Govindarajan Anusooya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Govindarajan Anusooya has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Kamsundher Sathyarajasekaran
Vellore Institute of Technology, Chennai Campus, Chennai 600127, India
2 shared publications - Selvaraj Bharathiraja
Vellore Institute of Technology, Chennai, Tamil Nadu, India
2 shared publications Aaditya Gandhi
School of Computer Science and Engineering, VIT University, Chennai, India
1 shared publicationAmey Rivankar
School of Computing Science and Engineering, VIT University, Chennai, Tamil Nadu
1 shared publication- Elangovan Muniyandy
Department of Biosciences, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, India
1 shared publication Gunjan Ahuja
School of Computer Science and Engineering, VIT University, Chennai, India
1 shared publication
Latest Publications
- Open Access
Self-Supervised Wavelet-Based Attention Network for Semantic Segmentation of MRI Brain Tumor
To determine the appropriate treatment plan for patients, radiologists must reliably detect brain tumors. Despite the fact that manual segmentation involves a great deal of knowledge and ability, it may sometimes be inaccurate. By evaluating the size, location, structure, and grade of the tumor, automatic tumor segmentation in MRI images aids in a more thorough analysis of pathological conditions. Due to the intensity differences in MRI images, gliomas may spread out, have low contrast, and are therefore difficult to detect. As a result, segmenting brain tumors is a challenging process. In the past, several methods for segmenting brain tumors in MRI scans were created. However, because of their susceptibility to noise and distortions, the usefulness of these approaches is limited. Self-Supervised Wavele- based Attention Network (SSW-AN), a new attention module with adjustable self-supervised activation functions and dynamic weights, is what we suggest as a way to collect global context information. In particular, this network’s input and labels are made up of four parameters produced by the two-dimensional (2D) Wavelet transform, which makes the training process simpler by neatly segmenting the data into low-frequency and high-frequency channels. To be more precise, we make use of the channel attention and spatial attention modules of the self-supervised attention block (SSAB). As a result, this method may more easily zero in on crucial underlying channels and spatial patterns. The suggested SSW-AN has been shown to outperform the current state-of-the-art algorithms in medical image segmentation tasks, with more accuracy, more promising dependability, and less unnecessary redundancy.
Open AccessSelf-Supervised Wavelet-Based Attention Network for Semantic Segmentation of MRI Brain Tumor
To determine the appropriate treatment plan for patients, radiologists must reliably detect brain tumors. Despite the fact that manual segmentation involves a great deal of knowledge and ability, it may sometimes be inaccurate. By evaluating the size, location, structure, and grade of the tumor, automatic tumor segmentation in MRI images aids in a more thorough analysis of pathological conditions. Due to the intensity differences in MRI images, gliomas may spread out, have low contrast, and are therefore difficult to detect. As a result, segmenting brain tumors is a challenging process. In the past, several methods for segmenting brain tumors in MRI scans were created. However, because of their susceptibility to noise and distortions, the usefulness of these approaches is limited. Self-Supervised Wavele- based Attention Network (SSW-AN), a new attention module with adjustable self-supervised activation functions and dynamic weights, is what we suggest as a way to collect global context information. In particular, this network’s input and labels are made up of four parameters produced by the two-dimensional (2D) Wavelet transform, which makes the training process simpler by neatly segmenting the data into low-frequency and high-frequency channels. To be more precise, we make use of the channel attention and spatial attention modules of the self-supervised attention block (SSAB). As a result, this method may more easily zero in on crucial underlying channels and spatial patterns. The suggested SSW-AN has been shown to outperform the current state-of-the-art algorithms in medical image segmentation tasks, with more accuracy, more promising dependability, and less unnecessary redundancy.
- Open Access
- 6 February 2023
- Published by Auricle Technologies, Pvt., Ltd. in International Journal on Recent and Innovation Trends in Computing and Communication
- Vol. 11 (1) , 110-116
Power Consumption and Carbon Emission Equivalent for Virtualized Resources – An Analysis
The International Energy Agency (IEA) revealed that the worldwide energy-related carbon dioxide (CO2) situation has hit a historic high of 33.1 Giga tonnes (Gt) of CO2. 85% of the rise in emissions was due to China, India, and the United States. The increase in emissions in India was 4.8%, or 105 Mega tonnes (Mt) of CO2, with the increase in emissions being evenly distributed across the transportation and industrial sectors, according to Beloglazov et al (2011). Environmental contamination brought on by carbon emissions is harmful to the environment. As a result, there is an urgent need for the IT sectors to develop effective and efficient technology to eliminate such carbon emissions. The primary focus is on lowering carbon emissions due to widespread awareness of the issue.
- 6 February 2023
- Published by Auricle Technologies, Pvt., Ltd. in International Journal on Recent and Innovation Trends in Computing and Communication
- Vol. 11 (1) , 110-116
Open AccessPower Consumption and Carbon Emission Equivalent for Virtualized Resources – An Analysis
The International Energy Agency (IEA) revealed that the worldwide energy-related carbon dioxide (CO2) situation has hit a historic high of 33.1 Giga tonnes (Gt) of CO2. 85% of the rise in emissions was due to China, India, and the United States. The increase in emissions in India was 4.8%, or 105 Mega tonnes (Mt) of CO2, with the increase in emissions being evenly distributed across the transportation and industrial sectors, according to Beloglazov et al (2011). Environmental contamination brought on by carbon emissions is harmful to the environment. As a result, there is an urgent need for the IT sectors to develop effective and efficient technology to eliminate such carbon emissions. The primary focus is on lowering carbon emissions due to widespread awareness of the issue.
- 14 May 2019
- Published by Springer Nature in Wireless Networks
- Vol. 27 (8) , 5533-5551
Reduced carbon emission and optimized power consumption technique using container over virtual machine
- 14 May 2019
- Published by Springer Nature in Wireless Networks
- Vol. 27 (8) , 5533-5551
Reduced carbon emission and optimized power consumption technique using container over virtual machine
- 21 January 2019
- Published by SAGE Publications in Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology
- Vol. 36 (5) , 4341-4348
Reducing the carbon emission by early prediction of peak time load in a data center
Predicting the peak time load among data center and distributing the load will minimize the usage of the power consumption and also will minimize the carbon emission from data center. Reducing the carbon emission by lessening the energy consumption in a data center will impact on environment which will lead to a reduced carbon footprint. The proposed Water Shower Model (WSM) with Circular Peak Time Services (CPTS) has reduced the execution time to 10 ms comparing with Round Robin Algorithm. The load is shared among the data centers by predicting the type of request by the user as Read Only Request (ROR) or Read Write Request (RWR). The ROR will assign the load to an optimized Container and the RWR will assign the load to a Virtual Machine. CPTS is a proposed model used to measure the carbon emission right from the idle state of the server in a datacenter and till it reaches the peak time of the load and vice versa. The advantage of existing Dynamic Voltage Frequency Scaling (DVFS) techniques is used in the proposed model to optimize the resource allotment and adjust the power and speed in computing devices which allocates only the required minimal amount of power for performing a task.
- 21 January 2019
- Published by SAGE Publications in Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology
- Vol. 36 (5) , 4341-4348
Reducing the carbon emission by early prediction of peak time load in a data center
Predicting the peak time load among data center and distributing the load will minimize the usage of the power consumption and also will minimize the carbon emission from data center. Reducing the carbon emission by lessening the energy consumption in a data center will impact on environment which will lead to a reduced carbon footprint. The proposed Water Shower Model (WSM) with Circular Peak Time Services (CPTS) has reduced the execution time to 10 ms comparing with Round Robin Algorithm. The load is shared among the data centers by predicting the type of request by the user as Read Only Request (ROR) or Read Write Request (RWR). The ROR will assign the load to an optimized Container and the RWR will assign the load to a Virtual Machine. CPTS is a proposed model used to measure the carbon emission right from the idle state of the server in a datacenter and till it reaches the peak time of the load and vice versa. The advantage of existing Dynamic Voltage Frequency Scaling (DVFS) techniques is used in the proposed model to optimize the resource allotment and adjust the power and speed in computing devices which allocates only the required minimal amount of power for performing a task.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 442-451
Raspberry Pi based real time tracking system
An Emergency Position Indicating Radio Beacon or EPIRB is used to alert search and rescue services in the event of an emergency. When activated, such beacons send out a distress signal, which is monitored, and location of signal is triangulated. However, this service is mainly available for large entities like airplane and ships. Also, the EPIRB only transmits the location of the distress. The receiver of the signal has no clue about the nature and severity of the distress. In this project, using the power of Internet of things, we aim to build an Emergency Beacon that can be used by each and every individual in distress situations. The emergency beacon transmits the location of the device bearer, and the pictures of his surroundings, to one or more authorized Android devices, whenever the device bearer presses the button on the emergency beacon. The pictures of the surroundings of the emergency beacon will help the rescuer to know about the kind and severity of the distress situation, thereby aiding in better rescue. Also, the device sends periodic updates about the last known location of the device, to the server. Additionally, the authorized android device can also query the location of the device bearer at any point of time. The emergency beacon that we have built enables the device bearer to transmit a distress signal consisting of his location and photos of his surrounding conditions, to the authorized Android device in fewer than two minutes, following which the Android device bearer can send the necessary help to aid in the distress situation. The usability of the device can be further improved by investing in expensive and powerful GPS and camera modules, smaller components and better servers. Consequently, these improvements will help in reducing the size of the device, better location accuracy, higher resolution and wider-angle pictures and faster transmission of distress signals.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 442-451
Raspberry Pi based real time tracking system
An Emergency Position Indicating Radio Beacon or EPIRB is used to alert search and rescue services in the event of an emergency. When activated, such beacons send out a distress signal, which is monitored, and location of signal is triangulated. However, this service is mainly available for large entities like airplane and ships. Also, the EPIRB only transmits the location of the distress. The receiver of the signal has no clue about the nature and severity of the distress. In this project, using the power of Internet of things, we aim to build an Emergency Beacon that can be used by each and every individual in distress situations. The emergency beacon transmits the location of the device bearer, and the pictures of his surroundings, to one or more authorized Android devices, whenever the device bearer presses the button on the emergency beacon. The pictures of the surroundings of the emergency beacon will help the rescuer to know about the kind and severity of the distress situation, thereby aiding in better rescue. Also, the device sends periodic updates about the last known location of the device, to the server. Additionally, the authorized android device can also query the location of the device bearer at any point of time. The emergency beacon that we have built enables the device bearer to transmit a distress signal consisting of his location and photos of his surrounding conditions, to the authorized Android device in fewer than two minutes, following which the Android device bearer can send the necessary help to aid in the distress situation. The usability of the device can be further improved by investing in expensive and powerful GPS and camera modules, smaller components and better servers. Consequently, these improvements will help in reducing the size of the device, better location accuracy, higher resolution and wider-angle pictures and faster transmission of distress signals.
- Open Access
- 1 April 2017
- Published by Innovare Academic Sciences Pvt Ltd in Asian Journal of Pharmaceutical and Clinical Research
- Vol. 10 (13) , 162-165
ENERGY EFFICIENT LOAD BALANCING FOR CLOUD DATA CENTER
Cloud computing is the latest trend in large-scale distributed computing. It provides diverse services on demand to distributive resources such asservers, software, and databases. One of the challenging problems in cloud data centers is to manage the load of different reconfigurable virtual machines over one another. Thus, in the near future of cloud computing field, providing a mechanism for efficient resource management will be very significant. Many load balancing algorithms have been already implemented and executed to manage the resources efficiently and adequately. The objective of this paper is to analyze shortcomings of existing algorithms and implement a new algorithm which will give optimized load balancingresult.
- 1 April 2017
- Published by Innovare Academic Sciences Pvt Ltd in Asian Journal of Pharmaceutical and Clinical Research
- Vol. 10 (13) , 162-165
Open AccessENERGY EFFICIENT LOAD BALANCING FOR CLOUD DATA CENTER
Cloud computing is the latest trend in large-scale distributed computing. It provides diverse services on demand to distributive resources such asservers, software, and databases. One of the challenging problems in cloud data centers is to manage the load of different reconfigurable virtual machines over one another. Thus, in the near future of cloud computing field, providing a mechanism for efficient resource management will be very significant. Many load balancing algorithms have been already implemented and executed to manage the resources efficiently and adequately. The objective of this paper is to analyze shortcomings of existing algorithms and implement a new algorithm which will give optimized load balancingresult.
- 23 February 2016
- Published by Springer Nature
- p. 173-181
Power Optimization System for a Small PC Using Docker
- 23 February 2016
- Published by Springer Nature
- p. 173-181
Power Optimization System for a Small PC Using Docker