SOSeok-Young Oh

Seok-Young Oh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Seok-Young Oh has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Enhancing removal of contaminants by organic waste-derived chars via steam activation and salt treatment

    by Seok-Young Oh, Chanmo Park, Yujeong Cho

    This study aims to investigate the effects of salt treatment and steam activation on chars derived from biomass wastes (manure, food, and kenaf) and spent tires. Batch sorption experiments were used to evaluate the absorption performance of these chars for benzene, phenol, trichloroethylene (TCE), and arsenate. Steam activation of biochars at 900°C increased their specific surface area, enhancing the sorption of all contaminants. Steam-activated chars exhibited sorption capacities of 25-125 mg/g and 15-70 mg/g for benzene and phenol, respectively, one order of magnitude higher than those of pristine biochars. Further treatment with CaCO3 and CaSO4 decreased the sorption capacity of manure biochar for benzene by 10-30%. In contrast, treatment with CaCO3 and CaSO4 enhanced the sorption capacity of manure biochar for TCE and phenol by approximately 10% and 5-10%, respectively, due to reduced hydrophobicity and the formation of surface functional groups. Similarly, the salt treatment following steam activation slightly increased the sorption capacity for arsenate, reaching up to 1.6 mg/g. These findings suggest that steam activation and surface treatment with CaCO3 and CaSO4 selectively enhance the sorption of various contaminants in natural and engineered systems.Implications: Pyrolysis is widely explored as a final disposal process for various types of organic waste, including agricultural, food, biomass, and thermoplastic wastes, due to its ability to produce valuable by-products, bio-oil, biochar, and syngas as energy sources. Compared to direct combustion with excess air, biochar production may be less cost-effective due to the additional energy required for the pyrolysis process. To overcome this economic disadvantage, improving the properties of biochar via various processes has been proposed to provide additional value to biochar.It has been reported that chemical activation with salt treatment could enhance the porosity and surface area by facilitating carbonization and preventing structural collapse, and that the steam activation could develop micro- and mesopores in carbonized material by gasification of carbon at high temperature using steam. Compared to acid and oxidants, salt treatment is less toxic, easier to remove, and more sustainable. Moreover, compared to CO2 activation, steam is more reactive with carbon, allowing activation at lower temperatures and shorter times. In this study, we investigated the effects of salt treatment (CaCO3 and CaSO4) and steam activation (900 °C) on chars derived from biomass wastes (manure, food, and kenaf) and spent tires. Batch sorption experiments were used to evaluate the absorption performance of these chars for benzene, phenol, trichloroethylene (TCE), and arsenate. Steam activation and salt treatment of char may affect the sorption of contaminants differently, depending on the type of contaminants. Activated char may replace activated granular carbon via steam activation and/or salt treatment. We characterized the properties of steam-activated and salt-treated chars, evaluated their effectiveness as sorbents for various types of contaminants, assessed the role of steam activation and salt treatment, and examined the potential mechanisms involved in contaminant sorption.


  • Degradation of 2,4‐dinitrotoluene by iron sulfide/manganese sulfide–biochar composites in the presence of persulfate and hydrogen peroxide

    by Seok‐Young Oh, Do‐Gyeom Kim

    BACKGROUND: Iron sulfide/manganese sulfide (FeS/MnS)–biochar composites were synthesized and their effectiveness at removing 2,4‐dinitrotoluene (DNT) from water was evaluated. It was hypothesized that FeS/MnS–biochar composites have large surface areas for DNT sorption and reduction, and the capacity to promote persulfate‐ and hydrogen peroxide (H2O2)‐mediated DNT oxidation.RESULTS: Compared to removal by biochar alone, the removal of DNT by 2 and 50wt.% FeS–biochar composites (1 g dosage) was enhanced via sorption and reduction by 37% and 48%, respectively. As the biochar increased the pH, however, the FeS–biochar composite was not as effective as FeS alone at removing DNT, indicating that an acidic medium may be necessary for the reductive removal of DNT by the FeS–biochar composite. In contrast, MnS and MnS–biochar composite were not as effective at reducing DNT as FeS and the FeS–biochar composite. FeS–biochar composites demonstrated good catalytic efficacy and enhanced persulfate‐ and H2O2‐mediated DNT oxidation. The 50 wt% FeS–biochar composite (5 g dosage) removed 93% and 100% of DNT in the presence of persulfate/H2O2 (3 mmol L−1), respectively, under the given conditions. Both the Fe2+ in the FeS and the carbon in the FeS–biochar composites contributed to the catalytic enhancement of the DNT oxidation. Radical quenching tests and electron paramagnetic resonance spectroscopic analysis revealed that sulfate (SO4−∙) and hydroxyl (OH∙) radicals are dominant radical species to account for the enhancement of DNT oxidation. In contrast, neither Mn2+ nor S2− in MnS and MnS–biochar composite worked as a catalyst to enhance the DNT oxidation by persulfate/H2O2.CONCLUSION: The results of the present study indicate that FeS and FeS–biochar composites are promising as sorbents, reductants, and catalysts for the remediation of environmental DNT contamination. © 2025 Society of Chemical Industry (SCI).

  • Fluorine contamination, mobility, and risks in soils at a phosphate-gypsum waste landfill: a new analytical method and comparison with previous methods

    by Seok-Young Oh, Hyeongseok Kim, Hye-On Yoon

    This study used a new X-ray fluorescence (XRF)-based analytical method with better precision and sensitivity to evaluate the fluorine concentrations in soil. It was hypothesized that the XRF method with a pellet-synthesizing procedure may effectively analyze the fluorine concentrations in soil with ease and reliability. The total fluorine concentrations determined using XRF were compared with those determined using three different types of analytical protocols—incineration/distillation, alkaline fusion, and aqua regia extraction procedures. Among the three procedures, the incineration/distillation procedure did not show reliable precision and reproducibility. In contrast, the total fluorine concentrations determined using the XRF analysis were linearly correlated with those determined using the alkaline fusion and aqua regia extraction procedures. Based on the results of the Korean waste leaching procedure and toxicity characteristics leaching procedure, the leachability of fluorine from soil and waste was not directly related to total fluorine concentrations in soil. Risk assessment also revealed that the fluorine-rich soils did not show non-carcinogenic toxic effects, despite exceeding the regulation level (800 mg/kg) in South Korea for total fluorine concentrations in soil. Our results suggest that XRF analysis in combination with the newly developed pretreatment method may be a promising alternative procedure for easily and rapidly determining the total fluorine concentration in soil. However, further efforts are needed to evaluate fluorine leachability and its associated risks in fluorine-contaminated soils.


  • Degradation of phenol and sulfamethoxazole with persulfate and ozone with nano‐MnO2–biochar composites

    by Seok‐Young Oh, Hyungwoo Lee, Kwang‐Sun Ryu

    BACKGROUND: In this study, nano‐MnO2–biochar composites were synthesized as catalysts to promote the oxidation of recalcitrant organic contaminants. MnO2 nanoparticles coated on biochar were hypothesized to enhance the oxidation of phenol and sulfamethoxazole (SMX) using ozone and/or persulfate.RESULTS: The optimal percentage of MnO2 coating on the surface of biochar was determined, and the synthesis of nano‐MnO2‐coated biochar was confirmed via scanning electron microscopy–energy‐dispersive X‐ray spectroscopy (EDS), X‐ray diffraction and EDS line mapping analyses. Compared with oxidation using ozone or persulfate in the presence of either nano‐MnO2 or biochar, the synthesized nano‐MnO2–biochar composite markedly enhanced the oxidation of phenol and SMX. This was probably due to the spreading of MnO2 nanorods on the surface of biochar and the synergistic involvement of nano‐MnO2 and biochar as catalysts. X‐ray photoelectron spectroscopy analysis confirmed the involvement of Mn3+ in MnO2 to promote oxidation using ozone or persulfate. The coexistence of ozone and persulfate could also promote oxidation. Hydroxyl radicals (OH•) and persulfate radicals (SO4−•) were major reactive oxygen species for ozone and persulfate systems, respectively.CONCLUSION: Results suggest that the synthesized nano‐MnO2–biochar composites may be effective catalysts for various types of advanced oxidation processes in environmental remediation. © 2024 Society of Chemical Industry (SCI).


  • Biodegradable dust suppressants prepared from biomass-based materials: The role of viscosity and suppressed particles

    by Seok-Young Oh, Soo-Won Cha, Hyungwoo Lee

    Since the early 2010s, anthropogenic fugitive dust from industrial activities has become a serious environmental issue due to its serious hazards to the environment and human health in South Korea. So far, several dust suppressants (mostly salts) were made and used for field application. However, due to their toxic effects, it is necessary to develop a new eco-friendly suppressant that can be biodegraded in the soil and that is not hazardous to human health or the environment. Previously we have developed an eco-friendly dust suppressant with low toxicity and high suppression ability using ingredients and by-products of biodiesel production, marine biomass, and commercial vegetable oils (Tsgot and Oh, 2021, J. Air Waste Manag. Assoc. 71:1386-1396). However, due to the low biodegradability of surfactant, the synthesized dust suppressants showed limited biodegradability.As a follow-up to our previous study, we employed readily biodegradable surfactants as additives to enhance the biodegradability of the dust suppressants with the same excellent suppressing ability. To determine the optimal conditions, the synthesis and preparation of the dust suppressants was conducted using biodegradable surfactants, including coco glucoside and lauryl glucoside. The factors affecting the suppressing ability of the suppressants were examined via wind tunnel tests. These factors include the dilution factors, the viscosity of the suppressants, and the type of suppressed particles. Possible suppressing mechanisms were also discussed.


  • Reductive removal of triclosan by Sn-bearing materials and cathode powder recovered from spent Li-ion batteries

    by Seok-Young Oh, Do-Gyeom Kim, Soo-Won Cha

    Tin (Sn)-bearing materials, tin oxide (SnO) and elemental tin (Sn(0)), and cathode powder recovered from spent Li-ion batteries were examined as reductants to transform triclosan, a common antibiotic through batch experiments. The reductive removal of triclosan was rapidly observed within 1 h under the given conditions, however, the formation of a passivation layer, mainly composed of SnO2. Tin dioxide inhibited the reduction reactions on the surfaces of SnO and Sn(0). In contrast, dissolved Sn2+, formed by the addition of SnCl2, could rapidly reduce triclosan within 5 h, resulting in over 95% removal. The results support-ed the notion that the inhibition of Sn2+ formation by SnO2 on the surface acted as a rate-limiting step in the reductive removal of triclosan by Sn(0) and SnO. Conversely, the removal of triclosan by cathode powder was due to sorption and reduction, and its efficacy was limited by increased pH. A synergistic combination of Sn-bearing materials and cathode powder significantly improved the reduction of triclosan. Our findings suggest that the application of cathode Sn(0)/SnO/cathode powder with SnCl2 holds promise as an effective approach for the reductive transformation of triclosan in engineered systems.