Satoshi Matsushita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Satoshi Matsushita has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
Kazuo Akagi
Department of Polymer Chemistry, Kyoto University, Katsura, Kyoto 615-8510, Japan
13 shared publications- Kazuo Akagi
Department of Polymer Chemistry
12 shared publications - Bairu Yan
Department of Polymer Chemistry, Kyoto University, Katsura, Kyoto 615-8510, Japan
7 shared publications Mutsumasa Kyotani
6 shared publicationsYong Soo Jeong
Department of Polymer Chemistry Kyoto University Katsura Kyoto 615‐8510 Japan
4 shared publicationsBenedict A. San Jose
Department of Polymer Chemistry, Kyoto University, Katsura, Kyoto 615-8510, Japan
3 shared publications
Latest Publications
- Open Access
Orientation Control of Perfluorosulfonic Acid Films via Addition of 1,2,4-Triazole during Casting
Perfluorosulfonic acid (PFSA) polymers are used as electrolyte membranes in polymer electrolyte fuel cells. To investigate the effect on proton conductivity through structural orientation control, we added 1,2,4-triazole to PFSA films during casting to impart anisotropy to the ion-cluster structure of the films. The proton conductivities of the films were found to be high in the film-surface direction and low in the film-thickness direction. Structural analysis using small-angle X-ray scattering suggested that the anisotropy in proton conductivity was due to anisotropy in the ion-cluster structure, which in turn was attributed to the formation of a phase-separated structure via strong bonding between sulfonic acid groups and 1,2,4-triazole during cast film formation and the surface segregation of fluorine. We expect the findings of this study to aid in the fabrication of PFSA films with controlled ion clusters.
Open AccessOrientation Control of Perfluorosulfonic Acid Films via Addition of 1,2,4-Triazole during Casting
Perfluorosulfonic acid (PFSA) polymers are used as electrolyte membranes in polymer electrolyte fuel cells. To investigate the effect on proton conductivity through structural orientation control, we added 1,2,4-triazole to PFSA films during casting to impart anisotropy to the ion-cluster structure of the films. The proton conductivities of the films were found to be high in the film-surface direction and low in the film-thickness direction. Structural analysis using small-angle X-ray scattering suggested that the anisotropy in proton conductivity was due to anisotropy in the ion-cluster structure, which in turn was attributed to the formation of a phase-separated structure via strong bonding between sulfonic acid groups and 1,2,4-triazole during cast film formation and the surface segregation of fluorine. We expect the findings of this study to aid in the fabrication of PFSA films with controlled ion clusters.
- Open Access
Crosslinked Sulfonated Polyphenylsulfone-Vinylon (CSPPSU-vinylon) Membranes for PEM Fuel Cells from SPPSU and Polyvinyl Alcohol (PVA)
A crosslinked sulfonated polyphenylsulfone (CSPPSU) polymer and polyvinyl alcohol (PVA) were thermally crosslinked; then, a CSPPSU-vinylon membrane was synthesized using a formalization reaction. Its use as an electrolyte membrane for fuel cells was investigated. PVA was synthesized from polyvinyl acetate (PVAc), using a saponification reaction. The CSPPSU-vinylon membrane was synthesized by the addition of PVA (5 wt%, 10 wt%, 20 wt%), and its chemical, mechanical, conductivity, and fuel cell properties were studied. The conductivity of the CSPPSU-10vinylon membrane is higher than that of the CSPPSU membrane, and a conductivity of 66 mS/cm was obtained at 120 °C and 90% RH (relative humidity). From a fuel cell evaluation at 80 °C, the CSPPSU-10vinylon membrane has a higher current density than CSPPSU and Nafion212 membranes, in both high (100% RH) and low humidification (60% RH). By using a CSPPSU-vinylon membrane instead of a CSPPSU membrane, the conductivity and fuel cell performance improved.
Open AccessCrosslinked Sulfonated Polyphenylsulfone-Vinylon (CSPPSU-vinylon) Membranes for PEM Fuel Cells from SPPSU and Polyvinyl Alcohol (PVA)
A crosslinked sulfonated polyphenylsulfone (CSPPSU) polymer and polyvinyl alcohol (PVA) were thermally crosslinked; then, a CSPPSU-vinylon membrane was synthesized using a formalization reaction. Its use as an electrolyte membrane for fuel cells was investigated. PVA was synthesized from polyvinyl acetate (PVAc), using a saponification reaction. The CSPPSU-vinylon membrane was synthesized by the addition of PVA (5 wt%, 10 wt%, 20 wt%), and its chemical, mechanical, conductivity, and fuel cell properties were studied. The conductivity of the CSPPSU-10vinylon membrane is higher than that of the CSPPSU membrane, and a conductivity of 66 mS/cm was obtained at 120 °C and 90% RH (relative humidity). From a fuel cell evaluation at 80 °C, the CSPPSU-10vinylon membrane has a higher current density than CSPPSU and Nafion212 membranes, in both high (100% RH) and low humidification (60% RH). By using a CSPPSU-vinylon membrane instead of a CSPPSU membrane, the conductivity and fuel cell performance improved.
- 1 September 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 196, 332-338
Low-density graphitic films prepared from iodine-doped enzymatically synthesized amylose films as carbonization precursors
- 1 September 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 196, 332-338
Low-density graphitic films prepared from iodine-doped enzymatically synthesized amylose films as carbonization precursors
- Open Access
- 29 May 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (35) , 19512-19523
Conjugated polymer-based carbonaceous films as binder-free carbon electrodes in supercapacitors
We present a facile preparation method for carbonaceous film electrodes using poly(3,4-ethylenedioxythiophene) (PEDOT) and polyacetylene (PA) films as precursors via a morphology-retaining carbonization process. Carbonization was performed on acceptor-doped conjugated polymer films in the temperature range of 600–1100 °C. The obtained carbonaceous films had similar surface morphologies to those of the original conjugated polymer films. The carbonaceous film prepared from the electrochemically synthesized PEDOT film and the carbon film prepared from the chemically synthesized PA film showed hierarchical porous structures consisting of granular and fibril morphologies, respectively. The PEDOT and PA films carbonized at 1100 °C exhibited average electrical conductivities of 2.1 × 100 S cm−1 and 9.9 × 101 S cm−1, respectively. The carbonaceous films could be used as binder-free carbon electrodes in supercapacitors, and the PEDOT-based carbonaceous film prepared in the range of 1000–1100 °C exhibited the most efficient performance on the basis of the electrochemical capacitance in neutral and alkaline aqueous solutions determined from cyclic voltammograms and galvanostatic charge/discharge curves. This approach requires no binders/additives and no further activation processes or additional treatments for the enhancement of the capacities of the carbon materials, enabling one-step fabrication and their direct use as carbon electrodes for energy-storage devices. This is the first report of PEDOT- and PA-based carbonaceous films being used as carbon electrodes in supercapacitors.
- 29 May 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (35) , 19512-19523
Open AccessConjugated polymer-based carbonaceous films as binder-free carbon electrodes in supercapacitors
We present a facile preparation method for carbonaceous film electrodes using poly(3,4-ethylenedioxythiophene) (PEDOT) and polyacetylene (PA) films as precursors via a morphology-retaining carbonization process. Carbonization was performed on acceptor-doped conjugated polymer films in the temperature range of 600–1100 °C. The obtained carbonaceous films had similar surface morphologies to those of the original conjugated polymer films. The carbonaceous film prepared from the electrochemically synthesized PEDOT film and the carbon film prepared from the chemically synthesized PA film showed hierarchical porous structures consisting of granular and fibril morphologies, respectively. The PEDOT and PA films carbonized at 1100 °C exhibited average electrical conductivities of 2.1 × 100 S cm−1 and 9.9 × 101 S cm−1, respectively. The carbonaceous films could be used as binder-free carbon electrodes in supercapacitors, and the PEDOT-based carbonaceous film prepared in the range of 1000–1100 °C exhibited the most efficient performance on the basis of the electrochemical capacitance in neutral and alkaline aqueous solutions determined from cyclic voltammograms and galvanostatic charge/discharge curves. This approach requires no binders/additives and no further activation processes or additional treatments for the enhancement of the capacities of the carbon materials, enabling one-step fabrication and their direct use as carbon electrodes for energy-storage devices. This is the first report of PEDOT- and PA-based carbonaceous films being used as carbon electrodes in supercapacitors.
- 1 March 2018
- Published by Elsevier in Solid State Ionics
- Vol. 316, 102-109
Organic solvent-free preparation of electrolyte membranes with high proton conductivity using aromatic hydrocarbon polymers and small cross-linker molecules
- 1 March 2018
- Published by Elsevier in Solid State Ionics
- Vol. 316, 102-109
Organic solvent-free preparation of electrolyte membranes with high proton conductivity using aromatic hydrocarbon polymers and small cross-linker molecules
- 5 July 2017
- Published by Wiley in Advanced Functional Materials
- Vol. 27 (32)
Electrochromically and Photochromically Controllable Multifunctional OligoEDOT Derivatives
Multifunctional conjugated co‐oligomers with electrochromic and photochromic properties are synthesized by a cross‐coupling polycondensation reaction between bis(trialkylstannyl)‐3,4‐ethylenedioxythiophene and a phenylene or thienylene derivative bearing a photoresponsive dithienylethene (DE) moiety. The oligomer exhibits a reversible change between the neutral and oxidized states of the main chain upon electrochemical doping and dedoping. Furthermore, the oligomer shows reversible photoisomerization between the open and closed forms of the DE group in the side chain upon irradiation with ultraviolet and visible light. As a consequence, the oligomers possess various electronic structures that show cyclically reversible changes via the electrochemical doping and dedoping, and photoisomerization, producing four types of colored films in an oligomer system. Among the four types of electronic structures, only the dopant‐free oligomer film with the open form of the DE group shows visible fluorescence. To the best of our knowledge, the present conjugated oligomers are the first to exhibit both electrochromic and photochromic functions with cyclical reversibility.
- 5 July 2017
- Published by Wiley in Advanced Functional Materials
- Vol. 27 (32)
Electrochromically and Photochromically Controllable Multifunctional OligoEDOT Derivatives
Multifunctional conjugated co‐oligomers with electrochromic and photochromic properties are synthesized by a cross‐coupling polycondensation reaction between bis(trialkylstannyl)‐3,4‐ethylenedioxythiophene and a phenylene or thienylene derivative bearing a photoresponsive dithienylethene (DE) moiety. The oligomer exhibits a reversible change between the neutral and oxidized states of the main chain upon electrochemical doping and dedoping. Furthermore, the oligomer shows reversible photoisomerization between the open and closed forms of the DE group in the side chain upon irradiation with ultraviolet and visible light. As a consequence, the oligomers possess various electronic structures that show cyclically reversible changes via the electrochemical doping and dedoping, and photoisomerization, producing four types of colored films in an oligomer system. Among the four types of electronic structures, only the dopant‐free oligomer film with the open form of the DE group shows visible fluorescence. To the best of our knowledge, the present conjugated oligomers are the first to exhibit both electrochromic and photochromic functions with cyclical reversibility.
- 23 March 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (15) , 3823-3829
Aligned carbon and graphite fibers prepared from poly(3,4-ethylenedioxythiophene) single crystals synthesized by solid-state polymerization and their supercapacitor performance
Aligned carbon and graphite fibers with high crystallinity are prepared from doped and dedoped poly(3,4-ethylenedioxythiophene) (PEDOT) fibers synthesized through solid-state polymerization. X-ray diffraction and Raman scattering analyses show that the graphite fibers produced from doped solid-state polymerized PEDOT (SSP-PEDOT) are more crystalline than the fibers produced from the dedoped polymer. Scanning electron microscopy indicates that the graphite fibers have plate and layer morphologies in the through and edge directions, respectively. The graphene layers tend to align parallel to the graphite fibers along both the long axis and the surface of the aggregates of fine acicular graphite crystals with a remarkable orientation factor of 0.85. The electrical conductivity of the graphite fibers is on the order of 102 S cm−1 along the fiber axis. Furthermore, carbon films produced from SSP-PEDOT treated at 800 °C showed good capacitance performance in a basic electrolyte, which indicates a new direction for the usage of SSP-PEDOT.
- 23 March 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (15) , 3823-3829
Aligned carbon and graphite fibers prepared from poly(3,4-ethylenedioxythiophene) single crystals synthesized by solid-state polymerization and their supercapacitor performance
Aligned carbon and graphite fibers with high crystallinity are prepared from doped and dedoped poly(3,4-ethylenedioxythiophene) (PEDOT) fibers synthesized through solid-state polymerization. X-ray diffraction and Raman scattering analyses show that the graphite fibers produced from doped solid-state polymerized PEDOT (SSP-PEDOT) are more crystalline than the fibers produced from the dedoped polymer. Scanning electron microscopy indicates that the graphite fibers have plate and layer morphologies in the through and edge directions, respectively. The graphene layers tend to align parallel to the graphite fibers along both the long axis and the surface of the aggregates of fine acicular graphite crystals with a remarkable orientation factor of 0.85. The electrical conductivity of the graphite fibers is on the order of 102 S cm−1 along the fiber axis. Furthermore, carbon films produced from SSP-PEDOT treated at 800 °C showed good capacitance performance in a basic electrolyte, which indicates a new direction for the usage of SSP-PEDOT.
- 1 December 2016
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 28 (23) , 8781-8791
An Advanced Method for Preparation of Helical Carbon and Graphitic Films Using a Carbonization Substrate
- 1 December 2016
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 28 (23) , 8781-8791
An Advanced Method for Preparation of Helical Carbon and Graphitic Films Using a Carbonization Substrate
- Open Access
- 25 November 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 37783
Apparent Power Law Scaling of Variable Range Hopping Conduction in Carbonized Polymer Nanofibers
We induce dramatic changes in the structure of conducting polymer nanofibers by carbonization at 800 °C and compare charge transport properties between carbonized and pristine nanofibers. Despite the profound structural differences, both types of systems display power law dependence of current with voltage and temperature, and all measurements can be scaled into a single universal curve. We analyze our experimental data in the framework of variable range hopping and argue that this mechanism can explain transport properties of pristine polymer nanofibers as well.
- 25 November 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 37783
Open AccessApparent Power Law Scaling of Variable Range Hopping Conduction in Carbonized Polymer Nanofibers
We induce dramatic changes in the structure of conducting polymer nanofibers by carbonization at 800 °C and compare charge transport properties between carbonized and pristine nanofibers. Despite the profound structural differences, both types of systems display power law dependence of current with voltage and temperature, and all measurements can be scaled into a single universal curve. We analyze our experimental data in the framework of variable range hopping and argue that this mechanism can explain transport properties of pristine polymer nanofibers as well.
- 12 October 2016
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 49 (20) , 7703-7708
Liquid Crystallinity Enforced Chirality Transfer from Chiral Monosubstituted Polyacetylene Copolymer to Poly(p-phenylene ethynylene)
- 12 October 2016
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 49 (20) , 7703-7708
Liquid Crystallinity Enforced Chirality Transfer from Chiral Monosubstituted Polyacetylene Copolymer to Poly(p-phenylene ethynylene)