Omnia Gamal El-Dien
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Omnia Gamal El-Dien has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Blaise Ratcliffe
Department of Forest and Conservation Sciences, Faculty of Forestry, University of British Columbia, Vancouver, Canada
5 shared publications - Ilga Porth
Institut de Biologie Intégrative et des Systèmes (IBIS), Université Laval, Québec, QC G1V 0A6, Canada
5 shared publications - Jaroslav Klápště
Scion (New Zealand Forest Research Institute Ltd.)
5 shared publications - Yousry A. El-Kassaby
Faculty of Forestry and Environmental Stewardship, The University of British Columbia, Canada
5 shared publications - Carol Ritland
Department of Forest and Conservation Sciences, Faculty of Forestry and Environmental Stewardship University of British Columbia Vancouver Canada
4 shared publications - Charles Chen
Department of Biochemistry and Molecular Biology, Oklahoma State University, Stillwater, USA
4 shared publications
Latest Publications
- Open Access
- 6 August 2024
- Published by Wiley in New Phytologist
- Vol. 244 (2) , 588-602
Genomic selection in western redcedar: from proof of concept to operational application
Summary: Forests face many threats. While traditional breeding may be too slow to deliver well‐adapted trees, genomic selection (GS) can accelerate the process. We describe a comprehensive study of GS from proof of concept to operational application in western redcedar (WRC, Thuja plicata). Using genomic data, we developed models on a training population (TrP) of trees to predict breeding values (BVs) in a target seedling population (TaP) for growth, heartwood chemistry, and foliar chemistry traits. We used cross‐validation to assess prediction accuracy (PACC) in the TrP; we also validated models for early‐expressed foliar traits in the TaP. Prediction accuracy was high across generations, environments, and ages. PACC was not reduced to zero among unrelated individuals in TrP and was only slightly reduced in the TaP, confirming strong linkage disequilibrium and the ability of the model to generate accurate predictions across breeding generations. Genomic BV predictions were correlated with those from pedigree but displayed a wider range of within‐family variation due to the ability of GS to capture the Mendelian sampling term. Using predicted TaP BVs in multi‐trait selection, we functionally implemented and integrated GS into an operational tree‐breeding program.
- 6 August 2024
- Published by Wiley in New Phytologist
- Vol. 244 (2) , 588-602
Open AccessGenomic selection in western redcedar: from proof of concept to operational application
Summary: Forests face many threats. While traditional breeding may be too slow to deliver well‐adapted trees, genomic selection (GS) can accelerate the process. We describe a comprehensive study of GS from proof of concept to operational application in western redcedar (WRC, Thuja plicata). Using genomic data, we developed models on a training population (TrP) of trees to predict breeding values (BVs) in a target seedling population (TaP) for growth, heartwood chemistry, and foliar chemistry traits. We used cross‐validation to assess prediction accuracy (PACC) in the TrP; we also validated models for early‐expressed foliar traits in the TaP. Prediction accuracy was high across generations, environments, and ages. PACC was not reduced to zero among unrelated individuals in TrP and was only slightly reduced in the TaP, confirming strong linkage disequilibrium and the ability of the model to generate accurate predictions across breeding generations. Genomic BV predictions were correlated with those from pedigree but displayed a wider range of within‐family variation due to the ability of GS to capture the Mendelian sampling term. Using predicted TaP BVs in multi‐trait selection, we functionally implemented and integrated GS into an operational tree‐breeding program.
- Open Access
- 15 September 2022
- Published by Cold Spring Harbor Laboratory in Genome Research
- Vol. 32 (10) , 1952-1964
The western redcedar genome reveals low genetic diversity in a self-compatible conifer
We assembled the 9.8-Gbp genome of western redcedar (WRC;Thuja plicata), an ecologically and economically important conifer species of the Cupressaceae. The genome assembly, derived from a uniquely inbred tree produced through five generations of self-fertilization (selfing), was determined to be 86% complete by BUSCO analysis, one of the most complete genome assemblies for a conifer. Population genomic analysis revealed WRC to be one of the most genetically depauperate wild plant species, with an effective population size of approximately 300 and no significant genetic differentiation across its geographic range. Nucleotide diversity, π, is low for a continuous tree species, with many loci showing zero diversity, and the ratio of π at zero- to fourfold degenerate sites is relatively high (approximately 0.33), suggestive of weak purifying selection. Using an array of genetic lines derived from up to five generations of selfing, we explored the relationship between genetic diversity and mating system. Although overall heterozygosity was found to decline faster than expected during selfing, heterozygosity persisted at many loci, and nearly 100 loci were found to deviate from expectations of genetic drift, suggestive of associative overdominance. Nonreference alleles at such loci often harbor deleterious mutations and are rare in natural populations, implying that balanced polymorphisms are maintained by linkage to dominant beneficial alleles. This may account for how WRC remains responsive to natural and artificial selection, despite low genetic diversity.
- 15 September 2022
- Published by Cold Spring Harbor Laboratory in Genome Research
- Vol. 32 (10) , 1952-1964
Open AccessThe western redcedar genome reveals low genetic diversity in a self-compatible conifer
We assembled the 9.8-Gbp genome of western redcedar (WRC;Thuja plicata), an ecologically and economically important conifer species of the Cupressaceae. The genome assembly, derived from a uniquely inbred tree produced through five generations of self-fertilization (selfing), was determined to be 86% complete by BUSCO analysis, one of the most complete genome assemblies for a conifer. Population genomic analysis revealed WRC to be one of the most genetically depauperate wild plant species, with an effective population size of approximately 300 and no significant genetic differentiation across its geographic range. Nucleotide diversity, π, is low for a continuous tree species, with many loci showing zero diversity, and the ratio of π at zero- to fourfold degenerate sites is relatively high (approximately 0.33), suggestive of weak purifying selection. Using an array of genetic lines derived from up to five generations of selfing, we explored the relationship between genetic diversity and mating system. Although overall heterozygosity was found to decline faster than expected during selfing, heterozygosity persisted at many loci, and nearly 100 loci were found to deviate from expectations of genetic drift, suggestive of associative overdominance. Nonreference alleles at such loci often harbor deleterious mutations and are rare in natural populations, implying that balanced polymorphisms are maintained by linkage to dominant beneficial alleles. This may account for how WRC remains responsive to natural and artificial selection, despite low genetic diversity.
- Open Access
The western redcedar genome reveals low genetic diversity in a self-compatible conifer
We assembled the 9.8 Gbp genome of western redcedar (WRC, Thuja plicata ), an ecologically and economically important conifer species of the Cupressaceae. The genome assembly, derived from a uniquely inbred tree produced through five generations of self-fertilization (selfing), was determined to be 86% complete by BUSCO analysis – one of the most complete genome assemblies for a conifer. Population genomic analysis revealed WRC to be one of the most genetically depauperate wild plant species, with an effective population size of approximately 300 and no significant genetic differentiation across its geographic range. Nucleotide diversity, π, is low for a continuous tree species, with many loci exhibiting zero diversity, and the ratio of π at zero-to four-fold degenerate sites is relatively high (∼ 0.33), suggestive of weak purifying selection. Using an array of genetic lines derived from up to five generations of selfing, we explored the relationship between genetic diversity and mating system. While overall heterozygosity was found to decline faster than expected during selfing, heterozygosity persisted at many loci, and nearly 100 loci were found to deviate from expectations of genetic drift, suggestive of associative overdominance. Non-reference alleles at such loci often harbor deleterious mutations and are rare in natural populations, implying that balanced polymorphisms are maintained by linkage to dominant beneficial alleles. This may account for how WRC remains responsive to natural and artificial selection, despite low genetic diversity.
Open AccessThe western redcedar genome reveals low genetic diversity in a self-compatible conifer
We assembled the 9.8 Gbp genome of western redcedar (WRC, Thuja plicata ), an ecologically and economically important conifer species of the Cupressaceae. The genome assembly, derived from a uniquely inbred tree produced through five generations of self-fertilization (selfing), was determined to be 86% complete by BUSCO analysis – one of the most complete genome assemblies for a conifer. Population genomic analysis revealed WRC to be one of the most genetically depauperate wild plant species, with an effective population size of approximately 300 and no significant genetic differentiation across its geographic range. Nucleotide diversity, π, is low for a continuous tree species, with many loci exhibiting zero diversity, and the ratio of π at zero-to four-fold degenerate sites is relatively high (∼ 0.33), suggestive of weak purifying selection. Using an array of genetic lines derived from up to five generations of selfing, we explored the relationship between genetic diversity and mating system. While overall heterozygosity was found to decline faster than expected during selfing, heterozygosity persisted at many loci, and nearly 100 loci were found to deviate from expectations of genetic drift, suggestive of associative overdominance. Non-reference alleles at such loci often harbor deleterious mutations and are rare in natural populations, implying that balanced polymorphisms are maintained by linkage to dominant beneficial alleles. This may account for how WRC remains responsive to natural and artificial selection, despite low genetic diversity.
- Open Access
- 23 August 2022
- Published by Wiley in Evolutionary Applications
- Vol. 15 (8) , 1291-1312
Genomic selection reveals hidden relatedness and increased breeding efficiency in western redcedar polycross breeding
Western redcedar (WRC) is an ecologically and economically important forest tree species characterized by low genetic diversity with high self‐compatibility and high heartwood durability. Using sequence capture genotyping of target genic and non‐genic regions, we genotyped 44 parent trees and 1520 offspring trees representing 26 polycross (PX) families collected from three progeny test sites using 45,378 SNPs. Trees were phenotyped for eight traits related to growth, heartwood and foliar chemistry associated with wood durability and deer browse resistance. We used the genomic realized relationship matrix for paternity assignment, maternal pedigree correction, and to estimate genetic parameters. We compared genomics‐based (GBLUP) and two pedigree‐based (ABLUP: polycross and reconstructed full‐sib [FS] pedigrees) models. Models were extended to estimate dominance genetic effects. Pedigree reconstruction revealed significant unequal male contribution and separated the 26 PX families into 438 FS families. Traditional maternal PX pedigree analysis resulted in up to 51% overestimation in genetic gain and 44% in diversity. Genomic analysis resulted in up to 22% improvement in offspring breeding value (BV) theoretical accuracy, 35% increase in expected genetic gain for forward selection, and doubled selection intensity for backward selection. Overall, all traits showed low to moderate heritability (0.09–0.28), moderate genotype by environment interaction (type‐B genetic correlation: 0.51–0.80), low to high expected genetic gain (6.01%–55%), and no significant negative genetic correlation reflecting no large trade‐offs for multi‐trait selection. Only three traits showed a significant dominance effect. GBLUP resulted in smaller but more accurate heritability estimates for five traits, but larger estimates for the wood traits. Comparison between all, genic‐coding, genic‐non‐coding and intergenic SNPs showed little difference in genetic estimates. In summary, we show that GBLUP overcomes the PX limitations, successfully captures expected historical and hidden relatedness as well as linkage disequilibrium (LD), and results in increased breeding efficiency in WRC.
- 23 August 2022
- Published by Wiley in Evolutionary Applications
- Vol. 15 (8) , 1291-1312
Open AccessGenomic selection reveals hidden relatedness and increased breeding efficiency in western redcedar polycross breeding
Western redcedar (WRC) is an ecologically and economically important forest tree species characterized by low genetic diversity with high self‐compatibility and high heartwood durability. Using sequence capture genotyping of target genic and non‐genic regions, we genotyped 44 parent trees and 1520 offspring trees representing 26 polycross (PX) families collected from three progeny test sites using 45,378 SNPs. Trees were phenotyped for eight traits related to growth, heartwood and foliar chemistry associated with wood durability and deer browse resistance. We used the genomic realized relationship matrix for paternity assignment, maternal pedigree correction, and to estimate genetic parameters. We compared genomics‐based (GBLUP) and two pedigree‐based (ABLUP: polycross and reconstructed full‐sib [FS] pedigrees) models. Models were extended to estimate dominance genetic effects. Pedigree reconstruction revealed significant unequal male contribution and separated the 26 PX families into 438 FS families. Traditional maternal PX pedigree analysis resulted in up to 51% overestimation in genetic gain and 44% in diversity. Genomic analysis resulted in up to 22% improvement in offspring breeding value (BV) theoretical accuracy, 35% increase in expected genetic gain for forward selection, and doubled selection intensity for backward selection. Overall, all traits showed low to moderate heritability (0.09–0.28), moderate genotype by environment interaction (type‐B genetic correlation: 0.51–0.80), low to high expected genetic gain (6.01%–55%), and no significant negative genetic correlation reflecting no large trade‐offs for multi‐trait selection. Only three traits showed a significant dominance effect. GBLUP resulted in smaller but more accurate heritability estimates for five traits, but larger estimates for the wood traits. Comparison between all, genic‐coding, genic‐non‐coding and intergenic SNPs showed little difference in genetic estimates. In summary, we show that GBLUP overcomes the PX limitations, successfully captures expected historical and hidden relatedness as well as linkage disequilibrium (LD), and results in increased breeding efficiency in WRC.
- Open Access
- 7 February 2019
- Published by Cold Spring Harbor Laboratory in bioRxiv
- p. 540765
Inter- and Intra-Generation Genomic Predictions for Douglas-fir Growth in Unobserved Environments
Conifers are prime candidates for genomic selection (GS) due to their long breeding cycles. Previous studies have shown much reduced prediction accuracies (PA) of breeding values in unobserved environments, which may impede its adoption. The impact of explicit environmental heterogeneity modeling including genotype-by-environment (G×E) interaction effects using environmental covariates (EC) in a reaction-norm genomic prediction model was tested using single-step GBLUP (ssGBLUP). A three-generation coastal Douglas-fir experimental population with 14 genetic trials (n = 13,615) permitted estimation of intra- and inter-generation PA in unobserved environments using 66,969 SNPs derived from exome capture. Intra- and inter-generation PAs ranged from 0.447-0.640 and 0.317-0.538, respectively. The inclusion of ECs in the prediction models explained up to 23% of the phenotypic variation for the fully specified model and resulted in the best model fit. Modeling G×E effects in the training population increased PA up to 6% and 13% over the base model for inter- and intra-generations, respectively. GS-PA can be substantially improved using ECs to explain environmental heterogeneity and G×E effects. The ssGBLUP methodology allows historical genetic trials containing non-genotyped samples to contribute in genomic prediction, and, thus, effectively boosting training population size which is a critical step. Further pheno- and enviro-typing developments may improve GS-PA.
- 7 February 2019
- Published by Cold Spring Harbor Laboratory in bioRxiv
- p. 540765
Open AccessInter- and Intra-Generation Genomic Predictions for Douglas-fir Growth in Unobserved Environments
Conifers are prime candidates for genomic selection (GS) due to their long breeding cycles. Previous studies have shown much reduced prediction accuracies (PA) of breeding values in unobserved environments, which may impede its adoption. The impact of explicit environmental heterogeneity modeling including genotype-by-environment (G×E) interaction effects using environmental covariates (EC) in a reaction-norm genomic prediction model was tested using single-step GBLUP (ssGBLUP). A three-generation coastal Douglas-fir experimental population with 14 genetic trials (n = 13,615) permitted estimation of intra- and inter-generation PA in unobserved environments using 66,969 SNPs derived from exome capture. Intra- and inter-generation PAs ranged from 0.447-0.640 and 0.317-0.538, respectively. The inclusion of ECs in the prediction models explained up to 23% of the phenotypic variation for the fully specified model and resulted in the best model fit. Modeling G×E effects in the training population increased PA up to 6% and 13% over the base model for inter- and intra-generations, respectively. GS-PA can be substantially improved using ECs to explain environmental heterogeneity and G×E effects. The ssGBLUP methodology allows historical genetic trials containing non-genotyped samples to contribute in genomic prediction, and, thus, effectively boosting training population size which is a critical step. Further pheno- and enviro-typing developments may improve GS-PA.
- Open Access
- 15 February 2018
- Published by Springer Nature in Molecular Breeding
- Vol. 38 (3) , 1-16
Multienvironment genomic variance decomposition analysis of open-pollinated Interior spruce (Picea glauca x engelmannii)
The advantages of open-pollinated (OP) family testing over controlled crossing (i.e., structured pedigree) are the potential to screen and rank a large number of parents and offspring with minimal cost and efforts; however, the method produces inflated genetic parameters as the actual sibling relatedness within OP families rarely meets the half-sib relatedness assumption. Here, we demonstrate the unsurpassed utility of OP testing after shifting the analytical mode from pedigree- (ABLUP) to genomic-based (GBLUP) relationship using phenotypic tree height (HT) and wood density (WD) and genotypic (30k SNPs) data for 1126 38-year-old Interior spruce (Picea glauca (Moench) Voss x P. engelmannii Parry ex Engelm.) trees, representing 25 OP families, growing on three sites in Interior British Columbia, Canada. The use of the genomic realized relationship permitted genetic variance decomposition to additive, dominance, and epistatic genetic variances, and their interactions with the environment, producing more accurate narrow-sense heritability and breeding value estimates as compared to the pedigree-based counterpart. The impact of retaining (random folding) vs. removing (family folding) genetic similarity between the training and validation populations on the predictive accuracy of genomic selection was illustrated and highlighted the former caveats and latter advantages. Moreover, GBLUP models allowed breeding value prediction for individuals from families that were not included in the developed models, which was not possible with the ABLUP. Response to selection differences between the ABLUP and GBLUP models indicated the presence of systematic genetic gain overestimation of 35 and 63% for HT and WD, respectively, mainly caused by the inflated estimates of additive genetic variance and individuals’ breeding values given by the ABLUP models. Extending the OP genomic-based models from single to multisite made the analysis applicable to existing OP testing programs.
- 15 February 2018
- Published by Springer Nature in Molecular Breeding
- Vol. 38 (3) , 1-16
Open AccessMultienvironment genomic variance decomposition analysis of open-pollinated Interior spruce (Picea glauca x engelmannii)
The advantages of open-pollinated (OP) family testing over controlled crossing (i.e., structured pedigree) are the potential to screen and rank a large number of parents and offspring with minimal cost and efforts; however, the method produces inflated genetic parameters as the actual sibling relatedness within OP families rarely meets the half-sib relatedness assumption. Here, we demonstrate the unsurpassed utility of OP testing after shifting the analytical mode from pedigree- (ABLUP) to genomic-based (GBLUP) relationship using phenotypic tree height (HT) and wood density (WD) and genotypic (30k SNPs) data for 1126 38-year-old Interior spruce (Picea glauca (Moench) Voss x P. engelmannii Parry ex Engelm.) trees, representing 25 OP families, growing on three sites in Interior British Columbia, Canada. The use of the genomic realized relationship permitted genetic variance decomposition to additive, dominance, and epistatic genetic variances, and their interactions with the environment, producing more accurate narrow-sense heritability and breeding value estimates as compared to the pedigree-based counterpart. The impact of retaining (random folding) vs. removing (family folding) genetic similarity between the training and validation populations on the predictive accuracy of genomic selection was illustrated and highlighted the former caveats and latter advantages. Moreover, GBLUP models allowed breeding value prediction for individuals from families that were not included in the developed models, which was not possible with the ABLUP. Response to selection differences between the ABLUP and GBLUP models indicated the presence of systematic genetic gain overestimation of 35 and 63% for HT and WD, respectively, mainly caused by the inflated estimates of additive genetic variance and individuals’ breeding values given by the ABLUP models. Extending the OP genomic-based models from single to multisite made the analysis applicable to existing OP testing programs.
- Open Access
- 1 March 2017
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 7 (3) , 935-942
Single-Step BLUP with Varying Genotyping Effort in Open-Pollinated Picea glauca
Maximization of genetic gain in forest tree breeding programs is contingent on the accuracy of the predicted breeding values and precision of the estimated genetic parameters. We investigated the effect of the combined use of contemporary pedigree information and genomic relatedness estimates on the accuracy of predicted breeding values and precision of estimated genetic parameters, as well as rankings of selection candidates, using single-step genomic evaluation (HBLUP). In this study, two traits with diverse heritabilities [tree height (HT) and wood density (WD)] were assessed at various levels of family genotyping efforts (0, 25, 50, 75, and 100%) from a population of white spruce (Picea glauca) consisting of 1694 trees from 214 open-pollinated families, representing 43 provenances in Québec, Canada. The results revealed that HBLUP bivariate analysis is effective in reducing the known bias in heritability estimates of open-pollinated populations, as it exposes hidden relatedness, potential pedigree errors, and inbreeding. The addition of genomic information in the analysis considerably improved the accuracy in breeding value estimates by accounting for both Mendelian sampling and historical coancestry that were not captured by the contemporary pedigree alone. Increasing family genotyping efforts were associated with continuous improvement in model fit, precision of genetic parameters, and breeding value accuracy. Yet, improvements were observed even at minimal genotyping effort, indicating that even modest genotyping effort is effective in improving genetic evaluation. The combined utilization of both pedigree and genomic information may be a cost-effective approach to increase the accuracy of breeding values in forest tree breeding programs where shallow pedigrees and large testing populations are the norm.
- 1 March 2017
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 7 (3) , 935-942
Open AccessSingle-Step BLUP with Varying Genotyping Effort in Open-Pollinated Picea glauca
Maximization of genetic gain in forest tree breeding programs is contingent on the accuracy of the predicted breeding values and precision of the estimated genetic parameters. We investigated the effect of the combined use of contemporary pedigree information and genomic relatedness estimates on the accuracy of predicted breeding values and precision of estimated genetic parameters, as well as rankings of selection candidates, using single-step genomic evaluation (HBLUP). In this study, two traits with diverse heritabilities [tree height (HT) and wood density (WD)] were assessed at various levels of family genotyping efforts (0, 25, 50, 75, and 100%) from a population of white spruce (Picea glauca) consisting of 1694 trees from 214 open-pollinated families, representing 43 provenances in Québec, Canada. The results revealed that HBLUP bivariate analysis is effective in reducing the known bias in heritability estimates of open-pollinated populations, as it exposes hidden relatedness, potential pedigree errors, and inbreeding. The addition of genomic information in the analysis considerably improved the accuracy in breeding value estimates by accounting for both Mendelian sampling and historical coancestry that were not captured by the contemporary pedigree alone. Increasing family genotyping efforts were associated with continuous improvement in model fit, precision of genetic parameters, and breeding value accuracy. Yet, improvements were observed even at minimal genotyping effort, indicating that even modest genotyping effort is effective in improving genetic evaluation. The combined utilization of both pedigree and genomic information may be a cost-effective approach to increase the accuracy of breeding values in forest tree breeding programs where shallow pedigrees and large testing populations are the norm.
- Open Access
- 1 March 2016
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 6 (3) , 743-753
Implementation of the Realized Genomic Relationship Matrix to Open-Pollinated White Spruce Family Testing for Disentangling Additive from Nonadditive Genetic Effects
The open-pollinated (OP) family testing combines the simplest known progeny evaluation and quantitative genetics analyses as candidates' offspring are assumed to represent independent half-sib families. The accuracy of genetic parameter estimates is often questioned as the assumption of "half-sibling" in OP families may often be violated. We compared the pedigree- versus marker-based genetic models by analyzing 22-year height and 30-year wood density for 214 white spruce (Picea glauca (Moench) Voss) OP families represented by 1,694 individuals growing on one site in Quebec, Canada. Assuming half-sibling, the pedigree-based model was limited to estimating the additive genetic variances which, in turn, were grossly overestimated as they were confounded by very minor dominance and major additive-by-additive epistatic genetic variances. In contrast, the implemented genomic pairwise realized relationship models allowed the disentanglement of additive from all non-additive factors through genetic variance decomposition. The marker-based models produced more realistic narrow-sense heritability estimates and, for the first time, allowed estimating the dominance and epistatic genetic variances from OP testing. In addition, the genomic models showed better prediction accuracies compared to pedigree models and were able to predict individual breeding values for new individuals from untested families, which was not possible using the pedigree based model. Clearly, the use of marker-based relationship approach is effective in estimating the quantitative genetic parameters of complex traits' even under simple and shallow pedigree structure.
- 1 March 2016
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 6 (3) , 743-753
Open AccessImplementation of the Realized Genomic Relationship Matrix to Open-Pollinated White Spruce Family Testing for Disentangling Additive from Nonadditive Genetic Effects
The open-pollinated (OP) family testing combines the simplest known progeny evaluation and quantitative genetics analyses as candidates' offspring are assumed to represent independent half-sib families. The accuracy of genetic parameter estimates is often questioned as the assumption of "half-sibling" in OP families may often be violated. We compared the pedigree- versus marker-based genetic models by analyzing 22-year height and 30-year wood density for 214 white spruce (Picea glauca (Moench) Voss) OP families represented by 1,694 individuals growing on one site in Quebec, Canada. Assuming half-sibling, the pedigree-based model was limited to estimating the additive genetic variances which, in turn, were grossly overestimated as they were confounded by very minor dominance and major additive-by-additive epistatic genetic variances. In contrast, the implemented genomic pairwise realized relationship models allowed the disentanglement of additive from all non-additive factors through genetic variance decomposition. The marker-based models produced more realistic narrow-sense heritability estimates and, for the first time, allowed estimating the dominance and epistatic genetic variances from OP testing. In addition, the genomic models showed better prediction accuracies compared to pedigree models and were able to predict individual breeding values for new individuals from untested families, which was not possible using the pedigree based model. Clearly, the use of marker-based relationship approach is effective in estimating the quantitative genetic parameters of complex traits' even under simple and shallow pedigree structure.
- Open Access
- 9 May 2015
- Published by Springer Nature in BMC Genomics
- Vol. 16 (1) , 1-16
Prediction accuracies for growth and wood attributes of interior spruce in space using genotyping-by-sequencing
Genomic selection (GS) in forestry can substantially reduce the length of breeding cycle and increase gain per unit time through early selection and greater selection intensity, particularly for traits of low heritability and late expression. Affordable next-generation sequencing technologies made it possible to genotype large numbers of trees at a reasonable cost. Genotyping-by-sequencing was used to genotype 1,126 Interior spruce trees representing 25 open-pollinated families planted over three sites in British Columbia, Canada. Four imputation algorithms were compared (mean value (MI), singular value decomposition (SVD), expectation maximization (EM), and a newly derived, family-based k-nearest neighbor (kNN-Fam)). Trees were phenotyped for several yield and wood attributes. Single- and multi-site GS prediction models were developed using the Ridge Regression Best Linear Unbiased Predictor (RR-BLUP) and the Generalized Ridge Regression (GRR) to test different assumption about trait architecture. Finally, using PCA, multi-trait GS prediction models were developed. The EM and kNN-Fam imputation methods were superior for 30 and 60% missing data, respectively. The RR-BLUP GS prediction model produced better accuracies than the GRR indicating that the genetic architecture for these traits is complex. GS prediction accuracies for multi-site were high and better than those of single-sites while multi-site predictability produced the lowest accuracies reflecting type-b genetic correlations and deemed unreliable. The incorporation of genomic information in quantitative genetics analyses produced more realistic heritability estimates as half-sib pedigree tended to inflate the additive genetic variance and subsequently both heritability and gain estimates. Principle component scores as representatives of multi-trait GS prediction models produced surprising results where negatively correlated traits could be concurrently selected for using PCA2 and PCA3. The application of GS to open-pollinated family testing, the simplest form of tree improvement evaluation methods, was proven to be effective. Prediction accuracies obtained for all traits greatly support the integration of GS in tree breeding. While the within-site GS prediction accuracies were high, the results clearly indicate that single-site GS models ability to predict other sites are unreliable supporting the utilization of multi-site approach. Principle component scores provided an opportunity for the concurrent selection of traits with different phenotypic optima.
- 9 May 2015
- Published by Springer Nature in BMC Genomics
- Vol. 16 (1) , 1-16
Open AccessPrediction accuracies for growth and wood attributes of interior spruce in space using genotyping-by-sequencing
Genomic selection (GS) in forestry can substantially reduce the length of breeding cycle and increase gain per unit time through early selection and greater selection intensity, particularly for traits of low heritability and late expression. Affordable next-generation sequencing technologies made it possible to genotype large numbers of trees at a reasonable cost. Genotyping-by-sequencing was used to genotype 1,126 Interior spruce trees representing 25 open-pollinated families planted over three sites in British Columbia, Canada. Four imputation algorithms were compared (mean value (MI), singular value decomposition (SVD), expectation maximization (EM), and a newly derived, family-based k-nearest neighbor (kNN-Fam)). Trees were phenotyped for several yield and wood attributes. Single- and multi-site GS prediction models were developed using the Ridge Regression Best Linear Unbiased Predictor (RR-BLUP) and the Generalized Ridge Regression (GRR) to test different assumption about trait architecture. Finally, using PCA, multi-trait GS prediction models were developed. The EM and kNN-Fam imputation methods were superior for 30 and 60% missing data, respectively. The RR-BLUP GS prediction model produced better accuracies than the GRR indicating that the genetic architecture for these traits is complex. GS prediction accuracies for multi-site were high and better than those of single-sites while multi-site predictability produced the lowest accuracies reflecting type-b genetic correlations and deemed unreliable. The incorporation of genomic information in quantitative genetics analyses produced more realistic heritability estimates as half-sib pedigree tended to inflate the additive genetic variance and subsequently both heritability and gain estimates. Principle component scores as representatives of multi-trait GS prediction models produced surprising results where negatively correlated traits could be concurrently selected for using PCA2 and PCA3. The application of GS to open-pollinated family testing, the simplest form of tree improvement evaluation methods, was proven to be effective. Prediction accuracies obtained for all traits greatly support the integration of GS in tree breeding. While the within-site GS prediction accuracies were high, the results clearly indicate that single-site GS models ability to predict other sites are unreliable supporting the utilization of multi-site approach. Principle component scores provided an opportunity for the concurrent selection of traits with different phenotypic optima.