Konrad Woronowicz
Research Subjects
Konrad Woronowicz has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Alireza Safaee
Bombardier Transportation, Kingston, ON, Canada
15 shared publications Tim Dickson
Research and Development, Systems Division, Bombardier Transportation Inc., Kingston, Ontario Canada
7 shared publicationsAlireza Bakhshai
Queen's University, Kingston, Ontario, Canada
3 shared publicationsPraveen Jain
Queen's University, Kingston, Ontario, Canada
3 shared publications- Ryszard Palka
Department of Power Systems and Electrical Drives, West Pomeranian University of Technology, Szczecin, Poland
3 shared publications Behnam Koushki
Department of Electrical and Computer Engineering, Queen's University, Kingston, Ontario Canada
2 shared publications
Latest Publications
- Open Access
- 19 November 2018
- Published by ECO-Vector LLC in Transportation systems and technology
- Vol. 4 (3 suppl. 1) , 105-114
Current mode performance of a traction linear induction motor driven from the voltage converter
Background: The paper deals with the modelling of a traction Linear Induction Motor (LIM) for public transportation. Typical problems arising from the electromagnetic finite element model development are described. The end effect causes asymmetry of phase impedances of the LIM. Because of that, if the LIM is supplied from the voltage inverter, which is usually the case, the phase currents become asymmetric. This causes performance calculation discrepancies in models that assume phase current symmetry. Aim: The aim of the paper is to develop a method for calculating the imbalanced three-phase LIM currents to precisely predict the LIM performance. Methods: Here, a method is developed to calculate the LIM phase current asymmetry by means of a self-developed electromagnetic finite element program – ELMAG, capable of adapting mesh generation based on Reynolds, Péclet and skin-depth numbers. Results: The calculated asymmetric currents are used in a real size traction LIM calculation in COMSOL, to derive the performance characteristics for comparison with the results achieved when supplying the LLIM with the symmetric three phase current. Conclusion: These results show that the natural asymmetry of the currents is an important factor that must be considered in appropriately calculating the LIM performance.
- 19 November 2018
- Published by ECO-Vector LLC in Transportation systems and technology
- Vol. 4 (3 suppl. 1) , 105-114
Open AccessCurrent mode performance of a traction linear induction motor driven from the voltage converter
Background: The paper deals with the modelling of a traction Linear Induction Motor (LIM) for public transportation. Typical problems arising from the electromagnetic finite element model development are described. The end effect causes asymmetry of phase impedances of the LIM. Because of that, if the LIM is supplied from the voltage inverter, which is usually the case, the phase currents become asymmetric. This causes performance calculation discrepancies in models that assume phase current symmetry. Aim: The aim of the paper is to develop a method for calculating the imbalanced three-phase LIM currents to precisely predict the LIM performance. Methods: Here, a method is developed to calculate the LIM phase current asymmetry by means of a self-developed electromagnetic finite element program – ELMAG, capable of adapting mesh generation based on Reynolds, Péclet and skin-depth numbers. Results: The calculated asymmetric currents are used in a real size traction LIM calculation in COMSOL, to derive the performance characteristics for comparison with the results achieved when supplying the LLIM with the symmetric three phase current. Conclusion: These results show that the natural asymmetry of the currents is an important factor that must be considered in appropriately calculating the LIM performance.
- 3 July 2017
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 36 (4) , 980-990
2-D quasi-static solution of a coil in relative motion to a conducting plate
Purpose: The aim of this paper is to present a method for calculating the electromagnetic fields, forces and current density distribution using Fourier series for a two-dimensional quasi steady state model consisting of a conducting uniform plate moving relative to an arbitrary current source with time harmonic excitation. Design/methodology/approach: The presented solution is valid for an arbitrary source. A specific source is chosen consisting of a single coil made up of two-time harmonic current filaments. The solutions are derived and presented in a form that allows its expansion to include an arbitrary number of spatially shifted coils conducting arbitrary harmonic currents. Findings: The analytical solution is compared to simulations produced using commercial finite element analysis software, ANSYS Maxwell2D and COMSOL, and is found to be in good agreement. The analytical solution provides a direct method to analyze the spatial harmonics in the system and can be computationally significantly faster especially at high relative speeds between the primary source and conducting plate. Originality/value: The presented Fourier series solution is applied to simple 2-D model of a single coil with AC current excitation moving relative to a conducting plate. An analytical solution and analysis of this system has not been presented before, to the authors’ knowledge, using Fourier series or any other method.
- 3 July 2017
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 36 (4) , 980-990
2-D quasi-static solution of a coil in relative motion to a conducting plate
Purpose: The aim of this paper is to present a method for calculating the electromagnetic fields, forces and current density distribution using Fourier series for a two-dimensional quasi steady state model consisting of a conducting uniform plate moving relative to an arbitrary current source with time harmonic excitation. Design/methodology/approach: The presented solution is valid for an arbitrary source. A specific source is chosen consisting of a single coil made up of two-time harmonic current filaments. The solutions are derived and presented in a form that allows its expansion to include an arbitrary number of spatially shifted coils conducting arbitrary harmonic currents. Findings: The analytical solution is compared to simulations produced using commercial finite element analysis software, ANSYS Maxwell2D and COMSOL, and is found to be in good agreement. The analytical solution provides a direct method to analyze the spatial harmonics in the system and can be computationally significantly faster especially at high relative speeds between the primary source and conducting plate. Originality/value: The presented Fourier series solution is applied to simple 2-D model of a single coil with AC current excitation moving relative to a conducting plate. An analytical solution and analysis of this system has not been presented before, to the authors’ knowledge, using Fourier series or any other method.
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32 (7) , 4981-5003
Time-Domain Analysis of Voltage-Driven Series–Series Compensated Inductive Power Transfer Topology
This paper presents, initially, a systematic derivation of extended first harmonic approximation (FHA) analysis and, later, a comprehensive time-domain (T-D) analysis to study series-series compensated inductive power transfer systems with a diode bridge rectifier. Further, the paper shows that both FHA and T-D methods predict four mutually-exclusive and collectively-exhaustive modes of operation. Explicit criteria for each operation mode and formulae for mode boundaries are derived and it is concluded that FHA can explain three of four modes. The proposed T-D analysis is capable of describing the quantitative behavior of the system in all four operation modes with closed-form equations for all the mode boundaries. This analysis provides an objective basis to assess the accuracy of FHA predictions under the entire operating conditions. Quantitative comparison of key variables revealed that the FHA results can be unacceptably inaccurate for certain operating points. It is shown that the T-D approach provides a comprehensive design base for series-series compensated inductive power transfer without a need to know the load value. The T-D predictions are validated by experiment. A mathematical design calculator tool is also provided to the reader to visualize the mode boundaries, all the waveforms and the numerical results from both methods.
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32 (7) , 4981-5003
Time-Domain Analysis of Voltage-Driven Series–Series Compensated Inductive Power Transfer Topology
This paper presents, initially, a systematic derivation of extended first harmonic approximation (FHA) analysis and, later, a comprehensive time-domain (T-D) analysis to study series-series compensated inductive power transfer systems with a diode bridge rectifier. Further, the paper shows that both FHA and T-D methods predict four mutually-exclusive and collectively-exhaustive modes of operation. Explicit criteria for each operation mode and formulae for mode boundaries are derived and it is concluded that FHA can explain three of four modes. The proposed T-D analysis is capable of describing the quantitative behavior of the system in all four operation modes with closed-form equations for all the mode boundaries. This analysis provides an objective basis to assess the accuracy of FHA predictions under the entire operating conditions. Quantitative comparison of key variables revealed that the FHA results can be unacceptably inaccurate for certain operating points. It is shown that the T-D approach provides a comprehensive design base for series-series compensated inductive power transfer without a need to know the load value. The T-D predictions are validated by experiment. A mathematical design calculator tool is also provided to the reader to visualize the mode boundaries, all the waveforms and the numerical results from both methods.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
2-D quasi-static fourier series solution for a single coil of a linear induction motor
A method is presented for calculating the electromagnetic fields, forces and Ohmic losses for the basic building block of linear induction motors (LIM). The analytic solution is compared to commercial Finite Element Analysis (FEA) results. Advantages of analytical calculations over FEA simulations of LIMs for medium to high speeds are explained.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
2-D quasi-static fourier series solution for a single coil of a linear induction motor
A method is presented for calculating the electromagnetic fields, forces and Ohmic losses for the basic building block of linear induction motors (LIM). The analytic solution is compared to commercial Finite Element Analysis (FEA) results. Advantages of analytical calculations over FEA simulations of LIMs for medium to high speeds are explained.
- 12 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 2 (4) , 493-503
Hybrid Fuel Cell/Battery Rail Car: A Feasibility Study
This paper introduces a novel engineering feasibility study for developing a future hybrid metro system, for the first time in Canada, that is of extremely low cost and independent of the utility grid. This system will eliminate the need of the rail cars to rely on the track substations and consequently the utility grid. This paper is based on the load profiles provided by Bombardier Transportation for its advanced rapid transit train running in Vancouver, BC, Canada. Simulation was performed for propulsion with and without auxiliary power with the assumption of an average power of 40 kW. To size the system for the worst case scenario, the regeneration power will not be taken into account in case the propulsion cuts off during regenerative braking. The subsystem modules described in the model are listed for reference purposes. The hydrogen consumption and storage are also calculated for each case with the tank options listed for each energy storage option. Furthermore, an analysis platform is being provided for a sound design of a hybrid metro car for the first time in North America. This systematic modular approach can be easily applied to any transit system worldwide. A successful design for a fuel cell hybrid train is given, which is fully independent on the electricity from the grid. The elimination of the wayside substations system, which is 90% of the cost of the transit system, presents huge initial and running cost savings and makes the rail car ridership very inexpensive.
- 12 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 2 (4) , 493-503
Hybrid Fuel Cell/Battery Rail Car: A Feasibility Study
This paper introduces a novel engineering feasibility study for developing a future hybrid metro system, for the first time in Canada, that is of extremely low cost and independent of the utility grid. This system will eliminate the need of the rail cars to rely on the track substations and consequently the utility grid. This paper is based on the load profiles provided by Bombardier Transportation for its advanced rapid transit train running in Vancouver, BC, Canada. Simulation was performed for propulsion with and without auxiliary power with the assumption of an average power of 40 kW. To size the system for the worst case scenario, the regeneration power will not be taken into account in case the propulsion cuts off during regenerative braking. The subsystem modules described in the model are listed for reference purposes. The hydrogen consumption and storage are also calculated for each case with the tank options listed for each energy storage option. Furthermore, an analysis platform is being provided for a sound design of a hybrid metro car for the first time in North America. This systematic modular approach can be easily applied to any transit system worldwide. A successful design for a fuel cell hybrid train is given, which is fully independent on the electricity from the grid. The elimination of the wayside substations system, which is 90% of the cost of the transit system, presents huge initial and running cost savings and makes the rail car ridership very inexpensive.
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 375-380
Reactive power compensation in three phase high output inductive power transfer
Inductive power transfer becomes increasingly more popular as a method for contact less charging of high power loads. Enabled by the rapid progress in power electronics components and controls, the power transfer solutions cross the previously unattainable boundaries of power levels and cost limits. Because of the high frequencies necessary for voltage induction in the secondary parts of the transformers and because of a rather low magnetic coupling, the system would have to constantly supply high levels of the reactive power, generating very high losses and limiting the available output power. Various tuning techniques have developed to tune-out the reactive power. In this paper a systematic approach to tuning of a high power three phase coupled transformer is presented and arithmetical calculations backed by simulation utilizing its values from the electromagnetic FEA analysis. The approach is based on the fundamental frequency approximation neglecting the higher order harmonics which is valid for tuning the system at the fundamental harmonics of the switching frequency.
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 375-380
Reactive power compensation in three phase high output inductive power transfer
Inductive power transfer becomes increasingly more popular as a method for contact less charging of high power loads. Enabled by the rapid progress in power electronics components and controls, the power transfer solutions cross the previously unattainable boundaries of power levels and cost limits. Because of the high frequencies necessary for voltage induction in the secondary parts of the transformers and because of a rather low magnetic coupling, the system would have to constantly supply high levels of the reactive power, generating very high losses and limiting the available output power. Various tuning techniques have developed to tune-out the reactive power. In this paper a systematic approach to tuning of a high power three phase coupled transformer is presented and arithmetical calculations backed by simulation utilizing its values from the electromagnetic FEA analysis. The approach is based on the fundamental frequency approximation neglecting the higher order harmonics which is valid for tuning the system at the fundamental harmonics of the switching frequency.
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 369-374
Effects of parallel load-side compensation in wireless power transfer
High reliability and ever increasing cost-effectiveness of power electronics components and digital processors have resulted in high interests in inductive power transfer techniques. The interest is directed mostly at electric and hybrid passenger car battery charging, although the first solutions have already been conceptualized and turned into homologated products for much higher power levels for bus and light rail vehicles. Transformers used for automotive applications have a large air gap and relatively low coupling coefficients. High levels of output power require tuning techniques in order to eliminate or decrease the associated reactive power. In this paper a parallel load side compensation technique and its consequences are described. The analysis is done by utilizing a novel method based on Boucherot Bridge model for the wireless power transformer. The analytical results are confirmed by circuit simulation using the transformer parameters derived from finite element electromagnetic analysis.
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 369-374
Effects of parallel load-side compensation in wireless power transfer
High reliability and ever increasing cost-effectiveness of power electronics components and digital processors have resulted in high interests in inductive power transfer techniques. The interest is directed mostly at electric and hybrid passenger car battery charging, although the first solutions have already been conceptualized and turned into homologated products for much higher power levels for bus and light rail vehicles. Transformers used for automotive applications have a large air gap and relatively low coupling coefficients. High levels of output power require tuning techniques in order to eliminate or decrease the associated reactive power. In this paper a parallel load side compensation technique and its consequences are described. The analysis is done by utilizing a novel method based on Boucherot Bridge model for the wireless power transformer. The analytical results are confirmed by circuit simulation using the transformer parameters derived from finite element electromagnetic analysis.
- 22 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 31 (4) , 3036-3042
Design and Development of an Efficient Multilevel DC/AC Traction Inverter for Railway Transportation Electrification
This paper presents a new trend in the transportation industry to adopt the multilevel inverter-based propulsion systems and gives the design procedure of a new DC/AC three-phase six-level inverter for powering the rail metro cars. The proposed inverter is based on the multilevel converter as it possesses much lower component voltage stress compared with the pulsewidth-modulated (PWM) topologies. Space vector pulsewidth modulation (SVPWM) with back-to-back clamped diode voltage modulation operation is used to achieve voltage regulation and high efficiency at any loading condition. Zero-current-switching operation is achieved without using an auxiliary circuit, which leads to minimum switching losses. The novelty of the proposed inverter lies within the proposed control methodology, which uses a new switching pattern that guarantees a modified SVPWM to eliminate the unwanted harmonics from the output voltage. The new algorithm is developed using numerical iterative solution using the Newton-Raphson technique that was downloaded to the processor using digital signal processing developed code. The mathematical model is simple but proven to be effective. As a result, a higher operating efficiency at full load of 98.5% is achieved as compared to previous efficiency of 97%. Analytical, simulation, and experimental results of a 1500 Vdc/700 Vac 400-kW converter are presented to offer the proof of concept. The converter provides real estate savings for the train under floor layout, higher operating efficiency as well as better cost price than the conventional two-level PWM hard-switched converters.
- 22 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 31 (4) , 3036-3042
Design and Development of an Efficient Multilevel DC/AC Traction Inverter for Railway Transportation Electrification
This paper presents a new trend in the transportation industry to adopt the multilevel inverter-based propulsion systems and gives the design procedure of a new DC/AC three-phase six-level inverter for powering the rail metro cars. The proposed inverter is based on the multilevel converter as it possesses much lower component voltage stress compared with the pulsewidth-modulated (PWM) topologies. Space vector pulsewidth modulation (SVPWM) with back-to-back clamped diode voltage modulation operation is used to achieve voltage regulation and high efficiency at any loading condition. Zero-current-switching operation is achieved without using an auxiliary circuit, which leads to minimum switching losses. The novelty of the proposed inverter lies within the proposed control methodology, which uses a new switching pattern that guarantees a modified SVPWM to eliminate the unwanted harmonics from the output voltage. The new algorithm is developed using numerical iterative solution using the Newton-Raphson technique that was downloaded to the processor using digital signal processing developed code. The mathematical model is simple but proven to be effective. As a result, a higher operating efficiency at full load of 98.5% is achieved as compared to previous efficiency of 97%. Analytical, simulation, and experimental results of a 1500 Vdc/700 Vac 400-kW converter are presented to offer the proof of concept. The converter provides real estate savings for the train under floor layout, higher operating efficiency as well as better cost price than the conventional two-level PWM hard-switched converters.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A misalignment-tolerant wireless power transfer system for transportation applications
A practical transformer with enhanced misalignment tolerability for wireless-power-transfer (WPT) is presented. The generalized structure of the transformer is explained through a systematic approach. The proposed system is capable of operating with misalignments as large as half of the primary winding length with a minimal drop in voltage or increase in emissions. This solution facilitates realizing of misalignment-tolerant WPT systems through a systematic approach.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A misalignment-tolerant wireless power transfer system for transportation applications
A practical transformer with enhanced misalignment tolerability for wireless-power-transfer (WPT) is presented. The generalized structure of the transformer is explained through a systematic approach. The proposed system is capable of operating with misalignments as large as half of the primary winding length with a minimal drop in voltage or increase in emissions. This solution facilitates realizing of misalignment-tolerant WPT systems through a systematic approach.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
A fixed-frequency soft switching series resonant converter with adaptive auxiliary circuit for transportation applications
Frequency modulation is often used in series resonant converters to gain output voltage regulation. Variable frequency however brings challenges for EMI filter and switch driver design and the desirable zero voltage switching cannot be maintained at light load conditions. This paper presents a fixed-frequency series resonant converter with phase shift modulation and an adaptive passive auxiliary circuit proposed to ensure the zero voltage switching of the converter in all three operation modes with reduced losses for the lagging leg.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
A fixed-frequency soft switching series resonant converter with adaptive auxiliary circuit for transportation applications
Frequency modulation is often used in series resonant converters to gain output voltage regulation. Variable frequency however brings challenges for EMI filter and switch driver design and the desirable zero voltage switching cannot be maintained at light load conditions. This paper presents a fixed-frequency series resonant converter with phase shift modulation and an adaptive passive auxiliary circuit proposed to ensure the zero voltage switching of the converter in all three operation modes with reduced losses for the lagging leg.