspects of this tradeoff simultaneously: coil-magnet (CM) pairs enable high-frequency actuation, while a biomimetic pectoral fin structure, coupling a rigid leading edge with a flexible membrane, is designed to passively maintain large undulatory amplitudes. We develop a comprehensive dynamic model to analyze and optimize this system. The model integrates an analytical magnetic torque calculation, an underactuated joint dynamics formulation, and a boundary-constrained mechanical wave function that captures the compound deformation of the fin for hydrodynamic force prediction. Simulations and comparative experiments validate the model and the design’s effectiveness. Fabricated based on this design, an untethered prototype achieves a linear swimming speed of 322.4 mm/s (3.27 body lengths per second), a turning speed of 290 °/s, and a minimal turning radius of 23.9 mm. This work demonstrates an integrated approach to mitigating the frequency-amplitude trade-off in oscillatory propulsion and provides a modeling framework applicable to the design of rigid-flexible underwater robots.
- 1 January 2026
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 62 (5) , 215-229
Design and Dynamic Modeling of a Multi-DOF Soft Robotic Fish with a Single Magnetic Actuator
- 1 January 2026
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 62 (5) , 215-229
Design and Dynamic Modeling of a Multi-DOF Soft Robotic Fish with a Single Magnetic Actuator
- 1 January 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (1) , 015230
Biomimetic soft robotics: reconfigurable pneumatic logic circuits for snake-inspired locomotion
While conventional soft robots employ electronic control systems to achieve intelligent behaviors, they encounter fundamental constraints, particularly regarding inherent safety in physical human-robot interaction (HRI) and environmental adaptability. To address these challenges, we develop a snake-inspired soft robot as a platform to demonstrate the capabilities of fluidic logic circuits for controlling complex locomotion without electronics, utilizing programmable flexible valves capable of autonomous Boolean logic operations (NOT, NAND, NOR). Experimental characterization reveals that the 50g robot achieves directed locomotion at 22 mm s −1 and steering motion at 0.95°/s when operating at 0.25-1 Hz, with fluid-mediated gait transitions triggered by environmental contact. This mechanically intelligent approach offers a potential pathway toward systems with inherent safety benefits, suitable for future applications such as medical assistance and industrial collaboration, eliminating the electronic dependence characteristic of traditional soft robotic systems.
- 1 January 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (1) , 015230
Biomimetic soft robotics: reconfigurable pneumatic logic circuits for snake-inspired locomotion
While conventional soft robots employ electronic control systems to achieve intelligent behaviors, they encounter fundamental constraints, particularly regarding inherent safety in physical human-robot interaction (HRI) and environmental adaptability. To address these challenges, we develop a snake-inspired soft robot as a platform to demonstrate the capabilities of fluidic logic circuits for controlling complex locomotion without electronics, utilizing programmable flexible valves capable of autonomous Boolean logic operations (NOT, NAND, NOR). Experimental characterization reveals that the 50g robot achieves directed locomotion at 22 mm s −1 and steering motion at 0.95°/s when operating at 0.25-1 Hz, with fluid-mediated gait transitions triggered by environmental contact. This mechanically intelligent approach offers a potential pathway toward systems with inherent safety benefits, suitable for future applications such as medical assistance and industrial collaboration, eliminating the electronic dependence characteristic of traditional soft robotic systems.
- 13 August 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 10 (105) , eadt8054
Plasticized electrohydraulic robot autopilots in the deep sea
Soft robots, with their compliant bodies, minimal environmental disturbance, and ability to withstand ambient pressures, offer promising solutions for deep-sea exploration. However, a common challenge of stiffening in soft materials impairs their effective actuation in harsh conditions. In this work, we integrated a liquid dielectric plasticizer within an electrohydraulic soft robot, serving dual critical functions as a softening agent to maintain the softness of the polymer shell and an electrohydraulic fluid for efficient actuation. In addition, by using the surrounding seawater as alternating electrodes, we prevented charge retention in dielectric layers, enabling sustained actuation performance. Field tests at depths of ~1360, 3176, and ~4071 meters confirmed the robot’s ability to sense the environment, navigate complex trajectories, and withstand unsteady disturbances. Our work offers a generalized and straightforward framework for developing soft materials tailored for deep-sea applications, paving the way for soft robots to execute real-world missions.
- 13 August 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 10 (105) , eadt8054
Plasticized electrohydraulic robot autopilots in the deep sea
Soft robots, with their compliant bodies, minimal environmental disturbance, and ability to withstand ambient pressures, offer promising solutions for deep-sea exploration. However, a common challenge of stiffening in soft materials impairs their effective actuation in harsh conditions. In this work, we integrated a liquid dielectric plasticizer within an electrohydraulic soft robot, serving dual critical functions as a softening agent to maintain the softness of the polymer shell and an electrohydraulic fluid for efficient actuation. In addition, by using the surrounding seawater as alternating electrodes, we prevented charge retention in dielectric layers, enabling sustained actuation performance. Field tests at depths of ~1360, 3176, and ~4071 meters confirmed the robot’s ability to sense the environment, navigate complex trajectories, and withstand unsteady disturbances. Our work offers a generalized and straightforward framework for developing soft materials tailored for deep-sea applications, paving the way for soft robots to execute real-world missions.
- 3 July 2025
- Published by Springer Nature in Journal of Bionic Engineering
- Vol. 22 (4) , 1717-1730
Design and Application of a Bionic Origami Mechanism Based on Adjustable Bistability
- 3 July 2025
- Published by Springer Nature in Journal of Bionic Engineering
- Vol. 22 (4) , 1717-1730
Design and Application of a Bionic Origami Mechanism Based on Adjustable Bistability
- Top Cited Papers
- 17 April 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 295
Miura-origami inspired quasi-zero stiffness low-frequency vibration isolator
- 17 April 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 295
Top Cited PapersMiura-origami inspired quasi-zero stiffness low-frequency vibration isolator
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (13) , 302-314
Design, Modeling and Experiment on Soft Robotic Fish Driven by Electrostatic Hydraulic Actuators
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (13) , 302-314
Design, Modeling and Experiment on Soft Robotic Fish Driven by Electrostatic Hydraulic Actuators