HTHsin-Mu Tsai

Hsin-Mu Tsai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hsin-Mu Tsai has a total of 72 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • RedEye: Preventing Collisions Caused by Red-Light Running Scooters With Smartphones

    by Kuang-Shih Huang, Po-Jui Chiu, Hsin-Mu Tsai, Chih-Chung Kuo, Hui-Yu Lee, Yu-Chiang Frank Wang

    In this paper, we present a scooter collision avoidance system that can identify red-light runners (RLRs) at intersections. When the RLR behavior is detected, the system would advise the RLR to slow down immediately and warn nearby vehicles on the intersecting road in real time. In particular, we do not consider infrastructure-based solutions such as those utilizing a radar or a camera. This is because, in addition to high implementation costs, collisions can be only avoided at intersections where such infrastructure configurations are deployed. Instead, we advance an on-scooter solution using smartphones carried by scooter riders. Smartphones provide a useful platform that has a high penetration rate, more than sufficient computational power, inertial sensors to reflect the driving behavior, and the communication capability to transmit or receive information from other vehicles. In our system, we utilize a support vector machine and design an RLR classifier for learning and predicting RLR behaviors. The evaluation results show that our system is able to achieve over 70% recognition rates when distinguishing between RLR and non-RLR cases, as compared with approximately 80% recognition rates of the infrastructure-based (and higher cost) solution using a laser range finder (LADAR).


  • LightBib: Marathoner Recognition System with Visible Light Communications

    by Chiao Fu, Chia-Wen Cheng, Wen-Hsuan Shen, Yu-Lin Wei, Hsin-Mu Tsai

    This paper proposes LightBib, a novel marathoner recognition system utilizing visible light communications (VLC). In our system, each runner wears a pair of light strips which transmits the runner's ID with VLC, while cameras set along the running route can be used to decode the runner's ID from the pixels in the captured images. Our transmitter utilizes a frequency shift keying modulation, sending the information with an on-off pattern at a certain frequency. Commodity rolling shutter cameras, such as consumer pocket cameras and smartphone cameras, can be used to receive the transmission. The received images can then be post-processed, where image areas corresponding to a certain runner can be detected and recognized by extracting the ID embedded in the pixels with very high accuracy. This is useful in efficiently and accurately locate the video segments with a particular runner out of a large collection of video files. Our experimental results indicate that the average recall to identify each of the 5 runners in a single image is close to 90%.


  • Characterizing link asymmetry in vehicle-to-vehicle Visible Light Communications

    by Hua-Yen Tseng, Yu-Lin Wei, Ai-Ling Chen, Hao-Ping Wu, Hsuan Hsu, Hsin-Mu Tsai

    Recently, it has been found that Vehicular Visible Light Communications (V2LC) can effectively address several challenges faced by conventional Radio-Frequency-based (RF-based) vehicular communications. Utilizing the LED headlamps and taillights as the transmitter and a photodiode as the receiver, V2LC has high reliability even in high vehicle density scenarios, can effectively identify the transmitter of a received message, and has low cost. In this paper, we identify a new problem unique to V2LC - link asymmetry, which is defined as significant difference in incoming and outgoing links and perform the first experimental work to characterize the problem. To this end, we performed extensive optical radiation pattern measurements with off-the-shelf LED headlamps and taillights. We also collected a number of vehicle mobility traces with 2-dimensional locations with centimeter-level accuracy as well as vehicle bearing. Combining these data, we performed an analytical study to obtain an experimental distribution of received power difference of the links in opposite directions. Our results show that in 80% of the cases the received power of the outgoing link using the headlamp of our vehicle is 22 dB or more than the received power of the incoming link using the neighboring vehicle's taillight, and only 8.1% of the cases have less than 10-dB received power difference. This suggests that the link asymmetry problem is very severe in V2LC and new system design or protocol design consideration is required to prevent significant throughput degradation.


  • Open Access

    Experimental Demonstration of RGB LED-Based Optical Camera Communications

    by Pengfei Luo, Min Zhang, Zabih Ghassemlooy, Hoa Le Minh, Hsin-Mu Tsai, Xuan Tang, Lih Chieh Png, Dahai Han

    Red, green, and blue (RGB) light-emitting diodes (LEDs) are widely used in everyday illumination, particularly where color-changing lighting is required. On the other hand, digital cameras with color filter arrays over image sensors have been also extensively integrated in smart devices. Therefore, optical camera communications (OCC) using RGB LEDs and color cameras is a promising candidate for cost-effective parallel visible light communications (VLC). In this paper, a single RGB LED-based OCC system utilizing a combination of undersampled phase-shift on-off keying (UPSOOK), wavelength-division multiplexing (WDM), and multiple-input-multiple-output (MIMO) techniques is designed, which offers higher space efficiency (3 bits/Hz/LED), long-distance, and nonflickering VLC data transmission. A proof-of-concept test bed is developed to assess the bit-error-rate performance of the proposed OCC system. The experimental results show that the proposed system using a single commercially available RGB LED and a standard 50-frame/s camera is able to achieve a data rate of 150 bits/s over a range of up to 60 m.


  • A Vision-Based Hierarchical Framework for Autonomous Front-Vehicle Taillights Detection and Signal Recognition

    by Zhiyong Cui, Shao-Wen Yang, Hsin-Mu Tsai

    Automatically recognizing rear light signals of front vehicles can significantly improve driving safety by automatic alarm and taking actions proactively to prevent rear-end collisions and accidents. Much previous research only focuses on detecting brake signals at night. In this paper, we present the design and implementation of a robust hierarchical framework for detecting taillights of vehicles and estimating alert signals (turning and braking) in the daytime. The three-layer structure of the vision-based framework can obviously reduce both false positives and false negatives of taillight detection. Comparing to other existing work addressing nighttime detection, the proposed method is capable of recognizing taillight signals under different illumination circumstances. By carrying out contrast experiments with existing state-of-the-art methods, the results show the high detection rate of the framework in different weather conditions during the daytime.


  • Undersampled-PAM with subcarrier modulation for camera communications

    by Pengfei Luo, Zabih Ghassemlooy, Hoa Le Minh, Hsin-Mu Tsai, Xuan Tang

    In this paper, a novel undersampled pulse amplitude modulation with subcarrier modulation (UPAMSM) is proposed to supporting high efficiency non-flickering visible light camera communication (CamCom). A post-compensation technique is employed to reduce nonlinear effects caused by camera gamma correction. In order to eliminate phase uncertainty between transmitter and camera, and obtain the built-in gamma correction function of a camera, a dedicated framing structure is designed and applied. A test-bed with a light emitting diode (LED) and a commercial digital single-lens reflex (DSLR) camera is built to evaluate the performance of the proposed UPAMSM CamCom system. Experiment results show that this system can achieve a data rate of 250 bps (5 (bit/s)/Hz/LED) with a 50 fps camera at a distance of 1.5 m.


  • Open Access

    RollingLight

    by Hui-Yu Lee, Hao-Min Lin, Yu-Lin Wei, Hsin-I Wu, Hsin-Mu Tsai, Kate Ching-Ju Lin

    Recent literatures have demonstrated the feasibility and applicability of light-to-camera communications. They either use this new technology to realize specific applications, e.g., localization, by sending repetitive signal patterns, or consider non-line-of-sight scenarios. We however notice that line-of-sight light-to-camera communications has a great potential because it provides a natural way to enable visual association, i.e., visually associating the received information with the transmitter's identity. Such capability benefits broader applications, such as augmented reality, advertising, and driver assistance systems. Hence, this paper designs, implements, and evaluates RollingLight, a line-of-sight light-to-camera communication system that enables a light to talk to diverse off-the-shelf rolling shutter cameras. To boost the data rate and enhance reliability, RollingLight addresses the following practical challenges. First, its demodulation algorithm allows cameras with heterogeneous sampling rates to accurately decode high-order frequency modulation in real-time. Second, it incorporates a number of designs to resolve the issues caused by inherently unsynchronized light-to-camera channels. We have built a prototype of RollingLight with USRP-N200, and also implemented a real system with Arduino Mega 2560, both tested with a range of different camera receivers. We also implement a real iOS application to examine our real-time decoding capability. The experimental results show that, even to serve commodity cameras with a large variety of frame rates, RollingLight can still deliver a throughput of 11.32 bytes per second.


  • Vehicular Communications: Survey and Challenges of Channel and Propagation Models

    by Wantanee Viriyasitavat, Mate Boban, Hsin-Mu Tsai, Athanasios Vasilakos

    Vehicular communication is characterized by a dynamic environment, high mobility, and comparatively low antenna heights on the communicating entities (vehicles and roadside units). These characteristics make vehicular propagation and channel modeling particularly challenging. In this article, we classify and describe the most relevant vehicular propagation and channel models, with a particular focus on the usability of the models for the evaluation of protocols and applications. We first classify the models based on the propagation mechanisms they employ and their implementation approach. We also classify the models based on the channel properties they implement and pay special attention to the usability of the models, including the complexity of implementation, scalability, and the input requirements (e.g., geographical data input). We also discuss the less-explored aspects in vehicular channel modeling, including modeling specific environments (e.g., tunnels, overpasses, and parking lots) and types of communicating vehicles (e.g., scooters and public transportation vehicles). We conclude by identifying the underresearched aspects of vehicular propagation and channel modeling that require further modeling and measurement studies.